sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

[Serusers] Answering with music?
by Evert 13 Nov '06

13 Nov '06

Hi all! For testing purposes I want certain extensions being answered with streamed music. I guess this requires certain routing in SER (and perhaps a SIP client?) Has anyone done something similar before? Where/how should I start? Regards, Evert

3 3

[Serusers] Any resolution to the presence core dump?
by SER LIST 13 Nov '06

13 Nov '06

I was wondering whether a patch or a new release is available to the issue of presence core dumping on a regular basis that was reported short while back? Thanks in advance. >The version 0.10.99 of presence snapshot core dumps on a regular basis after running for a certain time. Doing a gdb shows that the core dump occurs at msg_queue_destroy: >#0 0x001b87f2 in msg_queue_destroy (q=0xb6293e98) > at /usr/local/src/ser-0.10.99-dev35-pa-4.1/lib/../fastlock.h:147 >147 asm volatile( > _________________________________________________________________ Not only does Windows Live OneCare provide all-in-one PC care to keep your computer protected and well-maintained, but it also makes creating backup files a breeze. Try it today! http://ideas.live.com/programpage.aspx?versionid=b2456790-90e6-4d28-9219-5d…

3 2

[Serusers] XCAP server
by Jayantheesh Srimushnam - TLS, Chennai 13 Nov '06

13 Nov '06

Hi All, I have downloaded the SER and trying to run XCAP server. I have gone through the README file for the XCAP server and understood that it is server simulation. Still I didn't get how to install and run it. Could anyone please through some light on this? Thanks, Jayantheesh DISCLAIMER The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any mail and attachments please check them for viruses and defect.

2 1

[Serusers] Registering SIP UA from the internet
by "tzieleniewski" 13 Nov '06

13 Nov '06

Hi All!! According to the SER -Getting Started Manual SER is located in the local network and has an local IP adres. Is it some how possible to register the SIP UA from the outside of the local net?? I mean can I register them without giving SER an public IP adress?? If yes then what do I have to specify (what adress) in the softphones configuration in the SIP Proxy section?? Thanks 4 any help! Bests

2 2

[Serusers] Change SDP
by Benito Caracuel 13 Nov '06

13 Nov '06

Hello All, Basic Concept: I have to change the Path MSRP into SDP field in an INVITE and relay the new INVITE. SDP EXAMPLE: v=0 o=686873200 3372497915 3372497916 IN IP4 80.27.211.205 s=SipSession c=IN IP4 80.27.211.205 t=0 0 m=message 49152 TCP/MSRP * a=direction:active a=accept-types:text/plain a=path:msrp://80.27.211.205:49152/63331682315468750;tcp When I receive the SDP, I have to change "msrp://80.27.211.205:49152", so I execute an script and I obtain the new SDP into file.txt. Now, I need to replace the old msrp path by the new sdp path, which is into file.txt In my ser.cfg: if (method=="INVITE") { exec_msg("printenv SRCIP > /tmp/invite.txt; cat >> /tmp/invite.txt; /bin/bash /usr/local/ser_snapshot/sbin/controlador"); #I have the new SDP in /tmp/test.txt exec_msg("set `cat /tmp/test.txt`; %var = $1"); #I have the new SDP in $var replace_all("msrp:\/\/[0-9\.:]{2,20}","%$var"); # I don't know why $var = null!!!! I need that $var = cat /tmp/test.txt but i don't know how to do this!!!!! t_relay(); break; }; Please help me, Thank you very much. Ben. _________________________________________________________________ Busca desde cualquier página Web con una protección excepcional. Consigue la Barra de herramientas de Windows Live hoy mismo y GRATUITAMENTE. http://www.toolbar.live.com

1 0

[Serusers] Presence - PA AND RLS
by SER LIST 13 Nov '06

13 Nov '06

Hi, I am not sure whether PA module access the XCAP server or not? I have users presence rules configured on XCAP server, but all my clients are getting a NOTIFY w/ pending status. What function call in PA accesses the XCAP server? It seems to me that the RLS accesses the XCAP. Thanks in advance _________________________________________________________________ Buy, Load, Play. The new Sympatico / MSN Music Store works seamlessly with Windows Media Player. Just Click PLAY. http://musicstore.sympatico.msn.ca/content/viewer.aspx?cid=SMS_Sept192006

2 1

[Serusers] Presence / Eyebeam Question
by SER LIST 13 Nov '06

13 Nov '06

I have the following issue: I have two clients (eyebeam softphones). If I modparam(pa, auth, none) then I can see the status of each other. But when modparam(pa, auth, xcap) I cannot see each other's status. I do get a POPUP window on each softphone asking me whether I want to allow the other party to see my status. Even after I say "Allow", I still can't see the status. I am able to write the presence-rules to XCAP server from the eyebeam client. Eyebeam writes the file presrules.xml and rls looks for presence-rules.xml. So I have a softlink between the two files. Do I need to do something to make this work? Thanks _________________________________________________________________ Not only does Windows Live OneCare provide all-in-one PC care to keep your computer protected and well-maintained, but it also makes creating backup files a breeze. Try it today! http://ideas.live.com/programpage.aspx?versionid=b2456790-90e6-4d28-9219-5d…

2 1

[Users] exec module : why not in onreply_route ?
by Jean-François SMIGIELSKI 13 Nov '06

13 Nov '06

Hello, On 11/13/06 Daniel-Constantin Mierla wrote: [...] > basically should work in onreply route as well, I haven't tried it. You > will not have access to transaction's avps, otherwise you can play and > see if you encounter any problem. Just edit the modules/exec/exec_mod.c, > add ONREPLY_ROUTE to exported functions' flags, recompile and reinstall. > If everything is ok, then we can include it in the trunk. [...] That is what I did last week and till now, I did not *yet* meet any problem with that. The exec module is a really convenient way to test various functionnalities without having to write a custom module. Very useful even in a reply block. Regards, JF Smigielski. ________________________________________________________________________ iBELGIQUE, exprimez-vous ! http://web.ibelgique.com/

1 0

[Users] update documentation
by Klaus Darilion 13 Nov '06

13 Nov '06

Hi Daniel,Bogdan! Please update the 1.2.x documentation (http://openser.org/docs/modules/1.2.x/): - add domainpolicy module - add new ENUM module features thanks Klaus -- Klaus Darilion nic.at

2 1

[Users] Errors whie doing openser integration with radius server
by Sanjeev Manoli 13 Nov '06

13 Nov '06

Hi, I am getting following errors as seen in /var/log/message while running openser with radius integration, ***************************************************************************************** Nov 6 20:33:45 lx-dev monit[13565]: 'openser' start: /etc/init.d/openser Nov 6 20:33:45 lx-dev monit[13565]: 'openser' failed to start Nov 6 20:33:45 lx-dev openser: init_tcp: using epoll_lt as the io watch method (auto detected) Nov 6 20:33:45 lx-dev openser: INFO: statistics manager successfully initialized Nov 6 20:33:45 lx-dev openser: StateLess module - initializing Nov 6 20:33:45 lx-dev openser: TM - initializing... Nov 6 20:33:46 lx-dev openser: Maxfwd module- initializing Nov 6 20:33:46 lx-dev openser: AVPops - initializing Nov 6 20:33:46 lx-dev openser: TextOPS - initializing Nov 6 20:33:46 lx-dev openser: ACC - initializing Nov 6 20:33:46 lx-dev openser: AUTH module - initializing Nov 6 20:33:46 lx-dev openser: xl_parse_item: error - bad parameters Nov 6 20:33:46 lx-dev openser: ERROR:avpops:fixup_check_avp: unable to get pseudo-variable in P1 Nov 6 20:33:46 lx-dev openser: ERROR: fix_actions: fixing failed (code=-2) at cfg line 146 Nov 6 20:33:46 lx-dev openser: ERROR: fix_expr : fix_actions error ***************************************************************************************** I am using openser (Version: openser-1.1.0-tls) and radius server ( freeradius-1.1.3) along with radiusclient-ng (radiusclient-ng-0.5.2). I exactly followed the following radius integration documentation from openser web site, http://openser.org/docs/openser-radius-1.0.x.html For your reference I am also attaching the openser.cfg file that I am using. If I remove the radius integration related part from openser.cfg then my openser server starts fine, I have tested it with kphone SIP UA and it works fine. One other question is I get parse error for following 2 statements in openser.cfg (I commented them to make forward progress). Please advice the right syntax to use following modparam statements. modparam("acc", "radius_extra", "Sip-Src-IP=$si;Sip-Src-Port=$sp") modparam("avpops", "avp_aliases", "day=i:101;time=i:102") This is kind of urgent for me and I am clueless at this point so really appreciate all your help. Thanks, - San

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users