sr-users

sr-users@lists.kamailio.org

23 participants
37535 discussions

[Serusers] About avp_db_store()
by chungyu 02 Apr '07

02 Apr '07

Hi all, I am trying to use avp_db_store() stores my table "contact" with caller uri ex: table name: contact ----------------------------- | username | domain | ----------------------------- | | | ----------------------------- | | | ----------------------------- If (method=="INVITE"){ avp_write("$ruri/username", "s:name"); avp_db_store("$ruri", "s:name/contact"); }; if the incoming call then save username and domain of caller in contact caller: bob(a)iptel.org => ----------------------------- | username | domain | ----------------------------- | bob | iptel.org | ----------------------------- | | | ----------------------------- but not success, system reply ERROR:avpops:db_store: insert faild Please help me in the problem Thanks a lot in advance chungyu

1 0

[Users] Call dropped after 6 ACKs. Branch=0 problem?
by kjcsb 02 Apr '07

02 Apr '07

I have the following scenario: PSTN gateway (202.180.nnn.nnn) -> OpenSER 1.0.1 (147.202.nnn.nnn) -> Asterisk 1.2.16 (203.89.nnn.nnn) When an incoming call is received, the call is established but often (but not always) eventually dropped. In the following dialogue, it can be seen that when the ACK is passed from the gateway on to Asterisk, OpenSER appends a Via with branch=0. After a number of these ACKs are passed on, the call is eventually dropped. It has been suggested by someone on the Asterisk list that "While "branch=0" is valid in RFC 2543, I don't think an INVITE can start-off as RFC 3261 and then the ACK can switch over to RFC 2543 in the middle of the transaction." i.e. the implication is that it's an OpenSER problem. Does that seem right? If so how can it be corrected? If not, could anyone advise what the problem might be or suggest any resolutions? U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 INVITE sip:6499777777@domain.co.nz SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz> Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Max-Forwards: 70 Date: Mon, 02 Apr 2007 02:53:24 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Content-Type: application/sdp Content-Length: 336 v=0 o=root 8802 8802 IN IP4 202.180.nnn.nnn s=session c=IN IP4 202.180.nnn.nnn t=0 0 m=audio 35268 RTP/AVP 18 97 3 0 8 101 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:97 iLBC/8000 a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 100 trying -- your call is important to us Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE Server: OpenSer (1.0.1 (i386/linux)) Content-Length: 0 Warning: 392 147.202.nnn.nnn:5060 "Noisy feedback tells: pid=29716 req_src_ip=202.180.nnn.nnn req_src_port=5060 in_uri=sip:6499777777@domain.co.nz out_uri=sip:6499777777@203.89.nnn.nnn via_cnt==1" U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 INVITE sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz> Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Max-Forwards: 69 Date: Mon, 02 Apr 2007 02:53:24 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Content-Type: application/sdp Content-Length: 336 v=0 o=root 8802 8802 IN IP4 202.180.nnn.nnn s=session c=IN IP4 202.180.nnn.nnn t=0 0 m=audio 35268 RTP/AVP 18 97 3 0 8 101 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:97 iLBC/8000 a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 INVITE sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz> Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Max-Forwards: 69 Date: Mon, 02 Apr 2007 02:53:24 GMT Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Content-Type: application/sdp Content-Length: 336 v=0 o=root 8802 8802 IN IP4 202.180.nnn.nnn s=session c=IN IP4 202.180.nnn.nnn t=0 0 m=audio 35268 RTP/AVP 18 97 3 0 8 101 a=rtpmap:18 G729/8000 a=fmtp:18 annexb=no a=rtpmap:97 iLBC/8000 a=rtpmap:3 GSM/8000 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 100 Trying Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16301 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16301 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK013cd54d;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK013cd54d;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK54b95a19;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK54b95a19;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK46a352b9;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK46a352b9;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK2da46c51;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK2da46c51;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK23a5accc;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK23a5accc;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK153c7273;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK153c7273;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK01e676a5;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK01e676a5;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKd5ab.736d6085.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 200 OK Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0b505d2b;rport=5060 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 INVITE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Contact: <sip:6499777777@203.89.nnn.nnn> Content-Type: application/sdp Content-Length: 244 v=0 o=root 16300 16300 IN IP4 203.89.nnn.nnn s=session c=IN IP4 203.89.nnn.nnn t=0 0 m=audio 19952 RTP/AVP 0 8 101 a=rtpmap:0 PCMU/8000 a=rtpmap:8 PCMA/8000 a=rtpmap:101 telephone-event/8000 a=fmtp:101 0-16 a=silenceSupp:off - - - - U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0a0ddae8;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 ACK sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK0a0ddae8;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 102 ACK User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 202.180.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 BYE sip:6499777777@203.89.nnn.nnn SIP/2.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK12646817;rport Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 103 BYE User-Agent: Asterisk PBX Max-Forwards: 70 Content-Length: 0 U 147.202.nnn.nnn:5060 -> 203.89.nnn.nnn:5060 BYE sip:6499777777@203.89.nnn.nnn SIP/2.0 Record-Route: <sip:147.202.nnn.nnn;ftag=as3f0f7d93;lr=on> Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKe5ab.311dd295.0 Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK12646817;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Contact: <sip:6494444444@202.180.nnn.nnn> Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 103 BYE User-Agent: Asterisk PBX Max-Forwards: 69 Content-Length: 0 U 203.89.nnn.nnn:5060 -> 147.202.nnn.nnn:5060 SIP/2.0 481 Call leg/transaction does not exist Via: SIP/2.0/UDP 147.202.nnn.nnn;branch=z9hG4bKe5ab.311dd295.0;received=147.202.nnn.nnn Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK12646817;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 103 BYE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Content-Length: 0 U 147.202.nnn.nnn:5060 -> 202.180.nnn.nnn:5060 SIP/2.0 481 Call leg/transaction does not exist Via: SIP/2.0/UDP 202.180.nnn.nnn:5060;branch=z9hG4bK12646817;rport=5060 From: "6494444444" <sip:6494444444@202.180.nnn.nnn>;tag=as3f0f7d93 To: <sip:6499777777@domain.co.nz>;tag=as060f43a9 Call-ID: 2f573abd3cd80bd369495e322ec5ab4a(a)202.180.nnn.nnn CSeq: 103 BYE User-Agent: Asterisk PBX Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY Content-Length: 0 Thanks Cameron

1 0

[Serusers] Unreacheable destination problems
by Amanda Mattiuz 01 Apr '07

01 Apr '07

Hello! I'm using SER + rtpproxy, but altough the NAT problem seems to be solved, I get no audio ... analysing the traffic with ethereal, I realized that the traffic going from the proxy to the UAs never arrives (ICMP unreacheable destination)... I assume it is because the users have their ports blocked, is that correct? I changed the rtpproxy port range (PORT_MIN and PORT_MAX ) to lower ports, but still I got the same messages... Does anybody knows anything that can be done by me in terms of configurations of the rtpproxy or ser.cfg or whatever, given the fact that I don't have power to open the ports??..... Thanks, Amanda -- ------------------------------------------------------------------- Amanda Remes Mattiuz amattiuz(a)gmail.com

1 0

[Users] Re: Digest Authentication Problem with header parsing problem
by Abdurrahman Sahin 01 Apr '07

01 Apr '07

hi all; i solved my problem; i was setting my server's ip address as the realm, and i guess providing an ip address as the realm causes problem. so i changed the realm name to a domain name , then set a sip proxy address for the client i also changed SIP_DOMAIN to a domain name. ----- Original Message ----- From: Abdurrahman Sahin To: users(a)openser.org Sent: Sunday, April 01, 2007 3:00 PM Subject: Digest Authentication Problem with header parsing problem hi all; i'm trying to activate digest authentication with mysql, but i see a strange parsing error in the logs. here is my logser log ================== Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: New request - M=REGISTER RURI=sip:server_public_ip_address F=<null> T=sip:apo@server_public_ip_address IP=ua_public_ip_address ID=NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY. Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: DEBUG:maxfwd:is_maxfwd_present: value = 70 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=200 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: get_hdr_field: cseq <CSeq>: <1> <REGISTER> Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: DEBUG: get_hdr_body : content_length=0 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: found end of header Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: find_first_route: No Route headers found Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: loose_route: There is no Route HF Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=ffffffffffffffff Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: check_via_address(ua_public_ip_address, ua_public_ip_address, 0) Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=4000 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: pre_auth(): Credentials with given realm not found ] in status 6: <<"apo"<sip:apo@ua_public_ip_address;tag=5d692f7d>> . R: parse_to : unexpected char [ Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: ERROR:parse_from_header: bad from header Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: set_err_info: ec: 1, el: 3, ei: 'error parsing From' Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: xl_get_from_attr: ERROR cannot parse FROM header Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: Register authentication failed - M=REGISTER RURI=sip:server_public_ip_address F=<null> T=sip:apo@server_public_ip_address IP=ua_public_ip_address ID=NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY. Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: build_auth_hf(): 'WWW-Authenticate: Digest realm="server_public_ip_address", nonce ' 60f8cf5a7a5eb40c26f914280272b51f58caaa7" Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=ffffffffffffffff Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: check_via_address(ua_public_ip_address, ua_public_ip_address, 0) Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: DEBUG:destroy_avp_list: destroying list (nil) Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: receive_msg: cleaning up and sip msg received at the server side ============================== U ua_public_ip_address:28443 -> 192.168.200.2:5060 REGISTER sip:server_public_ip_address SIP/2.0. Via: SIP/2.0/UDP ua_public_ip_address:28443;branch=z9hG4bK-d87543-08523511e5151c18-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:apo@ua_public_ip_address:28443;rinstance=1ff3024a97431241>. To: "apo"<sip:apo@server_public_ip_address>. From: "apo"<sip:apo@ua_public_ip_address;tag=5d692f7d. Call-ID: NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY.. CSeq: 1 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. User-Agent: X-Lite release 1006e stamp 34025. Content-Length: 0. . # U 192.168.200.2:5060 -> ua_public_ip_address:28443 SIP/2.0 100 Trying. Via: SIP/2.0/UDP ua_public_ip_address:28443;branch=z9hG4bK-d87543-08523511e5151c18-1--d87543-;rport=28443. To: "apo"<sip:apo@server_public_ip_address>. From: "apo"<sip:apo@ua_public_ip_address;tag=5d692f7d. Call-ID: NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY.. CSeq: 1 REGISTER. Server: OpenSER (1.2.0-notls (x86_64/linux)). Content-Length: 0. . # U 192.168.200.2:5060 -> ua_public_ip_address:28443 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP ua_public_ip_address:28443;branch=z9hG4bK-d87543-08523511e5151c18-1--d87543-;rport=28443. To: "apo"<sip:apo@server_public_ip_address>;tag=329cfeaa6ded039da25ff8cbb8668bd2.4f01. From: "apo"<sip:apo@ua_public_ip_address;tag=5d692f7d. Call-ID: NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY.. CSeq: 1 REGISTER. WWW-Authenticate: Digest realm="server_public_ip_address", nonce="460f8cf5a7a5eb40c26f914280272b51f58caaa7". Server: OpenSER (1.2.0-notls (x86_64/linux)). Content-Length: 0. openser.cfg file register section ======================================= # Request route 'base-route-register' ######################################################################## route[2] { sl_send_reply("100", "Trying"); if(!www_authorize("server_public_ip_address", "subscriber")) { xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); www_challenge("server_public_ip_address", "0"); exit; } if(!check_to()) { xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { fix_nated_register(); setbflag(6); } if(!save("location")) { xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_reply_error(); exit; } xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; }

1 0

[Users] Digest Authentication Problem with header parsing problem
by Abdurrahman Sahin 01 Apr '07

01 Apr '07

hi all; i'm trying to activate digest authentication with mysql, but i see a strange parsing error in the logs. here is my logser log ================== Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: New request - M=REGISTER RURI=sip:server_public_ip_address F=<null> T=sip:apo@server_public_ip_address IP=ua_public_ip_address ID=NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY. Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: DEBUG:maxfwd:is_maxfwd_present: value = 70 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=200 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: get_hdr_field: cseq <CSeq>: <1> <REGISTER> Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: DEBUG: get_hdr_body : content_length=0 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: found end of header Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: find_first_route: No Route headers found Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: loose_route: There is no Route HF Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=ffffffffffffffff Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: check_via_address(ua_public_ip_address, ua_public_ip_address, 0) Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=4000 Apr 1 13:39:04 testsrv200 /usr/local/sbin/openser[577]: pre_auth(): Credentials with given realm not found ] in status 6: <<"apo"<sip:apo@ua_public_ip_address;tag=5d692f7d>> . R: parse_to : unexpected char [ Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: ERROR:parse_from_header: bad from header Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: set_err_info: ec: 1, el: 3, ei: 'error parsing From' Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: xl_get_from_attr: ERROR cannot parse FROM header Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: Register authentication failed - M=REGISTER RURI=sip:server_public_ip_address F=<null> T=sip:apo@server_public_ip_address IP=ua_public_ip_address ID=NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY. Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: build_auth_hf(): 'WWW-Authenticate: Digest realm="server_public_ip_address", nonce ' 60f8cf5a7a5eb40c26f914280272b51f58caaa7" Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: parse_headers: flags=ffffffffffffffff Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: check_via_address(ua_public_ip_address, ua_public_ip_address, 0) Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: DEBUG:destroy_avp_list: destroying list (nil) Apr 1 13:39:05 testsrv200 /usr/local/sbin/openser[577]: receive_msg: cleaning up and sip msg received at the server side ============================== U ua_public_ip_address:28443 -> 192.168.200.2:5060 REGISTER sip:server_public_ip_address SIP/2.0. Via: SIP/2.0/UDP ua_public_ip_address:28443;branch=z9hG4bK-d87543-08523511e5151c18-1--d87543-;rport. Max-Forwards: 70. Contact: <sip:apo@ua_public_ip_address:28443;rinstance=1ff3024a97431241>. To: "apo"<sip:apo@server_public_ip_address>. From: "apo"<sip:apo@ua_public_ip_address;tag=5d692f7d. Call-ID: NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY.. CSeq: 1 REGISTER. Expires: 3600. Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO. User-Agent: X-Lite release 1006e stamp 34025. Content-Length: 0. . # U 192.168.200.2:5060 -> ua_public_ip_address:28443 SIP/2.0 100 Trying. Via: SIP/2.0/UDP ua_public_ip_address:28443;branch=z9hG4bK-d87543-08523511e5151c18-1--d87543-;rport=28443. To: "apo"<sip:apo@server_public_ip_address>. From: "apo"<sip:apo@ua_public_ip_address;tag=5d692f7d. Call-ID: NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY.. CSeq: 1 REGISTER. Server: OpenSER (1.2.0-notls (x86_64/linux)). Content-Length: 0. . # U 192.168.200.2:5060 -> ua_public_ip_address:28443 SIP/2.0 401 Unauthorized. Via: SIP/2.0/UDP ua_public_ip_address:28443;branch=z9hG4bK-d87543-08523511e5151c18-1--d87543-;rport=28443. To: "apo"<sip:apo@server_public_ip_address>;tag=329cfeaa6ded039da25ff8cbb8668bd2.4f01. From: "apo"<sip:apo@ua_public_ip_address;tag=5d692f7d. Call-ID: NWYyZGNjMWRjYjFlNTk5YjlhMjE5ODA4MWQ0ZGFiNTY.. CSeq: 1 REGISTER. WWW-Authenticate: Digest realm="server_public_ip_address", nonce="460f8cf5a7a5eb40c26f914280272b51f58caaa7". Server: OpenSER (1.2.0-notls (x86_64/linux)). Content-Length: 0. openser.cfg file register section ======================================= # Request route 'base-route-register' ######################################################################## route[2] { sl_send_reply("100", "Trying"); if(!www_authorize("server_public_ip_address", "subscriber")) { xlog("L_INFO", "Register authentication failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); www_challenge("server_public_ip_address", "0"); exit; } if(!check_to()) { xlog("L_INFO", "Spoofed To-URI detected - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_send_reply("403", "Spoofed To-URI Detected"); exit; } consume_credentials(); if(!search("^Contact:[ ]*\*") && nat_uac_test("19")) { fix_nated_register(); setbflag(6); } if(!save("location")) { xlog("L_ERR", "Saving contact failed - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); sl_reply_error(); exit; } xlog("L_INFO", "Registration successful - M=$rm RURI=$ru F=$fu T=$tu IP=$si ID=$ci\n"); exit; }

1 0

[Users] UA simulator
by Michel Bensoussan 01 Apr '07

01 Apr '07

Hello This question is for openser developers. How do you test your code? Is there a UA simulator to generate many SIP messages and tests different scenarios? Thanks and regards, Michel.

2 1

[Users] how to handle REFER 302-moved temporarily
by zm23 31 Mar '07

31 Mar '07

Hello All, I am trying to find out the proper/best way to handle REFERs coming from phone. My setup is as follows: Cisco gw openser phone gw 2 DID 1234 -----> Invite -----------------> --------------------> <----- 302 refer <--------------------- <--------------------302 moved.... new #5678 sent back After receiving new invite, openser sends it out to another gateway 5678 ----> invite ----------------------> ---------------------------------------------------> yet i am still seeing the 302 messages sent back from proxy to cisco gw. <------------------------------- -- 302 moved Call does connect to 5678 but is dropped after few seconds with only one way audio. What needs to be done so that when second invite hits proxy, there are no more 302s sent back? Should I process the 302 in proxy itself? What is the best way to make the 2nd call to 5678 so that it can be identified as a separate call? Thank you in advance for your help in this regards. -- Zahid

2 3

[Users] bad user name/uid number: -u openser
by Abdurrahman Sahin 31 Mar '07

31 Mar '07

hi all; i just received "bad user name/uid number: -u openser" error msg when i try to start openser server, after installing openser database on mysql and using openser.cfg generator scpript at sipwise.com /rtpproxy section any help about this msg is appreciated.

2 1

Re: [Users] Re: openser behind nat UAs behind NAT
by Abdurrahman Sahin 31 Mar '07

31 Mar '07

hi; when i use a stun server i can register my UAs , but i didnt like this method, i think i should be able to do it without a stun server at first, i see nathelper Module in the documentatios. is there somebody to show how to use nathelper module? ----- Original Message ----- From: raviprakash sunkara To: asahin Sent: Saturday, March 31, 2007 7:25 AM Subject: Re: [Users] Re: openser behind nat UAs behind NAT Hi Asahin, When U with OpenSER Behind NAT, I need to know that is OpenSER is Behind the NAT, which having the Firewall router/NAT. Is the OpenSER is private IP or Public IP (ISP) if the OpenSER is Having the Private IP, of that IP is should forwards the SIP port and RTP ports, and in openserclt, SIP Domain is the public ip. alias should be the Sip domain name In Register Section if!www_authorize("alias name or realm", " subscriber" ) On 3/31/07, asahin <abdsahin(a)gmail.com> wrote: hi all; i am now able to register my client with the openserver server. i used STUN server option of x-lite and stun.voipuser.org as the stun server i also set/exported SIP_DOMAIN variable to my public openser server ip address. i wonder do i have to use a stun server ? ----- Original Message ----- From: asahin To: users(a)openser.org Sent: Friday, March 30, 2007 10:26 PM Subject: openser behind nat UAs behind NAT hi; i installed and tested openser on the internal network, it was working. i tried to test it behind NAT with x-lite sip client, but it failed. i defined a port mapping on the adsl modem for udp/tcp 5060 ports to forward the packets to the openser installed machine. when i try to register to openser i received a 408 request timeout message. i guess its due to external ip of the openser server. i think i should define external ip of the modem to the openser as if it's its own ip, but dont where to define it. here is the ngrep dump at the server. U external_ip_of_ua:23975 -> 192.168.200.2:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport..Max-Forwards: 70..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call-ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER.. Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0....#U 192.168.200.2:5060 -> external_ip_of_openser:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP 192.168.200.2;branch=z9hG4bKd734.53940821.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport=23975..Max-Forwards: 69..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call- ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER..Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, B YE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0..P-hint: out bound.... my openser.cfg file is the initial openser openser.cfg file i didnt change it. ------------- # # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # simple quick-start config script # Please refer to the Core CookBook at http://www.openser.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes # port=5060 # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib64/openser/modules/" # Uncomment this if you want to use SQL database #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "auth.so" #loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } _______________________________________________ Users mailing list Users(a)openser.org http://openser.org/cgi-bin/mailman/listinfo/users -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 www.hyperion-tech.com Client and Parent company :- www.august-networks.com

2 1

[Users] Re: openser behind nat UAs behind NAT
by asahin 30 Mar '07

30 Mar '07

hi all; i am now able to register my client with the openserver server. i used STUN server option of x-lite and stun.voipuser.org as the stun server i also set/exported SIP_DOMAIN variable to my public openser server ip address. i wonder do i have to use a stun server ? ----- Original Message ----- From: asahin To: users(a)openser.org Sent: Friday, March 30, 2007 10:26 PM Subject: openser behind nat UAs behind NAT hi; i installed and tested openser on the internal network, it was working. i tried to test it behind NAT with x-lite sip client, but it failed. i defined a port mapping on the adsl modem for udp/tcp 5060 ports to forward the packets to the openser installed machine. when i try to register to openser i received a 408 request timeout message. i guess its due to external ip of the openser server. i think i should define external ip of the modem to the openser as if it's its own ip, but dont where to define it. here is the ngrep dump at the server. U external_ip_of_ua:23975 -> 192.168.200.2:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport..Max-Forwards: 70..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call-ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER.. Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0....#U 192.168.200.2:5060 -> external_ip_of_openser:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP 192.168.200.2;branch=z9hG4bKd734.53940821.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport=23975..Max-Forwards: 69..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call- ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER..Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, B YE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0..P-hint: out bound.... my openser.cfg file is the initial openser openser.cfg file i didnt change it. ------------- # # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # simple quick-start config script # Please refer to the Core CookBook at http://www.openser.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes # port=5060 # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib64/openser/modules/" # Uncomment this if you want to use SQL database #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "auth.so" #loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users