sr-users

sr-users@lists.kamailio.org

10 participants
37461 discussions

RE: [Users] Using Openser's CPL module...
by Marvin Ottley 05 Dec '06

05 Dec '06

Good day Bogdan and Nicolas, Thanks for your prompt response. I tried the recommended command: "openserctl fifo LOAD_CPL sip:user@domain /path/his_cpl_file.xml" And the response I received was: "500 command 'LOAD_CPL' not available." I'm using the release version of openser 1.1. Marvin -----Original Message----- From: users-bounces(a)openser.org [mailto:users-bounces@openser.org] On Behalf Of Bogdan-Andrei Iancu Sent: Tuesday, December 05, 2006 5:43 AM To: Nicolas Palix Cc: users(a)openser.org Subject: Re: [Users] Using Openser's CPL module... Hi Nicolas, the DB upload must be done via the proxy because the DB contains not only the CPL script in XML format, but also in a pre-compiled format of it in binary format. This pre-compiling is done at upload time. You can take it as limitation, but you also have full liberty to implement any transport mechanism for the CPL scripts (from user to server) (like CGI and HTTP) - but on server side, the DB storage must be done via openser. regarding the docs - you are right, it is a bug there - the module requires a DB module (that's why db_url is mandatory), but this is not properly documented. I will take care of it. thanks and regards, bogdan Nicolas Palix wrote: >Hi all, > >Is there some limitations ? >What about email tag ? >The documentation does mention anything. > >Futhermore, "db_url" is mandatory but DB module are not mentioned as mandatory >in the "Dependencies" section. > >Regards, > >Le mardi 05 décembre 2006 09:14, Bogdan-Andrei Iancu a écrit : > > >>Hi Marvin, >> >>you have two options to upload a CPL script into DB (both require your >>server up and running) >> >>1) use FIFO/MI command "LOAD_CPL" : >>:LOAD_CPL: >> >>username >>cpl_filename >>( openserctl fifo LOAD_CPL sip:user@domain /path/his_cpl_file.xml ) >> >>2) use the REGISTER request >>http://www.openser.org/docs/modules/1.2.x/cpl-c.html#AEN272 >> >>regards, >>bogdan >> >>Marvin Ottley wrote: >> >> >>>Good day all, >>> >>>I'm trying to use the CPL module and I'm having trouble figuring out >>>how to load the cpl xml script into the cpl database. >>> >>>Thanks for your pointers >>> >>>Marvin >>> >>>------------------------------------------------------------------------ >>> >>>_______________________________________________ >>>Users mailing list >>>Users(a)openser.org >>>http://openser.org/cgi-bin/mailman/listinfo/users >>> >>> >>_______________________________________________ >>Users mailing list >>Users(a)openser.org >>http://openser.org/cgi-bin/mailman/listinfo/users >> >> > > > _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users

2 1

[Users] Couple of usagequestions (trunking/alias, )
by Andreas Sikkema 05 Dec '06

05 Dec '06

Hi, I'm running an OpenSER server and I've got a couple of usage questions I'd like some pointers on how I can implement them. - I want to link multiple incoming telephone numbers to one single account so 123456 and 45678 and 999933 can all point to the account customer1 Basically I want to do SIP trunking, but with requiring the CPE to authenticate itself. How do I do this? - I'm now using an Asterisk server to do some incoming call routing (mainly some call forwarding scenarios) and I'd like to remove the Asterisk dependency. How do I retrieve values based on the called destination from a database? I've tried looking at AVPops, but haven't yet found any clear documentation on how to use it. Thanks! -- Andreas Sikkema

3 7

[Serusers] modify the From header
by Zeeshan Sajid 05 Dec '06

05 Dec '06

Is there any way in which i can rewrite the From header efficiently like i want to change this From header From: "Zeeshan"<sip:shani@localhost.localdomain>;tag=4a6dec6f to From: "Zeeshan"<sip:shani@128.242.111.222:5060>;tag=4a6dec6f how can i do that using subst function ???? please help me thanks in advance regards Zeeshan --------------------------------- Check out the all-new Yahoo! Mail beta - Fire up a more powerful email and get things done faster.

5 4

[Users] Load Balancing
by Thomas Deillon 05 Dec '06

05 Dec '06

Hi all, I try to use SER as a load balancer with the dispatcher module. All SIP/RTP request are load balanced and, in a LAN, it's working. With phone with a public address ip, it's work too. But my problem it's with NATed phones... The ser change the source ip address and so, the nat=yes option in asterisk cannot work!! (I make registration on ser servers) I wanted to change the "from header field" in the ser and put the IP source, but it seams impossible. Do you have an idea for my problem? Thanks a lot, Thomas Deillon

4 4

[Users] qop authentication support
by Klaus Darilion 05 Dec '06

05 Dec '06

Hi! Reading openser's docs about qop, it looks like openser supports qop. turning qop on with www_challenge("", "1") activates the qop parameter: WWW-Authenticate: Digest realm="foo.bar", nonce="457553154ed7b9d93effa4118b4fe21f11b7f887", qop="auth". Openser advertises only qop=auth. Looking at the source code I get the impression that auth-int is supported too. How can this be activated? regards klaus -- Klaus Darilion nic.at

1 2

[Users] Openser Clustering ?
by Jengjr Lee 李正之 05 Dec '06

05 Dec '06

Dear All Guru : Is there any experience about LVS , RHCS (RedHat Cluster Suite) , or OpenSSI working with openser ? Or any other hardware L4 switch with openser ? I have tried LVS with openser , but failed. Thanks for your comments. This message (and any attachments) may contain information that is confidential, proprietary, privileged or otherwise protected by law. The message is intended solely for the named addressee (or a person responsible for delivering it to the addressee). If you are not the intended reciptient of this message, you are not authorized to read, print, retain, copy or disseminate this message or any part of it. If you have received this message in error, please destroy the message or delete it from your system immediately and notify the sender. 本郵件(及任何附件)可能載有機密、專有、具有特權或受法律保護的資料，並僅供收件人(或負責將資料遞交給收件人的人士)使用。如閣下不是本郵件的預定收件人，便無權閱讀、列印、保留、複製或傳佈本郵件或其任何部分。如閣下錯誤地收到本郵件，請立即將之銷毀或從閣下的系統中刪除，並通知寄件人

2 1

[Serusers] About field of subscriber
by chungyu 05 Dec '06

05 Dec '06

Hi: I add a field in subscriber and using the field routing process example: field name:mode format :ture or false if mode is true route[2] else route[3] how can write ser'configuration that call field of subscriber? AVP can do? Thank you! changyu 2006/12/04

1 0

[Users] Installing Openser with Multiple Asterisk
by Naveen 05 Dec '06

05 Dec '06

Hi all, Can some one please point me to the doc's that how to install Openser as Central server and multiple asterisks' are as PSTN gateways. Thanks and regards Naveen

1 0

[Serusers] SER Oracle Support
by Abdul Qadir 05 Dec '06

05 Dec '06

Hi All, We are currently using radius server for authentication. Is it possible to use oracle database with SER without using radius server. We have no problem if need to develop our own module for it, but the concern is whether we still be able to do digest authentication if we take out the radius server. Best Regards, Abdul Qadir --------------------------------- Want to start your own business? Learn how on Yahoo! Small Business.

4 11

[Users] TLS
by Sebastian Murray-Roberts 05 Dec '06

05 Dec '06

Hi, This may seem like a silly question, but I would just like to know if any modifications need to be made to the routing block(s) of openser.cfg to allow calls to be established using TLS? I'm running openser v 1.1.0 and I have just setup TLS. I'm using SIPp to test it and it seems to be working as I can register using a SIPp scenario. However when I try and make a call the invites are challenged and authenticated, but once that is complete the invite is not forwarded to the uas. The uas is registered and listening using TLS. The SIPp scenarios also work perfectly if I don't use TLS. Am I missing anything? Many Thanks Sebastian -- Sebastian Murray-Roberts (B.Sc Hons) Server Developer CeDux Technologies Fax: +27 21 409 7050 Mobile: +27 72 183 5998 CONFIDENTIALITY NOTICE: E-MAIL This e-mail is confidential. If you receive it by mistake, please delete it and notify the sender immediately. If you are not the intended recipient, you may not use, disclose, distribute, copy or publish any information contained herein.

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users