sr-users

sr-users@lists.kamailio.org

39 participants
37513 discussions

[Users] ERROR 1062 (23000) at line 1: Duplicate entry '' for key 'phplib_id'
by Lindsey Hans Joseph Lao 04 Oct '06

04 Oct '06

Hello, I happen to encounter this error in Openser 1.1.0 with TLS: ERROR 1062 (23000) at line 1: Duplicate entry '' for key 'phplib_id' \E[37;31mERROR: introducing the new user '1050' to the database failed This happens when I try to add users to the mysql database using openserctl add username password email-address. Are there any workarounds for this? or is this a bug in the recent version? Thanks!

2 7

Re: [Serusers]More than one domain
by Ricardo Carvalho 04 Oct '06

04 Oct '06

Hi Kamal, modparam("usrloc", "timer_interval", 30) #Number of seconds between two timer runs. The module uses timer to delete expired contacts, synchronize with database and other tasks, that need to be run periodically. In case of crash or restart contacts that are in memory only and haven't been flushed yet will get lost. If you want minimize the risk, use shorter timer interval. Default value is 60. That description can be seen in the README file located at ser_source_dir/modules/usrloc/. Regards, Ricardo. Kamal.Mann(a)t-systems.com wrote: > Hi Ricardo > It's working now. Thanks a lot. Will you please specify the meaning of > 'modparam("usrloc", "timer_interval", 30)'. > > Thanks in anticipation > Kamal Mann > -----Original Message----- > From: serusers-bounces(a)lists.iptel.org > [mailto:serusers-bounces@lists.iptel.org] On Behalf Of Ricardo Carvalho > Sent: Wednesday, October 04, 2006 2:42 PM > To: serusers(a)lists.iptel.org > Subject: Re: [Serusers]More than one domain > > You need to edit ser.cfg with the following parameters: > > modparam("usrloc", "use_domain", 1) > modparam("registrar", "use_domain", 1) > modparam("usrloc", "timer_interval", 30) > > and you have to live blank the domain in the www_authorize and > www_challenge parameters so that it will work for every domain. In the > domain table you have to add every domain served too. Also add the > alias=every_domain_you_want_ser_to_listen_to in ser.cfg file. > > > Regards, > Ricardo. > > > > > > > > > Kamal.Mann(a)t-systems.com wrote: > >> Hi all >> >> I need to know the changes in configuration of ser if I want that a >> single server can serve more than one domain. >> >> Right now I am changing in following lines but it server only one >> domain at a time: >> >> >> >> /if (method=="REGISTER") {/ >> >> / / >> >> / if (!www_authorize("ims.de", "subscriber")) / >> >> / {/ >> >> / www_challenge("ims.de", "0");/ >> >> / break;/ >> >> / };/ >> >> / / >> >> / save("location");/ >> >> / break;/ >> >> / };/ >> >> >> >> Thanks in anticipation >> >> Kamal Mann >> >> >> > ------------------------------------------------------------------------ > >> _______________________________________________ >> Serusers mailing list >> Serusers(a)lists.iptel.org >> http://lists.iptel.org/mailman/listinfo/serusers >> >> > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org > http://lists.iptel.org/mailman/listinfo/serusers > >

1 0

Re: [Users] rtpproxy has been disabled temorarily
by Bogdan-Andrei Iancu 04 Oct '06

04 Oct '06

Ronald, you need to set also the "-l" parameter (listening address). regards, bogdan Ronald Wiplinger wrote: > taipei:~ # rtpproxy -s udp:xxx.xxx.xxx.xxx:22222 > rtpproxy: explicit binding address has to be specified in UDP command > mode > > ??? but it is anyway defined: > > taipei:~ # grep 2222 /home/ronald/downloads/rtpproxy/rtpp_defines.h > #define CPORT "22222" > > What do I still miss? >

1 0

[Serusers] How to keep track of currently active calls
by Ricardo Carvalho 04 Oct '06

04 Oct '06

Hi, As much as I know, active_sessions table exists to keep track of currently active web sessions, for use by serweb. Although, I don't have Serweb installed because I'm building my own web interface so I can't see those active sections looking at that table. Anyway, when I "select * from active_sessions", it doesn't retrieve nothing... I guess even with Serweb it wouldn't show anything because this table is always empty!! What may I be doing wrong? How may I enable active calls to be shown in that table? Regards, Ricardo.

1 0

[Users] SSL: connect failed ..Please help
by Ferianto siregar 04 Oct '06

04 Oct '06

Dear all, Thank you very much for you time . All, I am sorry. May I ask you again, please..? I got error message in minisip command prompt when I tried using TLS (Transport Method = TLS and Ntwork Port = 5061).But, without TLS , I can make a call with minisip. (User`s registration success) The error message says : A. in client command prompt init 6/9: Creating MSip SIP stack init 7/9: Connecting GUI to SIP logic init 8.2/9: Starting TCP transport worker thread init 8.3/9: Starting TLS transport worker thread init 9/9: Registering Identities to registrar server Registering user didit(a)202.95.149.251 to proxy 202.95.149.251, requesting domain 202.95.149.251 SipMessageTransport: sendMessage: creating new socket Creating new SSL_CTX SSL: connect failed SipMessageTransport: sendMessage: exception thrown! SipMessageTransport: sendMessage: creating new socket SSL: connect failed SipMessageTransport: sendMessage: exception thrown! SipMessageTransport: sendMessage: creating new socket SSL: connect failed SipMessageTransport: sendMessage: exception thrown! SipMessageTransport: sendMessage: creating new socket SSL: connect failed SipMessageTransport: sendMessage: exception thrown! B. in server terminal tls_tcpconn_init: Setting in ACCEPT mode (server) 11(5927) tcpconn_add: hashes: 835, 11 11(5927) handle_new_connect: new connection: 0x422d88f0 24 flags: 0002 11(5927) send2child: to tcp child 0 7(5919), 0x422d88f0 7(5919) received n=4 con=0x422d88f0, fd=20 7(5919) DBG: io_watch_add(0x80ed320, 20, 2, 0x422d88f0), fd_no=1 7(5919) tls_update_fd: New fd is 20 7(5919) tls_accept: Error in SSL: 7(5919) tls_error: error:1408F10B:SSL routines:SSL3_GET_RECORD:wrong version number 7(5919) DBG: io_watch_del (0x80ed320, 20, 1, 0x10) fd_no=2 called 7(5919) releasing con 0x422d88f0, state -2, fd=20, id=11 7(5919) extra_data 0x422e8a08 11(5927) handle_tcp_child: reader response= 422d88f0, -2 from 0 11(5927) tcpconn_destroy: destroying connection 0x422d88f0, flags 0002 11(5927) tls_close: Closing SSL connection 11(5927) tls_update_fd: New fd is 24 11(5927) tls_shutdown: Shutdown successful 11(5927) tls_tcpconn_clean: Entered What`s wrong? How to solve the error "SSL3_GET_RECORD:wrong version number" and "SSL: connect failed"? Please forgive me for my lack of skill and many questions Please tell me if I have shown my openser.cfg file. Thanks Thank you for your attention and Have a nice day :) Regards, Ferianto Note: 1. I use Redhat 9 [root@localhost root]# rpm -qa|grep -i ssl perl-Crypt-SSLeay-0.45-7 openssl-devel-0.9.7a-2 openssl-perl-0.9.7a-2 openssl-0.9.7a-2 pyOpenSSL-0.5.1-8 mod_ssl-2.0.40-21 openssl096b-0.9.6b-3 docbook-style-dsssl-1.76-8 openssl096-0.9.6-15 [root@localhost root]# --------------------------------- How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates. --------------------------------- Do you Yahoo!? Get on board. You're invited to try the new Yahoo! Mail.

2 1

RE: [Serusers] Presence
by senthil.nachimuthu＠bt.com 04 Oct '06

04 Oct '06

Hi Javier, Thanks for your information. I need to make SEP to send/proxy the message to my presence server. SEP and presence server are physically different entities. Would be of greater help if you could let me know how can i specify the IP address of my presence server in SEP so that the presence specific messages reaching SEP gets forwarded to my presence server. Thanks and Regards, Senthil Kumar, ________________________________ From: Javier Ramirez [mailto:jvr_78@yahoo.com.ar] Sent: 25 September 2006 15:03 To: Nachimuthu,SK,Senthil,XSD4C C Subject: Re: [Serusers] Presence if (method=="SUBSCRIBE") { if (!t_newtran()) { sl_reply_error(); }; handle_subscription("registrar"); }; if (method=="PUBLISH") { if (!t_newtran()) { log(1, "newtran error\n"); sl_reply_error(); }; handle_publish("registrar"); break; }; ----- Original Message ----- From: senthil.nachimuthu(a)bt.com To: serusers(a)lists.iptel.org Sent: Monday, September 25, 2006 8:28 AM Subject: [Serusers] Presence Hi, I want to configure SER <file://ser/about> 0.9.6 in such a way that It can proxy presence messages(SUBSCRIBE,PUBLISH) to presence server. Can you let me know how can I do that? Thanks and Regards, Senthil Kumar, Presence Capability, BT-Service Execution Platform, B62-MH,Orion Building,Adastral Park,Ipswich Work:+44 (0)1473 605 668 Mobile:+44 (0)7772287447 __________ NOD32 1.1768 (20060922) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com ________________________________ _______________________________________________ Serusers mailing list Serusers(a)lists.iptel.org http://lists.iptel.org/mailman/listinfo/serusers __________ NOD32 1.1768 (20060922) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com

4 3

[Users] rtpproxy has been disabled temorarily
by Ronald Wiplinger 04 Oct '06

04 Oct '06

If I use # -- nathelper -- modparam("nathelper", "rtpproxy_sock", "udp:59.124.210.41:22222") # default port 22222 #modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") modparam("nathelper", "natping_interval", 30) modparam("nathelper", "ping_nated_only", 1) modparam("nathelper", "sipping_from", "sip:59.124.210.41") # ----------------------------------------------------------------- # NAT detection # ----------------------------------------------------------------- route(2); route[1] { if (subst_uri('/(sip:.*);nat=yes/\1/')){ setflag(6); }; if (isflagset(5)||isflagset(6)) { route(3); } # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } route[2]{ force_rport(); if (nat_uac_test("19")) { if (method=="REGISTER") { fix_nated_register(); } else { fix_nated_contact(); }; setflag(5); }; } route[3] { if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")){ force_rtp_proxy(); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } failure_route[1] { if (isflagset(6) || isflagset(5)) { unforce_rtp_proxy(); } } I get in the log file: Oct 4 09:19:01 taipei Taipei-openser[4083]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4085]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4087]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4089]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4091]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4050]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4067]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily Oct 4 09:19:01 taipei Taipei-openser[4069]: WARNING: rtpp_test: support for RTP proxy <udp:59.124.210.41:22222>has been disabled temporarily with: modparam("nathelper", "rtpproxy_sock", "unix:/var/run/rtpproxy.sock") this error does not appear. In neither way it work for me (ring but no audio) Can anybody help me please? bye Ronald Wiplinger

2 1

[Users] NAT: STUN, nathelper, rtpproxy, mediaproxy
by Ronald Wiplinger 04 Oct '06

04 Oct '06

We have STUN, nathelper with rtpproxy or mediaproxy, ... maybe even more. Which one is good for which situation? What are the differences? How can I cover each situation? Can I combine different methods? bye Ronald

2 1

[Users] SER with multiple asterisks
by Adi Simon 04 Oct '06

04 Oct '06

Hi, I have one SER and two asterisk boxes. I'm trying to duplicate each register message from the client so it will reach each of the asterisks. I tried the following in my openser.cfg: if ( (is_method("SUBSCRIBE")) || (is_method("REGISTER")) ) { seturi("sip:nobody@10.0.0.1:5060"); append_branch("sip:parallel@10.0.0.2:5060"); if (!t_relay()) { sl_reply_error(); }; exit; } The first asterisk server registers the UA successfully. The second one gives this error: Oct 3 12:55:48 NOTICE[32364]: chan_sip.c:6395 check_auth: stale nonce received from 'sip:1234566@foo.bar' Transmitting (no NAT) to asterisk2:5060: I googled a bit and I understand I cannot fully duplicate a sip message since the nonce cannot be identical. Is there a way to recreate the sip message with another nonce? Is there any other solution to this scenario? Thanks, Adi.

1 1

[Serusers] SRV usage with SER
by Paul Antinori (pantinor) 04 Oct '06

04 Oct '06

Does SER support the SRV mechanism, sending a request to a URL with a SRV domain name? Also, if the first priority destination fails due to a timeout, will it failover to the second priority? Thanks for help, Paul

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users