sr-users

sr-users@lists.kamailio.org

10 participants
37461 discussions

RE: [Users] Out of Memory
by Douglas Garstang 26 Jun '06

26 Jun '06

Bogdan, Don't appear to have ever received that message. To answer your questions: We are not using ENUM at all. We aren't using our own module for DNS lookups. I will try the latest cvs. Doug > -----Original Message----- > From: Bogdan-Andrei Iancu [mailto:bogdan@voice-system.ro] > Sent: Monday, June 26, 2006 8:33 AM > To: Douglas Garstang > Cc: Users(a)openser.org > Subject: Re: [Users] Out of Memory > > > See the list. I sent you a reply : > http://www.openser.org/pipermail/users/2006-June/005321.html > > regards, > bogdan > > Douglas Garstang wrote: > > >>-----Original Message----- > >>From: Douglas Garstang > >>Sent: Thursday, June 22, 2006 12:09 PM > >>To: Bogdan-Andrei Iancu > >>Cc: Users(a)openser.org > >>Subject: RE: [Users] Out of Memory > >> > >> > >> > >> > >>>-----Original Message----- > >>>From: Douglas Garstang > >>>Sent: Wednesday, June 21, 2006 12:48 PM > >>>To: Bogdan-Andrei Iancu > >>>Cc: Users(a)openser.org > >>>Subject: RE: [Users] Out of Memory > >>> > >>> > >>>Bogdan, > >>> > >>>I finally managed to upload the memory dumps to pastebin. > Links are: > >>>Hopefully you can access them. > >>> > >>>Memory dump right after OpenSER was started: > >>>http://pastebin.com/723872 > >>>Memory dump after OpenSER running for 20min: > >>>http://pastebin.com/723890 > >>>Memory dump after OpenSER running for 50min: > >>>http://pastebin.com/723902 > >>> > >>>The problem started to occur between the 20 and 50 minute > >>>samples. About 20 calls had been processed in that time. > >>> > >>> > >>So... I'm wondering if anything has been determined with this... > >> > >> > > > >Hi Bogdan. Did you manage to find anything with this? > > > >Douglas. > > > > > >

2 1

RE: [Users] Out of Memory
by Douglas Garstang 26 Jun '06

26 Jun '06

> -----Original Message----- > From: Douglas Garstang > Sent: Thursday, June 22, 2006 12:09 PM > To: Bogdan-Andrei Iancu > Cc: Users(a)openser.org > Subject: RE: [Users] Out of Memory > > > > -----Original Message----- > > From: Douglas Garstang > > Sent: Wednesday, June 21, 2006 12:48 PM > > To: Bogdan-Andrei Iancu > > Cc: Users(a)openser.org > > Subject: RE: [Users] Out of Memory > > > > > > Bogdan, > > > > I finally managed to upload the memory dumps to pastebin. Links are: > > Hopefully you can access them. > > > > Memory dump right after OpenSER was started: > > http://pastebin.com/723872 > > Memory dump after OpenSER running for 20min: > > http://pastebin.com/723890 > > Memory dump after OpenSER running for 50min: > > http://pastebin.com/723902 > > > > The problem started to occur between the 20 and 50 minute > > samples. About 20 calls had been processed in that time. > > So... I'm wondering if anything has been determined with this... Hi Bogdan. Did you manage to find anything with this? Douglas.

2 1

[Serusers] SER + B2BUA
by roger leszczynski 26 Jun '06

26 Jun '06

Anyone here use ser + b2bua for billing reasons? if so can you provide the config files? ..... i want to be able to capture cdrs even if i restart ser.

6 6

RE: [Serusers] Facing problems while downloading SEMS
by Aimable Habiyakare 26 Jun '06

26 Jun '06

George, As per this link http://www.iptel.org/drupal/sems Please use only following SERi source tarball:ser-0.9.6-sems_src.tar.gz <http://ftp.iptel.org/pub/sems/ser-0.9.6-sems_src.tar.gz> The link I gave has also some sample config files. For the VoiceXML support, I don't know but I think it does not - yet. Thanks Aimable ________________________________ From: Benjamin.George(a)t-systems.com [mailto:Benjamin.George@t-systems.com] Sent: Monday, June 26, 2006 7:45 AM To: Aimable Habiyakare Cc: serusers(a)iptel.org Subject: RE: [Serusers] Facing problems while downloading SEMS Hi Aimable, Thanks a lot buddy! I got whatever I wanted from that link. Now let me compile it properly and test it with my application. By the way I would like to ask you two more things: 1. SER 0.9.6 is already running on my m/c and my question is, before installing SEMS, any other modules have to be incorporated in to the SER? 2. Whether SER support Voice XML (VXML)? Regards, Benjamin. ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Aimable Habiyakare Sent: Friday, June 23, 2006 6:21 PM To: George, Benjamin Cc: serusers(a)iptel.org Subject: RE: [Serusers] Facing problems while downloading SEMS Hi George You can go here http://ftp.iptel.org/pub/sems/ you will find every thing you need Aimable ________________________________ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Benjamin.George(a)t-systems.com Sent: Friday, June 23, 2006 2:37 PM To: serusers(a)lists.iptel.org Subject: [Serusers] Facing problems while downloading SEMS Hi, I am planning to integrate SEMS (media server) with SER to develop some conferencing and IVR applications on top of that. While I was trying to checkout SEMS code from SVN repository using SVN: or HTTP: it is not getting downloaded. It was throwing some connection failure error. The commands which I tried are: svn checkout svn://svn.berlios.de/sems/trunk, and svn checkout http://svn.berlios.de/svnroot/repos/sems/trunk So it will be great if somebody can provide me some pointer on: 1. How can I checkout SEMS source successfully? 2. Is there any SEMS source tarball readily available to download? 3. Is there any SEMS ready to install binary on debian platform is available? 4. Whether SEMS support Voice XML (VXML)? Regards, Benjamin.

1 0

[Users] difference between return, break and exit.
by D'Addelfio Davide 26 Jun '06

26 Jun '06

Hi to all, i need to understand the difference in usage between return, break and exit. Could someone help me, maybe with some example? Thanks Davide

1 0

RE: [Serusers] ERROR: bad config file (1 errors)
by mukesh 26 Jun '06

26 Jun '06

hi ram, thanks. I've got the Mysql problem solved. new one arises !! [root@oracle2 sbin]# ./ser 0(7598) WARNING: fix_socket_list: could not rev. resolve 202.80.40.141 0(7598) WARNING: fix_socket_list: could not rev. resolve 202.80.40.141 Listening on udp: 202.80.40.141 [202.80.40.141]:5060 udp: 127.0.0.1 [127.0.0.1]:5060 tcp: 202.80.40.141 [202.80.40.141]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 Aliases: tcp: localhost:5060 tcp: localhost.localdomain:5060 tcp: oracle:5060 tcp: oracle2.hungama.com:5060 udp: localhost:5060 udp: localhost.localdomain:5060 udp: oracle:5060 udp: oracle2.hungama.com:5060 *: 202.80.40.141:* *: ims.hungama.com:* stateless - initializing [root@oracle2 sbin]# 0(0) Maxfwd module- initializing textops - initializing 0(0) INFO: udp_init: SO_RCVBUF is initially 110592 0(0) INFO: udp_init: SO_RCVBUF is finally 262142 0(0) ERROR: udp_init: bind(4, 0x810bffc, 16) on 202.80.40.141: Address already in use #this is error below is few lines from my ser.cfg, may help u to find the error # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=yes # (cmd line: -E) listen=202.80.40.141 listen=127.0.0.1 # hostname matching an alias will satisfy the condition uri==myself". alias=ims.mysip.com alias=202.80.40.141 /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" # ------------------ module loading ---------------------------------- #Uncomment tdfsdfis if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) any clu ?? regards Mukesh _____ From: ram [mailto:talk2ram@gmail.com] Sent: Monday, June 26, 2006 11:19 AM To: mukesh Subject: Re: [Serusers] ERROR: bad config file (1 errors) Hi Mukesh better get in to onsip.org download ser-0.97-pre edit make file in the exclude remove mysql and save make all make install should solve ur problem ram On 6/23/06, mukesh <mukesh(a)hungama.com> wrote: hi olivier, in fact I have downloaded ser-0.9.6_linux_i386.tar.tar from iptel.org <http://iptel.org/> . then I have put the ser-0.9.6_linux_i386.tar.tar file in root(/) directory and executed following command [root@oracle2 /]# tar -xvzf ser-0.9.6_linux_i386.tar.tar do still need to recompile it ? .....I think complation had to be done in case I had the source code. regards Mukesh _____ From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Friday, June 23, 2006 3:16 PM To: mukesh Cc: olivier.taylor(a)phonext.com <mailto:olivier.taylor@phonext.com> ; serusers(a)lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors) it seems that you didn't compile ser with mysql support. go to the makefile et have a look at exclude_modules?= delete the mysql entry and recompile Olivier mukesh a écrit : hi olivier, below is the log -----------------------------------log starts here-------------------------------------------- Jun 23 14:51:48 oracle2 ser: ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open shared object file: No such file or directory Jun 23 14:51:48 oracle2 ser: parse error (37,13-14): failed to load module -----------------------------------log ends here-------------------------------------------- and line no. 37 is loadmodule "/usr/local/lib/ser/modules/mysql.so" please suggest some solution. regards Mukesh _____ From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Friday, June 23, 2006 12:45 PM To: mukesh Cc: olivier.taylor(a)phonext.com; serusers(a)lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors) yes, sure :) /var/log/messages you will find the informations you need concerning that error, at least, the line of your cfg where the error occurs. Olivier mukesh a écrit : Thanks you olivier. Can you be little more specific, where this message file is located ? Regards Mukesh -----Original Message----- From: olivier.taylor [mailto:olivier.taylor@gmail.com] Sent: Thursday, June 22, 2006 9:55 PM To: mukesh Cc: serusers(a)lists.iptel.org Subject: Re: [Serusers] ERROR: bad config file (1 errors) see the message file, you will find there the line wich is not correct on your ser.cfg Olivier mukesh a écrit : Hi I am getting "ERROR: bad config file (1 errors)" while truing to execute the SER. And I could not figure out whats wrong with this line loadmodule "/usr/local/lib/ser/modules/mysql.so" If I comment it then everything is file. Following is my ser.cfg file ---------------------------------ser.cfg star------------------------------ # # $Id: ser.cfg,v 1.25.2.1 <http://1.25.2.1/> 2005/02/18 14:30:44 andrei Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) listen=192.87.41.149 <http://192.87.41.149/> #this address has been changed # hostname matching an alias will satisfy the condition uri==myself". alias=sip.myserver.com <http://sip.myserver.com/> /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ #check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) port=5060 children=4 fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" #added by mukesh # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_url", "mysql://ser:heslo@localhost/ser") #added by mukesh modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy #modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); break; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); break; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); break; }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); route(1); break; }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("sip.myserver.com <http://sip.myserver.com/> ", "subscriber")) { www_challenge("ser.hungama.com <http://ser.hungama.com/> ", "0"); break; }; save("location"); break; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); break; }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); break; }; }; append_hf("P-hint: usrloc applied\r\n"); route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; } ---------------------------------ser.cfg ends------------------------------ Any help/suggestion is highly appreciated. Regards Mukesh _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _____ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

1 0

[Serusers] first posting, got a few problems..
by nick 26 Jun '06

26 Jun '06

To explain my situation, I've got a dual opteron 246 system with 1gig of ram and 2 80gig disks in raid1 (software raid), I'm running CentOS 4.3 x86_64 with kernel 2.6.9-34.ELsmp I'm running ser 0.9.6-6 (the -6 may just be an artifact from the fedora core rpm.. I dunno) (compiled from ser-0.9.6_src.tar.gz) Since no one seems to makes rpms for redhat or centOS (the same thing obviously) I went and made my own. I grabbed a fedora core 6 src rpm, and modified the specfile to my own liking (basically I took out the stuff related to postgres), the compile went fine, as far as I can tell, no errors were big enough to stop the compilation at least, and the rpms installed just fine. All the modules are in the right place, and my ser.cfg seems to be correct (I don't get any more errors during startup), however, I do get a segfault :( here's the attached output from /log/messages Jun 23 12:20:18 sipserver ser: Listening on Jun 23 12:20:18 sipserver ser: udp: 192.168.1.93 [192.168.1.93]:5060 Jun 23 12:20:18 sipserver ser: tcp: 192.168.1.93 [192.168.1.93]:5060 Jun 23 12:20:18 sipserver ser: Aliases: Jun 23 12:20:18 sipserver ser: tcp: pc-00093:5060 Jun 23 12:20:18 sipserver ser: udp: pc-00093:5060 Jun 23 12:20:18 sipserver ser: Jun 23 12:20:18 sipserver kernel: ser[3682]: segfault at 0000000000000000 rip 0000002a9589ef92 rsp 0000007fbffff850 error 4 Jun 23 12:20:18 sipserver ser: ser startup succeeded Obviously ser isn't running, does anyone have any idea where I can start looking to find out what dies/died/went wrong with the compile? Thanks, Nick

4 9

[Serusers] Checking Active Calls
by Ryan Pagquil 26 Jun '06

26 Jun '06

Hi, I'm implementing SER in a prepaid environment. Now we are getting active calls from the radacct tables of RADIUS since we are using RADIUS auth and acct. We are just assuming that those entries without an acctstoptime and sessiontime are active calls. Is there a way for me monitor if the call (entry in the radacct table) is really active? Or is there any tool that I can use to monitor active RTP sessions from gateway to UA? Thanks, Ryan

2 1

[Users] "513 Message too big" for the Invite
by Reddy, Muralidhar 26 Jun '06

26 Jun '06

Hello, Everything works fine if I run Proxy without TLS disabled. I tried both TCP/UDP, it works fine. For TLS, Registration went fine however Proxy responds "513 Message too big" to the Invite. I don't see any wrong headers in the message. The length is almost same for TCP and TLS invite message, the only change is sip and sips. Any 'C' file or config file I need to modify? Openser.conf: debug=9 # debug level (cmd line: -dddddddddd) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=yes dns=no rev_dns=no port=5061 children=4 fifo="/tmp/openser_fifo" disable_tls = 0 listen = tls:158.218.105.138:5061 tls_verify = on tls_require_certificate = on tls_method = TLSv1 tls_certificate = "/home/mreddy/tools/cert.pem" tls_private_key = "/home/mreddy/tools/priv.pem" tls_ca_list = "/home/mreddy/tools/root_cert_fluffyCA.pem" #loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; #if 1 if (msg:len >= 4096 ) { sl_send_reply("513", "Message too big"); exit; }; #endif # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { if (!t_relay()) { sl_reply_error(); }; exit; } Thanks, Murali Reddy Texas Instruments Murali Reddy Texas Instruments Germantown,MD Phone: 301-515-3716 e-mail: mreddy(a)ti.com <mailto:mreddy@ti.com>

2 1

[Serusers] How do I get rid of npdi=yes?
by John Clements 26 Jun '06

26 Jun '06

I've looked around and have found one or two other posts asking about this, but I have never seen an answer. The From is: =uri: <sip:5551212;npdi=yes@x.x.x.x:5060;dtg=SIP;user=phone> Which causes a number of issues. USRLOC no longer works: =lookup(): '5551212;npdi=yes' Not found in usrloc And when you send the call to an Asterisk server, Asterisk wigs out because it truncates everything after the first ";" it encounters in the URI. Does anyone have any idea how to get rid of it? I've tried subst(), but could not get it to work. :-( -John

7 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users