sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

[Serusers] Problem at SUBSCRIBE and PUBLISH
by Alois Schafferhofer 01 Jun '06

01 Jun '06

Hi, I have some problems with the pa-module. I hope you can help me... If I want to send a Publish request to the SIP Express Router, it don't stores the status into the "presentity"-table. I get following lines into the log-file: /usr/sbin/ser[10124]: handle publish request /usr/sbin/ser[10124]: get_pres_uri: _puri=sip:PDA_User@domain.com /usr/sbin/ser[10124]: handle_publish -4- p_uri= p_uri.len=23 /usr/sbin/ser[10124]: handle_publish -5- presentity=0x4069e0b8 /usr/sbin/ser[10124]: publish_presentity: no tuple for PDA_User(a)domain.com /usr/sbin/ser[10124]: handle_publish -8- paerrno=0 /usr/sbin/ser[10124]: handled publish At SUBSCRIBE, the Server answers with OK, but he sends no NOTIFY to the User Agent. Following lines are in the log-file: /usr/sbin/ser[10113]: SUBSCRIBE received /usr/sbin/ser[10113]: handle subscribe request /usr/sbin/ser[10113]: handle_subscription() entered /usr/sbin/ser[10113]: get_pres_uri: _puri=sip:TestUser@domain.com /usr/sbin/ser[10113]: update_presentity() found watcher /usr/sbin/ser[10113]: handle_subscription about to return 1: w->event_package=1 w->accept=2 p->flags=4 w->flags=1 w=0x4069e318 /usr/sbin/ser[10113]: handled subscription /usr/sbin/ser[10135]: timer_presentity: _p=0x4069e118 TestUser(a)domain.com flags=4 watchers=0x4069e318 /usr/sbin/ser[10135]: w=0x4069e318 PDA_User(a)domain.com<sip:PDA_User@domain.com> flags=1 /usr/sbin/ser[10135]: notifying PDA_User(a)domain.com _p->flags=4 _w->event_package=1 _w->accept=2 _w->status=1 /usr/sbin/ser[10135]: send_pidf_notify /usr/sbin/ser[10135]: ERROR: mk_proxy: could not resolve hostname: "domain.com" /usr/sbin/ser[10135]: ERROR: uri2proxy: bad host name in URI <sip:PDA_User@domain.com> /usr/sbin/ser[10135]: ERROR: uri2sock: Can't create a dst proxy /usr/sbin/ser[10135]: t_uac: no socket found best regards, Harisson

2 1

RE: [Serusers] Radius accounting howto
by İlker Aktuna (Koç.net) 01 Jun '06

01 Jun '06

Hi, I succeeded in sending radius start/stop packets to my Radius server. But I saw a problem when the hanging up party is different from the calling party. In the following radius start/stop pair 200000900568888885 <mailto:200000900568888885@sip.test.net> calls 200000900569871112 but 200000900569871112 is hanging up. So the BYE message is sent from 200000900569871112. How can I solve this problem so that calling party is same for both radius start stop messages ? Thu Jun 1 16:29:11 2006 Acct-Session-Id = "c73bf2494104ba79ZTdhMWJjNTYwYmMyM2E1ZjFmZWZhMDAyYWVjYzNmNjM." Gric-Timezone = 1714959921 Ascend-PRI-Number-Type = 577334379 Ascend-Route-IP = 1936289850 Gric-Roaming-Server-Id = "INVITE" Ascend-Calling-Subadddress = "sip:200000900569871112@192.168.1.23:16634;rinstance=388dfcffc2868d87;transport=udp" Gric-Request-Type = 1664561715 Ascend-Route-IPX = 577334379 Ascend-Callback-Delay = 3277318212 Acct-Status-Type = Start Service-Type = 15 User-Name = "200000900568888885(a)sip.test.net" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = 193.243.202.99 Timestamp = 1149168551 Thu Jun 1 16:29:13 2006 Acct-Session-Id = "c73bf2494104ba79ZTdhMWJjNTYwYmMyM2E1ZjFmZWZhMDAyYWVjYzNmNjM." Gric-Timezone = 1664561715 Ascend-PRI-Number-Type = 577334379 Ascend-Route-IP = 1936289850 Gric-Roaming-Server-Id = "BYE" Ascend-Calling-Subadddress = "sip:200000900568888885@192.168.1.28:16934" Gric-Request-Type = 1714959921 Ascend-Route-IPX = 577334379 Ascend-Callback-Delay = 1432970919 Acct-Status-Type = Stop Service-Type = 15 User-Name = "200000900569871112(a)sip.test.net" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = 193.243.202.99 Timestamp = 1149168553 Regards, ilker ________________________________ From: sip [mailto:sip@arcdiv.com] Sent: Thursday, June 01, 2006 1:10 AM To: İlker Aktuna (Koç.net); serusers(a)iptel.org Subject: RE: [Serusers] Radius accounting howto The purpose of the module is to take care of that all for you. I'm afraid I don't use the acc_radius module as I don't honestly see the point in separating out each and every logging function into separate modules (talk about backward thinking). I still use the older acc module compiled with radius support. The code block I sent you is all that's necessary for the logging of start/stop requests. N. [UTF-8?]On Wed, 31 May 2006 19:47:50 +0300, Ä°lker Aktuna $KoÃ§.net$ wrote > I tried that configuration. I get no errors but also no radius packet is created/sent. > after setting the flag by "setflag()" command , do I have to enter another command to send the accounting packet for that marked message ? > > Thanks, > ilker > > ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of İlker Aktuna (Koç.net) > Sent: Wednesday, May 31, 2006 5:26 PM > To: sip; serusers(a)iptel.org > Subject: RE: [Serusers] Radius accounting howto > > > Thanks for that information. But, how does Ser know to send start or stop message to radius ? > > Thanks, > ilker > > ________________________________ From: sip [mailto:sip@arcdiv.com] > Sent: Wednesday, May 31, 2006 2:13 PM > To: İlker Aktuna (Koç.net); serusers(a)iptel.org > Subject: RE: [Serusers] Radius accounting howto > > > These are essentially log flags. > > In order to log an INVITE or a BYE to the radius server (assuming your log_flag param was set to 1), you'd do something like: > > if((method=="INVITE" && !has_totag()) || method=="BYE") > { > setflag(1); > }; > > I stick that BEFORE the loose_route section of my config, as if I don't, it doesn't seem to catch things correctly. I've yet to debug why. The reason I put the extra !has_totag() in there is for my accounting, so I don't end up logging reINVITES from the remote side. > > Basically, the parameter for log_flag determines which flag you set in order to log the packet to the radius server. > > N. > > [UTF-8?]On Wed, 31 May 2006 10:48:42 +0300, Ä°lker Aktuna $KoÃ§.net$ wrote > > Hi, > > > > Thanks for your reply. I saw that in the source and changed according to them. But I still can't see any radius packets created/sent by Ser when a call is made. > > What should I add to the configuration to send start/stop packets ? > > > > Regards, > > ilker > > > > -----Original Message----- > > From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of sip > > Sent: Tuesday, May 30, 2006 8:28 PM > > To: serusers(a)iptel.org > > Subject: Re: [Serusers] Radius accounting howto > > > > Those params are valid for the old acc module compiled with radius support. > > The acc_radius module I think uses log_flag and log_missed_flag (according to the source). > > > > N. > > > > On Tue, 30 May 2006 17:54:40 +0300, Ýlker Aktuna (Koç.net) wrote > > > Hi everyone, > > > > > > I am trying to use acc_radius module with presence CVS sources. > > > I compiled the radiusclient library and compiled ser with acc_radius module. > > > > > > Then I added following lines to the config: > > > > > > loadmodule "/root/ser/lib/ser/modules/acc_radius.so" > > > modparam("acc_radius", "radius_config", > > "/usr/local/etc/radiusclient-ng/radiusclient.conf") > > > modparam("acc_radius", "service_type", 15) modparam("acc_radius", > > > "radius_flag", 1) modparam("acc_radius", "radius_missed_flag", 3) > > > modparam("acc_radius", "report_ack", 0) > > > > > > > > > But when I try to start ser, it doesn't accept 2 parameters: > > > modparam("acc_radius", "radius_flag", 1) modparam("acc_radius", > > > "radius_missed_flag", 3) > > > > > > What should be the correct syntax for these parameters ? are they required ? > > > > > > And what else should I add to the configuration to send radius-start > > > and > > radius-stop messages to the radius server ? > > > > > > Thanks, > > > ilker > > > > > > > > > > > > > > <http://387555.sigclick.mailinfo.com/sigclick/02090704/07004E09/08054C03/111…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Serusers] Serweb login problem detailed description
by Jason Zhang 01 Jun '06

01 Jun '06

When I type "http://192.168.0.154/serweb/admin/index.php" in the browser, the login page can successfully be opened. But after I fill "admin(a)192.68.0.154" and "heslo" into the username and password fields, and then click "login" button, nothing happened. The contents of the serlog is : Jun 01 15:52:19 serweb [debug] User login: values from login form: username: admin(a)192.168.0.154, password: heslo Jun 01 15:52:19 serweb [debug] User login: checking password of user with username: admin, domain: 192.168.0.154 Jun 01 15:52:19 serweb [debug] User login: authentication succeeded, uuid: d0318b851be50131032f0f73dfa3fb2b Jun 01 15:52:19 serweb [debug] User login: redirecting to page: users.php The respective software version are: serweb-0.9.4, ser-0.9.6, FC5, php-5.1.2-5, mysql-5.0.18-2.1 I have updated these config files: 1. ser.cfg fifo="/tmp/ser_fifo" fifo_mode=0666 2. httpd.conf Alias /serweb "/usr/local/www/serweb/html" 3. php.ini - short_open_tag = on register_globals = On 4. config.php $config->enable_loging = true; $config->log_level ="PEAR_LOG_DEBUG|PEAR_LOG_INFO|PEAR_LOG_EMERG|PEAR_LOG_ALERT|PEAR_LOG_CRIT|PEAR_LOG_ERR|PEAR_LOG_WARNING|PEAR_LOG_NOTICE"; 5.config_data_layer.php $config->data_sql->host[$i]['host']="192.168.0.154"; Any idea about the problem? Thanks, Jason

2 1

RE: [Users] Access Denied error
by Sam Lee 01 Jun '06

01 Jun '06

Thank you so much ! Just one last question. How do I fixed the environment variables by default ? Why can't I just declare it in openser.cfg instead of environment variable ? Thanks again! Regards, Sam -----Original Message----- From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] Sent: Thursday, June 01, 2006 4:20 PM To: Sam Lee Cc: users(a)openser.org Subject: Re: [Users] Access Denied error Hi Sam, default are openserro/openserro for DB access. If you configured (at install time) different user or password, you may use the environment variables RO_USER/RO_PW to set different values. regards, bogdan Sam Lee wrote: > Can anyone tell me why i have this problem when typing in the > following command ? > > root@ccm9:/home/test <mailto:root@ccm9:/home/test># openserctl avp > list Dumping AVPs > > ERROR 1045 (28000): Access denied for user 'openserro'@'localhost' > <mailto:%27openserro%27@%27localhost%27> (using password: YES) > root@ccm9:/home/test <mailto:root@ccm9:/home/test># > > Its obviously a userid / password error. But how do i specify what > password to use for this user openserro ? > I've changed the default password. > > Can someone assist ? > > Regards > Sam > >----------------------------------------------------------------------- >- > >_______________________________________________ >Users mailing list >Users(a)openser.org >http://openser.org/cgi-bin/mailman/listinfo/users > >

2 1

RE: [Users] /etc/init.d doesn't work
by Ty Manthey 01 Jun '06

01 Jun '06

I've tried it, but it doesn't seem to work. I get this error message: Starting openser: openser/etc/init.d/openser: line 63: start-stop-daemon: command not found My scripting sucks, because I can't see what's wrong with it... Ty Manthey -----Original Message----- From: Daniel-Constantin Mierla [mailto:daniel@voice-system.ro] Sent: Friday, May 19, 2006 9:37 To: Ty Manthey Cc: users(a)openser.org Subject: Re: [Users] /etc/init.d doesn't work Hello, On 05/19/06 01:32, Ty Manthey wrote: > I just did a removal of 0.9.5 and installed 1.0.1 for RH from RPM. My > problem is that the /etc/init.d doesn't work. > I get errors for lines 63, 69, 105 : -start-stop-daemon command not found. > This is a debian command? Should this also work for RH? > Docs also say sample /etc/init.d config file should be at > /usr/local/src/openser-1.0.1/sip-server/etc/openser.init ,but /usr/local/src > is empty. whereis openser only returns a config file and a folder with > modules. > I searched the internet but can't find a posting of a working script, just > references to the script. > that is an issue in the rpm package. Somehow I used the wrong init.d script when building it. Please use the following script to replace the existing one: http://openser.cvs.sourceforge.net/openser/sip-server/packaging/rpm/openser. init?view=markup Cheers, Daniel > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > >

3 2

[Users] sending mail in SER
by rekik refka 01 Jun '06

01 Jun '06

Hello, I'm asking how to configure a server mail with SER. I would test sending mail over SER between two MSN clients but this doesn't wok! Thanks in advance! Cheers, Rekik Refka

2 1

RE: [Serusers] mysql configuration issue
by Benjamin.George＠t-systems.com 01 Jun '06

01 Jun '06

Hi, The output of 'ldd' command on my installation is given below: ldd mysql.so libmysqlclient.so.12 => /usr/lib/libmysqlclient.so.12 (0x40023000) libz.so.1 => /usr/lib/libz.so.1 (0x4005b000) libc.so.6 => /lib/tls/i686/cmov/libc.so.6 (0x4006c000) libcrypt.so.1 => /lib/tls/i686/cmov/libcrypt.so.1 (0x4019f000) libnsl.so.1 => /lib/tls/i686/cmov/libnsl.so.1 (0x401cb000) libm.so.6 => /lib/tls/i686/cmov/libm.so.6 (0x401df000) /lib/ld-linux.so.2 => /lib/ld-linux.so.2 (0x80000000) In my installation, it is linking to libmysqlclient.so.12 instead of libmysqlclient.so.14 in your installation. i.e the only difference I am finding b/w mine and yours. Regards, Benjamin. _____ From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Thursday, June 01, 2006 11:40 AM To: George, Benjamin Cc: serusers(a)iptel.org Subject: Re: [Serusers] mysql configuration issue Have you linked against the right libraries? This is for 0.9.x on CentOS 4: [greger@siprouter modules]$ ldd mysql.so libmysqlclient.so.14 => /usr/lib/mysql/libmysqlclient.so.14 (0x00111000) libz.so.1 => /usr/lib/libz.so.1 (0x002aa000) libc.so.6 => /lib/tls/libc.so.6 (0x00c94000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x006a6000) libnsl.so.1 => /lib/libnsl.so.1 (0x00376000) libm.so.6 => /lib/tls/libm.so.6 (0x00530000) libssl.so.4 => /lib/libssl.so.4 (0x00c0a000) libcrypto.so.4 => /lib/libcrypto.so.4 (0x00e29000) /lib/ld-linux.so.2 (0x00987000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x00baa000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x0022a000) libcom_err.so.2 => /lib/libcom_err.so.2 (0x00faa000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x003fc000) libresolv.so.2 => /lib/libresolv.so.2 (0x00a5e000) libdl.so.2 => /lib/libdl.so.2 (0x0028f000) [greger@siprouter modules]$ rpm -q mysql mysql-4.1.12-3.RHEL4.1 Benjamin.George(a)t-systems.com <mailto:Benjamin.George@t-systems.com> wrote: Hi All, Thanks Adam for providing the link. But as mentioned by zhangshuai, I am also getting the same error after doing those procedures. Error messages are pasted below: stateless - initializing 0(0) Maxfwd module- initializing textops - initializing root@ubuntu:/usr/local/sbin # 0(0) register_udomain(): Invalid table version (use ser_mysql.sh reinstall) 0(0) domain_fixup(): Error while registering domain ERROR: error -1 while trying to fix configuration It will be great somebody gives some pointer to resolve this issue. Regards, Benjamin. -----Original Message----- From: serusers-bounces(a)lists.iptel.org <mailto:serusers-bounces@lists.iptel.org> [mailto:serusers-bounces@lists.iptel.org <mailto:serusers-bounces@lists.iptel.org> ] On Behalf Of zhangshuai Sent: Thursday, June 01, 2006 6:57 AM To: serusers Subject: Re: Re: [Serusers] mysql configuration issue Dear All, I use mysql-4.1.15 and encountered the same error. After I did as the webpage said, I got another error: "invalid table version". I compiled the source code from cvs: cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router Is it the latest stable version? Thanks for your answers. Benjamin.George(a)t-systems.com <mailto:Benjamin.George@t-systems.com> wrote: *root@ubuntu:/usr/local/sbin # 0(0) new_connection(): Client does not support authentication protocol requested by server; consider upgrading MySQL client* http://dev.mysql.com/doc/refman/5.0/en/old-client.html <http://dev.mysql.com/doc/refman/5.0/en/old-client.html> Regards Adam _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers> = = = = = = = = = = = = = = = = = = = = _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers>

1 0

[Users] Access Denied error
by Sam Lee 01 Jun '06

01 Jun '06

Can anyone tell me why i have this problem when typing in the following command ? root@ccm9:/home/test <mailto:root@ccm9:/home/test> # openserctl avp list Dumping AVPs ERROR 1045 (28000): Access denied for user 'openserro'@'localhost' <mailto:'openserro'@'localhost'> (using password: YES) root@ccm9:/home/test <mailto:root@ccm9:/home/test> # Its obviously a userid / password error. But how do i specify what password to use for this user openserro ? I've changed the default password. Can someone assist ? Regards Sam

2 1

RE: [Users] Access Denied error
by Sam Lee 01 Jun '06

01 Jun '06

Anyone to help in this case ? I've changed the readonly user for openser and i'm not sure how to point openser to use the different password instead of the default one. Please help ! ________________________________ From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Sam Lee Sent: Thursday, June 01, 2006 12:04 PM To: users(a)openser.org Subject: [Users] Access Denied error Can anyone tell me why i have this problem when typing in the following command ? root@ccm9:/home/test <mailto:root@ccm9:/home/test> # openserctl avp list Dumping AVPs ERROR 1045 (28000): Access denied for user 'openserro'@'localhost' <mailto:'openserro'@'localhost'> (using password: YES) root@ccm9:/home/test <mailto:root@ccm9:/home/test> # Its obviously a userid / password error. But how do i specify what password to use for this user openserro ? I've changed the default password. Can someone assist ? Regards Sam

1 0

[Users] AVPops: inconsistent usage of DB scheme
by Franz＠ycn.com 01 Jun '06

01 Jun '06

Hi, regarding my previous E-mail I suppose that it might be an indexes problem in the table structure. I have defined both columns "auth_user" and "id" as primary keys because I want to associate up to 4 AVPs to an "auth_user" with different "id"s. But when I insert a second (different) "id" to the same "auth-user" into the table I get a mysql-error #1062 - Duplicate entry for key 1. Therefore I will now clarify the right way of defining primary keys :-) . regards Franz

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users