sr-users

sr-users@lists.kamailio.org

40 participants
37453 discussions

[Serusers] OT? Duplicated digits.
by Juan 10 Jan '07

10 Jan '07

My system is DIDprovider ---SER---Cisco AS5350---Calling card platform. Since December the 1st we noticed a large increase in the amount of wrong numbers received at the CC platform. As this problem arrises once the call is established and there is no RTP relay I don't think is a SER question but I resort to your major knowledge to see if someone can enlight me about where to look to solve the problem. BTW. No changes were made in the equipment at neither end. Thanks in advance Juan

2 1

[Serusers] BYE and SER.cfg
by Benito Caracuel 10 Jan '07

10 Jan '07

Hello all, In my ser.cfg I do: route{.... if (method=="BYE"){log(1,"enter in method bye")do ABCD.....} ....} When SER receives a BYE, SER doesn´t do "ABCD...." and if I put SER in debug mode, I can`t read the log "enter in method bye" but I can read the line"method: <BYE>" why doesn`t work "if method="BYE"? Thanks. _________________________________________________________________ Llama a tus amigos de PC a PC: ¡Es GRATIS! http://get.live.com/messenger/overview

3 2

Re: [Serusers] One way audio
by Greger V. Teigre 10 Jan '07

10 Jan '07

You need to look at when NAT is detected (nat_uac_test) for INVITE and for 200 OK in onreply route for the same call. Make sure NAT is detected for both, if not, find out why it is not detected. g-) Gareth Owen wrote: > > Thanks Greger, I've already worked through the getting started doc and > think I've got a good understanding but am still getting the one-way > audio. Can you suggest anything to help me understand how I can track > the problem? Thanks gareth. > > > > ------------------------------------------------------------------------ > > *From:* Greger V. Teigre [mailto:greger@teigre.com] > *Sent:* 04 January 2007 06:5 > *To:* gareth.owen(a)bevoice.net > *Cc:* serusers(a)lists.iptel.org > *Subject:* Re: [Serusers] One way audio > > > > Try gettingstarted doc. http://iptel.org/ser/doc/gettingstarted > g-) > > Gareth Owen wrote: > > Can someone help? > > > > I am fairly new to SER and Mediaproxy and can't find a detailed > explanation of how nathelper etc work, so I'm struggling! > > > > My config is:- > > > > SER 0.9.6 > > Mediaproxy 1.7.2 > > Fedora Core 4 86x64 > > > > SER and Mediaproxy run on the same server which acts as a gateway to a > remote Sonus PSTN gateway over a VPN. > > > > I also use Asterisk on my local network. The SER server acts as a > router between Asterisk servers and the PSTN via the Sonus. This works > fine but my problem is when I attempt to use X-Lite 3.0 UA behind NAT > on a remote network. Asterisk is not used in this config but proves > that two way audio is fine using SER and the Sonus gateway. > > > > Problem: X-Lite behind NAT on remote network to Sonus PSTN gateway via > SER and Mediaproxy, I get only one ay audio. The audio is fine from > X-Lite to PSTN but not in the reverse direction. > > > > Thanks for your help > > ** ** > > ** ** > > ** ** > > ** ** > > > > > > > > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > Serusers mailing list > Serusers(a)lists.iptel.org <mailto:Serusers@lists.iptel.org> > http://lists.iptel.org/mailman/listinfo/serusers >

1 0

[Serusers] Can I see your PSTN with Accounting?
by Bart Fisher 10 Jan '07

10 Jan '07

Noob here, sorry :) I've been working with SER for about a month and I have a working config using what's provided by iptel.org 'getting started' gw-pstn.cfg - But here's were I'm stuck. I'd like to add accounting, but I haven't found a good example based on gw-pstn.cfg where accounting has been added. Google turns up old updated information. I'm hoping someone can post or email their gw-pstn.cfg with acc enabled: Note: Basically the gw-pstn.cfg script provides a good example of using SER with nathelper and mediaproxy as well as rewriting to a PSTN Gateway Can you help me? TIA Bart bart(a)icpage.com

2 1

[Serusers] Question
by Bill 10 Jan '07

10 Jan '07

I am setting up a SER/Mediaproxy/MySQL box. I have it setup and running except for NAT. When I put up a call this is what my session look like. The 127 are the fakeconversations.py. The other session is my live traffic but the other end has all ????????????????. Any ideas. I am using the basic SER/Mediaproxy config below. Caller Via Called Status Duration Codec Type Traffic ---------------------------------------------------------------------------- ---------------------------------------- 127.0.0.1:10000 - 10.0.1.100:60004 - 127.0.0.1:10002 active 0'10" Dynamic(127) Audio 94.38k/188.58k/94.38k 10.0.2.1:15040 - 10.0.1.100:60000 - ?.?.?.?:? inactive 4'41" Dynamic(107) Audio 1.58M/0/0 Total traffic: 120.55kbps/74.61kbps/149.22kbps (in1/in2/out) Session count: 2 Proxy version: 1.8.0 #####################SER.CFG [root@voipproxy1 mediaproxy]# cat /usr/local/etc/ser/ser.cfg # $Id: nat-mediaproxy.cfg 51 2006-01-31 13:28:04Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=7 fork=yes log_stderror=no listen=10.0.1.100 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 sock_mode=0666 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/mediaproxy.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/textops.so" modparam("auth_db|domain|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # INSERT YOUR IP ADDRESS HERE record_route_preset("10.0.1.100:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden"); break; }; if (method=="INVITE") { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); if (client_nat_test("3") || search("^Route:.*;nat=yes")) { setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(4); route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="CANCEL") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(4); route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ######################MEDIAPROXY.INI [Dispatcher] defaultProxy = /var/run/mediaproxy.sock [MediaProxy] ;start = yes ;socket = /var/run/mediaproxy.sock ;group = openser ;listen = None ;allow = None proxyIP = 10.0.1.100 portRange = 60000:65000 ;TOS = 0xb8 ;idleTimeout = 60 ;holdTimeout = 3600 ;forceClose = 0 [Accounting] ; one of none, radius or database accounting = database [Database] user = ser password = heslo host = localhost database = ser table = acc [Radius] secret = secret server = localhost authport = 1812 acctport = 1813 dictionaries = /etc/radiusclient-ng/dictionary, /etc/openser/radius/dictionary, /usr/local/mediaproxy/dictionary retries = 2 timeout = 3 Bill

2 1

[Serusers] ser_ctl
by Jean Sigue 10 Jan '07

10 Jan '07

Hi, After compiling the pre-release 0.10 , I still have the serctl not ser_ctl. How do i fix it Jean R. Sigue Senior Network Engineer CCNP, CSS1, NSA OMX Global Services USA Direct: 1 908-673-6004 Mobile: (917-257-9742) Fax: 1 908-673-6057 Visiting address: 2 Connell Drive Berkeley Heights, NJ 07922 <http://www.omxgroup.com/>www.omxgroup.com No. 1 in marketplace solutions ******************************************************************************** This e-mail and the information it contains may be privileged and/or confidential. It is for the intended addressee(s) only. The unauthorised use, disclosure or copying of this e-mail, or any information it contains, is prohibited. If you are not an intended recipient, please contact the sender and delete the material from your computer. ********************************************************************************

4 4

[Serusers] Error with MTU size in SER with MIPv6
by Jose Angel Calvo 10 Jan '07

10 Jan '07

Thank you for your help and sorry for my English. I have a problem with mipv6 and a server SIP, SER (SIP Express Router). The mipv6 path is "mipv6-2.0.2" from http://www.mobile-ipv6.org/ ,in kernel 2.6.16.24-Ubuntu. The problem occurs when a packet is too big (it must be fragmented), and go to the node what makes function of P-CSCF (Proxy in SIP) and Correspondent Node. If the P-CSCF is not a CN, all is OK. But if the node is CN, then i have the problem. The SER logs are: ############################################################## ................ Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: SER: new INVITE Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: parse_headers: flags=-1 Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: check_via_address(2001:720:1500:1B:FCFD:FF:FE0C:103, [2001:720:1500:1B:FCFD:FF:FE0C:103], 3) Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: ERROR: warning_builder: buffer size exceeded Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: WARNING: warning skipped -- too big Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: WARNING:vqm_resize: resize(0) called Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: DEBUG: reply sent out. buf=0x8106270: SIP/2.0 1..., shmem=0xb5e8b330: SIP/2.0 1 Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: DEBUG: _reply_light: finished Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: DEBUG: mk_proxy: doing DNS lookup... Nov 20 18:28:25 pcscfD /usr/sbin/ser[8051]: check_via_address(2001:720:1500:1B:FCFD:FF:FE0C:103, [2001:720:1500:1B:FCFD:FF:FE0C:103], 3) Nov 20 18:28:25 pcscfD /usr/sbin/ser[8068]: DBG: tcp_main_loop: dead child 2 (shutting down?) Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: child process 8051 exited by a signal 11 Nov 20 18:28:25 pcscfD kernel: [4296472.851000] <0>skb_under_panic: text:c02d2aad len:321 put:14 head:d62cfc00 data:d62cfbea tail:d62cfd2b end:d62cfd80 dev:eth0 Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: core was not generated Nov 20 18:28:25 pcscfD kernel: [4297162.639000] ------------[ cut here ]------------ Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: INFO: terminating due to SIGCHLD Nov 20 18:28:25 pcscfD kernel: [4297162.639000] kernel BUG at net/core/skbuff.c:112! Nov 20 18:28:25 pcscfD /usr/sbin/ser[8059]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8052]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8053]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8054]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8055]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8056]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8057]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8058]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8060]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8061]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8062]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8063]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8064]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8065]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8066]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8067]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8068]: INFO: signal 15 received Nov 20 18:28:25 pcscfD /usr/sbin/ser[8050]: INFO: signal 15 received Nov 20 18:28:25 pcscfD kernel: [4297162.639000] invalid opcode: 0000 [#3] Nov 20 18:28:25 pcscfD /usr/sbin/ser[8059]: Memory status (pkg): Nov 20 18:28:25 pcscfD /usr/sbin/ser[8052]: Memory status (pkg): Nov 20 18:28:25 pcscfD /usr/sbin/ser[8053]: Memory status (pkg): Nov 20 18:28:25 pcscfD /usr/sbin/ser[8054]: Memory status (pkg): Nov 20 18:28:25 pcscfD /usr/sbin/ser[8055]: Memory status (pkg): Nov 20 18:28:25 pcscfD /usr/sbin/ser[8056]: Memory status (pkg): ....................... Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: hash = 2055 fragments no.: 1, unused: 0 ^I^I bucket size: 1048576 - 2097152 (first 1572864) Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: hash = 2059 fragments no.: 1, unused: 0 ^I^I bucket size: 16777216 - 33554432 (first 31934160) Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: TOTAL: 26 free fragments = 33537656 free bytes Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: ----------------------------- Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: shm_mem_destroy Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: destroying the shared memory lock Nov 20 18:28:25 pcscfD /usr/sbin/ser[8049]: terminating due to SIGCHLD ############################################################## The problem is in the MTU size, because if the packet is not fragmented, there is not a problem. But the INVITE packet needs to fragment, what it means, i always have the same problem. My SER version is version: ser 0.9.6 (i386/linux) and it's a vanilla version. The packets is sent over UDP. My questions are: - Have anybody the same o similar problem? - The MTU size is a problem in SER? - Have anybody sent fragmented packets with SER? Thanks for your help. __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes, antivirus y antispam ¡gratis! Regístrate ya - http://correo.yahoo.es

2 1

[Serusers] SER LCR Config
by Arun Kumar 10 Jan '07

10 Jan '07

Hi, I'm trying to configure LCR with ser here is my config file. This config is sending the call to my first gateway but when My first gateway is down its not sending the calls to other gateways. Plese help me to make this working. ------------------------ debug=3 fork=no log_stderror=yes listen=192.168.2.210 # INSERT YOUR IP ADDRESS HERE port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:pass@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" loadmodule "/usr/local/lib/ser/modules/uri.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/domain.so" loadmodule "/usr/local/lib/ser/modules/nathelper.so" loadmodule "/usr/local/lib/ser/modules/avpops.so" loadmodule "/usr/local/lib/ser/modules/textops.so" loadmodule "/usr/local/lib/ser/modules/mediaproxy.so" loadmodule "/usr/local/lib/ser/modules/permissions.so" loadmodule "/usr/local/lib/ser/modules/acc.so" loadmodule "/usr/local/lib/ser/modules/auth_radius.so" loadmodule "/usr/local/lib/ser/modules/lcr.so" modparam("auth_db|permissions|uri_db|usrloc|domain", "db_url", " mysql://ser:pass@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("nathelper", "rtpproxy_disable", 1) modparam("nathelper", "natping_interval", 0) modparam("mediaproxy","natping_interval", 30) modparam("mediaproxy","mediaproxy_socket", "/var/run/mediaproxy.sock") # modparam("mediaproxy","sip_asymmetrics","/usr/local/etc/ser/sip-clients") # modparam("mediaproxy","rtp_asymmetrics","/usr/local/etc/ser/rtp-clients") modparam("usrloc", "db_mode", 2) modparam("registrar", "nat_flag", 6) modparam("rr", "enable_full_lr", 1) modparam("tm", "fr_inv_timer", 120) modparam("tm", "fr_inv_timer_avp", "inv_timeout") modparam("permissions", "db_mode", 1) modparam("permissions", "trusted_table", "trusted") modparam("lcr","db_url", "mysql://ser:pass@localhost/ser") modparam("lcr","gw_table","gw") modparam("lcr","gw_name_column","gw_name") modparam("lcr","ip_addr_column","ip_addr") modparam("lcr","port_column","port") modparam("lcr","grp_id_column","grp_id") modparam("lcr","lcr_table","lcr") modparam("lcr","prefix_column","prefix") modparam("lcr","from_uri_column","from_uri") modparam("lcr","priority_column","priority") modparam("lcr","contact_avp","1401") modparam("lcr","fr_inv_timer_avp","fr_inv_timer_avp") modparam("lcr","fr_inv_timer",90) modparam("lcr","fr_inv_timer_next",60) # ------ Account and Radius modules-------------- modparam("acc", "db_url", "mysql://ser:pass@localhost/ser") modparam("acc","log_level",1) modparam("acc","log_flag",1) modparam("acc", "db_flag", 1) modparam("acc","radius_flag",1) modparam("acc","service_type",15) #modparam("acc","radius_config","/usr/local/etc/radiusclient-ng/radiusclient.conf") route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method=="INVITE" && client_nat_test("3")) { # setflag(1); # INSERT YOUR IP ADDRESS HERE record_route_preset("192.168.2.210:5060;nat=yes"); } else if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Call Tear Down Section # ----------------------------------------------------------------- if (method=="BYE" || method=="CANCEL") { setflag(1); end_media_session(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { if ((method=="INVITE" || method=="REFER") && !has_totag()) { sl_send_reply("403", "Forbidden Cant cross 1st bridge"); break; }; if (method=="INVITE") { if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; if (client_nat_test("3")||search("^Route:.*;nat=yes")){ setflag(6); use_media_proxy(); }; }; route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (!is_uri_host_local()) { if (is_from_local() || allow_trusted()) { sl_send_reply("404", "I am trusted host, "); route(4); route(1); } else { sl_send_reply("403", "Forbidden, I am here"); }; break; }; if (method=="ACK") { setflag(1); route(1); break; } if (method=="CANCEL") { setflag(1); route(1); break; } else if (method=="INVITE") { setflag(1); # sl_send_reply("410", "I am sending your call, "); route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (!is_uri_host_local()) { route(4); route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); if (!t_relay()) { if (method=="INVITE" || method=="ACK") { setflag(1); end_media_session(); }; sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!search("^Contact:[ ]*\*") && client_nat_test("7")) { setflag(6); fix_nated_register(); force_rport(); }; if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (client_nat_test("3")) { setflag(7); force_rport(); fix_nated_contact(); }; if (!allow_trusted()) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); }; route(4); if(!load_gws()){ sl_send_reply("500", "Internal server error, unable to load gateways"); break; } if(!next_gw()){ sl_send_reply("503", "Service not available, no gateways found"); break; }; if (!is_uri_host_local()) { route(4); route(1); break; }; # route(1); } route[4] { # ----------------------------------------------------------------- # NAT Traversal Section # ----------------------------------------------------------------- if (isflagset(6) || isflagset(7)) { if (!isflagset(8)) { setflag(8); use_media_proxy(); }; }; } onreply_route[1] { if ((isflagset(6) || isflagset(7)) && (status=~"(180)|(183)|2[0-9][0-9]")) { if (!search("^Content-Length:[ ]*0")) { use_media_proxy(); }; }; if (client_nat_test("1")) { fix_nated_contact(); }; } ------------------------------- thanks arun

1 0

[Users] uri_radius and radius_does_user_exist() not working
by Toni Heinonen 09 Jan '07

09 Jan '07

Hi, I've been through the OpenSER + RADIUS configuration tutorial many, many times, and it works like a charm, except for the uri_radius module which I can't get to detect user existence with the radius_does_user_exist() function. I'm trying to decide whether to send a 404 or a 480, as such: if (!lookup("location")) { if(radius_does_uri_exist()) { sl_send_reply("480", "User offline"); } else { sl_send_reply("404", "User not found"); }; }; It worked identically with the uri_db module's does_user_exist() function. Now the RADIUS server doesn't seem to understand the Call-Check request. I have a dump here: http://tonih.iki.fi/temp/uri_radius.cap Can anyone guess why OpenSER always gives a 404 even for users that exist, but that are simply offline? The users are currently hand-configured into freeradius's text configuration file users.conf. PS. What have you found to be the best way to authenticate users from a domain? FreeRADIUS using Kerberos 5, LDAP or relaying to a Microsoft RADIUS (IAS) server? -- http://tonih.iki.fi/ ~ http://blogit.helsinki.fi/toni.heinonen/ "The progress of a dynamic civilization depends on the special people who make play out of work. In their all-absorbing passion, they create the variations that, through trial and error, become the sources of progress. They make the discoveries that drive the infinite series." - Virginia Postrel

3 3

[Users] sip register
by sinclair fils 09 Jan '07

09 Jan '07

i am developping one sip dialer using Microsoft RTC in vb6 i want to register in my opnser server put no request of registration are send to my server any help __________________________________________________ Do You Yahoo!? En finir avec le spam? Yahoo! Mail vous offre la meilleure protection possible contre les messages non sollicités http://mail.yahoo.fr Yahoo! Mail

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users