sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

RE: [Serusers] mysql configuration issue
by Benjamin.George＠t-systems.com 08 Jun '06

08 Jun '06

Hi, I feel it is not a linking issue. This is something related to table version of table 'subscriber'/'domain'/'location', I think so. So it will be great if some body can throw some light in to this issue. Here go the error messages once again: [ stateless - initializing root@ubuntu:/usr/local/etc/ser # 0(0) Maxfwd module- initializing textops - initializing 0(0) register_udomain(): Invalid table version (use ser_mysql.sh reinstall) 0(0) domain_fixup(): Error while registering domain ERROR: error -1 while trying to fix configuration ] My SER version is 0.9.x And MySql version is 4.1.x OS: Ubuntu linux Thanks and regards, Benjamin. _____ From: Greger V. Teigre [mailto:greger@teigre.com] Sent: Thursday, June 01, 2006 11:40 AM To: George, Benjamin Cc: serusers(a)iptel.org Subject: Re: [Serusers] mysql configuration issue Have you linked against the right libraries? This is for 0.9.x on CentOS 4: [greger@siprouter modules]$ ldd mysql.so libmysqlclient.so.14 => /usr/lib/mysql/libmysqlclient.so.14 (0x00111000) libz.so.1 => /usr/lib/libz.so.1 (0x002aa000) libc.so.6 => /lib/tls/libc.so.6 (0x00c94000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x006a6000) libnsl.so.1 => /lib/libnsl.so.1 (0x00376000) libm.so.6 => /lib/tls/libm.so.6 (0x00530000) libssl.so.4 => /lib/libssl.so.4 (0x00c0a000) libcrypto.so.4 => /lib/libcrypto.so.4 (0x00e29000) /lib/ld-linux.so.2 (0x00987000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x00baa000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x0022a000) libcom_err.so.2 => /lib/libcom_err.so.2 (0x00faa000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x003fc000) libresolv.so.2 => /lib/libresolv.so.2 (0x00a5e000) libdl.so.2 => /lib/libdl.so.2 (0x0028f000) [greger@siprouter modules]$ rpm -q mysql mysql-4.1.12-3.RHEL4.1 Benjamin.George(a)t-systems.com <mailto:Benjamin.George@t-systems.com> wrote: Hi All, Thanks Adam for providing the link. But as mentioned by zhangshuai, I am also getting the same error after doing those procedures. Error messages are pasted below: stateless - initializing 0(0) Maxfwd module- initializing textops - initializing root@ubuntu:/usr/local/sbin # 0(0) register_udomain(): Invalid table version (use ser_mysql.sh reinstall) 0(0) domain_fixup(): Error while registering domain ERROR: error -1 while trying to fix configuration It will be great somebody gives some pointer to resolve this issue. Regards, Benjamin. -----Original Message----- From: serusers-bounces(a)lists.iptel.org <mailto:serusers-bounces@lists.iptel.org> [mailto:serusers-bounces@lists.iptel.org <mailto:serusers-bounces@lists.iptel.org> ] On Behalf Of zhangshuai Sent: Thursday, June 01, 2006 6:57 AM To: serusers Subject: Re: Re: [Serusers] mysql configuration issue Dear All, I use mysql-4.1.15 and encountered the same error. After I did as the webpage said, I got another error: "invalid table version". I compiled the source code from cvs: cvs -d :pserver:anonymous@cvs.berlios.de:/cvsroot/ser checkout sip_router Is it the latest stable version? Thanks for your answers. Benjamin.George(a)t-systems.com <mailto:Benjamin.George@t-systems.com> wrote: *root@ubuntu:/usr/local/sbin # 0(0) new_connection(): Client does not support authentication protocol requested by server; consider upgrading MySQL client* http://dev.mysql.com/doc/refman/5.0/en/old-client.html <http://dev.mysql.com/doc/refman/5.0/en/old-client.html> Regards Adam _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers> = = = = = = = = = = = = = = = = = = = = _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org> http://lists.iptel.org/mailman/listinfo/serusers <http://lists.iptel.org/mailman/listinfo/serusers>

2 1

[Users] RE: [Devel] Memory Leak in latest cvs version?
by Douglas Garstang 08 Jun '06

08 Jun '06

Bogdan, Below is the first part of openser.cfg. As you can see, I am not loading a lot of modules. This system has 4GB of RAM. The errors are still occurring. I did have more modules, and removed them, and the problem still persists. How can I get that memory dump? Sending the process a USR1 has no effect. # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/textops.so" loadmodule "/usr/local/lib/openser/modules/xlog.so" loadmodule "/usr/local/lib/openser/modules/dispatcher.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/openser/modules/auth.so" #loadmodule "/usr/local/lib/openser/modules/auth_db.so" #loadmodule "/usr/local/lib/openser/modules/uri_db.so" > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Thursday, June 08, 2006 3:20 AM > To: Douglas Garstang > Cc: Users(a)openser.org; devel(a)openser.org > Subject: Re: [Devel] Memory Leak in latest cvs version? > > > Douglas, > > in this case, it seams you have a module that loads a lot of stuff at > startup in shared memory. Like USRLOC for location and > aliases, LCR for > rule...... > > is it your case? > > regards, > bogdan > > > Douglas Garstang wrote: > > >Thanks Bogdan. > > > >A few things of note. Firstly, I'm using the default memory > size, and secondly, the system has processed hardly any > calls, IF ANY. Given these two confiditions, it would seem > that problem is abnormal, not normal. > > > >Douglas. > > > > > > > >>-----Original Message----- > >>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > >>Sent: Wednesday, June 07, 2006 9:23 AM > >>To: Douglas Garstang > >>Cc: Users(a)openser.org; devel(a)openser.org > >>Subject: Re: [Devel] Memory Leak in latest cvs version? > >> > >> > >>Hi Douglas, > >> > >>I just put together a wiki page about debugging memory > >>problems. Please see: > >> http://openser.org/dokuwiki/doku.php?id=memory > >> > >>and follow the instructions. > >> > >>regards, > >>bogdan > >> > >> > >>Douglas Garstang wrote: > >> > >> > >> > >>>I'm wondering if there's a memory leak or something in the > >>> > >>> > >>latest cvs version of openser. > >> > >> > >>>Only been running it for a while, processing very few calls, > >>> > >>> > >>and this was appearing... > >> > >> > >

1 0

RE: [Users] Sucess Stories of openser+asterisk+voicemail
by Ricardo Martinez 08 Jun '06

08 Jun '06

Hello. Yes, i made some test a few weeks ago, and works great. Take a look at : http:// www.onsip.org <http://www.onsip.org> . BTW, is there any news about the issue 5a for the onsip manual? Thanks! Ricardo Martinez.- -----Mensaje original----- De: ram [mailto:talk2ram@gmail.com] Enviado el: Jueves, 08 de Junio de 2006 11:10 Para: users(a)openser.org Asunto: [Users] Sucess Stories of openser+asterisk+voicemail Hi does any one have success stories of above said suject i been trying from past 7days, but not able to success could some one succeeded the same ram

3 3

[Users] Bug in branch handling?
by Federico Giannici 08 Jun '06

08 Jun '06

I'm using OpenSER 1.0.0 under OpenBSD 3.9-stable amd64. An user of our SIP server have a VoIP PBX called "voispeed". Their calls always hung up after 20 seconds because they say that our SIP server doesn't correctly handle the branch parameter. They say that RFC3261 specifies that ACK messages for a 2xx reply MUST use a different "branch" parameter (contrary to ACK messages to non 2xx replies). But it seems that OpenSER doesn't recognize these ACKs with different branch parameter and keeps sending the 200 reply. Can somebody confirm this bug in OpenSER? Ant solution? Thanks. -- ___________________________________________________ __ |- giannici(a)neomedia.it |ederico Giannici http://www.neomedia.it ___________________________________________________

3 4

[Users] Sucess Stories of openser+asterisk+voicemail
by ram 08 Jun '06

08 Jun '06

Hi does any one have success stories of above said suject i been trying from past 7days, but not able to success could some one succeeded the same ram

1 0

RE: [Serusers] SER with Heartbeat in two node cluster
by Barta János 08 Jun '06

08 Jun '06

Hello! You have to make some change in the conf.file of Node1 & Node2: 1, In the ser.cfg: ------------------------- alias="clusterIP" 2, In the /etc/heartbeat/haresources: --------------------------------------------------- cluster1 clusterIP/mask/eth1/broadcast IPsrcaddr::clusterIP ser By Jani -----Original Message----- From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Stephen Helfen Sent: Friday, June 02, 2006 1:31 PM To: serusers(a)iptel.org Subject: [Serusers] SER with Heartbeat in two node cluster All, I am trying to implement a two-node cluster using heartbeat on two SIP SER proxies running on Linux. I am having a bit of trouble as it appears the two proxies are sharing messages rather than acting as an active and standby. Has anyone succesfully implemented this type of configuration and/or does anyone know a good reference for enabling this configuration? Thanks in advance. Steve _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________________________________________ Hogy el ne tévedjen! A navigáció még soha nem volt ennyire egyszerű! PDA-k széles választékban - DigitalMarket http://ad.adverticum.net/b/cl,1,6022,99786,162268/click.prm

1 0

RE: [Serusers] Modifying "From" field in INVITE message
by İlker Aktuna (Koç.net) 08 Jun '06

08 Jun '06

Hi, Ok; I found it. Thanks for your quick reply. Regards, ilker -----Original Message----- From: Alexandr Dubovikov [mailto:shurik@start4.info] Sent: Thursday, June 08, 2006 5:22 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)iptel.org Subject: Re: [Serusers] Modifying "From" field in INVITE message On Thu, Jun 08, 2006 at 05:05:01PM +0300, ?lker Aktuna (Ko?.net) wrote: > Thanks for your reply. How can I learn more on the subject ? take the README file from modules/textops. It'll help you. > > For example I want to replace the user part of uri with last 8 digits. Sorry, I don't understand what you mean in "last 8 digits" ? > > Thanks, > ilker > Wbr, -- Alexandr Dubovikov * baron@iRC RusNet * mailto:shurik@start4.info AD1-UANIC * ICQ: 122351182 * http://www.start4.info <http://387555.sigclick.mailinfo.com/sigclick/070C0004/03074C08/010C4B03/144…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

1 0

[Users] OpenSER 1.0.x Main Index
by Edson 08 Jun '06

08 Jun '06

Hi, everybody... Just to let the list know that there are 4 new links on the main page of the OpenSER Dokuwiki (http://openser.org/dokuwiki/doku.php?id=start). Each one points to Index Pages: - Parameters Index (http://openser.org/dokuwiki/doku.php?id=index_of_openser_1.0.x_parameters); - Functions Index (http://openser.org/dokuwiki/doku.php?id=index_of_openser_1.0.x_functions); - Examples Index (http://openser.org/dokuwiki/doku.php?id=index_of_openser_1.0.x_examples); and - FIFO Commands Index (http://openser.org/dokuwiki/doku.php?id=index_of_openser_1.0.x_fifo_command s). All entries point to the original Module's README (where the parm/function, etc was mentioned/defined). So You will find many repeated entries, but this is intentional, since many modules use/export the same parameter/function names. As suggested by Gerry, on the side of each link/entry is another link that drives You to a page where user comments can be written. Have fun, and help complement/correct it. Edson.

2 2

RE: [Serusers] Modifying "From" field in INVITE message
by İlker Aktuna (Koç.net) 08 Jun '06

08 Jun '06

Thanks for your reply. How can I learn more on the subject ? For example I want to replace the user part of uri with last 8 digits. Thanks, ilker -----Original Message----- From: Alexandr Dubovikov [mailto:shurik@start4.info] Sent: Thursday, June 08, 2006 4:08 PM To: İlker Aktuna (Koç.net) Cc: serusers(a)iptel.org Subject: Re: [Serusers] Modifying "From" field in INVITE message On Thu, Jun 08, 2006 at 03:51:02PM +0300, ?lker Aktuna (Ko?.net) wrote: > Hi, Hi, > > I need to modify From field of INVITE messages. > Is that possible ? How ? > sample: if(method=="INVITE") { subst('/^(From|f):(.*)sip:.*@/\1:\2sip:2222/g'); } -- Alexandr Dubovikov * baron@iRC RusNet * mailto:shurik@start4.info AD1-UANIC * ICQ: 122351182 * http://www.start4.info <http://387555.sigclick.mailinfo.com/sigclick/02090501/0C044E00/04074E06/911…> _____________________________________________________________________________________________________________________________________________ Bu e-posta mesaji kisiye ozel olup, gizli bilgiler iceriyor olabilir. Eger bu e-posta mesaji size yanlislikla ulasmissa, icerigini hic bir sekilde kullanmayiniz ve ekli dosyalari acmayiniz. Bu durumda lutfen e-posta mesajini kullaniciya hemen geri gonderiniz ve tum kopyalarini mesaj kutunuzdan siliniz. Bu e-posta mesaji, hic bir sekilde, herhangi bir amac icin cogaltilamaz, yayinlanamaz ve para karsiligi satilamaz. Bu e-posta mesaji viruslere karsi anti-virus sistemleri tarafindan taranmistir. Ancak yollayici, bu e-posta mesajinin - virus koruma sistemleri ile kontrol ediliyor olsa bile - virus icermedigini garanti etmez ve meydana gelebilecek zararlardan dogacak hicbir sorumlulugu kabul etmez. This message is intended solely for the use of the individual or entity to whom it is addressed , and may contain confidential information. If you are not the intended recipient of this message or you receive this mail in error, you should refrain from making any use of the contents and from opening any attachment. In that case, please notify the sender immediately and return the message to the sender, then, delete and destroy all copies. This e-mail message, can not be copied, published or sold for any reason. This e-mail message has been swept by anti-virus systems for the presence of computer viruses. In doing so, however, sender cannot warrant that virus or other forms of data corruption may not be present and do not take any responsibility in any occurrence. _____________________________________________________________________________________________________________________________________________

2 1

[Users] openser with nathelper/rtpproxy as SBC
by Ovidiu Sas 08 Jun '06

08 Jun '06

Hi all, I'm trying to get openser to act as an SBC using the mediaproxy module and the rtpproxy (built from the cvs). openser is configured to run in a multihomed mode. I'm starting rtpproxy in debug mode: rtpproxy -f -l 10.110.1.174/10.111.5.15 The rtpproxy is binding to both IPs. When an INVITE is received on the 10.110 interface, I call force_rtp_proxy(). Regrdless of the "i" or "e" parameter that I pass to the force_rtp_proxy(), the rtpproxy is replying with the same IP. output from rtpproxy if force_rtp_proxy("i"): received command "UI 4a2fabe1-24c7fe03(a)10.110.50.4 10.110.48.7 10046 60e4ff4a-soma;1" new session 4a2fabe1-24c7fe03(a)10.110.50.4, tag 60e4ff4a-soma;1 requested, type strong new session on a port 35000 created, tag 60e4ff4a-soma;1 pre-filling caller's address with 10.110.48.7:10046 sending reply "35000 10.110.1.174 " output from rtpproxy if force_rtp_proxy("e"): received command "UE 44709fe7-423307f6(a)10.110.49.134 10.110.48.7 10012 1f713156-soma;1" new session 44709fe7-423307f6(a)10.110.49.134, tag 1f713156-soma;1 requested, type strong new session on a port 35002 created, tag 1f713156-soma;1 pre-filling caller's address with 10.110.48.7:10012 sending reply "35002 10.110.1.174 " The IP address sent out in the outgoing INVITE is 10.110.1.174 instead of 10.111.5.15. Is this the expected behaviour from the rtpproxy? Do I need to pass other params to the force_rtp_proxy() function? Regards, -ovi

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users