sr-users

sr-users@lists.kamailio.org

42 participants
37517 discussions

[Users] contact header radius accounting
by Christian Schlatter 30 Oct '06

30 Oct '06

hi all, I'd like to include caller and callee SIP contact header in radius accounting messages. Our dynamic QoS provisioning framework needs this information to set up QoS per source/destination IP address pair. Caller contact header is easily done using radius_extra and setting an AVP in the INVITE handling route block. But I haven't figured out yet how I could store the callee's contact header in an AVP. The main problem I have is that I can't use any AVP related functions in onreply_route blocks. What I'd like to do is something like modparam("acc", "radius_extra", \ "Originating-Station-IP=$avp(AVP_ORIG_IP); \ Destination-Station-IP=$avp(AVP_DEST_IP)") onreply_route[ONREPLY_DEFAULT_RELAY] { if (t_check_status("2[0-9]{2}")) { avp_write("$ct", "$avp(AVP_DEST_IP)"); } } I've learned from an earlier mail thread (http://www.openser.org/pipermail/users/2005-October/001272.html) that enabling AVP functions in on_reply routes would be rather difficult. Is there still a chance that on_reply AVP handling gets implemented? And is there an alternative method how this could be achieved without patching the acc module? thanks, Christian

2 1

[Users] Redirect with openSER depending on the DNS SRV response
by Oezguer Akkaya 30 Oct '06

30 Oct '06

Dear OpenSER Users or Admins, I would like to setup OpenSER as a SIP Redirect Server in my environment. The point is to redirect depending on the response from DNS or even better DNS SRV. The SIP UA will get than as quick as possible the 3xx Response and resend the request to the redirected address (IP or Domain address) SIP Device. Is there a possible way to do that via config? How many SIP Request (e.g. REGISTER, INVITE) will it be possible to redirect per second? Thanks in Advance for your responses Oetzi

2 1

[Users] Two Invites simultaneously
by ShivaSankar Padhy 30 Oct '06

30 Oct '06

Hi every one, I am a new user of the openser.When I am trying to call to a number, the invite messege is going to proxy server but from proxy, its sending two invites simultaneously to two phones. I am attaching my openser.cfg for your kind information.Point to be noted that, when the phone resisters, no value is being inserted in to the location table of openser Database. Thanks in Advance, Shiva

3 2

[Users] Why is a second RPID header created when I do two subst()?
by Alan Crosswell 30 Oct '06

30 Oct '06

Please ignore previous post which I sent before completing! I have two problems: 1. A 2nd Remote-Party-ID header gets appended when I try to do two subst() on it. 2. Xlog seems to only have a ref to the orignal unedited rpid header. I am attempting to clean up my Remote-Party-ID header so that my Polycom UAs will display the incoming number as a number rather than as a URI. This requires the domain to match that of the UA's server (e.g. siptest.columbia.edu). And, I want to rewrite incoming calling numbers from my PBX to be in 5-digit format and other US 10-digit numbers into proper E.164 format since my PBX and at least one of my ITSPs doesn't provide them as E.164. So, I do a couple of subst() operations on INVITEs. What's wierd is that one Remote-Party-ID header becomes two when it gets to the UA. The call flow is: INVITE r-uri <sip:10508@128.59.59.96:5060> from <sip:9174147124@128.59.59.242> With the original RPID header as: Remote-Party-ID: <sip:9174147124@128.59.59.242> And after route[10] the headers that end up on the UA are: Remote-Party-ID: <sip:9174147124@siptest.columbia.edu> Remote-Party-ID: <sip:+19174147124@128.59.59.242> It looks like the 2nd subst() happened against the original RPID, not the edited one and somehow two RPID headers got created. Here's the code for the route block: route[10] { xlog("L_INFO","route[10] $ci: method $rm r-uri <$ru> from <$fu> rpid <$re>\n"); # first just clean out the domain name subst('/^(Remote-Party-ID:.*<sip:.*)@.*>(.*)$/\1(a)siptest.columbia.edu>\2/'); # now strip our numbers down to 5 digits subst('/^(Remote-Party-ID:.*<sip:)(\+)?(1)?21285([134][0-9]{4})@/\1\2/'); # expand 10-digit NANP numbers to E.164 subst('/^(Remote-Party-ID:.*<sip:)([0-9]{10}.*$)/\1+1\2/'); # ??? xlog doesn't show the result of rewriting it. # xlog("L_INFO","route[10] RPID is now <$re>\n"); xlog("L_INFO","route[10] $ci: RPID was rewritten.\n"); return; } #end of route[10] Any help with this would be greatly appreciated! /a

2 1

[Users] openser.cfg
by simo med 30 Oct '06

30 Oct '06

dear sir or madame; i'm trying to start an openser, but i can't, i need to configure properly my openser.cfg! if you have an example of how can i configure my openser.cfg, to make it work, i will very thanksfull simo

2 1

[Users] How to xlog failure status in failure_route?
by Alan Crosswell 30 Oct '06

30 Oct '06

I tried xlog $rs $rr to log the reason for a failure in failure_route but it just logs NULL. What am I doing wrong? The error status is available to test with t_check_status and is logged by ACC but not xlog. # Error from media gateway failure_route[4] { xlog("L_INFO","failure_route[4] $si: method $rm r-uri <$ru>\n"); if (t_check_status("(5..)|(6..)|(403)")) { # gateway failure/refusal xlog("L_INFO","failure_route[4] gateway returned 5xx or 6xx. Status: $rs $rr\n"); if (!next_gw()) { xlog("L_CRIT","No more gateways for <$tu>\n"); t_reply("503", "Service not available - No more gateways"); return; } else { xlog("L_INFO","failure_route[4] next gw r-uri <$ru> \n"); t_on_failure("4"); t_relay(); return; } } xlog("L_INFO","failure_route[4]: relaying normal error\n"); t_relay(); } Oct 26 18:02:04 jello /usr/sbin/openser[2028]: ACC: call missed: method=INVITE, i-uri=sip:9319174147124@siptest.columbia.edu;user=phone, o-uri=sip:19174147124@67.151.91.22:50 60;transport=udp, call_id=c141e612-75cfa484-cfce783b(a)128.59.37.218, from="Alan Crosswell" <sip:10508@siptest.columbia.edu>;tag=CA5BDB76-6DB44EED, code=403 Forbidden Oct 26 18:02:04 jello /usr/sbin/openser[2028]: failure_route[4] 128.59.37.218: method INVITE r-uri <sip:19174147124@67.151.91.22:5060;transport=udp> Oct 26 18:02:04 jello /usr/sbin/openser[2028]: failure_route[4] gateway returned 5xx or 6xx. Status: <null> <null> Oct 26 18:02:04 jello /usr/sbin/openser[2028]: failure_route[4] next gw r-uri <sip:19174147124@67.151.91.22:5060;transport=udp>

2 1

[Users] Adapting the openserctrl file to a UNIX odbc client...
by Marvin Ottley 30 Oct '06

30 Oct '06

Hello all, I am looking for some information/pointers on how to adapt the openserctl file to use a UNIX ODBC client. Thanks, Marvin

2 1

[Users] Ring group
by Marcos Biscaysaqu 29 Oct '06

29 Oct '06

Hi there. I just getting my Opserser server up and I want to be able to create child accounts from my system to be able to ring multiple extension at the same time, is this possible ? Thanks Marcos Biscayaqu

2 1

[Users] openser and PSTN
by geovani ferronetti 29 Oct '06

29 Oct '06

Hi, I want to connect OpenSER with PSTN, as media gateway I use Cisco AS5300, vfc c542. I am interested about config part from OpenSER. Where I can get some documentation, information? Thx __________________________________________________ Do You Yahoo!? Poco spazio e tanto spam? Yahoo! Mail ti protegge dallo spam e ti da tanto spazio gratuito per i tuoi file e i messaggi http://mail.yahoo.it

2 2

[Users] yate client windows
by sinclair fils 29 Oct '06

29 Oct '06

hello, all someone can tell me how i can configurate yate client to work which openser when i make a config the account cant register please help ___________________________________________________________________________ Découvrez une nouvelle façon d'obtenir des réponses à toutes vos questions ! Profitez des connaissances, des opinions et des expériences des internautes sur Yahoo! Questions/Réponses http://fr.answers.yahoo.com

4 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users