sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

RE: [Users] Mixing uri_db and auth_db
by Douglas Garstang 05 Jun '06

05 Jun '06

I just upgraded from 1.0.1 to the current cvs version. Ran openser and got this: Jun 5 11:54:47 apollo openser: parse error (156,21-24): syntax error Jun 5 11:54:47 apollo openser: parse error (156,39-40): bad forwardargument Here's the relevant section of openser.cfg. Line 156 is the line with: forward(uri:host, uri:port); # # Outgoing PSTN Calls - Dispatch to Audiocodes # if ( src_ip == xxx.187.142.203 || src_ip == xxx.187.142.204 || src_ip == xxx.187.142.232 || src_ip == xxx.187.142.201 || src_ip == xxx.187.142.231 ) { sl_send_reply("100","Trying"); xlog ("L_INFO","Outbound PSTN call. Dispatching to Audiocodes"); ds_select_dst("2","0"); forward(uri:host, uri:port); return; } What's wrong with this? The example in the 1.1 documentation has the same use of the forward() command! Douglas.

1 0

Re: [Serusers] DNS SRV sending call to second priority
by Jiri Kuthan 05 Jun '06

05 Jun '06

indeed -- that's currently an unsupported feature being worked on. -jiri At 17:46 05/06/2006, Paul Antinori (pantinor) wrote: >Content-class: urn:content-classes:message >Content-Type: multipart/alternative; > boundary="----_=_NextPart_001_01C688B7.3390EF42" > >I am using DNS SRV query for stateful routing of calls like in my script below. I see the SRV query is going through from SER. > >My problem is that when the call times out to priority 1 A record, SER does not send it to priority 2. > >Thanks for help. > >vxml-1 IN A 10.86.xxx.1 >vxml-2 IN A 10.86.xxx.2 >vxml-3 IN A 10.86.xxx.3 > >; Priority Weight Port Target >_sip._tcp.vxml.pats.cisco.com. SRV 1 1 5060 vxml-1.pats.cisco.com. > SRV 2 1 5060 vxml-2.pats.cisco.com. > SRV 3 1 5060 vxml-3.pats.cisco.com. >_sip._udp.vxml.pats.cisco.com. SRV 1 1 5060 vxml-1.pats.cisco.com. > SRV 2 1 5060 vxml-2.pats.cisco.com. > SRV 3 1 5060 vxml-3.pats.cisco.com. > >route{ > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > break; > }; > > if (uri=~"^sip:7") { > log(1, "Found 7*\n"); > rewritehostport("vxml.pats.cisco.com"); > route(1); > break; > } > > if (uri=~"^sip:9") { > log(1, "Found 9*\n"); > rewritehostport("ringtone.pats.cisco.com"); > route(1); > break; > } > > log(1,"Could Not Match DN to a Route\n"); > > route(1); >} > >route[1] >{ > > #use "t_relay" for STATEFUL forwarding > #for STATELESS forwarding use this syntax: forward(10.86.xx.xx,5060); > > if (!t_relay()) { > sl_reply_error(); > }; >} >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Users] Mixing uri_db and auth_db
by Edgar Barbosa 05 Jun '06

05 Jun '06

Hi all, I'm having a weird behaviour when mixing auth_db and uri_db. With the following openser.cfg, the xlog("L_INFO", "TEST\n") is never executed... seems that openser just hangs up... If I remove the uri_db it works... If I remove the auth_db it works too... The problem seems to happen when I mix both... Any idea of what may be wrong? I'm using the latest version (openser 1.0.1). Thanks debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes reply_to_via=no check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" loadmodule "/usr/lib/openser/modules/mysql.so" loadmodule "/usr/lib/openser/modules/sl.so" loadmodule "/usr/lib/openser/modules/auth.so" loadmodule "/usr/lib/openser/modules/auth_db.so" loadmodule "/usr/lib/openser/modules/uri_db.so" loadmodule "/usr/lib/openser/modules/xlog.so" modparam("uri_db", "db_url", "mysql://root@192.168.1.104/openser") modparam("auth_db", "db_url", "mysql://root@192.168.1.104/openser") route { xlog("L_INFO", "TEST\n"); }

2 7

[Serusers] DNS SRV sending call to second priority
by Paul Antinori (pantinor) 05 Jun '06

05 Jun '06

I am using DNS SRV query for stateful routing of calls like in my script below. I see the SRV query is going through from SER. My problem is that when the call times out to priority 1 A record, SER does not send it to priority 2. Thanks for help. vxml-1 IN A 10.86.xxx.1 vxml-2 IN A 10.86.xxx.2 vxml-3 IN A 10.86.xxx.3 ; Priority Weight Port Target _sip._tcp.vxml.pats.cisco.com. SRV 1 1 5060 vxml-1.pats.cisco.com. SRV 2 1 5060 vxml-2.pats.cisco.com. SRV 3 1 5060 vxml-3.pats.cisco.com. _sip._udp.vxml.pats.cisco.com. SRV 1 1 5060 vxml-1.pats.cisco.com. SRV 2 1 5060 vxml-2.pats.cisco.com. SRV 3 1 5060 vxml-3.pats.cisco.com. route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (uri=~"^sip:7") { log(1, "Found 7*\n"); rewritehostport("vxml.pats.cisco.com"); route(1); break; } if (uri=~"^sip:9") { log(1, "Found 9*\n"); rewritehostport("ringtone.pats.cisco.com"); route(1); break; } log(1,"Could Not Match DN to a Route\n"); route(1); } route[1] { #use "t_relay" for STATEFUL forwarding #for STATELESS forwarding use this syntax: forward(10.86.xx.xx,5060); if (!t_relay()) { sl_reply_error(); }; }

1 0

RE: [Users] Avpops tutorial
by Douglas Garstang 05 Jun '06

05 Jun '06

> -----Original Message----- > From: Juha Heinanen [mailto:jh@tutpro.com] > Sent: Sunday, June 04, 2006 11:01 AM > To: Douglas Garstang > Cc: Bogdan-Andrei Iancu; Sam Lee; users(a)openser.org > Subject: RE: [Users] Avpops tutorial > > > Douglas Garstang writes: > > > I'm not one of the developers. > > you don't need to be. in fact, it would give developers' more time to > develop, i.e., write code. How can I write the documentation when I don't understand how the software works? Are you suggesting I learn C and look at the code? I'm of the opinion that developers should write documentation. If other people try to do it, they make bad assumptions based on what they THINK they know. They then write bad or wrong documentation which others read, and in turn also write bad documentation. It's not a good model. Doug

2 1

[Users] Accounting Stop time is not inserting in radacct tables in Radius by using openser
by raviprakash sunkara 05 Jun '06

05 Jun '06

Hi please this Issuse ....... Radius server debug mode....... rad_recv: Accounting-Request packet from host 192.168.2.55:32807, id=58, length=221 Acct-Status-Type = Failed Service-Type = IAPP-AP-Check Sip-Response-Code = 0 Sip-Method = INVITE User-Name = "555(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> " Calling-Station-Id = "sip:555@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> " Called-Station-Id = "sip:666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> " Sip-Translated-Request-URI = "sip:666@192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> " Acct-Session-Id = "E54D81BC-C463-446F-B0AF-DE1C3C6EC33D(a)192.168.2.21<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> " Sip-To-Tag = "n/a" Sip-From-Tag = "3693743074" Sip-Cseq = "34571" NAS-Port = 5060 Acct-Delay-Time = 0 NAS-IP-Address = 192.168.2.55 Processing the preacct section of radiusd.conf modcall: entering group preacct for request 11 modcall[preacct]: module "preprocess" returns noop for request 11 rlm_realm: Looking up realm "192.168.2.55" for User-Name = "555(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> " rlm_realm: No such realm "192.168.2.55" modcall[preacct]: module "suffix" returns noop for request 11 modcall: leaving group preacct (returns noop) for request 11 Processing the accounting section of radiusd.conf modcall: entering group accounting for request 11 rlm_acct_unique: Hashing 'NAS-Port = 5060,Client-IP-Address = 192.168.2.55,NAS-IP-Address = 192.168.2.55,Acct-Session-Id = "E54D81BC-C463-446F-B0AF-DE1C3C6EC33D(a)192.168.2.21<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…>",User-Name = "555(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> "' rlm_acct_unique: Acct-Unique-Session-ID = "ef0513de749b7034". modcall[accounting]: module "acct_unique" returns ok for request 11 radius_xlat: '/usr/local/var/log/radius/radacct/192.168.2.55/detail-20060605' rlm_detail: /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d expands to /usr/local/var/log/radius/radacct/192.168.2.55/detail-20060605 rlm_detail: Failed to create directory /usr/local/var/log/radius/radacct/192.168.2.55: Permission denied modcall[accounting]: module "detail" returns fail for request 11 modcall: leaving group accounting (returns fail) for request 11 Finished request 11 Going to the next request Below one is openser.cfg file please help me #************************************************************************************************* modparam("usrloc", "db_mode", 2) modparam("auth_db", "password_column", "password") modparam("auth_db", "calculate_ha1", yes) modparam("usrloc|acc|auth_db|group|msilo", "db_url", "mysql://openser:openserrw@localhost/openser") ########333333 modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc","log_missed_flag",2) modparam("acc", "log_fmt", "cdfimorstup") modparam("acc", "failed_transaction_flag",3) modparam("acc", "report_cancels", 1) modparam("acc","report_ack",0) modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) modparam("acc","radius_flag",1) modparam("acc","radius_missed_flag",2) modparam("acc","service_type",16) modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") ##########33 modparam("nathelper","natping_interval",30) modparam("nathelper","ping_nated_only",1) modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") #################33 modparam("rr", "enable_full_lr", 1) ############################################### route { # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("13")) { sl_send_reply("483","Too Many Hops........................!"); exit; }; if ( msg:len > max_len ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol record_route(); # loose-route processing if (loose_route()) { t_relay(); setflag(1); exit; }; # account completed transactions via syslog setflag(1); setflag(2); if(uri==myself) { if(method=="REGISTER") { if(!radius_www_authorize("192.168.2.55")) { www_challenge("192.168.2.55","1"); exit; }; save("location"); if (m_dump()) { log("MSILO: offline messages dumped - if they were\n"); }else{ log("MSILO: no offline messages dumped\n"); }; exit; }; if(method=="INVITE"|| method=="ACK") { acc_rad_request("Start"); record_route(); force_rtp_proxy(); #setflag(1); t_on_reply("1"); }; if (method=="BYE") { record_route(); }; if (method=="MESSAGE") { log(1, "MESSAGE\n"); setflag(1); /* set for accounting (the same value as in log_flag!) */ }; if (method=="BYE" || method=="CANCEL") { #log (1, "BYE or CANCEL\n"); #setflag(1); acc_rad_request("Stop"); setflag(1); }; if(!lookup("location")) { sl_send_reply("404","Woo......... NOt found"); }; }; lookup("aliases"); setflag(2); if(!t_relay()) { sl_reply_error(); }; } onreply_route[1] { if(status=~"[0-9][0-9][0-9]") { force_rtp_proxy(); }; } ....................... Naslist file in raddb(radius_server..... 192.168.2.55 radiustest other 192.168.2.20 hyperion1 other 192.168.2.21 hyperion2 other .........................hintsGroups.......... 555(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> NAS-IP-ADDRESS == 192.168.2.21 666(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> NAS-IP-ADDRESS == 192.168.2.20 ...................................... .................radiusclient.conf ........ authserver 192.168.2.55 acctserver 192.168.2.55 ......................servers.................. 192.168.2.55 radiustest 192.168.2.20 hyperion1 192.168.2.21 hyperion2 ...................Radacct tables.......... id UserName Attribute op value --------------------------------------------------- 4 555(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> Password == test2 5 666(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> Password == test3 -------------------------------------------------------- RadgroupCheck...... id GroupName Attribute op value 5 voip Auth-Type := Digest ************************************************************ RadgroupReply... id GroupName Attribute op Value 56 voip Service-Type := Sip-Session ............................................................ UserGroup UserName Group Priority 555(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> Voip 4 666(a)192.168.2.55<https://email.secureserver.net/view.php?folder=INBOX.Sent_Items&uid=69#Comp…> voip 5 ---------------------------------------------------------- -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com <b>

1 0

[Serusers] How to Install and configure SER
by Lan 05 Jun '06

05 Jun '06

Dear Friends and Supporters! I am new to SER, and I tried to download and install the ser from onsip.org, but I don't know how to start configure the ser. Doesn't anyone have step by step or direct me to somewhere I can find the information about setup and configure the SER. I would be very appreciated! Regards, Lan.

3 2

[Serusers] LDAP Authentication
by Marco Passarinho 05 Jun '06

05 Jun '06

I've read that there is a module for SER to support LDAP. But it is not used for authentication/authorization, it's used for translating phone numbers to URI adresses and the opposite. That module is for SER 0.8.x. I would like to know if it is possible making the authentication of UAs in a LDAP tree instead of in a POSTGRESQL db in newer SER versions. Where can I find documentation about this? I tryed to find documents but it was not easy. Sorry about my bad English... :) Thanks Marco Passarinho

1 0

[Serusers] presence libs compiling error
by zhangshuai 05 Jun '06

05 Jun '06

Dear All, I checkout the ser source code from cvs: cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router And when I compiled the code as the presence handbook said: #cd sip_router/lib #make -f Makefile.ser install Then I got the following errors: cc -DNAME='"ser"' -DVERSION='"0.10.99-dev41"' -DARCH='"i386"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 3.2.2"' -D__CPU_i386 -D__OS_linux -DSER_VER=10099 -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DHAVE_SELECT -DSER -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -falign-loops -mcpu=athlon -g -Wall -I/usr/local/src/sip_router/lib -I/usr/local/src/sip_router/lib/.. -I/usr/include/libxml2 -c xml_utils.c xml_utils.c:35: `XML_PARSE_NOERROR' undeclared here (not in a function) xml_utils.c:35: `XML_PARSE_NOWARNING' undeclared here (not in a function) make[1]: *** [xml_utils.o] Error 1 make[1]: Leaving directory `/usr/local/src/sip_router/lib/xcap' make: [xcap] Error 2 (ignored) ...... cc -DNAME='"ser"' -DVERSION='"0.10.99-dev41"' -DARCH='"i386"' -DOS='linux_' -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 3.2.2"' -D__CPU_i386 -D__OS_linux -DSER_VER=10099 -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DHAVE_SELECT -DSER -g -O9 -funroll-loops -Wcast-align -Wall -minline-all-stringops -falign-loops -mcpu=athlon -g -Wall -I/usr/local/src/sip_router/lib -I/usr/local/src/sip_router/lib/.. -I/usr/include/libxml2 -c xml_utils.c xml_utils.c:35: `XML_PARSE_NOERROR' undeclared here (not in a function) xml_utils.c:35: `XML_PARSE_NOWARNING' undeclared here (not in a function) make[1]: *** [xml_utils.o] Error 1 make[1]: Leaving directory `/usr/local/src/sip_router/lib/presence' make: [presence] Error 2 (ignored) I check my /usr/include/libxml2. There is only one directory: libxml. I wonder whether anything is wrong with my libxml2? And how to fix that? Thanks a lot!

2 1

[Users] Serweb hint: usrloc db_mode must be write-through
by G.Jacobsen 05 Jun '06

05 Jun '06

Just for future reference: When using Serweb usrloc db_mode must be write-through not write-back - otherwise plenty of expired bindings occur in openser and Serweb shows wrong/outdated info. Enjoy.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users