sr-users

sr-users@lists.kamailio.org

21 participants
37573 discussions

[Serusers] Forward PSTN calls
by luke.2.pilgrim＠bt.com 24 Jul '06

24 Jul '06

Hi all, I'm trying to get some information on setting SER up to forward all PSTN calls to my Asterisk box. I am pretty new to this so I don't have a clue as to where to start. Any help would be greatly appreciated. Cheers, Luke.

1 0

FW: [Serusers] flush issue with (DBText) flatfile
by Vinod Kumar Singh 24 Jul '06

24 Jul '06

All, We are still not able to write the records in flat file BUT one good thing happened, we are able to retrieve the records from in memory. Have anybody done this part of SER? Regards, Vinod _____ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Ramachandran Gunasekaran Sent: Wednesday, July 19, 2006 3:24 PM To: serusers(a)lists.iptel.org Subject: [Serusers] flush issue with (DBText) flatfile Dear All, I am using dbtext flatfile as location database, SER is not able to write the contact details into the flat file until and unless I kill the SER process. I tried with db_mode as 1 & 2. Does anybody face this issue ? please let me know the solution. Ramachandran G

1 0

[Users] 477 or 503 in sl_reply_error()
by Taisto Qvist 24 Jul '06

24 Jul '06

Hi folks, I am wondering under what circumstances that openser will generate its default "477" error response. I'm still a newbie on the OpenSER software so I hope I am not just missing some configuration issues. It seems like its(the 477 responsecode) is for instance used when transaction layer didnt manage to send the request, and I am a bit puzzled why the 477 responsecode is used. According to the rfc, I believe "408 Timeout" would be more correct on generic transaction timeouts, and on fatal transport errors, like tcp-reset, I believe 503 is the accurate responsecode. Or? Regards Taisto Qvist IP Solutions

4 3

[Users] Accounting packets on Free radius server
by ravi reddy 24 Jul '06

24 Jul '06

Hi users, I have been trying to use Freeradius using along with openser ,and with openser sampleconfig files , atlast I managed to recieve packets from openser. here the problem was , iam getting accounting packets duplicate . that is when X called Y ----> in radacct table iam getting the following information "I am giving only some coloumns" ___________________________________________________________________________________ radacctid | callingstationid | calledstationid | acctstarttime | acctstoptime | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- 10 | Y@ipaddress | X@ipaddress | 2006-07-24 10:23:06 | 2006-07-24 10:23:41| 11 | Y@ipaddress | X@ipaddress | 2006-07-24 10:23:06 | 2006-07-24 10:23:41| This records are When "Y" called "X"....... Here Y called X and then Y stops the conversation and the accounting details are like above with "duplicate entries" and below are accounting records when "Y" called "X" and " X " stops the conversation first..... radacctid | callingstationid | calledstationid | acctstarttime | acctstoptime | ---------------------------------------------------------------------------------------------------------------------------------------------------------------------- 12 | Y@ipaddress | X@ipaddress | 2006-07-24 10:23:06 | 0000-00-00 00:00:00| 13 | Y@ipaddress | X@ipaddress | 2006-07-24 10:23:06 | 0000-00-00 00:00:00| 14 | X@ipaddress | Y@ipaddress | 2006-07-24 10:23:58 | 2006-07-24 10:23:58 | So, here iam getting two duplicate entries with only account start time and one with acct stoptime but with calling stationid is going to called stationid O.K eventhough Acctsessionid is same and is the key value: and i setflag(1) [accounting flag] just before the looseroute section route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("81.21.34.37:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- setflag(1) ; if (loose_route()) { <------------------------------------ {this is the place where i setflag after checking so many places } if (has_totag() && (method=="INVITE" || method=="ACK")) { setflag(11);setflag(12); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; So please any body solve my problem so that i can get billing records properly if not please specify a place to setting the accounting flag so that i dont get this "duplicate entries" I hope you guys will help me, Thank You. regards, Ravi.

2 2

Re: [Serusers] error configuration file
by Andrey Kouprianov 24 Jul '06

24 Jul '06

The sample conf file for PSTN gateway can be found with getting started document on onsip.org ftp site. Plz, check. On 7/24/06, Asep Saifudin <aseps2000(a)gmail.com> wrote: > > Hi Andrey, > I have install SER 0.9.6.x in my FreeBSD 6.0 and my configuration until now > still failed (core dumped and my Xten won't register to SER even I have > account in subscriber table. > Do you have (or anybody have) sample running configuratin of ser.cfg for SER > 0.9.6.x which I can try/use on my SER server ? my scheme is simple, my SER > can call inter SER-account and call to PSTN/Mobile via my quintum gateway. > Hopefully you have sample running ser.cfg file > > ~Asep > > 2006/7/24, Andrey Kouprianov <andrey.kouprianov(a)gmail.com>: > > > Thing is, 0.8.14 doesnt have uri_db.so module (only uri.so), which was > introduced in version 0.9.x. That's why it would not work. > > On 7/24/06, Giuseppe Parlato <gparlato(a)tnet.it> wrote: > > If I unload uri.so and but I load uri_db.so I get the following error: > > bind_dbmod: Module sql does not export db_use_table function > > ERROR: mod_init(): Can't bind database module > > init_mod(): Error while initializing module usrloc > > WARNING:fm_free: free(0) called > > > > However I dont get error no more on this line: > > modparam("auth_db|domain|group|uri|usrloc", "db_url", > > "sql://serro:psw@xxx.xxx.xxx.xxx/ser") > > > > ??? > > > > > > Giuseppe > > > > ----- Original Message ----- > > From: "Giuseppe Parlato" < gparlato(a)tnet.it> > > To: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com> > > Cc: <serusers(a)iptel.org > > > Sent: Sunday, July 23, 2006 8:11 PM > > Subject: Re: [Serusers] error configuration file > > > > > > > Before (0.8.14) in conf file uri_db.so was not loaded but everything > > > worked the same. > > > In my conf file I had: > modparam("auth_db|domain|group|uri|usrloc", > > > "db_url", "sql://serro:psw@xxx.xxx.xxx.xxx/ser"), but if I upgrade to > > > 0.9.6 I get an error on this line. > > > > > > > > > ..I'm using freeradius > > > > > > thanks > > > Giuseppe > > > > > > ----- Original Message ----- > > > From: "Andrey Kouprianov" < andrey.kouprianov(a)gmail.com> > > > To: <serusers(a)iptel.org> > > > Sent: Saturday, July 22, 2006 12:02 PM > > > Subject: Re: [Serusers] error configuration file > > > > > > > > >>I think it's the check_from() that gives the error. Check if you've > > >> loaded uri_db.so module... > > >> > > >> On 7/21/06, Klaus Darilion < klaus.mailinglists(a)pernau.at> wrote: > > >>> maybe && instead of & ????? > > >>> > > >>> this error message also happens if you forget to close all if blocks > > >>> (watch out for missing '}' ) > > >>> > > >>> regards > > >>> klaus > > >>> > > >>> Giuseppe Parlato wrote: > > >>> > Hi.. I got the following error when I try to start ser: > > >>> > > > >>> > parse error (329,55-56): unknown command, missing loadmodule? > > >>> > ERROR: bad config file (1 errors) > > >>> > ser startup failed > > >>> > > > >>> > so on my configuration file the problem is this here: > > >>> > } else if ((method=="INVITE") & !check_from()) { > > >>> > > > >>> > I was using ser 0.8.14 then upgraded to 0.9.6, but configuration > file > > >>> > has not been changed. The same file worked on 0.8.14 version. > > >>> > > > >>> > > > >>> > help please > > >>> > Giuseppe > > >>> > _______________________________________________ > > >>> > Serusers mailing list > > >>> > Serusers(a)lists.iptel.org > > >>> > http://lists.iptel.org/mailman/listinfo/serusers > > >>> > > >>> _______________________________________________ > > >>> Serusers mailing list > > >>> Serusers(a)lists.iptel.org > > >>> http://lists.iptel.org/mailman/listinfo/serusers > > >>> > > >> _______________________________________________ > > >> Serusers mailing list > > >> Serusers(a)lists.iptel.org > > >> http://lists.iptel.org/mailman/listinfo/serusers > > >> > > >> > > >> -- > > >> No virus found in this incoming message. > > >> Checked by AVG Free Edition. > > >> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: > > >> 21/07/2006 > > >> > > >> > > > > > > _______________________________________________ > > > Serusers mailing list > > > Serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > -- > > > No virus found in this incoming message. > > > Checked by AVG Free Edition. > > > Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: > 21/07/2006 > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > > >

1 0

[Serusers] Japan DID Provider
by Kapil Dhawan 24 Jul '06

24 Jul '06

Hi Any DID Provider in Japan. _________________________________________________________________ Sexy, sultry, sensuous. - see why Bipasha Basu is all that and more. Try MSN Search http://server1.msn.co.in/Profile/bipashabasu.asp

1 0

[Serusers] error configuration file
by Giuseppe Parlato 24 Jul '06

24 Jul '06

Hi.. I got the following error when I try to start ser: parse error (329,55-56): unknown command, missing loadmodule? ERROR: bad config file (1 errors) ser startup failed so on my configuration file the problem is this here: } else if ((method=="INVITE") & !check_from()) { I was using ser 0.8.14 then upgraded to 0.9.6, but configuration file has not been changed. The same file worked on 0.8.14 version. help please Giuseppe

3 7

RE: [SPAM header] - [Serusers] Number registered - Email found in subject
by Teran Jesus 22 Jul '06

22 Jul '06

Does anybody have an answer to my questions, i really apreciate any help. -----Original Message----- From: Teran Jesus [mailto:jteran@mcmtelecom.com.mx] Sent: Miércoles, 19 de Julio de 2006 11:33 a.m. To: serusers(a)lists.iptel.org Subject: [SPAM header] - [Serusers] Number registered - Email found in subject Hello I want to validate and get the 2 first digits of the telephone number registered, if i have a ip phone registered with a number like this 5556000000, when i recieve a INVITE from this number, i want to get 55 and validate the number, are there something to do this? Can you help me? _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers

4 5

[Users] PAP2 device problem
by Jayesh Nambiar 22 Jul '06

22 Jul '06

Hi all, I dont know if this is the relevant question to ask on this list, but still if someone could help me..... I have my openser working fantastically as I needed. I have forwarding and voicemail features configured in openser. The configuration is like any user can dial *86 followed by the number, and the number will be his forward on busy number, similarly *87 followed by the number and that number will be his forward on no-answer number. What I basically do is strip, the *86 or *87 and store the appropriate values in usr_preferences table. This setup works fine with xten, eyebeam and audiocdes analog gateways. But when I try this with a linksys PAP2T device, it does not work. The reason is, in the PAP2 device, if u press 2 digits after the * it sends that to the proxy. It does not wait for further number to be dialed. Any 2 digits after * is relayed to proxy directly. I've tried disabling all features in the PAP2 device but still failed to get it working for me. Can someone give me an idea of how do I stop my linksys box from doing this. I want that the user be able to dial *86123456 and then it should go to the proxy, so that I can get 123456 as the forwarded number. Can someone please help me on this... Thanks in advance, Jayesh. --------------------------------- Find out what India is talking about on Yahoo! Answers India.

1 0

[Serusers] ser+sems t_write_unix error !
by iptel 22 Jul '06

22 Jul '06

I have: Sems downloaded from: http://www.iptel.org/drupal/sems Ser version: 0.9.6 in ser.cfg: unix_sock="/tmp/ser_sock" sock_mode=0666 fifo_db_url="mysql://ser:user@server/ser" fifo_mode=0666 ........ if(!t_write_unix("/tmp/sems_sock","conference")) .... ... in sems.cfg: socket_name=/tmp/sems_sock reply_socket_name=/tmp/sems_rsp_sock ser_socket_name=/tmp/ser_sock When i call conference, this error appear on screen: t_get_trans_ident: no transaction found assemble_msg: t_get_trans_ident failed ERROR:tm:t_write_unix: Error in assemble_msg ERROR: t_reply: cannot send a t_reply to a message for which no T-state has been established Please, Can anyone help me?!!!!??? My operating system is Linux Fedora core 5 ! Thanks

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users