sr-users

sr-users@lists.kamailio.org

37 participants
37510 discussions

Start a nNew thread

[Serusers] Telegram between 2 Clients
by Christian Mickler 13 Sep '06

13 Sep '06

Hi, how can i see the Telegram between 2 Clients by INVITE? Thanks!!!

1 0

[Serusers] SERWEB: classkit.so file can not be loaded. Why? Please help..Please
by Ferianto siregar 13 Sep '06

13 Sep '06

Dear all, Thank you very much to Karel Kozlik and all of you who always kind-hearted to help me. Thank you very much. Karel, I have tried your suggestion in installing serweb. I have installed the DB-1.7.6 and classkit-0.4 . This is the installation message : Build complete. (It is safe to ignore warnings about tempnam and tmpnam). running: make INSTALL_ROOT="/var/tmp/pear-build-root/install-classkit-0.4" insta ll Installing shared extensions: /var/tmp/pear-build-root/install-classkit-0.4/ usr/lib/php/modules/ running: find "/var/tmp/pear-build-root/install-classkit-0.4" -ls 362402 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4 362423 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr 362424 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib 362425 8 drwxr-xr-x 3 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib/php 362426 8 drwxr-xr-x 2 root root 4096 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib/php/modules 362422 60 -rwxr-xr-x 1 root root 49885 Sep 12 16:54 /var/tmp/pear -build-root/install-classkit-0.4/usr/lib/php/modules/classkit.so Build process completed successfully Installing '/var/tmp/pear-build-root/install-classkit-0.4//usr/lib/php/modules/c lasskit.so' install ok: classkit 0.4 Segmentation fault But when I tried to run it in the browser, the error message. The message says : Function aggregate_methods() doesn't exists. Try install Classkit extension. http://pecl.php.net/package/classkit I have add "extension=classkit.so" in php.ini file. But why this message still appear? When I tried to look the error_log file in /var/log/httpd/, I got this error message: [Tue Sep 12 16:59:45 2006] [notice] Digest: generating secret for digest authentication ... [Tue Sep 12 16:59:45 2006] [notice] Digest: done [Tue Sep 12 16:59:45 2006] [notice] LDAP: Built with OpenLDAP LDAP SDK [Tue Sep 12 16:59:45 2006] [notice] LDAP: SSL support unavailable PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib/php/modules/classkit.so' - /usr/lib/php/modules/classkit.so: cannot open shared object file: Permission denied in Unknown on line 0 [Tue Sep 12 16:59:45 2006] [notice] mod_python: Creating 4 session mutexes based on 256 max processes and 0 max threads. [Tue Sep 12 16:59:45 2006] [notice] Apache/2.0.54 (Fedora) configured -- resuming normal operations [Tue Sep 12 17:00:04 2006] [error] [client 202.95.149.251] File does not exist: /var/www/serweb/html/favicon.ico [Tue Sep 12 17:00:12 2006] [error] [client 202.95.149.251] File does not exist: /var/www/serweb/html/favicon.ico Sep 12 11:56:07 sip kernel: audit(1158036967.878:16): avc: denied { read } for pid=2958 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file Sep 12 11:56:07 sip kernel: audit(1158036967.878:17): avc: denied { read } for pid=2958 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file Sep 12 11:56:11 sip kernel: audit(1158036971.482:18): avc: denied { read } for pid=2978 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file Sep 12 11:56:11 sip kernel: audit(1158036971.482:19): avc: denied { read } for pid=2978 comm="httpd" name="classkit.so" dev=hdb6 ino=1499281 scontext=root:system_r:httpd_t:s0 tcontext=root:object_r:tmp_t:s0 tclass=file As I read from the error message, the file classkit.so can not be loaded? Why? Would you mind give me a solution? Please.... Thank you very much, Regards, Ferianto Karel Kozlik <karel(a)iptel.org> wrote: Hi, > Thank you much for your help. I am very happy to read this relpy message > from you . Thanks you..thank you very much. > Karel, may I ask you again..Please.. > What you mean by pear library? > I am using Fedora Core 5 and I found these packages are installed in my sorry, I don't know Fedora > > Do you mean that pear library is *php-pear-1.4.6-2 *that is installed? I think so. Karel > or I have install pear again? > Please help me..Karel.. I too lack. Please... > > Thank you very much..Thank you. > > > Regards, > > Ferianto > > */Karel Kozlik /* wrote: > > Hi, > > > 1. I have downloaded from pear.net the DB packet. The version of the > > packet is DB-1.7.6. I have untar it in root directory. I can > found the > > file DB.php in it. But I am confused, where should I place this > > DB.php file? So I can solve this error? Would ypu mind telling > me..Please.. > > Sould I have internet connection to install it? Because I do not > have > > internet connection now. > > Please read the documentation! > http://pear.php.net/manual/en/installation.cli.php > > You should not untar the file in clasic way. You should use: > pear install .tgz > instead. You have to have 'pear' binary installed before, of course. I > don't know what OS are you useing. There should be some package > containing the 'pear' binary. If there is not, read the instructions > here: > http://pear.php.net/manual/en/installation.getting.php > > > > 2. Would you mind telling me what you mean by "fix include_path > in your > > php.ini". > > Would you mind give me an example? Please... > > This mean if you have your pear library in diferent directory (e.g. > /usr/share/foo/bar/pear) you have to append this directory to > 'include_path' variable within php.ini (php configuration file). Read > the comments within php.ini for more info. > > regards Karel > > > ------------------------------------------------------------------------ > Do you Yahoo!? > Everyone is raving about the all-new Yahoo! Mail. > > --------------------------------- Get your own web address for just $1.99/1st yr. We'll help. Yahoo! Small Business.

2 2

[Serusers] Newbie question
by Mario François Jauvin 13 Sep '06

13 Sep '06

Hi, I have installed SER and asterisk on a redhat enterprise 4 linux box. I would like to find out how to: 1. configure SER so that when people dial 9,2226665555 it will redirect the call to asterisk for processing and forwarding to PSTN 2. I heard mentioned several times how asterisk can provide voicemail for SER clients and I would like to know how to set this up so that user can login to their mailbox 3. I would also like to know how users can be notified of their message indicators. 4. In addition to the info above I would like to know if there are links that describe this in greater details. Thanks, Mario

2 1

[Serusers] ser & sems
by Andy Thomas 13 Sep '06

13 Sep '06

Im running the latest ser with sems. Whenever I dial 958 I get the number reader announcement everytime. However when I dial an offline user or conference room, many times I dont get any speech. The call is connected but I just get silence. The server is on a public IP, so no nat issues. Firewall is correct, otherwise I wouldnt get the number reader working! All my fifo's are correct with the correct permissions etc, and my config file must be ok, as sometimes voicemail & conference announcements are played, sometimes not. Sems in debug mode displays this error everytime I get silence rather than the voicemail announcement- (4836) ERROR: stop (AmThread.cpp:99): pthread_detach failed with code EINVAL: thread already in detached state. Any ideas anyone?? Andy Thomas

2 1

[Serusers] Handling 302 responses
by Roger Lewau 13 Sep '06

13 Sep '06

Hello list, I have searched this list for an answer to the 302 response handling problem but found no real solution. It seems no one actually has an aswer for this so I studied the RFC 3261 and found the following statement: The requesting client SHOULD retry the request at the new address(es) given by the contact header field. In my mind that statement is completely off the wall, it is not the requesting client that should be responsible for establishing the forwarded call, it never is in the rest of the telecom industry so why should it be the case for SIP? Instead, this should ofcourse be the responsibility of the forwarding client or the service provider on behalf of the forwarding client. But as the RFC is not crafted that way I need to find a way to handle call forwarding in a proper way so that the cost for the forwarded call ends up on the forwarding clients bill. As call forwarding is a basic requirement in any phone network there must be some one reading this list who has solved this issue that can share there insight. Any help on this issue is highly apreciated. Kind regards Roger Lewau

5 12

[Serusers] SER as fake SBC...
by Natambu Obleton 13 Sep '06

13 Sep '06

I understand that SER is not an SBC, but I can see how it could maybe do it. So I started with hello-world.cfg from the onsip.org crowd and started playing. So I rewrite the contact address to send the address and port of the SER server and that works. I can make calls out, but when call come in they get routed to SER and it fails because my UA is not in the location database. # ------------------------------------------------------------------------ # Call Type Processing Section # ------------------------------------------------------------------------ if (uri!=myself) { if (method=="REGISTER") { if (!subst('/Contact: <sip:(.*)@(.*)>/Contact: <sip:\1@206.123.214.55:5060>/ig')) { log("******************************SUBST FAILED ************************************\n"); }; # save("location"); }; if (!t_relay()) { sl_reply_error(); }; break; }; When I have 'save("location")' in my configuration, Then I don't get registered with my softswitch. So what does 'save("location")' do exactly? Beside put an entry in my location database? Thanks. In my setup I am not using NAT at all. UA, SER, and my softswitch all have public ip addresses. Natambu Obleton Network Engineer FastTrack Communications nobleton(a)fasttrackcomm.net (970) 247-3366 office (970) 247-2426 fax

2 6

[Serusers] Need to work on subst().
by ravi reddy 13 Sep '06

13 Sep '06

Hi Ricardo , I too need the same process which you had done by subst(); function. two weeks back i had posted a mail to ser-users . regarding this issue. because one call-shop with the small sip-proxy using private ip-adress controls the remaing phones . and with one username i am giving access to all phones so that i can bill for one account only . but when a sip-phone registered to that callshop make call it forwards to my SER with contact id as eg: 12345(a)192.168.2.101 .so, the call comes in as it just requires authorise but when we hung the phone the "BYE" messages are not recieving by both end parties because SER is sending "BYE" messages to that contact-id that is private ip so call became "idle" for 30-40 seconds and after it shut down. so now i need to rewrite the contact part of that private ip-address and just use NAT ipadress of that sip-proxy(call-shop) i saw your subst(); funct. in your mail but i dont know where and how to use that,(I am not a programmer) So how you suggest me to do that for rewriting any private ip-adresss and replacing NAT-address so that the call will ends when it recieve "BYE" message . below is the trace of that: U 82.102.69.105:39871 -> 81.21.33.35:5060 INVITE sip:99106883@81.21.33.35:5060 SIP/2.0. To: "99106883"<sip:99106883@81.21.33.35 :5060>. From: "12345"<sip:12345@81.21.33.35:5060>;tag=c86b66ad8b9187c8. Via: SIP/2.0/UDP 192.168.1.100:5060;branch=z9hG4bK-d87543-bcf89635ebeba2e78782465686dfaf52-1--d87543-;rport. Via: SIP/2.0/UDP 192.168.1.102 ;branch=z9hG4bKf638e18b56022ea3. Call-ID: a78d5c993a9dd6b4(a)192.168.1.102. CSeq: 47344 INVITE. Record-Route: <sip:192.168.1.100:5060>. Contact: <sip: 192.168.1.100:5060>. Max-Forwards: 69. Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, OPTIONS, INFO, SUBSCRIBE. Content-Type: application/sdp. Supported: replaces. User-Agent: Grandstream BT110 1.0.8.23 . Content-Length: 361. Ricardo here i need to replace contact<sip:192.168.1.100> with above NAT ip address that is with 82.102.69.105:39871 how ??/ please assist me so that i can solve my problem. Thank You. Regards, Ravi.

2 1

[Users] jabber
by Javier Ramirez 13 Sep '06

13 Sep '06

Anyone has experience with jabber module ? I have a jabber server working, and openser working but I can't connect both. please, send me an example of openser.cfg if you want. best regards Javier

2 3

[Serusers] jabber
by Javier Ramirez 13 Sep '06

13 Sep '06

Anyone has experience with jabber module ? I have a jabber server working, and ser working but I can't connect both. please, send me an example of ser.cfg if you want. best regards Javier

2 1

Re: [Users] 513 Message too big
by Greg Fausak 13 Sep '06

13 Sep '06

Bill, I think there is different syntax for this, I used to use something like: if(len_gt(max_len)) { } But, I don't check for max length any more. Operating system assembly/disassembly for packets bigger than the mtu is transparent to me, I often work with big packets. Also, the mtu is different depending on where you look. I think some of the gig-ethernets use jumbo packets, then there is the 1500 byte or so regular mtu, then there is also possible modifications to the mtu depending on what the local transport is (cable, dsl, frame relay, etc). I still check for max hops :-) -g On Sep 12, 2006, at 8:38 PM, Bill Zhang wrote: > OK, I solved the problem(though I don't understand how it solved) > by adding > alias=" sip.mydomain.com", thanks to my old experience with SER:). > > Bill > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] > On Behalf > Of Bill Zhang > Sent: Tuesday, September 12, 2006 2:18 PM > To: users(a)openser.org > Subject: RE: [Users] 513 Message too big > > It does not help me here:(. I will get "Too Many Hops" (SIP > response 483), > it's something that seems to get my SIP message stuck in the first 2 > routines. > > Bill > -----Original Message----- > From: Ka Lun Chan (KC) [mailto:kchan1028@gmail.com] > Sent: Tuesday, September 12, 2006 1:04 PM > To: 'Bill Zhang' > Subject: RE: [Users] 513 Message too big > > I have the exact problem. I fixed by changing it to the following > instead: > > if (msg:len >= max_len ) { > sl_send_reply("513", "Message too big"); > return; > }; > > KC > -----Original Message----- > From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] > On Behalf > Of Bill Zhang > Sent: Tuesday, September 12, 2006 12:59 PM > To: users(a)openser.org > Subject: [Users] 513 Message too big > > Hi, > > I've exhausted my knowledge on openser:(. Following is my > openser.cfg which > is pretty much copy directly from sample but I kept getting "513 > Message too > big" response from this server for SIP registration, I know the SIP > registration message size is ONLY 555 bytes, what could be wrong here? > > Thanks in Advance! > > # > # $Id: openser.cfg,v 1.6 2006/02/15 18:23:46 bogdan_iancu Exp $ > # > # simple quick-start config script > # > > # ----------- global configuration parameters ------------------------ > > debug=4 # debug level (cmd line: -dddddddddd) > fork=yes > log_stderror=yes # (cmd line: -E) > > /* Uncomment these lines to enter debugging mode > fork=no > log_stderror=yes > */ > > check_via=no # (cmd. line: -v) > dns=no # (cmd. line: -r) > rev_dns=no # (cmd. line: -R) > port=5060 > children=4 > fifo="/tmp/openser_fifo" > > # > # uncomment the following lines for TLS support > #disable_tls = 0 > #listen = tls:your_IP:5061 > #tls_verify = 1 > #tls_require_certificate = 0 > #tls_method = TLSv1 > #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" > #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" > #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" > > # ------------------ module loading ---------------------------------- > > # Uncomment this if you want to use SQL database > loadmodule "/usr/local/lib64/openser/modules/mysql.so" > loadmodule "/usr/local/lib64/openser/modules/sl.so" > loadmodule "/usr/local/lib64/openser/modules/tm.so" > loadmodule "/usr/local/lib64/openser/modules/rr.so" > loadmodule "/usr/local/lib64/openser/modules/maxfwd.so" > loadmodule "/usr/local/lib64/openser/modules/usrloc.so" > loadmodule "/usr/local/lib64/openser/modules/registrar.so" > loadmodule "/usr/local/lib64/openser/modules/textops.so" > loadmodule "/usr/local/lib64/openser/modules/auth.so" > loadmodule "/usr/local/lib64/openser/modules/auth_db.so" > > # ----------------- setting module-specific parameters --------------- > > # -- usrloc params -- > #modparam("usrloc", "db_mode", 0) > # Uncomment this if you want to use SQL database > # for persistent storage and comment the previous line > modparam("usrloc", "db_mode", 2) > modparam("usrloc", "db_url", "mysql://openser:passwd@localhost/ > openser") > > # -- auth params -- > # Uncomment if you are using auth module > # > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > modparam("auth_db", "db_url", "mysql://openser:passwd@localhost/ > openser") > > # -- rr params -- > # add value to ;lr param to make some broken UAs happy > modparam("rr", "enable_full_lr", 1) > > # ------------------------- request routing logic ------------------- > > # main routing logic > > route{ > > # initial sanity checks -- messages with > # max_forwards==0, or excessively long requests > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > }; > > if (msg:len >= 2048 ) { > sl_send_reply("513", "Message too big"); > exit; > }; > > # we record-route all messages -- to make sure that > # subsequent messages will go through our proxy; that's > # particularly good if upstream and downstream entities > # use different transport protocol > if (!method=="REGISTER") > record_route(); > > # subsequent messages withing a dialog should take the > # path determined by record-routing > if (loose_route()) { > # mark routing logic in request > append_hf("P-hint: rr-enforced\r\n"); > route(1); > }; > > if (!uri==myself) { > # mark routing logic in request > append_hf("P-hint: outbound\r\n"); > # if you have some interdomain connections via TLS > #if(uri=~"@tls_domain1.net") { > # t_relay("tls:domain1.net"); > # exit; > #} else if(uri=~"@tls_domain2.net") { > # t_relay("tls:domain2.net"); > # exit; > #} > route(1); > }; > > # if the request is for other domain use UsrLoc > # (in case, it does not work, use the following command > # with proper names and addresses in it) > if (uri==myself) { > > if (method=="REGISTER") { > if (!www_authorize("sip.mydomain.com", > "subscriber")) { > www_challenge("sip.mydomain.com", > "0"); > exit; > }; > > save("location"); > exit; > }; > > lookup("aliases"); > if (!uri==myself) { > append_hf("P-hint: outbound alias\r\n"); > route(1); > }; > > # native SIP destinations are handled using our > USRLOC DB > if (!lookup("location")) { > sl_send_reply("404", "Not Found"); > exit; > }; > append_hf("P-hint: usrloc applied\r\n"); > }; > > route(1); > } > > > route[1] { > # send it out now; use stateful forwarding as it works > reliably > # even for UDP2TCP > if (!t_relay()) { > sl_reply_error(); > }; > exit; > } > > Bill > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users