sr-users

sr-users@lists.kamailio.org

39 participants
37513 discussions

RE: [Users] How to clear the destination set for redirection?
by Papadopoulos Georgios 11 Oct '06

11 Oct '06

Hello Klaus, I know this might not make perfect sence. If the user is registered (and if some other conditions are true that I have left out) then I want to redirect to an Asterisk server. Maybe this is not the best way to implement this, however shouldn't there be some way to clear the destination set? I mean something similar to resetdsturi(). thank you George > -----Original Message----- > From: Klaus Darilion [mailto:klaus.mailinglists@pernau.at] > Sent: Wednesday, October 11, 2006 4:14 PM > To: Papadopoulos Georgios > Cc: users(a)openser.org > Subject: Re: [Users] How to clear the destination set for redirection? > > > Hi! > > I do not understand why you even lookup the location if the > call is getting redirected? What do you want to implement? > > btw: you could use load_contacts from LCR module if the > contacts have different Q-value. > > regards > klaus > > Papadopoulos Georgios wrote: > > Hello, > > > > My senario is the following: userA is registered twice so > after lookup > > I have $ds = Contact: sip:userA@10.0.0.1:5060, > sip:userA@10.0.0.2:5060 > > > > I want to add a prefix and redirect to 10.0.0.9, so I do > > prefix("160000"); rewritehostport("10.0.0.9:5060"); > > xlog("L_DEBUG","$ds\n"); sl_send_reply("300", "Redirect"); > > > > and I get > > $ds = Contact: sip:160000userA@10.0.0.9:5060, > sip:userA@10.0.0.2:5060 > > > > The second uri is causing a problem, so I need to remove it > before the > > redirection. I tried resetdsturi() but it did not affect the > > destination set. Is there some way to keep only the first > uri? Maybe > > some way to clear the destination set before doing the redirection? > > > > thank you > > > > George > > > > > > Disclaimer > > The information in this e-mail and any attachments is > confidential. It is intended solely for the attention and use > of the named addressee(s). If you are not the intended > recipient, or person responsible for delivering this > information to the intended recipient, please notify the > sender immediately. Unless you are the intended recipient or > his/her representative you are not authorized to, and must > not, read, copy, distribute, use or retain this message or > any part of it. E-mail transmission cannot be guaranteed to > be secure or error-free as information could be intercepted, > corrupted, lost, destroyed, arrive late or incomplete, or > contain viruses. > > > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > >

2 1

[Users] IS XMPP module in Openser 1.1.0 or not...
by raviprakash sunkara 11 Oct '06

11 Oct '06

Hello Users.. Is XMPP module in OpenSER 1.1.0 , is there or not..... When search in openser.org in 1.1.x modules.. I didn't see it. But I Seen in 1.2.0 modules. Is the 1.2.0 full pledged stable or Not..... Please tel -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

2 1

[Users] How to clear the destination set for redirection?
by Papadopoulos Georgios 11 Oct '06

11 Oct '06

Hello, My senario is the following: userA is registered twice so after lookup I have $ds = Contact: sip:userA@10.0.0.1:5060, sip:userA@10.0.0.2:5060 I want to add a prefix and redirect to 10.0.0.9, so I do prefix("160000"); rewritehostport("10.0.0.9:5060"); xlog("L_DEBUG","$ds\n"); sl_send_reply("300", "Redirect"); and I get $ds = Contact: sip:160000userA@10.0.0.9:5060, sip:userA@10.0.0.2:5060 The second uri is causing a problem, so I need to remove it before the redirection. I tried resetdsturi() but it did not affect the destination set. Is there some way to keep only the first uri? Maybe some way to clear the destination set before doing the redirection? thank you George Disclaimer The information in this e-mail and any attachments is confidential. It is intended solely for the attention and use of the named addressee(s). If you are not the intended recipient, or person responsible for delivering this information to the intended recipient, please notify the sender immediately. Unless you are the intended recipient or his/her representative you are not authorized to, and must not, read, copy, distribute, use or retain this message or any part of it. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses.

2 1

[Users] SST module updated (repost)
by Ron Winacott 11 Oct '06

11 Oct '06

Hello all, I just updated the SST module to be fully compliant with the RFC. Here is a list of the biggest changes: 1) The script function sstCheckMin() will now add the Min-SE: header and send the 422 reply if the Session-Expire: header in the INVITE is too small. (with the argument flag set to true) The old sstCheckMin() function would return true stating that the Min-SE: value was too small, but the RFC states the 422 reply can *not* be sent without stating your Min-SE: value. 2) The Min-SE: and the Session-Expires: headers will be updated to your min_se value if in the initial request if too small. 3) If the UAC does not request SST support, the SST module will request it on behave of the PROXY. 4) The PRACK issue with the dialog module has been worked around. PRACK will clobber the dialog expires lifetime value but the SST module will fix it. 5) If the UAS does not support SST, the SST module will request the UAC refresh on behave of the PROXY. 6) reINTITE and UPDATE are now supported as refreshers to an active timed session. 7) The introduction of the sst flag parameter. This is keeping with the idea that the module will not do anything to a message unless asked for by the script (openser.cfg) file. You now have to setflag(sst_flag) just like you have to setflag(dialog_flag) for the module to act on a message. 8) Code clean up and commenting of all functions and beefed up the user documentation. Hope you find this module usefull, ronw (karwin) PS: this is a re-post to the user list, the first one did not make it. -- Ron Winacott - SOMA Networks, Inc. --- A bad xhost is a good thing to waste, here have a cookie! -- Brian Onn

1 0

[Serusers] how to enable acconting using mysql
by Ranjeet Kumar 11 Oct '06

11 Oct '06

Hi, I want to enable accounting on ser and it should store on mysql database. Could you please help me in doing so? I am using ser-0.9.6-1 with mysql. It is working fine but I want to have accounting as well. Please help me. Thanks, Ranjeet The information contained in, or attached to, this e-mail, contains confidential information and is intended solely for the use of the individual or entity to whom they are addressed and is subject to legal privilege. If you have received this e-mail in error you should notify the sender immediately by reply e-mail, delete the message from your system and notify your system manager. Please do not copy it for any purpose, or disclose its contents to any other person. The views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of the company. The recipient should check this e-mail and any attachments for the presence of viruses. The company accepts no liability for any damage caused, directly or indirectly, by any virus transmitted in this email. www.aztecsoft.com

1 0

[Users] serweb: DB.php is missing on my system
by Ronald Wiplinger 11 Oct '06

11 Oct '06

[Fri Sep 22 06:54:42 2006] [error] [client 192.168.250.108] PHP Warning: require_once(DB.php) [<a href='function.require-once'>function.require-once</a>]: failed to open stream: No such file or directory in /srv/www/serweb/html/main_prepend.php on line 38 [Fri Sep 22 06:54:42 2006] [error] [client 192.168.250.108] PHP Fatal error: require_once() [<a href='function.require'>function.require</a>]: Failed opening required 'DB.php' (include_path='.:/usr/share/php5:/usr/share/php5/PEAR') in /srv/www/serweb/html/main_prepend.php on line 38 # locate DB.php /usr/share/php5/PEAR/PEAR/DependencyDB.php How can I get it? In the meantime I have tried to turn off loging in config.php: $config->enable_loging = false; $config->log_file = "/var/log/serweb"; but get still the same error. SuSE 10.1 installed pear5 (there is no 'pear') # pear5 list Installed packages, channel pear.php.net: ========================================= Package Version State Archive_Tar 1.3.1 stable Console_Getopt 1.2 stable PEAR 1.4.6 stable # pear5 list-all PHP Fatal error: Allowed memory size of 8388608 bytes exhausted (tried to allocate 8208 bytes) in /usr/share/php5/PEAR/PEAR/Registry.php on line 1048 What do I need to do? bye Ronald

2 4

Re: [Users] help with configuring openser on vmware
by Seema 11 Oct '06

11 Oct '06

Hi, result of openser -c -f openser.cfg says that config is ok. root@ubuntu:/usr/local/etc/openser# openser -c -f openser.cfg 0(7604) WARNING: fix_socket_list: could not rev. resolve 192.168.0.108 0(7604) WARNING: fix_socket_list: could not rev. resolve 192.168.0.108 Listening on udp: 192.168.0.108 [192.168.0.108]:5060 tcp: 192.168.0.108 [192.168.0.108]:5060 Aliases: WARNING: no fork mode config file ok, exiting... here is the config file: $Id: openser.cfg,v 1.5 2005/10/28 19:45:33 bogdan_iancu Exp $ # # simple quick-start config script # # ----------- global configuration parameters ------------------------ debug=4 # debug level (cmd line: -dddddddddd) fork=no log_stderror=yes # (cmd line: -E) /* Uncomment these lines to enter debugging mode fork=no log_stderror=yes */ check_via=no # (cmd. line: -v) dns=no # (cmd. line: -r) rev_dns=no # (cmd. line: -R) listen=192.168.0.108 listen=127.0.0.1 port=5060 children=4 fifo="/tmp/openser_fifo" # # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify = 1 #tls_require_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- # Uncomment this if you want to use SQL database #loadmodule "/usr/local/lib/openser/modules/mysql.so" loadmodule "/usr/local/lib/openser/modules/sl.so" loadmodule "/usr/local/lib/openser/modules/tm.so" loadmodule "/usr/local/lib/openser/modules/rr.so" loadmodule "/usr/local/lib/openser/modules/maxfwd.so" loadmodule "/usr/local/lib/openser/modules/usrloc.so" loadmodule "/usr/local/lib/openser/modules/registrar.so" loadmodule "/usr/local/lib/openser/modules/textops.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "/usr/local/lib/openser/modules/auth.so" #loadmodule "/usr/local/lib/openser/modules/auth_db.so" # ----------------- setting module-specific parameters --------------- # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay_to_tls("IP_domain1","port_domain1"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay_to_tls("IP_domain2","port_domain2"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } On 10/10/06, ram <talk2ram(a)gmail.com> wrote: > Hi > > i recomend before you run > > try to see if the config is ok > > openser -c -f openser.cfg > > you get errors , kindly post them > > or post your config along with errors > > its easy to help > > Ram > > > On 10/9/06, Seema <seema.p.a(a)gmail.com> wrote: > > > > I have ubuntu running on a vmware server on my windows machine. I have > > installed openser on ubuntu. The network connection is bridged. > > I have set listen=vmware's ip in openser.cfg > > > > When I start openser, it gives me a warning > > fix_socket_list: cannot resolve (ip addressin cfg) > > > > I dont know if this is the cause of the problem, but I cannot register > > a minisip client with the openser server. The client runs on my > > windows m/c ,so its url is client@windowsip and its sip proxy address > > is openser's ip. > > > > Ethereal shows me that the client is sending a request:register but it > > seems to be getting a request:register back as well whereupon the > > client replies with a icmp dest unreachable. > > > > I have no experience with voip, and would greatly appreciate any help. > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org > > http://openser.org/cgi-bin/mailman/listinfo/users > > > >

2 1

[Users] Multi Call-Legs accounting
by Ricardo Carvalho 11 Oct '06

11 Oct '06

Is it possible in openser to store in DB B's contact in multi call-legs calls (when A calls B but B forwards blindly in his phone to C)? I've configured my openser.cfg script the following way, but it only stores in DB A and C contacts for each forwarded call!! ------------------------------------------------------------------------------------------------- modparam("acc", "multi_leg_enabled", 1) modparam("acc", "src_leg_avp_id", 110) modparam("acc", "dst_leg_avp_id", 111) ... route { ## populate the avps (for Multi call leg accounting): if (!method=="REGISTER" && !method=="NOTIFY") { avp_write("$from/username", "$avp(i:110)"); avp_write("$ruri/username", "$avp(i:111)"); }; ..... ------------------------------------------------------------------------------------------------- Regards, Ricardo.

2 1

[Users] Editing config makes openser unable to restart
by Max Gregorian 11 Oct '06

11 Oct '06

Hi, Just wondering if anyone else has had this problem. Sometimes when I make some simple changes to the *openser.cfg* config file and save, then restart openser using the *openserctl restart* or *stop* and *start* commands, openser refuses to come back up with an error message, usually along the lines of "openser already running?" or "openser.pid not found" or something similar. I will see if I can find the exact wording of the error messages and post them here. I can then only get it running again by copying an old (working) config into the directory and renaming it to *openser.cfg* then adding the entries back again to the config and restarting the server. Am I stopping and starting openser to quickly or something? Other things I have tried include searching for running openser processes and using *kill xx* or *killall openser* to manually terminate them, but no running processes can be found, which makes me wonder why the error message keeps saying openser is already running. Also *ps -ef* and other similar commands are showing no running openser instances. *openserctl moni* says cannot find pid or fifo (I forget which) and *openserctl ps* also gives some error. Sometimes when this happens I notice that the *openser.pid* file still exists even though openser has stopped running. Now I am wondering if it is something to do with the way openser parses the script, or whether it's to do with the ssh program I use to remotely connect to the openser server somehow not writing the file correctly when it saves. In case it's relevant, I use WinSCP ver 3.8.2 to edit my configs. Any ideas?

1 0

[Users] SIP vz IAX...
by raviprakash sunkara 10 Oct '06

10 Oct '06

Hello Users..... I'm in Dilemma with the performance on SIP and IAX.... Can any one help ... 1) Difference between the SIP and IAX... which one is Best... in VOIP service I'm using only SIP protocol for my VOIP in OpenSER... And Also I using Asterisk in SIP.... we can Communicate the SIP and IAX by below scenario SIP (UA) --------> OPENSER -----> ASTERISK --------> IAX (UA)....... this I can do... IAX -----------> OPENSER -----> ASTERISK ---------> SIP/IAX. But main problem is ... Suppose IAX ------> ASTERISK-----------> openSER ------------> SIP / IAX ... How ? Help me this.... forgive me in English.... :P -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 O:+91 40 23114549 F:+91 40 40208727 ravi.sunkara(a)hyperion-tech.com www.hyperion-tech.com

5 4

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users