sr-users

sr-users@lists.kamailio.org

42 participants
37517 discussions

[Users] Changing TM Retransmission Count?
by Tavis P 23 Oct '06

23 Oct '06

Reading through the documentation for the TM module (1.1.0) i've been unable to find anything indicating that i can change the retransmission count, only the retransmission intervals By my count OpenSER is retransmitting an INVITE to an endpoint user 12 times and i would like to reduce this as it is interfering with the call forward no answer logic i've put in place (timer doesn't hit until all 12 retransmissions are sent, which is about 42 seconds using the default timers) Do i have any options other than modifying the tm module code? If so, could someone give me a pointer where i need to look (i've had a quick read and its rather complicated so i might take me some time to find the logic i'm looking for) tavis

3 3

[Users] aliases
by Benko 23 Oct '06

23 Oct '06

Hello! Are entries in the aliases table only read at startup? While a record that was in the table before i started openser is available since the beginning, a entry i inserted a while ago(+1h) but after starting openser is still not working(and also doesn't appear in the memory cache). I'd be glad if someone can give me info on this particular matter, thx! Regards Christian p.s.: just stumbled over dbaliases, guess this will work better...

2 3

[Users] Enabling caller id block on outbound calls.
by Shane Burrell 23 Oct '06

23 Oct '06

We have grandstreams and a few customers that want to block there outbound caller id. Has anyone done this? I'd really like the *30 and *31 feature to work but if you turn it on the openser server blocks the call. TIA, Shane

3 2

[Serusers] Problem with radius - ser setup
by Lokesh Kumar 23 Oct '06

23 Oct '06

Hello List , I have problem with the authentication of users via Radius. Mentioned below are the logs. Can anyone please give me hint where I am doing wrong , I did exactly as mentioned in the ser-radius how to. The logs from Radius are like the mentioned below. Sip-Uri-User = "211069020" NAS-Port = 5060 NAS-IP-Address = 127.0.0.1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 14421 modcall[authorize]: module "preprocess" returns ok for request 14421 modcall[authorize]: module "chap" returns noop for request 14421 modcall[authorize]: module "mschap" returns noop for request 14421 rlm_digest: Adding Auth-Type = DIGEST modcall[authorize]: module "digest" returns ok for request 14421 rlm_realm: Looking up realm "xxx.pt" for User-Name = "211069020(a)XXX.pt" rlm_realm: No such realm "xxx.pt" modcall[authorize]: module "suffix" returns noop for request 14421 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 14421 users: Matched entry DEFAULT at line 152 users: Matched entry 211069020(a)xxx.pt at line 217 modcall[authorize]: module "files" returns ok for request 14421 modcall: leaving group authorize (returns ok) for request 14421 rad_check_password: Found Auth-Type Digest auth: type "digest" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 14421 rlm_digest: Converting Digest-Attributes to something sane... Digest-User-Name = "211069020" Digest-Realm = "xxx.pt" Digest-Nonce = "453c9377946262d76fceca014a1553f8384db20f" Digest-URI = "sip:xxx.pt" Digest-Method = "REGISTER" Digest-QOP = "auth" Digest-Nonce-Count = "00000001" Digest-CNonce = "5640622967614" A1 = 211069020:xxx.pt:211069020 A2 = REGISTER:sip:xxx.pt KD = f7d0e83a9277bd217ba41ac8e070aee4:453c9377946262d76fceca014a1553f8384db20f:00 000001:5640622967614:auth:4a210dfe3dc88ca825764f5ea20d8b01 modcall[authenticate]: module "digest" returns ok for request 14421 modcall: leaving group authenticate (returns ok) for request 14421 radius_xlat: 'Authenticated from Radius' Sending Access-Accept of id 131 to 127.0.0.1 port 56964 Reply-Message = "Authenticated from Radius" Sip-Rpid = "211069020" Finished request 14421 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 127.0.0.1:56965, id=132, length=57 User-Name = "@xxx.pt" Service-Type = Callback-Administrative NAS-Port = 0 NAS-IP-Address = 127.0.0.1 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 14422 modcall[authorize]: module "preprocess" returns ok for request 14422 modcall[authorize]: module "chap" returns noop for request 14422 modcall[authorize]: module "mschap" returns noop for request 14422 modcall[authorize]: module "digest" returns noop for request 14422 rlm_realm: Looking up realm "xxx.pt" for User-Name = "@xxx.pt" rlm_realm: No such realm "xxx.pt" modcall[authorize]: module "suffix" returns noop for request 14422 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 14422 users: Matched entry DEFAULT at line 152 modcall[authorize]: module "files" returns ok for request 14422 modcall: leaving group authorize (returns ok) for request 14422 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 14422 rlm_unix: Attribute "User-Password" is required for authentication. modcall[authenticate]: module "unix" returns invalid for request 14422 modcall: leaving group authenticate (returns invalid) for request 14422 auth: Failed to validate the user. Delaying request 14422 for 1 seconds Finished request 14422 Going to the next request Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 14421 ID 131 with timestamp 453c9257 Sending Access-Reject of id 132 to 127.0.0.1 port 56965 Cleaning up request 14422 ID 132 with timestamp 453c9257 Nothing to do. Sleeping until we see a request. And the logs from ser are like the mentioned below. 0(15034) found end of header 0(15034) find_first_route: No Route headers found 0(15034) loose_route: There is no Route HF 0(15034) parse_headers: flags=-1 0(15034) check_via_address(212.13.42.65, 192.168.0.47, 0) 0(15034) parse_headers: flags=64 0(15034) check_nonce(): comparing [453c93b9459779f9f51440d01f13c9e0db2b2965] an d [453c93b9459779f9f51440d01f13c9e0db2b2965] 0(15034) radius_authorize_sterman(): Success 0(15034) save_rpid(): rpid value is '211069020' 0(15034) radius_does_uri_exist(): Failure 0(15034) parse_headers: flags=-1 0(15034) check_via_address(212.13.42.65, 192.168.0.47, 0) 0(15034) DEBUG:destroy_avp_list: destroying list 0xf5062350 0(15034) receive_msg: cleaning up 0(15034) SIP Request: 0(15034) method: <OPTIONS> 0(15034) uri: <sip:xxx.pt:5060> 0(15034) version: <SIP/2.0> 0(15034) parse_headers: flags=1 0(15034) Found param type 235, <rport> = <n/a>; state=6 0(15034) Found param type 232, <branch> = <z9hG4bKc0a8002f0000000b453c94d700006 3800000fc1b>; state=16 0(15034) end of header reached, state=5 0(15034) parse_headers: Via found, flags=1 0(15034) parse_headers: this is the first via 0(15034) After parse_msg... 0(15034) preparing to run routing scripts... 0(15034) parse_headers: flags=128 0(15034) DEBUG: get_hdr_body : content_length=0 0(15034) get_hdr_field: cseq <CSeq>: <11858> <OPTIONS> 0(15034) DEBUG:maxfwd:is_maxfwd_present: value = 70 0(15034) DBG:maxfwd:process_maxfwd_header: value 70 decreased to 16 0(15034) DEBUG: add_param: tag=56414607811795 0(15034) end of header reached, state=29 0(15034) parse_headers: flags=256 0(15034) end of header reached, state=9 0(15034) DEBUG: get_hdr_field: <To> [29]; uri=[sip:xxx.pt:5060] 0(15034) DEBUG: to body [<sip:xxx.pt:5060> ] 0(15034) found end of header 0(15034) find_first_route: No Route headers found 0(15034) loose_route: There is no Route HF 0(15034) lookup(): '' Not found in usrloc 0(15034) lookup(): '' Not found in usrloc 0(15034) parse_headers: flags=-1 0(15034) check_via_address(212.13.42.65, 192.168.0.47, 0) 0(15034) DEBUG:destroy_avp_list: destroying list (nil) 0(15034) receive_msg: cleaning up The users file in raddb is like this 211069020(a)xxx.pt Auth-Type := Digest, User-Password == "211069020" Reply-Message = "Authenticated from Radius", Sip-Rpid = "211069020" 211069020(a)xxx.pt Sip-Group == "local", Auth-Type := Accept Reply-Message = "Authorized" "users" 221L, 7200C I have mentioned dictionary.ser in radius and radiusclient. Where I am doing wrong can anyone please give a hint. Thank you very much Lokesh -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.9/490 - Release Date: 10/20/2006

2 1

[Serusers] ser 0.10 status
by Mark Price 23 Oct '06

23 Oct '06

How far is ser 0.10 from being usable in production? mark

3 2

[Serusers] SER + RTP Proxy Silence
by Abdul Qadir 23 Oct '06

23 Oct '06

Hi, I m running SER 0.9.6 on FC5. with rtpproxy running on same machine. The communicatin betwwn SER and rtpproxy is 100 % ok since when ever I make calls from one softphone to another I get valid ports,plus i also confirmed by the messages displayed by rtpproxy like new command etc and other mappings. The problem is rtpproxy is not relaying the RTP packets, although I confirmed the RTP packets from both clients reached the SER + rtpproxy machine and are sent on the same port specified by rtpproxy. Can any body tell whats wrong Best Regards, Abdul Qadir --------------------------------- How low will we go? Check out Yahoo! Messengers low PC-to-Phone call rates.

2 1

[Serusers] nat + MESSAGE packets
by Mark Price 23 Oct '06

23 Oct '06

Hi, I'm finding that my ser clients can't can only unreliably communicate using MESSAGE packets, and that presence and presence subscriptions are equally unreliable (i.e. very). The odd thing is that they do sometimes, in fact, work. Anyways, I discovered that there are definitely NAT issues going on, since I can see inbound MESSAGE packets banging on the outside of my firewall. What are people doing to mitigate this? Mark

5 6

[Serusers] How to use domain module without database or with radius???
by Lokesh Kumar 23 Oct '06

23 Oct '06

Hi list, I have an issue with domain module which needs database support, and I want to use radius, but in domain module there is no mention of using this module without database, how to solve this problem please suggest something Thanks you very much Regards Lokesh -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.408 / Virus Database: 268.13.5/483 - Release Date: 10/18/2006

2 3

[Serusers] rfc 3262 support
by Kamal.Mann＠t-systems.com 23 Oct '06

23 Oct '06

Hi All Do SER supports 'rfc 3262 Reliability of Provisional Responses in SIP'? Is there any list of standards supported by SER available?? Regards Kamal Mann

3 7

[Serusers] reinvite accounting
by olivier.taylor 23 Oct '06

23 Oct '06

hi all, Using Ser 0.9.6 and asterisk(s) as pstn gateways. Asterisks are used for the Billing on the pstn. For sip --> sip calls, no billing, just accounting of the normal and missed calls. The problem is REINVITEs, ACC module record all the Invites and ACK, even when it's a Reinvite (has_totag). I use the flags for telling Ser what to account, I never set the flags for Reinvites, not even reset the flags. Is ther a simple way to avoid recording of Reinvites in the ACC table? Thanks, Olivier

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users