sr-users

sr-users@lists.kamailio.org

10 participants
37461 discussions

Re: [Users] AVPops Arrays?
by Daniel-Constantin Mierla 26 Jun '06

26 Jun '06

On 06/26/06 03:19, Kelvin Williams wrote: > > I’m contemplating the storage of a lot of values (15 or so) for users > using AVPops. My question would be the MySQL server and any potential > bottleneck it may create. > > Is it possible to perform one database hit and extract all of the AVPs > into an array which could then be referenced throughout the transaction? > with the cvs heade version you can use avp_db_query(). Cheers, Daniel > Thanks, > > Kw > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

1 0

RE: [Serusers] Facing problems while downloading SEMS
by Benjamin.George＠t-systems.com 26 Jun '06

26 Jun '06

Hi Aimable, Thanks a lot buddy! I got whatever I wanted from that link. Now let me compile it properly and test it with my application. By the way I would like to ask you two more things: 1. SER 0.9.6 is already running on my m/c and my question is, before installing SEMS, any other modules have to be incorporated in to the SER? 2. Whether SER support Voice XML (VXML)? Regards, Benjamin. _____ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Aimable Habiyakare Sent: Friday, June 23, 2006 6:21 PM To: George, Benjamin Cc: serusers(a)iptel.org Subject: RE: [Serusers] Facing problems while downloading SEMS Hi George You can go here http://ftp.iptel.org/pub/sems/ <http://ftp.iptel.org/pub/sems/> you will find every thing you need Aimable _____ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Benjamin.George(a)t-systems.com Sent: Friday, June 23, 2006 2:37 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Facing problems while downloading SEMS Hi, I am planning to integrate SEMS (media server) with SER to develop some conferencing and IVR applications on top of that. While I was trying to checkout SEMS code from SVN repository using SVN: or HTTP: it is not getting downloaded. It was throwing some connection failure error. The commands which I tried are: svn checkout svn://svn.berlios.de/sems/trunk, and svn checkout http://svn.berlios.de/svnroot/repos/sems/trunk So it will be great if somebody can provide me some pointer on: 1. How can I checkout SEMS source successfully? 2. Is there any SEMS source tarball readily available to download? 3. Is there any SEMS ready to install binary on debian platform is available? 4. Whether SEMS support Voice XML (VXML)? Regards, Benjamin.

1 0

[Users] AVPops Arrays?
by Kelvin Williams 26 Jun '06

26 Jun '06

I'm contemplating the storage of a lot of values (15 or so) for users using AVPops. My question would be the MySQL server and any potential bottleneck it may create. Is it possible to perform one database hit and extract all of the AVPs into an array which could then be referenced throughout the transaction? Thanks, Kw

1 0

[Serusers] CDRTool +Asterisk + Ser
by hgaillac-sip＠yahoo.fr 24 Jun '06

24 Jun '06

Hello, I try to configure CDRTool + Asterisk . After having fixed a lot of files I get too many problems with this software. First I get this error why ? Error: Table 'asterisk_cdr' was not locked with LOCK TABLES The basic soap client does not connect to the soap server to get the version . harry ___________________________________________________________________________ Yahoo! Mail réinvente le mail ! Découvrez le nouveau Yahoo! Mail et son interface révolutionnaire. http://fr.mail.yahoo.com

2 1

RE: [Users] Modifying from_uri
by Kelvin Williams 24 Jun '06

24 Jun '06

Disregard.. Found it the moment I hit send. UAC. _____ From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Kelvin Williams Sent: Saturday, June 24, 2006 5:41 PM To: users(a)openser.org Subject: [Users] Modifying from_uri We are deploying in a cable environment, and for sake of ease we are registering all SIP UAs by their MAC address. And associating phone numbers with dbaliases. It all works great until we try to send a phone call to the PSTN. I need to know the way to modify the from_uri to change it from the MAC of the device to the actual phone number which we will retrieve using avp or so. Thanks in advance. Kw

1 0

[Users] Modifying from_uri
by Kelvin Williams 24 Jun '06

24 Jun '06

We are deploying in a cable environment, and for sake of ease we are registering all SIP UAs by their MAC address. And associating phone numbers with dbaliases. It all works great until we try to send a phone call to the PSTN. I need to know the way to modify the from_uri to change it from the MAC of the device to the actual phone number which we will retrieve using avp or so. Thanks in advance. Kw

1 0

[Users] errors in xlog-output
by Thomas Balsfulland 24 Jun '06

24 Jun '06

hello together, i am using openser v1.0.1 as a simple proxy. for logging i use xlog like xlog("L_ERR","[$Tf]: PSTN -> SIP: new Call [$fU] to [$tU]\n"); with the setting modparam("xlog", "buf_size", 16384). but in the logfile i see many error-messages: 5(29423) ERROR: warning_builder: buffer size exceeded 5(29423) WARNING: warning skipped -- too big is this a problem of xlog? anyone knows how can i fix this? thank you for help. regards thomas -- thomas balsfulland tbals(a)ctrl-c.de zwischen mut und dummheit liegt nur ein grat der sich durch das vorbereitetsein unterscheidet

2 1

Re: FW: [Users] Out of Memory
by Bogdan-Andrei Iancu 24 Jun '06

24 Jun '06

Douglas, indeed, it looks like there is a a memory leak in using the DNS resolver. It is used by ENUM module and by the SIP resolver. So, are you using ENUM module for lookups? Do you have some module of your own using the DNS resolver? I took a look into the SIP resolver and I found some possible cases leading to memory leak, but there were some error handling corner cases......only if you have some very bogus DNS results...anyhow try to update from CVS and see if the leak is still present. regards, bogdan Douglas Garstang wrote: >Bogdan, > >I guess I didn't realise the dumping was done on a per process basis. >I've sent you a complete daemon.log file this time. You will see that many of the processes are reporting out of memory. >I sent a USR1 signal to pid's 21131, 21127 and 21126 (which where all reporting out of memory). > >Douglas. > >-----Original Message----- >From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >Sent: Thursday, June 22, 2006 12:10 PM >To: Douglas Garstang >Cc: Users(a)openser.org >Subject: Re: [Users] Out of Memory > > >Hi Douglas, > >I when over the dumps you get, but there is no increasing memory >consumption in time (some number of used mem chunks). Also the first >line shows: > Memory status (pkg): > qm_status (0x8121ba0): > heap size= 1048576 > used= 21908, used+overhead=248632, free=799944 > >so only 25% is used from the 1M available. > >Please check that you are actually sending the SIGUSR1 signal to the >process that generated the memory error (it's about the per-process >memory and not the shared one). So, wait for the error to occur, send >the signal to the reporting process and please send me the log (no need >to post again on web). > >regards, >bogdan > > >Douglas Garstang wrote: > > > >>Bogdan, >> >>I finally managed to upload the memory dumps to pastebin. Links are: >>Hopefully you can access them. >> >>Memory dump right after OpenSER was started: http://pastebin.com/723872 >>Memory dump after OpenSER running for 20min: http://pastebin.com/723890 >>Memory dump after OpenSER running for 50min: http://pastebin.com/723902 >> >>The problem started to occur between the 20 and 50 minute samples. About 20 calls had been processed in that time. >> >>Douglas. >> >> >> >> >> >>>-----Original Message----- >>>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>>Sent: Wednesday, June 21, 2006 10:14 AM >>>To: Douglas Garstang >>>Cc: Users(a)openser.org >>>Subject: Re: [Users] Out of Memory >>> >>> >>>As written in the wiki, if you do not know how to interpret >>>the result, >>>you should post them on a ftp or http server and send the link to the >>>list - also, important is to mention in which context did you get the >>>mem dump - is the shutdown dump, a run time dump... >>> >>>regards, >>>bogdan >>> >>> >>>Douglas Garstang wrote: >>> >>> >>> >>> >>> >>>>Once I get the memory status, how do I interpret the results? >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>>>-----Original Message----- >>>>>From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] >>>>>Sent: Wednesday, June 21, 2006 9:43 AM >>>>>To: Douglas Garstang >>>>>Cc: Users(a)openser.org >>>>>Subject: Re: [Users] Out of Memory >>>>> >>>>> >>>>>Hi Douglas, >>>>> >>>>>it was signal SIGUSR1 and not SIGHUP - I strongly advice you >>>>>to go through >>>>> http://openser.org/dokuwiki/doku.php?id=memory >>>>>note you have to recompile and reinstall in order to be able to do >>>>>memory debug. >>>>> >>>>>also does not matter how much mem. your system has - openser >>>>>will use by >>>>>default only 1M per process. Refer to the wiki for how to >>>>> >>>>> >>>>> >>>>> >>>increase it. >>> >>> >>> >>> >>>>>Regards, >>>>>Bogdan >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >> >> >> >> > > >

1 0

[Serusers] radius dictionary.ser missing attributes?
by John Clements 23 Jun '06

23 Jun '06

I configured radius accounting and added the contents of /etc/ser/dictionary.ser to /etc/radiusclient/dictionary and get the following errors when starting radiusd: rlm_acct_unique: Cannot find attribute 'Client-IP-Address' in dictionary So I took the one out of: /usr/src/ser/ser-0.9.7-pre1/modules/acc/etc/sip_dictionary and appended it to the original dicitionary and received the same error. Does anyone know what I may be doing wrong? -John

2 2

[Users] I receive "513 Message too big" for the Invite
by Reddy, Muralidhar 23 Jun '06

23 Jun '06

Hello, Everything works fine if I run Proxy without TLS disabled. I tried both TCP/UDP, it works fine. For TLS, Registration went fine however Proxy responds "513 Message too big" . I don't see any wrong headers in the message. The length is almost same for TCP and TLS invite message, the only change is sip and sips. Any C file I need to modify? Openser.conf # # $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=9 # debug level (cmd line: -dddddddddd) #fork=yes #log_stderror=no # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=yes # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. lineset sip register_timeout: -R) port=5061 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support disable_tls = 0 listen = tls:158.218.105.138:5061 tls_verify = on tls_require_certificate = on tls_method = TLSv1 tls_certificate = "/home/mreddy/tools/cert.pem" tls_private_key = "/home/mreddy/tools/priv.pem" tls_ca_list = "/home/mreddy/tools/root_cert_fluffyCA.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/openser/modules/auth.so" #loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- #modparam("usrloc", "db_mode", 2) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) #modparam("usrloc|auth_db", "db_url", "dbtext:///tmp/openserdb") # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; #if 1 if (msg:len >= 4096 ) { sl_send_reply("513", "Message too big"); exit; }; #endif # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay_to_tls("IP_domain1","port_domain1"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay_to_tls("IP_domain2","port_domain2"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } Thanks, Murali Reddy Texas Instruments

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users