sr-users

sr-users@lists.kamailio.org

54 participants
37560 discussions

Re: [Serusers] mysql change tcp port
by Andrey Kouprianov 07 Aug '06

07 Aug '06

Wow! Thanx!!! On 8/7/06, sip <sip(a)arcdiv.com> wrote: > Usually, that's done in the /etc/my.cnf file. Is it not working there? > > My my.cnf file has a client ([client]) and server ([mysqld]) section. > > My server section (the non-commented part) looks like: > > [mysqld] > port = 3306 > socket = /var/lib/mysql/mysql.sock > > The client section looks the same (since I like the defaults to work the same > when connecting via the command-line client): > > [client] > [mysqld] > port = 3306 > socket = /var/lib/mysql/mysql.sock > > > There were a few packages I had that didn't come with an /etc/my.cnf file but > still read from one if it was there. > > N. > > On Mon, 7 Aug 2006 19:47:54 +0700, Andrey Kouprianov wrote > > Hi, > > > > I know it's the wrong list and I dont even expect anyone to answer. > > Anyway... Does anyone know how to specify different listening TCP > > port and socket name when installing mysql server from FreeBSD ports? > > > > Andrey. > > _______________________________________________ > > Serusers mailing list > > Serusers(a)lists.iptel.org > > http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

[Serusers] mysql change tcp port
by Andrey Kouprianov 07 Aug '06

07 Aug '06

Hi, I know it's the wrong list and I dont even expect anyone to answer. Anyway... Does anyone know how to specify different listening TCP port and socket name when installing mysql server from FreeBSD ports? Andrey.

1 0

[Users] routes configurations
by Lens Oreste 07 Aug '06

07 Aug '06

Hi all I am new to openser and would like to configure my routes. I would like to have some samples. Please point me on the right direction. Regards Lens Oreste

2 1

[Users] rfc support
by abhishek kaushik 07 Aug '06

07 Aug '06

hi all , can anybody tell me if OpenSER supports rfc 4028? thnks abhishek

2 1

[Serusers] Simple Request/Response Forwarding
by Sebastian Gabris 07 Aug '06

07 Aug '06

Hello everybody, i'm new to SER and try to write my first config file. Since my english is not that good and i dont have much time, i want to minimize my reading of SER tutorials. This is my VoIP - test enviroment: UA(private/local IP) <-> (private/local IP)SER(public IP) <-> (public IP) VoIP - Provider I want SER to simply relay/forward all incoming and outgoing calls. I dont want that SER should have a SIP -domain, no authentication or registration. RTP - Streams should also be forwarded over the Proxy. No my questions: What is the simplest way to implement this? As far as i know i need the rtpproxy module. Do i need the nathelper or any other important modules? I also figured out to use the mhomed option. Has someone a sample config file for such a scenario? Any Documentation in German for the config file? Thanks in advance and any Help & Tipps would be very appreciated. _____________________________________________________________________ Der WEB.DE SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! http://smartsurfer.web.de/?mc=100071&distributionid=000000000071

1 0

[Users] OpenSER v1.1.0 notls in Debian unstable official repository
by Daniel-Constantin Mierla 07 Aug '06

07 Aug '06

Hello, thanks to the work of Julien BLACHE and pkg-voip-maintainers group from Debian, OpenSER v1.1.0 is available via official Debian APT repositories with the unstable distribution. http://packages.debian.org/unstable/net/openser People liking to use default repositories can remove the openser.org site from sources.list. Beware that the version included in Debian does not include the TLS support -- integration of GPL and OpenSSL license to satisfy Debian policies being in progress. If you want to use the TLS version, stay with openser.org's repository for a while. Cheers, Daniel

1 0

[Users] Rewriting Contact HF port
by Justin Pearce 07 Aug '06

07 Aug '06

I am wondering if there is a good way to rewrite the port in the contact header in OpenSER 1.0.1 before it is stored in the location table?(I'm using the MySQL database backend). Thus far, I am using "subst(/^(Contact.+):[0-9]+(.+)$/\1:5060\2/ig);" just before I do "save("location");", but that does not seem to be working. Suggestions? Justin Pearce Information Technology/Programming Price Video Productions JustinP(a)PriceVideo.com 361-572-3810 800-733-3810 Fax: 361-572-3894 www.PriceVideo.com

2 1

FW: [Serusers] using SER for SIP conversion from H323
by Richard C. Thompson 06 Aug '06

06 Aug '06

I know this may sound like heresy but a Quintum call relay does a great job doing this. We use a number of them with our SER and asterisk servers. Rick _____ From: serusers-bounces(a)lists.iptel.org [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Torres, Javier Sent: Wednesday, August 02, 2006 12:19 PM To: serusers(a)lists.iptel.org Subject: [Serusers] using SER for SIP conversion from H323 Hello, I was wondering if anyone was using this in conjunction with Cisco Call manager to get out to a voip network. Call manager is horrible at SIP so I was hoping to have a h323 connection from Call manager to SER, the SER box would take that connection and forward it with SIP out to a voip peering fabric we are testing out. I know asterisk can be used in this fashion but had some voice quality issues and figured this piece of software might be better suited. Just hoping someone has done this and can confirm and maybe point me in the right direction for a how-to? Thanks, Javier

2 1

Re: [Serusers] registered UA's
by Jiri Kuthan 06 Aug '06

06 Aug '06

Well, I think there is nothing else better than troubleshooting and looking at what it is message by message. I agree NAT issues may be worth looking at. Other problem we experience frequently is that we drive registration period low, indicate that using Expires header-field, and client is silly not to honor it. -jiri At 17:14 03/08/2006, Weiter Leiter wrote: >My number one suspect would be the nat. >WL. > >On 8/3/06, Richard C. Thompson <<mailto:rthompson@vir2com.com>rthompson(a)vir2com.com> wrote: > >Hi All > > > >I hope someone can help me figure this out. We've had a ser server running for quite some time now on a Dell 2850 with dual cpu's. The load is very low due to the use of multiple mediaproxy servers to handle the RTP streams. We have about 2300 UID in the mysql database but at any given time only about 1300 show as registered in the location table and we have customers complaining about not receiving calls. When tech support has a customer power cycle their ATA, it registers just fine and they start receiving calls. What could cause this? From the beginning, I noticed this was happening but didn't give it much thought as the number of UIDs was low. But now it is a growing problem. SER version is 0.9.0 > > > >Any hints or help would be appreciated. > > > >Rick > > > > > > > >_______________________________________________ >Serusers mailing list ><mailto:Serusers@lists.iptel.org>Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers > > > >_______________________________________________ >Serusers mailing list >Serusers(a)lists.iptel.org >http://lists.iptel.org/mailman/listinfo/serusers -- Jiri Kuthan http://iptel.org/~jiri/

1 0

[Serusers] SIP MESSAGE method
by sip 05 Aug '06

05 Aug '06

At some point in the not too distant past, I used to bounce SIP MESSAGEs back and forth from UA to UA on our server. Now, it no longer seems to work (get an error 513 -- message too big error... which is kind of a default for all unhandled SIP methods), and I'm not entirely sure how to go about fixing it. Can someone explain how a MESSAGE should be handled and maybe give me a hint as to why it used to work but does no longer (I know that's pretty vague, but just some ideas of what I might look at to point me in the right direction would be good)? Meanwhile I'll fiddle, but I don't seem to be getting anywhere. N.

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users