sr-users

sr-users@lists.kamailio.org

19 participants
37571 discussions

RE: [Users] PAP2 device problem
by Ricardo Martinez 25 Jul '06

25 Jul '06

Hello Jayesh Did you try changing the dial plan ? As far as i remember the factory dial plan includes somethign like : *xx So you need to modify this specific dial plan for *xx[NUMBER] or something like that.. Cheers! Ricardo Martinez.- -----Mensaje original----- De: users-bounces(a)openser.org [mailto:users-bounces@openser.org]En nombre de Jayesh Nambiar Enviado el: sábado, 22 de julio de 2006 7:09 Para: openser Asunto: [Users] PAP2 device problem Hi all, I dont know if this is the relevant question to ask on this list, but still if someone could help me..... I have my openser working fantastically as I needed. I have forwarding and voicemail features configured in openser. The configuration is like any user can dial *86 followed by the number, and the number will be his forward on busy number, similarly *87 followed by the number and that number will be his forward on no-answer number. What I basically do is strip, the *86 or *87 and store the appropriate values in usr_preferences table. This setup works fine with xten, eyebeam and audiocdes analog gateways. But when I try this with a linksys PAP2T device, it does not work. The reason is, in the PAP2 device, if u press 2 digits after the * it sends that to the proxy. It does not wait for further number to be dialed. Any 2 digits after * is relayed to proxy directly. I've tried disabling all features in the PAP2 device but still failed to get it working for me. Can someone give me an idea of how do I stop my linksys box from doing this. I want that the user be able to dial *86123456 and then it should go to the proxy, so that I can get 123456 as the forwarded number. Can someone please help me on this... Thanks in advance, Jayesh. _____ Find out what India is talking about on Yahoo! <http://us.rd.yahoo.com/mail/in/mailanswersshare/*http://in.answers.yahoo.co…> Answers India.

2 1

[Users] DID forward from SER Suggestions
by ram 25 Jul '06

25 Jul '06

Hi I have SER installed and working fine, my DID provider forward the 20 DID to My IP address to my SERVER when i authenticate using that DID iam able to make calls in and out ( using SER) Now i have other Office located in different Place and that is different branch there i have planning install Asterisk for PBX local VoIP and calling out ( using SER ) now i would like to forward 10 DID from SER to Asterisks internet Asterisk will bind the DID to extension or autoattendent. how can i do that ? can some one give me some idea or point to me to documents could be helpfull thanks ram

2 2

[Serusers] ser-0.10.99-dev35-pa-4.1 problem
by Erwin Rabano Pasia 25 Jul '06

25 Jul '06

Hi, I've been trying to configure a development version of SER specifically the ser-0.10.99-dev35-pa-4.1 release wich was claimed to have better support for Presence/XCAP service but always having error on debug run. Anyone have encountered such problem? Thanks. 0(15611) loading module /usr/local/ser-0.10.99/lib/ser/modules/lib_ser_cds.so 0(15611) ERROR: no version info in module </usr/local/ser-0.10.99/lib/ser/modules/lib_ser_cds.so>: /usr/local/ser-0.10.99/sbin/ser: undefined symbol: module_version Regards, Erwin __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

RE: Re: [Serusers] Problem starting SER with MYSQL
by Champike Munasinghe 25 Jul '06

25 Jul '06

Hi Josh, Thanks for the message, unfortunately, I dont have a ser/modules directory under /usr/lib.... all the modules are in /usr/local/lib/ser/modules ...Any other ideas? :) Cheers - CM Date: Mon, 24 Jul 2006 10:49:39 -0400Subject: Re: [Serusers] Problem starting SER with MYSQLFrom: jlaroff(a)gmail.comTo: champike(a)hotmail.com Try changing the path to the modules directory in ser.cfg to /usr/lib/ser/modules/This is where they are located on my fedora box.-JoshOn 7/24/06 10:36 AM, "Champike Munasinghe" <champike(a)hotmail.com> wrote: Hi, I've downloaded and installed SER 0.9.6 on my Fedora Core system running MySQL 4.1.11-0. When I start SER without modifying the /usr/local/etc/ser/ser.cfg file, it starts normally. However, when I make the modifications to use MySQL for the database, following Dan Austin's HOWTO, I get the following error: Jul 24 15:09:45 sipgw ser: ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open shared object file: No such file or directoryJul 24 15:09:45 sipgw ser: parse error (28,13-14): failed to load modulemysql.so does exist in the /usr/local/lib/ser/modules directory, but libmysqlclient.so.12 doesnt. I found libmysqlclient.so.14 in /usr/lib/mysql directory and tried creating a symbolic link called libmysqlclient.so.12 to that file, this didnt work. Also, I tried copying the so.14 file into /usr/local/lib/ser/modules as libmysqlclient.so.12, still got the same error. I tried searching the lists, but couldnt find any info that mentioned anything about this issue. Am I doing something really stupid here? Thanks for your help Cheers!! -CM _______________________________________________Serusers mailing listSerusers@lists.iptel.orghttp://lists.iptel.org/mailman/listinfo/serusers

2 1

Re: [Serusers] error configuration file
by Andrey Kouprianov 25 Jul '06

25 Jul '06

Im not sure what the problem is. However, it's not just the uri.so you have to change to uri_db.so, when migrating from 0.8.x to 0.9.x. There are more things like: 1. vm.so module does not exist in 0.8.x anymore. Been moved to tm.so 2. All the operands such as "&" or "|" must be changed to "&&" and "||" respectively 3. Negation such as in if( ! value1=value2) will now be if (value1 != value2) 4. pa.so module has no effect in 0.9.x, because it will always NOTIFY with status "closed" for anyone who subscribes to SER. 5. There might be more, but I dont remember now. If you've sent your ser.cfg file, maybe someone could help, because sometimes it's difficult to see the error w/o seeing config file. Andrey. On 7/24/06, Asep Saifudin <aseps2000(a)gmail.com> wrote: > > Andrey, > I have try ser.cfg on Onsip.org but not meet with my plan. > Btw, I have running SER 0.8.14 on my Linux machine and then the ser.cfg file > I copy & paste to my new SER 0.9.6 (and I have change uri to uri_db) machine > and then when I type ser -c I got message error in /var/log/messages like > this : > Jul 24 21:17:17 sangbintang kernel: pid 51240 (ser), uid 0: exited on signal > 11 (core dumped). > > And then I type serctl start, I got message like these : > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: Maxfwd module- > initializing > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: db_url=0x82091a0 > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: db_url= > mysql://ser:heslo@localhost/ser > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: db_url.len=31 > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: > pa_domain=sip.handhelds.org > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: pa_mod: use_db=1 > db_url.s=mysql://ser:heslo@localhost/ser pa_domain=sip.hand > helds.org > Jul 24 21:17:46 sangbintang /usr/local/sbin/ser[51248]: pa_mod_init done > Jul 24 21:17:59 sangbintang kernel: Limiting closed port RST response from > 253 to 200 packets/sec > Jul 24 21:18:01 sangbintang kernel: Limiting closed port RST response from > 233 to 200 packets/sec > Jul 24 21:18:02 sangbintang kernel: Limiting closed port RST response from > 262 to 200 packets/sec > Jul 24 21:18:04 sangbintang kernel: Limiting closed port RST response from > 283 to 200 packets/sec > Jul 24 21:18:24 sangbintang kernel: Limiting closed port RST response from > 253 to 200 packets/sec > Jul 24 21:18:25 sangbintang kernel: Limiting closed port RST response from > 233 to 200 packets/sec > Jul 24 21:18:27 sangbintang kernel: Limiting closed port RST response from > 262 to 200 packets/sec > Jul 24 21:18:28 sangbintang kernel: Limiting closed port RST response from > 283 to 200 packets/sec > Jul 24 21:19:04 sangbintang /usr/local/sbin/ser[51250]: TESTING TO SEE IF IT > IS FROM LOCAL NAT. > Jul 24 21:19:04 sangbintang /usr/local/sbin/ser[51250]: REPLYING DOMAIN NOT > SERVED HERE. > > What's the meaning of them cos I still got registration problem ? (it's hard > for me as a newbie in SER) :(( > > > 2006/7/24, Andrey Kouprianov <andrey.kouprianov(a)gmail.com>: > > The sample conf file for PSTN gateway can be found with getting > > started document on onsip.org ftp site. Plz, check. > > > > On 7/24/06, Asep Saifudin <aseps2000(a)gmail.com> wrote: > > > > > > Hi Andrey, > > > I have install SER 0.9.6.x in my FreeBSD 6.0 and my configuration until > now > > > still failed (core dumped and my Xten won't register to SER even I have > > > account in subscriber table. > > > Do you have (or anybody have) sample running configuratin of ser.cfg for > SER > > > 0.9.6.x which I can try/use on my SER server ? my scheme is simple, my > SER > > > can call inter SER-account and call to PSTN/Mobile via my quintum > gateway. > > > Hopefully you have sample running ser.cfg file > > > > > > ~Asep > > > > > > 2006/7/24, Andrey Kouprianov <andrey.kouprianov(a)gmail.com>: > > > > > > > Thing is, 0.8.14 doesnt have uri_db.so module (only uri.so), which was > > > introduced in version 0.9.x. That's why it would not work. > > > > > > On 7/24/06, Giuseppe Parlato <gparlato(a)tnet.it> wrote: > > > > If I unload uri.so and but I load uri_db.so I get the following error: > > > > bind_dbmod: Module sql does not export db_use_table function > > > > ERROR: mod_init(): Can't bind database module > > > > init_mod(): Error while initializing module usrloc > > > > WARNING:fm_free: free(0) called > > > > > > > > However I dont get error no more on this line: > > > > modparam("auth_db|domain|group|uri|usrloc", "db_url", > > > > " sql://serro:psw@xxx.xxx.xxx.xxx/ser") > > > > > > > > ??? > > > > > > > > > > > > Giuseppe > > > > > > > > ----- Original Message ----- > > > > From: "Giuseppe Parlato" < gparlato(a)tnet.it> > > > > To: "Andrey Kouprianov" <andrey.kouprianov(a)gmail.com> > > > > Cc: < serusers(a)iptel.org > > > > > Sent: Sunday, July 23, 2006 8:11 PM > > > > Subject: Re: [Serusers] error configuration file > > > > > > > > > > > > > Before (0.8.14) in conf file uri_db.so was not loaded but everything > > > > > worked the same. > > > > > In my conf file I had: > > > modparam("auth_db|domain|group|uri|usrloc", > > > > > "db_url", "sql://serro:psw@xxx.xxx.xxx.xxx/ser"), but if I upgrade > to > > > > > 0.9.6 I get an error on this line. > > > > > > > > > > > > > > > ..I'm using freeradius > > > > > > > > > > thanks > > > > > Giuseppe > > > > > > > > > > ----- Original Message ----- > > > > > From: "Andrey Kouprianov" < andrey.kouprianov(a)gmail.com> > > > > > To: < serusers(a)iptel.org> > > > > > Sent: Saturday, July 22, 2006 12:02 PM > > > > > Subject: Re: [Serusers] error configuration file > > > > > > > > > > > > > > >>I think it's the check_from() that gives the error. Check if you've > > > > >> loaded uri_db.so module... > > > > >> > > > > >> On 7/21/06, Klaus Darilion < klaus.mailinglists(a)pernau.at> wrote: > > > > >>> maybe && instead of & ????? > > > > >>> > > > > >>> this error message also happens if you forget to close all if > blocks > > > > >>> (watch out for missing '}' ) > > > > >>> > > > > >>> regards > > > > >>> klaus > > > > >>> > > > > >>> Giuseppe Parlato wrote: > > > > >>> > Hi.. I got the following error when I try to start ser: > > > > >>> > > > > > >>> > parse error (329,55-56): unknown command, missing loadmodule? > > > > >>> > ERROR: bad config file (1 errors) > > > > >>> > ser startup failed > > > > >>> > > > > > >>> > so on my configuration file the problem is this here: > > > > >>> > } else if ((method=="INVITE") & !check_from()) { > > > > >>> > > > > > >>> > I was using ser 0.8.14 then upgraded to 0.9.6, but configuration > > > file > > > > >>> > has not been changed. The same file worked on 0.8.14 version. > > > > >>> > > > > > >>> > > > > > >>> > help please > > > > >>> > Giuseppe > > > > >>> > _______________________________________________ > > > > >>> > Serusers mailing list > > > > >>> > Serusers(a)lists.iptel.org > > > > >>> > > http://lists.iptel.org/mailman/listinfo/serusers > > > > >>> > > > > >>> _______________________________________________ > > > > >>> Serusers mailing list > > > > >>> Serusers(a)lists.iptel.org > > > > >>> http://lists.iptel.org/mailman/listinfo/serusers > > > > >>> > > > > >> _______________________________________________ > > > > >> Serusers mailing list > > > > >> Serusers(a)lists.iptel.org > > > > >> http://lists.iptel.org/mailman/listinfo/serusers > > > > >> > > > > >> > > > > >> -- > > > > >> No virus found in this incoming message. > > > > >> Checked by AVG Free Edition. > > > > >> Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: > > > > >> 21/07/2006 > > > > >> > > > > >> > > > > > > > > > > _______________________________________________ > > > > > Serusers mailing list > > > > > Serusers(a)lists.iptel.org > > > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > > > > > -- > > > > > No virus found in this incoming message. > > > > > Checked by AVG Free Edition. > > > > > Version: 7.1.394 / Virus Database: 268.10.3/395 - Release Date: > > > 21/07/2006 > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > > > > Serusers mailing list > > > Serusers(a)lists.iptel.org > > > http://lists.iptel.org/mailman/listinfo/serusers > > > > > > > > > > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > > > >

1 0

[Serusers] registering ser
by dillip parida 25 Jul '06

25 Jul '06

hi actually i m new to SER. i want to know that Is it possible in SER that withought registering can we make a call. dilip

2 3

[Serusers] SER or OpenSER
by Chahn John Kim 25 Jul '06

25 Jul '06

I am a SER starter. I have seen many subjects related to Openser. Can someone shed a light on what are the differences between these? And even some insights to suggest which may be better than the other? We are planing to start business service shortly and we appreciate any inputs on which SIP server infrastructure provides better performance and scalability. Thank you in advance. John K.

4 5

RE: [Serusers] SER/MediaProxy Audio issues - NEED HELP
by Marc Rys 24 Jul '06

24 Jul '06

I just tried all of that.. Still no luck. I even made sure the UA’s were using ports 10000 and higher. Any other suggestions? marc _____ From: Ali Zaidi [mailto:aligzaidi@gmail.com] Sent: Monday, July 24, 2006 4:56 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Ok, try restarting ser + MySQL + MediaProxy then reregister your both ATA. let me know, Ali On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@ivalve.net"m.rys(a)ivalve.net> wrote: Ali, Thank you for helping. I've changed my mediaproxy.ini file to the following. But the one way audio is still happening. Marc ----------------------------------------------------------- Mediaproxy.ini ----------------------------------------------------------- [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = HYPERLINK "http://12.178.142.235"12.178.142.235 # This is where OpenSER installed portRange = 10000:10100 TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc ________________________________________ From: Ali Zaidi [mailto:HYPERLINK "mailto:aligzaidi@gmail.com"aligzaidi(a)gmail.com] Sent: Monday, July 24, 2006 4:40 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Mediaproxy.ini has not RTP ports declare. ;portRange = 2000:8000 # These values are set same in ATA's configs <- 2000:8000 range conflict with 5060. Try following, portRange = 10000:10100 then restart mediaproxy. Let me know if you still have problem, i can help further. Ali... On 7/24/06, Marc Rys <HYPERLINK "mailto:m.rys@rystec.com" m.rys(a)rystec.com> wrote: Hello All, I'm fairly new to SER / Mediaproxy.I've been following the examples from HYPERLINK "http://onsip.org"onsip.org using the latest Getting started docs. At this point I'm testing with two Grandstream Handytone 486 UA' s.One NAT'd, one not. Please check out the following URL to see a diagram explaining my setup. HYPERLINK "http://marc.ivalve.net/ser/gif_1.gif"http://marc.ivalve.net/ser/gif_1.gif "UA-2" cannot hear anything spoken from "UA-1", although I can hear what is said from "UA-2" on "UA-1", but not vice versa.2-way voice is not happening. Both UA's do register to SER.The NAT'd UA couldn't register until I got Mediaproxy installed.Mediaproxy does appear to start with out errors. Below are my Ser.cfg and Mediaproxy.ini. Please Help. Marc Ser.cfg -------------------------------------------------------------- #5a-mysql-mediaproxy-ser.cfg debug=3 fork=yes log_stderror=no listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { #----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------------ mediaproxy.ini ------------------------------------------------------------ [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = XXX.XXX.XXX.235# This is where OpenSER installed ;portRange = 2000:8000# These values are set same in ATA's configs for RTP Range TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list HYPERLINK "mailto:Serusers@lists.iptel.org"Serusers(a)lists.iptel.org HYPERLINK "http://lists.iptel.org/mailman/listinfo/serusers"http://lists.iptel.org/mai lman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

1 0

[Serusers] no 200 OK and ACK after some INVITEs
by Rosario Pingaro 24 Jul '06

24 Jul '06

I am experiencing this weir issue. On some calls I don't get 200 OK and ACK and so the is dropped because INVITE expres. this is the log about 3 calls, the first ans second are without 200 OK ans ACK the tird one is with them and it is estabilished in a good way. A is the voip customers B is ser proxy C is the PSTN gateway 7331.881781 A -> B SIP/SDP Request: INVITE sip:0828963359@voip.prova.it, with session description 7331.883158 B -> A SIP Status: 407 Proxy Authentication Required 7331.987931 A -> B SIP Request: ACK sip:0828963359@voip.prova.it 7331.988081 A -> B SIP/SDP Request: INVITE sip:0828963359@voip.prova.it, with session description 7332.018157 B -> A SIP Status: 100 trying -- your call is important to us 7332.018602 B -> C SIP/SDP Request: INVITE sip:0828963359@C:5060, with session description 7332.114175 C -> B SIP Status: 100 Trying 7332.176249 C -> B SIP Status: 183 Session Progress 7332.177555 B -> A SIP Status: 183 Session Progress 7333.637122 C -> B SIP/SDP Status: 183 Session Progress, with session description 7333.638364 B -> A SIP/SDP Status: 183 Session Progress, with session description 7377.818129 B -> A SIP Status: 408 Request Timeout 7377.825608 B -> C SIP Request: CANCEL sip:0828963359@C:5060 7377.857091 A -> B SIP Request: ACK sip:0828963359@voip.prova.it 7377.897414 C -> B SIP Status: 200 OK 7377.898809 C -> B SIP Status: 487 Request Terminated 7377.899679 B -> C SIP Request: ACK sip:0828963359@C:5060 7394.152872 A -> B SIP/SDP Request: INVITE sip:0828963359@voip.prova.it, with session description 7394.154283 B -> A SIP Status: 407 Proxy Authentication Required 7394.263174 A -> B SIP Request: ACK sip:0828963359@voip.prova.it 7394.314345 A -> B SIP/SDP Request: INVITE sip:0828963359@voip.prova.it, with session description 7394.344910 B -> A SIP Status: 100 trying -- your call is important to us 7394.345321 B -> C SIP/SDP Request: INVITE sip:0828963359@C:5060, with session description 7394.439264 C -> B SIP Status: 100 Trying 7394.506851 C -> B SIP Status: 183 Session Progress 7394.508176 B -> A SIP Status: 183 Session Progress 7395.305016 C -> B SIP/SDP Status: 183 Session Progress, with session description 7395.306549 B -> A SIP/SDP Status: 183 Session Progress, with session description 7439.955201 B -> A SIP Status: 408 Request Timeout 7439.962438 B -> C SIP Request: CANCEL sip:0828963359@C:5060 7439.997963 A -> B SIP Request: ACK sip:0828963359@voip.prova.it 7440.042139 C -> B SIP Status: 200 OK 7440.046886 C -> B SIP Status: 487 Request Terminated 7440.047528 B -> C SIP Request: ACK sip:0828963359@C:5060 7460.312529 A -> B SIP/SDP Request: INVITE sip:0828963359@voip.prova.it, with session description 7460.314196 B -> A SIP Status: 407 Proxy Authentication Required 7460.343504 A -> B SIP Request: ACK sip:0828963359@voip.prova.it 7460.417725 A -> B SIP/SDP Request: INVITE sip:0828963359@voip.prova.it, with session description 7460.447096 B -> A SIP Status: 100 trying -- your call is important to us 7460.447528 B -> C SIP/SDP Request: INVITE sip:0828963359@C:5060, with session description 7460.545094 C -> B SIP Status: 100 Trying 7460.613676 C -> B SIP Status: 183 Session Progress 7460.614909 B -> A SIP Status: 183 Session Progress 7461.520262 C -> B SIP/SDP Status: 183 Session Progress, with session description 7461.521608 B -> A SIP/SDP Status: 183 Session Progress, with session description 7463.544538 C -> B SIP/SDP Status: 200 OK, with session description 7463.546046 B -> A SIP/SDP Status: 200 OK, with session description 7463.586935 A -> B SIP Request: ACK sip:0828963359@C:5060 7463.595536 B -> C SIP Request: ACK sip:0828963359@C:5060 7511.516164 A -> B SIP Request: BYE sip:0828963359@C:5060 7511.532938 B -> C SIP Request: BYE sip:0828963359@C:5060 7511.606909 C -> B SIP Status: 200 OK 7511.607877 B -> A SIP Status: 200 OK Should this behavior be triggered by some misconfiguration in my ser.cfg or it is only about the PSTN gateway not sending 200 OK? Many Thnaks Rosario Rosario Pingaro D. Lgs 196/2003 Il presente messaggio contiene informazioni confidenziali, indirizzate esclusivamente alle persone sopra indicate. Se il ricevente non è tra dette persone, non dovrà intraprendere alcuna azione, tipo copia, stampa o trasmettere il suo contenuto a terzi ed i relativi allegati, ma solo informare il mittente dell'errore e cancellare il messaggio. Il mittente dovrà, altresì, accertarsi che gli allegati non contengano virus prima di aprirli.

1 0

FW: [Serusers] SER/MediaProxy Audio issues - NEED HELP
by Marc Rys 24 Jul '06

24 Jul '06

Ali, Thank you for helping. Ive changed my mediaproxy.ini file to the following. But the one way audio is still happening. Marc ----------------------------------------------------------- Mediaproxy.ini ----------------------------------------------------------- [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = 12.178.142.235 # This is where OpenSER installed portRange = 10000:10100 TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc ________________________________________ From: Ali Zaidi [mailto:aligzaidi@gmail.com] Sent: Monday, July 24, 2006 4:40 PM To: Marc Rys Subject: Re: [Serusers] SER/MediaProxy Audio issues - NEED HELP Marc, Mediaproxy.ini has not RTP ports declare. ;portRange = 2000:8000 # These values are set same in ATA's configs <- 2000:8000 range conflict with 5060. Try following, portRange = 10000:10100 then restart mediaproxy. Let me know if you still have problem, i can help further. Ali... On 7/24/06, Marc Rys <m.rys(a)rystec.com> wrote: Hello All, I'm fairly new to SER / Mediaproxy. I've been following the examples from onsip.org using the latest Getting started docs. At this point I'm testing with two Grandstream Handytone 486 UA's. One NAT'd, one not. Please check out the following URL to see a diagram explaining my setup. http://marc.ivalve.net/ser/gif_1.gif "UA-2" cannot hear anything spoken from "UA-1", although I can hear what is said from "UA-2" on "UA-1", but not vice versa. 2-way voice is not happening. Both UA's do register to SER. The NAT'd UA couldn't register until I got Mediaproxy installed. Mediaproxy does appear to start with out errors. Below are my Ser.cfg and Mediaproxy.ini. Please Help. Marc Ser.cfg -------------------------------------------------------------- #5a-mysql-mediaproxy-ser.cfg debug=3 fork=yes log_stderror=no listen=XXX.XXX.XXX.235 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/lib/ser/modules/mysql.so" loadmodule "/usr/lib/ser/modules/sl.so" loadmodule "/usr/lib/ser/modules/tm.so" loadmodule "/usr/lib/ser/modules/rr.so" loadmodule "/usr/lib/ser/modules/maxfwd.so" loadmodule "/usr/lib/ser/modules/usrloc.so" loadmodule "/usr/lib/ser/modules/registrar.so" loadmodule "/usr/lib/ser/modules/auth.so" loadmodule "/usr/lib/ser/modules/auth_db.so" loadmodule "/usr/lib/ser/modules/uri.so" loadmodule "/usr/lib/ser/modules/uri_db.so" loadmodule "/usr/lib/ser/modules/domain.so" loadmodule "/usr/lib/ser/modules/mediaproxy.so" loadmodule "/usr/lib/ser/modules/nathelper.so" loadmodule "/usr/lib/ser/modules/textops.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ------------------------------------------------------------------------ # Sanity Check Section # ------------------------------------------------------------------------ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ------------------------------------------------------------------------ # Record Route Section # ------------------------------------------------------------------------ if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("XXX.XXX.XXX.235:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ------------------------------------------------------------------------ # Loose Route Section # ------------------------------------------------------------------------ if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(3); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ------------------------------------------------------------------------ # Default Message Handler # ------------------------------------------------------------------------ t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ------------------------------------------------------------------------ # REGISTER Message Handler # ------------------------------------------------------------------------ sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { #----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ------------------------------------------------------------ mediaproxy.ini ------------------------------------------------------------ [Dispatcher] ;start = yes socket = /var/run/proxydispatcher.sock ;group = ser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = ser listen = None allow = None proxyIP = XXX.XXX.XXX.235 # This is where OpenSER installed ;portRange = 2000:8000 # These values are set same in ATA's configs for RTP Range TOS = 0xb8 idleTimeout = 60 holdTimeout = 180 forceClose = 0 accounting = off [Accounting] user = root password = host = localhost database = ser table = acc -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers -- No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006 -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.394 / Virus Database: 268.10.4/396 - Release Date: 7/24/2006

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users