sr-users

sr-users@lists.kamailio.org

19 participants
37530 discussions

[Users] cross nat pinging
by Fatih Cerit 28 Feb '07

28 Feb '07

Hi all I am testing nat pinging. I have a natted UA and 2 opensers with diffrent ips. I decided to ping same nat from 2 opensers. I am going to have ability to increase ping interval from 15 seconds to 30 seconds. But I don't have any idea that cross pinging works or not. Is there any one at there whom tested before or any suggestions?? Thanks Fatih Cerit

2 1

[Serusers] ser usrloc expiration
by Corey 28 Feb '07

28 Feb '07

The command "serctl ul show" displays an 'Expires' entry. I'm wondering: * what is the default expiration value? * where/how does this get set, and is it configurable? Many thanks!

2 1

[Users] TLS between UA and Openser
by Jayesh Nambiar 28 Feb '07

28 Feb '07

Hi everybody, I am trying to achieve TLS setup between the UAs and OpenSER. I am using PAP2 and SPA series for testing. Now the PAP2 does not support TLS transport, is it possible to use TLS setup between OpenSER and PAP2 using DNS-SRV? I tried using DNS-SRV but was not successful. The SPA supports TLS transport. I have generated the priviate key and required certs in the OpenSER. For SPA to work, how do we incorporate the certificate inside the SPA? Or should I get a certificate generated from Linksys and then add it to my CA list in OpenSER? I am not very familiar with the TLS concept but still learning. Thanks in advance. w/regards, Jayesh __________________________________________________________ Yahoo! India Answers: Share what you know. Learn something new http://in.answers.yahoo.com/

1 0

[Users] How do to prefix or pattern based routing
by Chris Heiser 28 Feb '07

28 Feb '07

It's more than possible there's a module or piece of documentation that I've been unable to uncover in my attempts to solve this issue. Basically, I'm looking for a way to do prefix or pattern based routing using a datasource (such as dbtext or a real database). I don't want to have to hack an openser.cnf file for each server I setup. That would just be silly. I've looked at PDT, but 1) it does source domain matching, which I could really care less about, and 2) it's misbehaving or misdocumented, as it won't allow for more than one prefix to be defined for a single source domain. I'd really love to be able to do pattern matches and route that way. But at this point, anything is better than hacking the config file. Any suggestions? --Chris

2 1

[Users] new MediaProxy release 1.8.2
by Adrian Georgescu 27 Feb '07

27 Feb '07

Hello, There is a new MediaProxy release available. To upgrade go to http://mediaproxy.ag-projects.com or download the software directly from: http://mediaproxy.ag-projects.com/mediaproxy-1.8.2.tar.gz Changes from version 1.8.1 to 1.8.2 ----------------------------------- - Added support to setup sessions by either caller or called as the initial INVITE may not contain a SDP body (Jeff Williams <jeffw(a)globaldial.com>) - Added support to update the RTP stream sign-in addresses after re- INVITES (Jeff Williams <jeffw(a)globaldial.com>) Changes from version 1.8.0 to 1.8.1 ----------------------------------- - Added User-Name attribute to the radius accounting Update request (freeradius needs it to be able to proxy the request) This release includes new functionality. Your feedback is appreciated, if you wish to provide it please reply to the mailing lists. Kind regards, Adrian Georgescu

3 8

[Users] web gui for registered openser user
by alper ozbilen 27 Feb '07

27 Feb '07

Dear All, I am new in openser. I have just installed openser on Fedora core 4 and run it. *I need "php user gui" for user to make web-based registeration process. I will able to bult it up but i dont know which mysql table i should you. *My aim is to give service to registered user on my datebase. In order to implement it, which open module should i install ? any help wolud be appreciated Thank a lot with my best regard. Alper Ozbilen _________________________________________________________________ Want a degree but can't afford to quit? Top school degrees online - in as fast as 1 year http://forms.nextag.com/goto.jsp?url=/serv/main/buyer/education.jsp?doSearc…

3 4

[Serusers] ser2 and sems?
by TZieleniewski 27 Feb '07

27 Feb '07

Hi!! I am going to set up the sems-ser configuration. In the mini-sems-ser-howto there is a clue to have separate instance of ser for sems. Will sems 0.10.0 work with the ser ottendorf release?? Bests tomasz

1 0

[Users] install:1.1.x-to-1.2.x
by Daniel-Constantin Mierla 27 Feb '07

27 Feb '07

(started a new thread from a devel discuttion) Everybody is encouraged to update the page below: http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x If you do not know how to explain clear, but you know (feel) something changed from 1.1.x to 1.2.0 in a module or other place, just introduce in bold red a short phrase at the beginning or in module's section. Someone will see later and elaborate it. Cheers, Daniel On 02/27/07 13:01, Andreas Granig wrote: > Thank god there is > http://openser.org/dokuwiki/doku.php/install:1.1.x-to-1.2.x > > Hopefully, all the small changes are documented there (hint: the one > below isn't yet) ;o) > > Cheers, > Andreas > > Bogdan-Andrei Iancu wrote: >> Hi Juha, >> >> yes, there is an impact on the script, but very small. The only >> change is: >> modparam("registrar", "sip_natping_flag", x ) >> goes into >> modparam("nathelper","sipping_bflag",x) >> >> regards, >> bogdan

1 0

[Users] Presence module
by Helmut Kuper 27 Feb '07

27 Feb '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I just configured the presence modul and got some strange output in my shell when my xlite phone trys to subscribe to a non existant user: 0(16615) ERROR: warning_builder: buffer size exceeded 0(16615) WARNING: warning skipped -- too big 0(16615) ERROR: warning_builder: buffer size exceeded 0(16615) WARNING: warning skipped -- too big 0(16615) ERROR: warning_builder: buffer size exceeded 0(16615) WARNING: warning skipped -- too big 0(16615) PRESENCE: get_subs_dialog:The query for subscribtion for [user]= sebastian.bruening%40googlemail.comtalk.v104112f54d0,[domain]= sip0.en.ewetel.de for [event]= presence.winfo returned no result 0(16615) PRESENCE:query_db_notify: Could not get subs_dialog from database 0(16615) PRESENCE:update_subscribtion:Could not send notify for presence.winfo 0(16615) PRESENCE:get_xcap_tree:The query in table xcap for [username]=sebastian.bruening%40googlemail.comtalk.v104112f54d0 , domain=sip0.en.ewetel.de returned no result any ideas what this mean? I use latest version of openser (1.2.0). regards Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFF5D+D4tZeNddg3dwRAiYcAKCt9FJYu/yM6+HW/+QOXlp0XOAPWACfYpFZ 0JbJo+z27a2M1zr8WlEG4G4= =I9/o -----END PGP SIGNATURE-----

2 1

[Users] bug in radiusclient ng for 64b
by Stuart Clark 27 Feb '07

27 Feb '07

Hello, I have a 64bit machine running openser 1.1.0, and wish to log radius accounting details to radius using the acc module and radiusclient-ng. I am facing issues talking to a freeradius server, as described at: https://developer.berlios.de/bugs/?func=detailbug&bug_id=7442&group_id=1208 Basically, the server reports: Error: Received Accounting-Request packet from w.x.y.z with invalid signature! (Shared secret is incorrect.) I have updated to the cvs version of radiusclient-ng, but the problem still exists. It would appear that the md5 routine is not compatible with the md5 routine used by the freeradius software. Just wondering is anyone else has worked their way around this problem. Cheers, Stuart > X-Archived: http://article.gmane.org/gmane.comp.voip.openser.user/4415 > From: Daniel-Constantin Mierla <daniel@...> > Subject: FYI: bug in radiusclient ng for 64b > Newsgroups: gmane.comp.voip.openser.user, gmane.comp.voip.openser.devel > Date: 2006-05-16 01:44:16 GMT (13 weeks, 3 days and 58 minutes ago) > > On 05/16/06 02:48, Maxim Sobolev wrote: >> Hi, >> >> Reportedly there is an problem in radiusclient library with md5 hash >> calculation on 64bit platforms (amd64, sparc64, etc), which results in >> server rejecting requests even with proper secret configured on >> client. I have applied a fix, but don't have access to any 64bit >> hardware, therefore can't verify. >> >> Therefore, if anybody is having problems with radiusclient on 64bit >> arch he is more than welcome to try update to the latest version from >> cvs and let me know if it helps or not. Instructions on checking out >> sources from berlios cvs are here: >> https://developer.berlios.de/cvs/?group_id=1208. >> >> Thanks! >> >> -Maxim >

3 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users