sr-users

sr-users@lists.kamailio.org

22 participants
37573 discussions

[Users] provisional response management ( 100 Trying )
by T.R. Missner 21 Jul '06

21 Jul '06

Hello, I want to send an immediate 100 trying message when an Invite is received, then I do a DB lookup, then I rewrite the RURI and forward the message using t_relay. Since I have already sent a 100 trying manually I'd like to short circuit the 100 t_relay sends so multiple 100 trying messages aren't sent. Does anyone know of a way to do this? Thanks, T.R.

6 10

Re: [Serusers] Multiple PSTN Gateways
by Jon Farmer 21 Jul '06

21 Jul '06

Ezequiel Colombo wrote: > Hi Jon, you can use DNS SRV records pointing to your gateways and use > something like t_relay_to("pool.yourgateways.com"). Hi Thanks for that. I have only ever seen t_relay_to() examples using IP addresses so was not sure if they also supported DNS. However what is the advantage to using DNS SRV as opposed to normal DNS round robin i.e. A records with the same priority? Regards Jon -- Jon Farmer Telford, Shropshire, UK

1 0

[Users] Please help for TLS testing..
by Ferianto siregar 21 Jul '06

21 Jul '06

Dear all, First of all I would like to say thanks to all of you who has given me some helps and suggestions to solve my problem in configuring my openser system. Thank you very much. I have some questions in configuring the TLS now, I do hope anybody can help me. These are the questions: 1. Now, I try to configure the openser system for using the TLS. So, as Klaus Darilion said before, I must configure openser.cfg file first. So, I uncomment (enable) the TLS by deleting "#" in openser.cfg file. After that, I try to restart the openser again. But, when I run it again (after restarting), I get 3 error messages. Here are the error message: [root@localhost openser]# openser restart 0(5783) parse error (27,12-13): parse error 0(5783) parse error (27,12-13): unknown config variable 0(5783) parse error (27,14-15): ERROR: bad config file (3 errors) 0(5783) destroy_tls: Entered 0(5783) shm_mem_destroy [root@localhost openser]# As I see, the error is at line 27. I see that it contain "tls_verify=1" and "tls_require_certificate=0". I don`t know what is wrong with this line because As I see from all mailinglist`s messages, they didn`t change this line and if they change it, they just change the value, for example : tls_verify = on tls_require_certificate = on I have tried this effort, but I get the same error message. Does anybody can give me a suggestion what sould i do? Please... 2. If the error can be solved, how can I test my TLS configuration? I mean how I can test whether it can run correctly ( It can secure the communication system in openser)? Please help me..I do hope anyone can help me to solve this problem. Thank you. Regards with cheers, Ferianto --------------------------------- Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.

2 1

[Users] using of openser
by unplug 21 Jul '06

21 Jul '06

Hi, I would like to know the typical design to use openser in order to increase the performance. Since openser is a proxy server and it can be used together with another sip server to provide more function such as asterisk. As I have tested using sipp in a normal PC, only openser can handle about 60 concurrent calls. I have no idea where is the bottleneck. I have searched that someone will use openser with asterisk to provide a complete (nearly) solution in voip system. I want to have more information about that combination, such as the design, performance after integration, etc. Does anyone can give me some idea if you are using such combination? unplug

2 1

Re: [Users] SMS using USB Modem
by Klaus Darilion 21 Jul '06

21 Jul '06

On Thu, July 20, 2006 21:50, JThompson(a)westell.com said: > > Hi > I am trying to use the SMS module with a Motorola V600 phone attached via > USB. Linux sees the phone as ttyACM0. In the config file i set the > device > as "d=/dev/ttyACM0". When the module loads it says "NOTICE:initmodem: > Waiting 2 sec. before retrying" then it says the modem is not connected > to > the network. Is it possible to use a USB modem with the SMS module? What > do I need to do? Thank you. > ~Jacob > You can try if it works with the nowsms gateway under Windows. If this doesn't work too, maybe there is a problem with the phone. You can also try minicom and test if you can set up the typical modem commands (AT..., ) regards klaus > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users >

1 0

Re: [Serusers] Presence issue with SER
by Andrey Kouprianov 21 Jul '06

21 Jul '06

Hi, As far as i know, there are mostly commercial SIP presence servers available, but not open source. One open source presence (old one) is written in java JAIN-SIP api called JAIN-PRESENCE-SERVER or smth. I dont know what your objective is, but you can try a client-to-client (mesh, peer-to-peer) presence instead of server presence. If you are making a client on your own, then you'll have a hard time, if you dont need to make a client, just use new version of X-Lite for Win. It has a presence built it for both peer-to-peer and server-side. Alternatevly, you can use Jabber presence instead of SIP presence. There are plenty of resources available for Jabber already as opposed to SIP. Moreover, SER has a jabber module to function as a gateway when subscribtions and notifications arrive from SIP clients (I dont know if it works fine, because I havent tried it yet myself). So, you can have registrations and calls handled by SIP and presence and IM handled by Jabber. Bests, Andrey. On 7/21/06, Jason Terry <jterry(a)airvana.com> wrote: > Hi Andrey, > > I'm having a rough time installing this version of SER. Do you know of another good free presence server? > > Thanks, > Jason > > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Andrey Kouprianov > Sent: Thursday, July 20, 2006 11:04 AM > To: serusers(a)iptel.org > Subject: Re: [Serusers] Presence issue with SER > > Hi, > > SER 0.9.6 is not a presence server and pa.so is an incomplete module. > You can try installing test persence version of CVS or FTP under > /pub/ser/presence directory. > > Andrey. > > On 7/20/06, Jason Terry <jterry(a)airvana.com> wrote: > > > > > > > > Hi, > > > > > > > > I am testing a sip application and I'm using SER as a presence server. > > I see two issues in notifies generated by SER. Here is the actual notify > > that I receive after my app sends a subscribe: > > > > > > > > > > > > NOTIFY sip:Google@10.4.12.10:50600 SIP/2.0 > > > > Via: SIP/2.0/UDP 10.4.12.11;branch=z9hG4bK6c01.a4670966.0 > > > > To: <sip:Google@127.0.0.1>;tag=2cb6000467458b6bc623 > > > > From: > > sip:test@10.4.12.11;tag=5e359e0a74af9df0dcf075250e57d0d9-d5fe > > > > CSeq: 1 NOTIFY > > > > Call-ID: 2cb6000567458b6bc623 > > > > Content-Length: 240 > > > > User-Agent: Sip EXpress router(0.9.6 (i386/linux)) > > > > Event: presence ß The ID from the subscribe is missing > > > > Content-Type: application/pidf+xml > > > > Subscription-State: active;expires=597 > > > > > > > > <?xml version="1.0"?> > > > > <!DOCTYPE presence PUBLIC "//IETF//DTD RFCxxxx PIDF 1.0//EN" > > "pidf.dtd"> > > > > <presence entity="sip:test@10.4.12.11"> > > > > <tuple id="9r28r49">ser"> ß XML Error > > > > <status> > > > > <basic>closed</basic> > > > > </status> > > > > </tuple> > > > > </presence> > > > > > > > > Are these known issues? If so can someone point me to where I can get a > > fix? > > > > > > > > Regards, > > > > Jason > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers >

2 1

[Users] Please help for TLS testing..
by Ferianto siregar 21 Jul '06

21 Jul '06

Dear all, First of all I would like to say thanks to all of you who has given me some helps and suggestions to solve my problem in configuring my openser system. Thank you very much. I have some questions in configuring the TLS now, I do hope anybody can help me. These are the questions: 1. Now, I try to configure the openser system for using the TLS. So, as Klaus Darilion said before, I must configure openser.cfg file first. So, I uncomment (enable) the TLS by deleting "#" in openser.cfg file. After that, I try to restart the openser again. But, when I run it again (after restarting), I get 3 error messages. Here are the error message: [root@localhost openser]# openser restart 0(5783) parse error (27,12-13): parse error 0(5783) parse error (27,12-13): unknown config variable 0(5783) parse error (27,14-15): ERROR: bad config file (3 errors) 0(5783) destroy_tls: Entered 0(5783) shm_mem_destroy [root@localhost openser]# As I see, the error is at line 27. I see that it contain "tls_verify=1" and "tls_require_certificate=0". I don`t know what is wrong with this line because As I see from all mailinglist`s messages, they didn`t change this line and if they change it, they just change the value, for example : tls_verify = on tls_require_certificate = on I have tried this effort, but I get the same error message. Does anybody can give me a suggestion what sould i do? Please... 2. If the error can be solved, how can I test my TLS configuration? I mean how I can test whether it can run correctly ( It can secure the communication system in openser)? Please help me..I do hope anyone can help me to solve this problem. Thank you. Regards with cheers, Ferianto --------------------------------- Do you Yahoo!? Next-gen email? Have it all with the all-new Yahoo! Mail Beta.

1 0

RE: [Serusers] Number registe red
by Teran Jesus 20 Jul '06

20 Jul '06

Yes my problem is that i am using a older version version (0.8.12), how can i use this module in an older version? -----Original Message----- From: Michal Matyska [mailto:michal@iptel.org] Sent: Jueves, 20 de Julio de 2006 02:29 p.m. To: serusers(a)lists.iptel.org Subject: Re: [Serusers] Number registe red If you use the FROM header like in the example you will get the originator of the call... the called uri is in the request uri and/or TO header. Michal On Thu, Jul 20, 2006 at 01:58:07PM -0500, Teran Jesus wrote: > > But the uri have the username or telephone number of the person who i am > calling, not the username of the ip phone registered, and i want the number > of the person who generate the call. > > > -----Original Message----- > From: Michal Matyska [mailto:michal@iptel.org] > Sent: Jueves, 20 de Julio de 2006 12:03 p.m. > To: serusers(a)lists.iptel.org > Subject: [SPAM header] - Re: [SPAM header] - [Serusers] Number > registered - Email found insubject - Email found in subject > > > Well, with the CVS head version, you can use eval module to do that.... > > eval_push("x:%@from.uri.user"); # get from uri username and put to stack > eval_push("1"); #starting point > eval_push{"2"); #length > eval_oper("substr"); > > then you can use the result as @eval.get[0] e.g. > > if (@eval.get[0]=="55") {...} > > Michal > > On Thu, Jul 20, 2006 at 11:46:20AM -0500, Teran Jesus wrote: > > Does anybody have an answer to my questions, i really apreciate any help. > > > > -----Original Message----- > > From: Teran Jesus [mailto:jteran@mcmtelecom.com.mx] > > Sent: Miércoles, 19 de Julio de 2006 11:33 a.m. > > To: serusers(a)lists.iptel.org > > Subject: [SPAM header] - [Serusers] Number registered - Email found in > > subject > > > > > > Hello > > I want to validate and get the 2 first digits of the telephone number > > registered, if i have a ip phone registered with a number like this > > 5556000000, when i recieve a INVITE from this number, i want to get 55 and > > validate the number, are there something to do this? > > > > Can you help me? > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

2 1

[Serusers] Multiple PSTN Gateways
by Jon Farmer 20 Jul '06

20 Jul '06

Hi I am wondering how to get SER to use multiple PSTN gateways for load balancing purposes. Does anyone have any ideas? Regards Jon -- Jon Farmer Telford, Shropshire, UK

1 0

[Users] SMS using USB Modem
by JThompson＠westell.com 20 Jul '06

20 Jul '06

Hi I am trying to use the SMS module with a Motorola V600 phone attached via USB. Linux sees the phone as ttyACM0. In the config file i set the device as "d=/dev/ttyACM0". When the module loads it says "NOTICE:initmodem: Waiting 2 sec. before retrying" then it says the modem is not connected to the network. Is it possible to use a USB modem with the SMS module? What do I need to do? Thank you. ~Jacob

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users