sr-users

sr-users@lists.kamailio.org

37 participants
37510 discussions

Re: [Serusers] ACC 900/976 Dialing Advice
by Tracy Lofton 07 Sep '06

07 Sep '06

Hi all, I recently added a function to openser.cfg as shown below: if (uri=~"^sip:919(00|76)[0-9]{7}@") { acc_db_request("403 - 900/976 Disabled", "acc"); xlog("L_INFO", "Cancel attempt to call 9xx number (not 911), db recorded\n"); exit; }; but when a user calls the 900/976 prefix, it records in the database and the caller is restricted access, however, the caller waits too long before finally hearing a busy signal. Is there a way to speed up a return on the busy signal (some type of timer) or even possibly transfer the call to Asterisk IVR to hear a recording like, call cannot be completed or something, or some type of faster 486 busy (failure_route or record_route?). Need advice and how should i implement. Thanks, Tracy _________________________________________________________________ Got something to buy, sell or swap? Try Windows Live Expo ttp://clk.atdmt.com/MSN/go/msnnkwex0010000001msn/direct/01/?href=http://exp…

1 0

Re: [Serusers] ACC 900/976 Dialing Advice
by Tracy Lofton 07 Sep '06

07 Sep '06

Hi all, I recently added a function to openser.cfg as shown below: if (uri=~"^sip:919(00|76)[0-9]{7}@") { acc_db_request("403 - 900/976 Disabled", "acc"); xlog("L_INFO", "Cancel attempt to call 9xx number (not 911), db recorded\n"); exit; }; but when a user calls the 900/976 prefix, it records in the database and the caller is restricted access, however, the caller waits too long before finally hearing a busy signal. Is there a way to speed up a return on the busy signal (some type of timer) or even possibly transfer the call to Asterisk IVR to hear a recording like, call cannot be completed or something, or some type of faster 486 busy. Need advice and how should i implement. Thanks, Tracy _________________________________________________________________ Windows Live Spaces is here! Its easy to create your own personal Web site. http://spaces.live.com/signup.aspx

1 0

Re: [Serusers] SER & Asterisk (IVR problem)
by Roberto Lopes 07 Sep '06

07 Sep '06

Hi, Well I don't think I could skip the authorization process because there are analogical devices which need to be authenticated, so it would create problems. How do I add the Asterisk Server to the trust tables? I'm actually thinking of adding Asterisk as a RADIUS client to the RADIUS server (freeRadius) What do you think? Thanks in advance, Roberto So... if I understand this correctly, you're having problems with diverted calls FROM the Asterisk IVR not being able to authenticate on SER? Could you just add the Asterisk server to the trust tables and skip the auth process for calls coming back or would that create problems? N. * On Tue, 5 Sep 2006 21:16:45 +0100, Roberto Lopes wrote* > Hi to all! > I've a big problem with SER & Asterisk > I've a network where i put them working together. > Asterisk is the media gateway with PSTN as well as being the server which is making all the services available (IVR, voicemail, conference calls, etc). > SER just routes calls either to the softphones, VoIP phones or to Asterisk who will just forward the calls to PSTN (via Asterisk). > Till now everything works well except the service IVR which is working on Asterisk. > > Details: > *MailScanner has detected a possible fraud attempt from "192.168.226.13" claiming to be* *MailScanner warning: numerical links are often malicious: 192.168.226.13 - IP SER > **MailScanner has detected a possible fraud attempt from "192.168.226.45" claiming to be* *MailScanner warning: numerical links are often malicious: 192.168.226.45 - IP Asterisk * *** > > The problem is only after the user (roberto(a)192.168.226.13 - authenticated and authorized in RADIUS) calls IVR. > Till then the user calls, IVR gives some information to the user and everything goes well. > Problem is when he presses a number which will have to redirect the call to another user. > And why is there a problem. * *> Because the initially roberto(a)192.168.226.13 to be able to call IVR had to rewrite host & port **MailScanner has detected a possible fraud attempt from "192.168.226.45" claiming to be* *MailScanner warning: numerical links are often malicious: 192.168.226.45 so that the call would reach Asterisk who would then call to the IVR. * *** > That rewriting turned roberto(a)192.168.226.13 into roberto(a)192.168.226.45. That is, I can say, that it became a "new user". > While it's on the IVR there's no problem, but when call is diverted it has to give its credentials... * *> Credentials that don't exist in RADIUS cause it only accepts usernames that end in @ **MailScanner has detected a possible fraud attempt from " 192.168.226.13" claiming to be* *MailScanner warning: numerical links are often malicious: 192.168.226.13 (IP of SER) * *** > > Here is the following code, both of extensions file in Asterisk and configure file of SER > I hope somebody knows how to solve it or at least find a way how to. > > extensions.conf - Asterisk > [sip] exten => 74001,1,Answer exten => 74001,2,SetMusicOnHold(default) exten => 74001,3,Set(TIMEOUT(digit)=5) exten => 74001,4,Set(TIMEOUT(response)=10) exten => 74001,5,Background(menu) > exten => 1,1,Dial(SIP/roberto@192.168.226.13:5060,,r) ... exten => 7,1,Goto(sip,74001,1) exten => 8,1,Hangup > > ser.cfg - SER > > ... > if ((uri=~"^sip:7[0-9]{4}@.*")) { > route(5); > break; > }; ... > route[5] { # Redirecting to Asterisk > # MsgLog > xlog("L_ALERT","(WARNING) Sending to Asterisk request of %fu to %tu\n"); * ***> rewritehostport("**MailScanner has detected a possible fraud attempt from " 192.168.226.45:5060" claiming to be* *MailScanner warning: numerical links are often malicious: 192.168.226.45:5060"); * * > route(1); > } > > > Thanks for your help, > Roberto Lopes *

1 0

[Serusers] avp_delete problem
by Luis Silva 07 Sep '06

07 Sep '06

Hi all!! I'm having a big problem when trying to delete an avp. First of all, I do $avp_name= @db.fetch[1].field[1]; an retreive some information from the db. After using it I do avp_delete("$avp_name/g"); . Then I print the avps with the avp_print() an I watch that the value is still there. What might be the problem? thanks a lot Regards, Luís Silva

2 5

Re: [Users] Error in installing Ruby...Please help...Please
by Ferianto siregar 07 Sep '06

07 Sep '06

Dear Sunkara, Thank you very much. Maybe I am too stupid to understand you explanation. I am sorry because I ask you a question anymore? Can I ? Please.... :-) From your explanation, that`s mean I just have to install all packet from FC5 then untar the openseradmin packet and it will work successfully? Do I need Ruby (as mentioned in openseradmin installation note)? Because FC5 has had Ruby packet in it. Thanks you very much for your explanation. Thanks Regards, Ferianto raviprakash sunkara <sunkara.raviprakash.feb14(a)gmail.com> wrote: Hi Ferianto , I Too using the FC5 , install the all packages in FC5 from add or remove programs, And then process the openser addminstroator, Now the Ruby is work, On 9/7/06, Ferianto siregar <ferianto_voip(a)yahoo.com> wrote: Dear Sunkara, Thank you very much. I use FedoraCore 5 raviprakash sunkara < sunkara.raviprakash.feb14(a)gmail.com> wrote: Hello Siregar, I need urs Which OS U r using... On 9/6/06, Ferianto siregar <ferianto_voip(a)yahoo.com > wrote: Dear all, Thank you very much for your help. A few days ago, I have sent a message that to ask about openser admin installation. Thank you very much for your help. Thanks Now, I have tried to install it again. But, When I compile the rubygerms-0.9.0.tar.gz, I got error message. This is the task that I have done before: 1. Untar the rubygerms packet # tar -zxvf rubygems-0.9.0.tar.gz # cd rubygems-0.9.0 # ruby setup.rb # gem install --include-dependencies When I type this command, "gem install --include-dependencies", I got error message. This is the error message: Attempting local installation of 'rails' Local gem file not found: rails*.gem Attempting remote installation of 'rails' Updating Gem source index for: http://gems.rubyforge.org ERROR: While executing gem ... (Gem::RemoteSourceException) Error fetching remote gem cache: getaddrinfo: Temporary failure in name esolution What`s wrong? I do hope anybody can help me to solve this problem. Please help me...Please help because of my lack skills..Please Note: 1. I do not have connection through the internet, so for rails packet, I have downloaded the rails-1.1.6.tar.gz. I have untar it in root directory(same as rubygems) and type command rails # script/server But, Nothing happens. Why? Please... Thank you very much Regards, Ferianto --------------------------------- Do you Yahoo!? Next-gen email? Have it all with the all-new Yahoo! Mail. _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535 --------------------------------- How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call rates. -- Thanks and Regards with cheers Sunkara Ravi Prakash (Voip Developer) Hyperion Technology www.hyperion-tech.com +91-9985077535 --------------------------------- Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

1 0

[Users] Problema with PDT and DBTEXT
by Andrew And 07 Sep '06

07 Sep '06

I am using PDT and I try to use DB type DBTEXT but I have problem, COuld some help me*? Below I wrote debug screen and configuration.* 0(0) PDT: initializing... 0(0) DEBUG: register_fifo_cmd: new command (pdt_add) registered 0(0) DEBUG: register_fifo_cmd: new command (pdt_delete) registered 0(0) DEBUG: register_fifo_cmd: new command (pdt_list) registered 0(0) unixsock_register_cmd: New command (get_domainprefix) registered 0(0) find_mod_export: found <db_use_table> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_init> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_close> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_query> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_raw_query> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_free_result> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_insert> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_delete> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: found <db_update> in module dbtext [/lib/openser/modules/dbtext.so] 0(0) find_mod_export: <db_replace> in module dbtext not found 0(0) DBT:dbt_cache_get_db: looking for db /etc/openser/dbtext! 0(0) DBT:dbt_cache_get_db: database [/etc/openser/dbtext] does not exists! 0(0) DBT:dbt_init: cannot get the link to database 0(0) PDT: mod_init: Error while connecting to database 0(0) init_mod(): Error while initializing module pdt ERROR: error while initializing modules - Configuration: loadmodule "/lib/openser/modules/dbtext.so" loadmodule "/lib/openser/modules/pdt.so" modparam("pdt", "db_url", "dbtext:///etc/openser/dbtext") #modparam("pdt", "db_table", "pdt") modparam("pdt", "prefix_column", "code") modparam("pdt", "domain_column", "hostname") #modparam("pdt", "prefix", "00") modparam("pdt", "hsize_2pow", 4) modparam("pdt", "sync_time", 300) modparam("pdt", "clean_time", 600) - /etc/openser/dbtext: hostname(str) code(str) groupX:2121 groupY.voip.nce.ufrj.br:3131

2 3

[Serusers] log (history of request)
by Legos Engineering 07 Sep '06

07 Sep '06

Hi I wish know if a tools or a log exist in order to know, when an user's boxe is connected and send a request of identification. I want to do on the webcare, stats and know who switch off his boxe ( and know too the uptime). If it's possible, thank to tell me where is the tools to do this.

2 1

[Serusers] New polycom firmware / presence
by harrygaillac-sip＠yahoo.fr 07 Sep '06

07 Sep '06

Hello, I look at the new sip firmware however i don't undanstand the presence features. I don't use LCS but SER as presence server this one is able to provide a ressource list server and xcap server for sip buddies lists . Does polycom phones can suscribe to a sip:lists@domain.com for example to watch buddies status ? Regards Harry ___________________________________________________________________________ Découvrez un nouveau moyen de poser toutes vos questions quelque soit le sujet ! Yahoo! Questions/Réponses pour partager vos connaissances, vos opinions et vos expériences. http://fr.answers.yahoo.com

1 0

[Serusers] How to integrate SER with Jabber IM.
by srinivas sriram 07 Sep '06

07 Sep '06

Hello, Can you please suggest me how to intergrate SER with Jabber IM. I am using SER 0.9.6 version of SER.Aiming to send a sip messages from the SER client to the Jabber Client. What are the changes to ser.cfg file and any other setting like Jabber.xml or MySql Database for SER intergation with Jabber IM.I am attaching my configuration file ser.cfg. Thank you, Regards, Sriram Srinivas.

1 0

[Serusers] How to integrate SER with Jabber IM.
by srinivas sriram 07 Sep '06

07 Sep '06

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users