sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

[Serusers] Modifying "From" field in INVITE message
by İlker Aktuna (Koç.net) 08 Jun '06

08 Jun '06

Hi, I need to modify From field of INVITE messages. Is that possible ? How ? The username is too long because of some database issues; but the outgoing caller id (from uri) should be last 8 digits of the username. How can I do that ? Thanks, ilker <http://387555.sigclick.mailinfo.com/sigclick/060A060D/0C074E08/00064D0A/152…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Users] SIP/2.0 484 Address Incomplete
by ram 08 Jun '06

08 Jun '06

Hi all I have downloaded from openser and iam trying to integrate voice mail with asterisk I have read all the docs in the document site after config, and people recomendation iam able to run the openser successfully and able to fix the problem calling out side but when the local user not available, iam sending to asterisk voice mail and i get error SIP/2.0 484 Address Incomplete in my x-lite client any suggestions ram

3 4

RE: [Serusers] novice issue
by Benjamin.George＠t-systems.com 08 Jun '06

08 Jun '06

Hi, Check library (.so files) paths in ser.cfg file and if not correct, give the correct path for each library. Then run ser again, it will definitely work. Regards, Benjamin. -----Original Message----- From: Alexandr Dubovikov [mailto:shurik@start4.info] Sent: Thursday, June 08, 2006 5:14 PM To: Shyamsundar, Purkayastha (Purkayastha)** CTR ** Cc: 'serusers(a)lists.iptel.org' Subject: Re: [Serusers] novice issue On Thu, Jun 08, 2006 at 04:48:24PM +0530, Shyamsundar, Purkayastha (Purkayastha)** CTR ** wrote: > Hi all > > Just started using ser but i am stuck at the first step itself > > i downloaded ser-0.9.6_linux_i386.tar > > untared it , set the cfg file and modules in correct path as per cfg file > and ran ./ser from the sbin directory > > and it says > > ERROR in cfg file ( 24 errors) at first, check you configuration with "ser -c" and set the debug level to 4 in your ser.cfg , after it you can see where is a mistake. Wbr, -- Alexandr Dubovikov * baron@iRC RusNet * mailto:shurik@start4.info AD1-UANIC * ICQ: 122351182 * http://www.start4.info _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] novice issue
by Shyamsundar, Purkayastha (Purkayastha)** CTR ** 08 Jun '06

08 Jun '06

Hi all Just started using ser but i am stuck at the first step itself i downloaded ser-0.9.6_linux_i386.tar untared it , set the cfg file and modules in correct path as per cfg file and ran ./ser from the sbin directory and it says ERROR in cfg file ( 24 errors) if i comment out the loadmodule statements on the cfg files then the errors reduce but inspite of verifying the correct path several times its not getting through. That means its reading the cfg file correctly but not loading the modules or not able to interpret loadmodule command maybe Please help me thanks in advance Shyam

2 1

[Users] SER status page
by Alfred E. Heggestad 08 Jun '06

08 Jun '06

hi I have been using OpenSER from CVS for some months now, as a SIP proxy for a few domains. the OpenSER server has been very stable ;) my goal is to have an experimental service using latest version of all components. we have a small PHP script to display the SER status, reading from the MySQL database. you can see how it works here: http://ser.symbianos.org/ (if you want to download the PHP script, go to the bottom of the page) Many thanks for supporting the OpenSER server, I find both the code and the docs to be excellent ;) /alfred -- Alfred E. Heggestad <aeh(a)db.org> Web: http://aeh.db.org/ VoIP: <sip:alfredh@symbianos.org> Phone: +47 21 98 71 20 Mobile: +47 98 23 67 05 Skype: alfredheggestad

1 0

[Users] Re: ACK is sent before the re-INVITE to OpenSER
by Gene Willingham 08 Jun '06

08 Jun '06

I thought I was experiencing the same issue. But after looking at it closely, I discovered the ACK is not being sent. I am not an expert with OpenSER and may not be using the correct terminology, but I will try to explain what I see happening. I am using Openser as a gateway to our provider. We send invites from asterisk to openser and we forward the invite to the provider. We are using rewritehost followed by t_relay to route the requests. When we receive the 200 ok back from the provider we relay the message back to asterisk. Asterisk responds with an ACK followed by the reinvites. The issue we are seeing is the ack is not relayed at all, only the reinvites get relayed. We then added the following to the top of openser.cfg: # --------------------------------------------- # Asterisk reinvite issue relay ACK immediately # --------------------------------------------- if (method=="ACK") { forward(uri:host, uri:port); route(1); }; Now the ACK is being handled correctly. We are clearly missing something. I suspect the same thing is happening on inbound calls with the relaying of 200 ok messages. Gene ------------------------------ Message: 6 Date: Wed, 10 May 2006 10:54:52 +0200 From: Klaus Darilion <klaus.mailinglists(a)pernau.at> Subject: Re: [Users] ACK is sent before the re-INVITE to OpenSER, but the proxy relays the re-INVITE first (call flow in the body). To: Bogdan-Andrei Iancu <bogdan(a)voice-system.ro> Cc: users(a)openser.org Message-ID: <4461AA5C.7090403(a)pernau.at> Content-Type: text/plain; charset=ISO-8859-1; format=flowed IMO the receiving client should be tolerant and accept the reINVITe although the ACK is missing/delayed, as the reINVITE is an implict ACK. regards klaus Bogdan-Andrei Iancu wrote: > Hi Alexandre, > > if I'm not wrong ,this topic was previously discussed on the mailing > list. The idea is that openser cannot guarantee that messages will be > sent in same order as received. And this because of parallel > multi-process execution. > > the idea is that the CC1 shouldn;t send a re-INVITE so fast and also the > GW should wait a little bit to see if ACK is delayed or not. > > if you are running in full debug, the logs will might help you to see > how the ACK and INVITE gets swapped during processing. > > regards, > bogdan > <<snip>>

2 1

[Users] Please help me for TLS Configuration
by Ferianto siregar 08 Jun '06

08 Jun '06

Dear all, My name is Ferianto. I am a college student. I am still new in voip system. A few months ago, i read from the internet about how to communicate using voip, and the usage of TLS to secure the communication in voip. I am interested in it and i have taken it as the topic of my paper in my college. So, i try to build it in my college. For that reason, i have read many tutorials about TLS system, especially from www.openser.org, because I plan to build the TLS system by using openser packet. So, i try to understand tls.htm file from www.openser.org. But, when i try to Configure it, i get a problem. I am confused what the first thing to do for configuration. I have asked it to my lecturer, but no body can help me in my college because TLS is new in my college.I am ALONE. Can any one guide me to build it and so i can finish my paper? Please help me.....Please..... Thanks Ferianto --------------------------------- New Yahoo! Messenger with Voice. Call regular phones from your PC and save big.

3 3

Re: [Users] cant see Bye when the call is diconnected
by Padmaja RV 08 Jun '06

08 Jun '06

Hi! as you said, i have nt initially included record_route. that should be the reason y the server is processing only transaction and not the entire call. and sorry, it is only till the 200 Ok i see the responses going thru the server, after which the uas learn each other's address and directly talk to each other. i have traced the uas and i see the bye. but now i have included record_route function in both the INVITE and the BYE code block. still the bye is not going thru the proxy. also when the invite is routed from the proxy to the called UA, i dont see the record_route header in the invite. is any other module needed to be loaded other than mediaproxy for the bye to work? Please let me know..... Thanks a lot for your help, Padmaja ----- Original Message ----- From: <fredler(a)ycn.com> To: "Padmaja RV" <padmaja.rv(a)vodcalabs.com> Cc: <users(a)openser.org> Sent: Tuesday, June 06, 2006 5:35 PM Subject: Re: [Users] cant see Bye when the call is diconnected >> i have openser running and supports authentication and calling,. i made >> calls and verified that the media session is established both ways. now >> if i >> disconnect the call, i cant see the BYE request sent. in the ethereal i >> dont >> see any call related messages after ACK is sent for the INVITE. please >> help >> me..... > > I think you did not set "record-route" in your cfg. > But than you also should not see ACK. > > Are you able to trace on you User Agent? > Than you would see where BYE is sent. > > regards > Franz >

2 1

Re: [Serusers] Problem with Presence
by Vaclav Kubart 08 Jun '06

08 Jun '06

This is probably problem with bad mysql client/server versions. It was described with solution somewhere in this list - try to search archives. May be, I have sent you bad version of the client library. Sorry. Vaclav On Thu, Jun 08, 2006 at 11:50:46AM +0200, Alois Schafferhofer wrote: > Sorry for the mistake with the LD_LIBRARY_PATH. > > I tried to register to SER but it didn't answer. > > If I command "serctl start", I get the message: > "Starting SER: PID file /var/run/ser.pid does not exist - SER start failed > > If I command "ser", I get the message: > > OEFEG:/base/ser/directory/sbin # ser > 0(7433) WARNING: fix_socket_list: could not rev. resolve 10.15.200.19 > 0(7433) WARNING: fix_socket_list: could not rev. resolve 10.21.200.50 > 0(7433) WARNING: fix_socket_list: could not rev. resolve 10.15.200.19 > 0(7433) WARNING: fix_socket_list: could not rev. resolve 10.21.200.50 > Listening on > udp: 127.0.0.1 [127.0.0.1]:5060 > udp: 10.15.200.19 [10.15.200.19]:5060 > udp: 10.21.200.50 [10.21.200.50]:5060 > udp: 10.0.0.11 [10.0.0.11]:5060 > tcp: 127.0.0.1 [127.0.0.1]:5060 > tcp: 10.15.200.19 [10.15.200.19]:5060 > tcp: 10.21.200.50 [10.21.200.50]:5060 > tcp: 10.0.0.11 [10.0.0.11]:5060 > Aliases: > tcp: OEFEG:5060 > tcp: OEFEG.fh-joanneum.at:5060 > tcp: localhost:5060 > udp: OEFEG:5060 > udp: OEFEG.fh-joanneum.at:5060 > udp: localhost:5060 > *: fh-joanneum.at:* > 0(7433) init_tcp: using epoll_lt as the io watch method (auto detected) > 0(7435) AVPops - initializing > OEFEG:/base/ser/directory/sbin # 0(7435) Maxfwd module- initializing > 0(7435) using 'none' rls-subscription authorization! > 0(7435) using 'none' subscription authorization for watcher info! > 0(7435) new_connection: Client does not support authentication protocol > requested by server; > consider upgrading MySQL client > 0(7435) uri_db:mod_init: Unable to open database connection > 0(7435) init_mod(): Error while initializing module uri_db > > > Alois > > > >From: Vaclav Kubart <vaclav.kubart(a)iptel.org> > >To: Alois Schafferhofer <schaffi_lui(a)hotmail.com> > >Subject: Re: [Serusers] Problem with Presence > >Date: Thu, 8 Jun 2006 11:05:43 +0200 > > > >Read presence handbook (stored on that FTP too) - you have to set > >LD_LIBRARY_PATH before running ser. > > Vaclav > > > >On Thu, Jun 08, 2006 at 10:57:24AM +0200, Alois Schafferhofer wrote: > >> Thank you for your help. > >> > >> I have successfully compiled ser. > >> But now I have some problems with starting ser. > >> > >> If I command "serctl start", I get the message: > >> "Starting SER: PID file /var/run/ser.pid does not exist - SER start > >failed > >> > >> If I command "ser", I get the message: > >> bad config file (47 errors) > >> > >> > >> I have following lines in the log-message: > >> > >> > >> Jun 8 12:43:33 OEFEG ser: ERROR: load_module: could not open module > >> </base/ser/directory/lib/ser/modules/dialog.so>: lib_ser_cds.so: cannot > >open > >> shared object file: No such file or directory > >> Jun 8 12:43:33 OEFEG ser: parse error (36,13-14): failed to load module > >> Jun 8 12:43:33 OEFEG ser: ERROR: load_module: could not open module > >> </base/ser/directory/lib/ser/modules/rls.so>: lib_ser_xcap.so: cannot > >open > >> shared object file: No such file or directory > >> Jun 8 12:43:33 OEFEG ser: parse error (37,13-14): failed to load module > >> Jun 8 12:43:33 OEFEG ser: ERROR: load_module: could not open module > >> </base/ser/directory/lib/ser/modules/pa.so>: lib_ser_xcap.so: cannot > >open > >> shared > >> object file: No such file or directory > >> Jun 8 12:43:33 OEFEG ser: parse error (38,13-14): failed to load module > >> Jun 8 12:43:33 OEFEG ser: ERROR: load_module: could not open module > >> </base/ser/directory/lib/ser/modules/presence_b2b.so>: lib_ser_xcap.so: > >> cannot > >> open shared object file: No such file or directory > >> Jun 8 12:43:33 OEFEG ser: parse error (39,13-14): failed to load module > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (76,21-22): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (77,21-22): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (78,21-22): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (79,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (80,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (81,19-20): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (82,19-20): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <rls> > >> found > >> Jun 8 12:43:33 OEFEG ser: parse error (83,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (85,19-20): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (87,19-20): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (89,21-22): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (91,21-22): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (92,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (94,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (95,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (97,20-21): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (99,19-20): Can't set module > >parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (101,19-20): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (103,21-22): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (105,21-22): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching <pa> > >found > >> Jun 8 12:43:33 OEFEG ser: parse error (107,20-21): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (110,20-21): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (112,20-21): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (114,20-21): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (116,20-21): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (118,20-21): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (120,22-23): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: set_mod_param_regex: No module matching > >> <presence_b2b> found > >> Jun 8 12:43:33 OEFEG ser: parse error (122,19-20): Can't set module > >> parameter > >> Jun 8 12:43:33 OEFEG ser: parse error (190,32-33): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:33 OEFEG ser: parse error (195,32-33): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:33 OEFEG ser: parse error (201,30-31): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:33 OEFEG ser: parse error (204,24-25): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:33 OEFEG ser: parse error (218,35-36): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:33 OEFEG ser: parse error (222,36-37): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (230,26-27): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (233,31-32): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (246,32-33): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (260,36-37): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (261,28-29): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (282,21-22): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (286,24-25): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (304,24-25): unknown command, > >missing > >> loadmodule? > >> Jun 8 12:43:34 OEFEG ser: parse error (312,28-29): unknown command, > >missing > >> loadmodule? > >> > >> > >> regards, > >> Alois > >> > >> > >> > >> > >> >From: Vaclav Kubart <vaclav.kubart(a)iptel.org> > >> >To: Alois Schafferhofer <schaffi_lui(a)hotmail.com> > >> >CC: serusers(a)iptel.org > >> >Subject: Re: [Serusers] Problem with Presence > >> >Date: Thu, 8 Jun 2006 09:13:01 +0200 > >> > > >> >You need to have libcurl3-dev installed and something similar for mysql > >> >(I think libmysqlclient12-dev). > >> > Vaclav > >> > > >> >On Thu, Jun 08, 2006 at 09:09:06AM +0200, Alois Schafferhofer wrote: > >> >> Thank you. > >> >> > >> >> I downloaded the version "ser-0.10.99-dev35-pa-4.1", but I had > >problems > >> >to > >> >> build the files. > >> >> > >> >> With "make install include_modules="pa rls mysql", I get some Errors: > >> >> > >> >> ERROR: module modules/mysql/mysql.so not compiled > >> >> ERROR: module modules/pa/pa.so not compiled > >> >> ERROR: module modules/presence_b2b/presence_b2b.so not compiled > >> >> ERROR: module modules/rls/rls.so not compiled > >> >> > >> >> > >> >> make[1]: Entering directory > >> >> `/root/Desktop/Presence/ser-0.10.99-dev35-pa-4.1/modules/mysql' > >> >> gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall > >> >> -minline-all-stringops -falign-loops > >> >> -mcpu=i686 -DNAME='"ser"' -DVERSION='"0.10.99-dev35-pa-4.1"' > >> >-DARCH='"i386"' > >> >> -DOS='"linux"' -DCOMPILER='"gcc 3.3.5"' -D__CPU_i386 -D__OS_linux > >> >> -DSER_VER=10099 > >> >> -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP > >> >> -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE > >> >> -DHAVE_RESOLV_RES -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT > >> >> -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 > >> >> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL > >> >> -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM > >> >> -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -I/usr/local/include -I > >> >> /usr/local/include/mysql -I/usr/local/mysql/include > >-I/usr/include/mysql > >> >-c > >> >> db_mod.c -o db_mod.o > >> >> db_mod.c:40:19: mysql.h: No such file or directory > >> >> db_mod.c: In function `mysql_mod_init': > >> >> db_mod.c:93: warning: implicit declaration of function > >> >> `mysql_get_client_info' > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> db_mod.c:93: warning: format argument is not a pointer (arg 3) > >> >> make[1]: *** [db_mod.o] Error 1 > >> >> make[1]: Leaving directory > >> >> `/root/Desktop/Presence/ser-0.10.99-dev35-pa-4.1/modules/mysql' > >> >> > >> >> make[1]: Entering directory > >> >> `/root/Desktop/Presence/ser-0.10.99-dev35-pa-4.1/modules/pa' > >> >> gcc -shared -Wl,-O2 -Wl,-E auth.o dlist.o hslot.o location.o > >message.o > >> >> notify.o offline_winfo.o > >> >> pa_mod.o paerrno.o pdomain.o person_elements.o pres_notes.o > >presentity.o > >> >> ptime.o publish.o > >> >> qsa_interface.o reply.o rpc.o status_query.o subscribe.o > >tuple_notes.o > >> >> watcher.o winfo_doc.o -L > >> >> /usr/local/lib -L/usr/pkg/lib -L../../lib/xcap -L../../lib/presence > >> >> -L../../lib/cds -l_ser_xcap > >> >> -l_ser_presence -l_ser_cds -o pa.so > >> >> > >> > >>/usr/lib/gcc-lib/i586-suse-linux/3.3.5/../../../../i586-suse-linux/bin/ld: > >> >> cannot find -l_ser_xcap > >> >> collect2: ld returned 1 exit status > >> >> make[1]: *** [pa.so] Error 1 > >> >> make[1]: Leaving directory > >> >> `/root/Desktop/Presence/ser-0.10.99-dev35-pa-4.1/modules/pa' > >> >> > >> >> make[1]: Entering directory > >> >`/root/Desktop/Presence/ser-0.10.99-dev35-pa- > >> >> 4.1/modules/presence_b2b' > >> >> gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall > >> >> -minline-all-stringops -falign-loops > >> >> -mcpu=i686 -DNAME='"ser"' -DVERSION='"0.10.99-dev35-pa-4.1"' > >> >-DARCH='"i386"' > >> >> -DOS='"linux"' -DCOMPILER='"gcc 3.3.5"' -D__CPU_i386 -D__OS_linux > >> >> -DSER_VER=10099 > >> >> -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP > >> >> -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE > >> >> -DHAVE_RESOLV_RES -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT > >> >> -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 > >> >> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL > >> >> -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM > >> >> -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -I/usr/include/libxml2 -I > >> >> /usr/local/include/libxml2 -I/usr/local/include -Wall -I../../lib > >-DSER > >> >> -I../.. -c events_mod.c -o > >> >> events_mod.o > >> >> events_mod.c:7:23: curl/curl.h: No such file or directory > >> >> events_mod.c: In function `events_mod_init': > >> >> events_mod.c:78: warning: implicit declaration of function > >> >> `curl_global_init' > >> >> events_mod.c:78: error: `CURL_GLOBAL_ALL' undeclared (first use in > >this > >> >> function) > >> >> events_mod.c:78: error: (Each undeclared identifier is reported only > >> >once > >> >> events_mod.c:78: error: for each function it appears in.) > >> >> make[1]: *** [events_mod.o] Error 1 > >> >> make[1]: Leaving directory > >`/root/Desktop/Presence/ser-0.10.99-dev35-pa- > >> >> 4.1/modules/presence_b2b' > >> >> > >> >> make[1]: Entering directory > >> >> `/root/Desktop/Presence/ser-0.10.99-dev35-pa-4.1/modules/rls' > >> >> gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -Wall > >> >> -minline-all-stringops -falign-loops > >> >> -mcpu=i686 -DNAME='"ser"' -DVERSION='"0.10.99-dev35-pa-4.1"' > >> >-DARCH='"i386"' > >> >> -DOS='"linux"' -DCOMPILER='"gcc 3.3.5"' -D__CPU_i386 -D__OS_linux > >> >> -DSER_VER=10099 > >> >> -DCFG_DIR='"/usr/local/etc/ser/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP > >> >> -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE > >> >> -DHAVE_RESOLV_RES -DDBG_QM_MALLOC -DFAST_LOCK -DADAPTIVE_WAIT > >> >> -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 > >> >> -DHAVE_UNION_SEMUN -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL > >> >> -DHAVE_MSGHDR_MSG_CONTROL -DHAVE_ALLOCA_H -DHAVE_TIMEGM > >> >> -DHAVE_EPOLL -DHAVE_SIGIO_RT -DHAVE_SELECT -I/usr/include/libxml2 -I > >> >> /usr/local/include/libxml2 -I/usr/local/include -Wall -I../../lib > >-DSER > >> >> -I../.. -c rls_mod.c -o rls_mod.o > >> >> rls_mod.c:8:23: curl/curl.h: No such file or directory > >> >> rls_mod.c: In function `rls_mod_init': > >> >> rls_mod.c:176: warning: implicit declaration of function > >> >`curl_global_init' > >> >> rls_mod.c:176: error: `CURL_GLOBAL_ALL' undeclared (first use in this > >> >> function) > >> >> rls_mod.c:176: error: (Each undeclared identifier is reported only > >once > >> >> rls_mod.c:176: error: for each function it appears in.) > >> >> make[1]: *** [rls_mod.o] Error 1 > >> >> make[1]: Leaving directory > >> >> `/root/Desktop/Presence/ser-0.10.99-dev35-pa-4.1/modules/rls' > >> >> > >> >> > >> >> I have no idea what I'm doing wrong. > >> >> > >> >> Best regards, > >> >> Alois > >> >> > >> >> > >> >> >From: Vaclav Kubart <vaclav.kubart(a)iptel.org> > >> >> >To: Alois Schafferhofer <schaffi_lui(a)hotmail.com> > >> >> >CC: serusers(a)iptel.org > >> >> >Subject: Re: [Serusers] Problem with Presence > >> >> >Date: Thu, 8 Jun 2006 08:30:47 +0200 > >> >> > > >> >> >0.9.3 is too old version. I recommend you to use presence snapshot. > >> >> > Vaclav > >> >> > > >> >> >On Wed, Jun 07, 2006 at 02:47:10PM +0200, Alois Schafferhofer wrote: > >> >> >> I use the PA-module of the SER version 0.9.3. Generally, I use the > >> >RPM > >> >> >> package for Suse. > >> >> >> > >> >> >> Maybe I have an error in my config-file. > >> >> >> > >> >> >> > >> >> >> > >> >> >> # > >> >> >> # $Id: ser.cfg,v 1.25.2.1 2005/02/18 14:30:44 andrei Exp $ > >> >> >> # > >> >> >> # simple quick-start config script > >> >> >> # > >> >> >> # ----------- global configuration parameters > >> >------------------------ > >> >> >> #debug=3 # debug level (cmd line: -dddddddddd) > >> >> >> #fork=yes > >> >> >> #log_stderror=yes # (cmd line: -E) > >> >> >> /* Uncomment these lines to enter debugging mode > >> >> >> fork=no > >> >> >> log_stderror=yes > >> >> >> */ > >> >> >> check_via=no # (cmd. line: -v) > >> >> >> dns=no # (cmd. line: -r) > >> >> >> rev_dns=no # (cmd. line: -R) > >> >> >> port=5060 > >> >> >> children=2 > >> >> >> alias="fh-joanneum.at" > >> >> >> listen=10.15.200.19 > >> >> >> fifo="/tmp/ser_fifo" > >> >fifo_db_url="mysql://ser:heslo@127.0.0.1:3306/ser" > >> >> >> sip_warning=yes > >> >> >> # ------------------ module loading > >> >---------------------------------- > >> >> >> # Uncomment this if you want to use SQL database > >> >> >> #loadmodule "/usr/lib/ser/modules/mysql.so" > >> >> >> loadmodule "/usr/lib/ser/modules/sl.so" > >> >> >> loadmodule "/usr/lib/ser/modules/tm.so" > >> >> >> loadmodule "/usr/lib/ser/modules/rr.so" > >> >> >> loadmodule "/usr/lib/ser/modules/maxfwd.so" > >> >> >> loadmodule "/usr/lib/ser/modules/usrloc.so" > >> >> >> loadmodule "/usr/lib/ser/modules/registrar.so" > >> >> >> loadmodule "/usr/lib/ser/modules/textops.so" > >> >> >> loadmodule "/usr/lib/ser/modules/mysql.so" > >> >> >> loadmodule "/usr/lib/ser/modules/pa.so" > >> >> >> # Uncomment this if you want digest authentication > >> >> >> # mysql.so must be loaded ! > >> >> >> loadmodule "/usr/lib/ser/modules/auth.so" > >> >> >> loadmodule "/usr/lib/ser/modules/auth_db.so" > >> >> >> # ----------------- setting module-specific parameters > >> >--------------- > >> >> >> # -- usrloc params -- > >> >> >> #modparam("usrloc", "db_mode", 0) > >> >> >> # Uncomment this if you want to use SQL database > >> >> >> # for persistent storage and comment the previous line > >> >> >> modparam("usrloc", "db_mode", 2) > >> >> >> # -- auth params -- > >> >> >> # Uncomment if you are using auth module > >> >> >> # > >> >> >> modparam("auth_db", "calculate_ha1", yes) > >> >> >> # > >> >> >> # If you set "calculate_ha1" parameter to yes (which true in this > >> >> >config), > >> >> >> # uncomment also the following parameter) > >> >> >> # > >> >> >> modparam("auth_db", "password_column", "password") > >> >> >> # -- rr params -- > >> >> >> # add value to ;lr param to make some broken UAs happy > >> >> >> modparam("rr", "enable_full_lr", 1) > >> >> >> modparam("pa", "default_expires", 3600) > >> >> >> modparam("pa", "default_priority_percentage", 50) > >> >> >> modparam("pa", "timer_interval", 10) > >> >> >> modparam("pa", "use_db", 1) > >> >> >> modparam("pa", "use_place_table", 1) > >> >> >> modparam("pa", "use_bsearch", 0) > >> >> >> modparam("pa", "use_location_package", 1) > >> >> >> modparam("pa", "db_url", "mysql://ser:heslo@127.0.0.1:3306/ser") > >> >> >> modparam("pa", "pa_domain", "fh-joanneum.at") > >> >> >> modparam("pa", "presentity_table", "presentity") > >> >> >> modparam("pa", "presentity_contact_table", "presentity_contact") > >> >> >> modparam("pa", "watcherinfo_table", "watcherinfo") > >> >> >> modparam("pa", "place_table", "place") > >> >> >> modparam("pa", "new_watcher_pending", 0) > >> >> >> modparam("pa", "callback_update_db", 50) > >> >> >> #modparam("pa", "callback_lock_pdomain", 1) > >> >> >> modparam("pa", "new_tuple_on_publish", 1) > >> >> >> modparam("pa", "pidf_priority", 1) > >> >> >> # ------------------------- request routing logic > >------------------- > >> >> >> # main routing logic > >> >> >> route{ > >> >> >> # initial sanity checks -- messages with > >> >> >> # max_forwards==0, or excessively long requests > >> >> >> if (!mf_process_maxfwd_header("10")) { > >> >> >> sl_send_reply("483","Too Many Hops"); > >> >> >> break; > >> >> >> }; > >> >> >> if (msg:len >= 2048 ) { > >> >> >> sl_send_reply("513", "Message too big"); > >> >> >> break; > >> >> >> }; > >> >> >> # we record-route all messages -- to make sure that > >> >> >> # subsequent messages will go through our proxy; that's > >> >> >> # particularly good if upstream and downstream entities > >> >> >> # use different transport protocol > >> >> >> if (!method=="REGISTER") record_route(); > >> >> >> # subsequent messages withing a dialog should take the > >> >> >> # path determined by record-routing > >> >> >> if (loose_route()) { > >> >> >> # mark routing logic in request > >> >> >> append_hf("P-hint: rr-enforced\r\n"); > >> >> >> route(1); > >> >> >> break; > >> >> >> }; > >> >> >> if (!uri==myself) { > >> >> >> # mark routing logic in request > >> >> >> append_hf("P-hint: outbound\r\n"); > >> >> >> route(1); > >> >> >> break; > >> >> >> }; > >> >> >> # if the request is for other domain use UsrLoc > >> >> >> # (in case, it does not work, use the following command > >> >> >> # with proper names and addresses in it) > >> >> >> if (uri==myself) { > >> >> >> if (method=="SUBSCRIBE") { > >> >> >> log(1, "SUBSCRIBE received"); > >> >> >> if (!t_newtran()) { > >> >> >> log(1, "newtran error\n"); > >> >> >> sl_reply_error(); > >> >> >> }; > >> >> >> log(1, "handle subscribe request\n"); > >> >> >> handle_subscription("Registrar"); > >> >> >> log(1, "handled subscription\n"); > >> >> >> break; > >> >> >> }; > >> >> >> if (method=="REGISTER") { > >> >> >> # Uncomment this if you want to use digest authentication > >> >> >> if (!www_authorize("fh-joanneum.at", "subscriber")) { > >> >> >> www_challenge("fh-joanneum.at", "0"); > >> >> >> break; > >> >> >> }; > >> >> >> save("location"); > >> >> >> break; > >> >> >> }; > >> >> >> if (method=="PUBLISH") { > >> >> >> if (!t_newtran()) { > >> >> >> log(1, "newtran error\n"); > >> >> >> sl_reply_error(); > >> >> >> # break; > >> >> >> }; > >> >> >> log(1, "handle publish request\n"); > >> >> >> handle_publish("Registrar"); > >> >> >> log(1, "handled publish\n"); > >> >> >> break; > >> >> >> }; > >> >> >> lookup("aliases"); > >> >> >> if (!uri==myself) { > >> >> >> append_hf("P-hint: outbound alias\r\n"); > >> >> >> route(1); > >> >> >> break; > >> >> >> }; > >> >> >> # native SIP destinations are handled using our USRLOC DB > >> >> >> if (!lookup("location")) { > >> >> >> sl_send_reply("404", "Not Found"); > >> >> >> break; > >> >> >> }; > >> >> >> }; > >> >> >> append_hf("P-hint: usrloc applied\r\n"); > >> >> >> route(1); > >> >> >> } > >> >> >> route[1] > >> >> >> { > >> >> >> # send it out now; use stateful forwarding as it works reliably > >> >> >> # even for UDP2TCP > >> >> >> if (!t_relay()) { > >> >> >> sl_reply_error(); > >> >> >> }; > >> >> >> } > >> >> >> > >> >> >> > >> >> >> > >> >> >> Regards, > >> >> >> Alois > >> >> >> > >> >> >> > >> >> >> >From: Vaclav Kubart <vaclav.kubart(a)iptel.org> > >> >> >> >To: Alois Schafferhofer <schaffi_lui(a)hotmail.com> > >> >> >> >CC: serusers(a)lists.iptel.org > >> >> >> >Subject: Re: [Serusers] Problem with Presence > >> >> >> >Date: Wed, 7 Jun 2006 09:51:03 +0200 > >> >> >> > > >> >> >> >Hi. > >> >> >> >What version do you use? For presence are recommended "presence > >> >> >> >snapshots" published on ftp.iptel.org. > >> >> >> > > >> >> >> >You need to set db_mode and db_url parameters like: > >> >> >> > > >> >> >> >modparam("pa", "use_db", 1) > >> >> >> >modparam("pa", "db_url", "mysql://ser:heslo@127.0.0.1:3306/ser") > >> >> >> > > >> >> >> > Vaclav > >> >> >> > > >> >> >> >On Tue, Jun 06, 2006 at 02:08:23PM +0200, Alois Schafferhofer > >wrote: > >> >> >> >> Hi, > >> >> >> >> > >> >> >> >> If I want to send a Publish request to the SIP Express Router, > >it > >> >> >> >doesn't > >> >> >> >> store the status into the "presentity"-table. > >> >> >> >> > >> >> >> >> I get following lines into the log-file: > >> >> >> >> > >> >> >> >> /usr/sbin/ser[10124]: handle publish request > >> >> >> >> /usr/sbin/ser[10124]: get_pres_uri: _puri=sip:PDA_User at > >> >> >mydomain.com > >> >> >> >> /usr/sbin/ser[10124]: handle_publish -4- p_uri= > >p_uri.len=23 > >> >> >> >> /usr/sbin/ser[10124]: handle_publish -5- presentity=0x4069e0b8 > >> >> >> >> /usr/sbin/ser[10124]: publish_presentity: no tuple for PDA_User > >at > >> >> >> >> mydomain.com > >> >> >> >> /usr/sbin/ser[10124]: handle_publish -8- paerrno=0 > >> >> >> >> /usr/sbin/ser[10124]: handled publish > >> >> >> >> > >> >> >> >> Best regards, > >> >> >> >> Alois > >> >> >> >> > >> >> >> >> > >> >> >> >> _______________________________________________ > >> >> >> >> Serusers mailing list > >> >> >> >> Serusers(a)lists.iptel.org > >> >> >> >> http://lists.iptel.org/mailman/listinfo/serusers > >> >> >> > >> >> > >> >

1 0

[Users] Who can help me to make it work when openser is behind NAT.
by fusheng.lin＠gmail.com 08 Jun '06

08 Jun '06

Hello, Everyone: I am newbie to openser. I would like to build a softwitch system by openser. It is work when client behind NAT, But it don't work when the openser server behind NAT where I add a DNAT rule in the router. Who can help me to address the issue ? FYI: CLEINT --------------------->Router ++++++++++++++++++++++++++++++ Openser 202.99.1.23 202.99.3.5 192.168.0.1 192.168.0.2 I use sipphone software to connect 202.99.3.5(5060) It don't work ... Jerry.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users