sr-users

sr-users@lists.kamailio.org

35 participants
37544 discussions

06 Apr '07

Does anyone know how I can get hold of the o_uri ( outgoing uri ) for accounting in openser 1.2? I thought it might be destination uri but that didn't work. Thanks Tim

2 3

[Users] cancels not going through
by Vadim Berezniker 06 Apr '07

06 Apr '07

A number is dialed on a phone and the INVITE goes: PHONE => ASTERISK => SER => PHONE If the other phone doesn't pickup and the calling phone is hung up, it sends a BYE to Asterisk. Asterisk sends a CANCEL to SER. SER cancels its transaction but it doesn't relay the CANCEL to the phone so it keeps ringing. Am I missing something here?

2 3

Re: [Users] proxy-authenticate causes phone to drop authenticate creds
by Daniel-Constantin Mierla 06 Apr '07

06 Apr '07

Try to run asterisk in ddebug mode, and watch debug messages, maybe you get some hints why it considers as coming from phone and not from openser. Cheers, Daniel On 04/05/07 18:00, Mark Price wrote: > Daniel, > I tried that. > I think that asterisk still sees the request as coming from the phone > instead of from openser. Is there possibly something I'm doing wrong? > Is there something I probably need to do extra? > > Here is my openser.cfg: >

1 0

Re: [Users] Presence: nothing to retr ansmit ???
by Daniel-Constantin Mierla 06 Apr '07

06 Apr '07

Hello, can you capture and send the network trace for such case (using ngrep or wireshark)? Cheers, Daniel On 04/06/07 04:28, Eddie wrote: > Hi Daniel, > Thank you very much for your advise. > I captured packets by ethereal, but there is no reply for the first > PUBLISH message. > To implement PUBLISH module, I just followed the README in > /openser..../modules/presence > Is there anything else shoule be considerd? > Thanks so much! > Brs, > Eddie > > 在2007-04-05，"Daniel-Constantin Mierla" <daniel(a)voice-system.ro> 写道： > > Hello, > > seems that this is a retransmission of PUBLISH. Check the log above the > pasted messages. There should be the messages of processing the initial > PUBLISH. Check there to see if the reply was sent (you can use > ngrep/wireshark to watch the SIP traffic, therefore, you can see wheter > reply is sent or not). > > Cheers, > Daniel > > > On 04/03/07 10:58, Eddie wrote: > > Hi all, > > I am a new to openser. I am using openser-1.2.0-notls. I met a issue > > when I setup a presence server. > > I use a UDP testing tool to send PUBLISH message : > > PUBLISH sip:111@sip.comverse.com <mailto:111@sip.comverse.com> SIP/2.0 > > To: <sip:111@sip.comverse.com <mailto:111@sip.comverse.com>> > > From: <sip:111@sip.comverse.com <mailto:111@sip.comverse.com>>;tag=aa0e9e60 > > Via: SIP/2.0/UDP > > 172.19.1.190:5060;branch=z9hG4bK-d87543-4f7005092661b51b-1--d87543-;rport > > Call-ID: dd2288324976454c@UG9ja2V0X1BD > > <mailto:dd2288324976454c@UG9ja2V0X1BD> > > CSeq: 4444 PUBLISH > > Contact: <sip:111@172.19.1.190 <mailto:111@172.19.1.190>:5060> > > Expires: 3600 > > Max-Forwards: 70 > > Content-Type: application/pidf+xml > > Event: presence > > Content-Length: 549 > > <?xml version="1.0" encoding="UTF-8" ?> > > <presence xmlns="urn:ietf:params:xml:ns:pidf" > > xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid" > > xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model" > > xmlns:op="urn:oma:params:xml:ns:pidf:oma-pres" > > xmlns:xsi="http://www.w3.org/2001/XMLSchema-instan > > <tuple id="t0001"> > > <status> > > <basic>open</basic> > > </status> > > <op:overriding-willingness> > > <op:basic>open</op:basic> > > </op:overriding-willingness> > > </tuple> > > </presence> > > but no 200 OK return back from the server. and I set debug level to 7, > > the log is as followed: > > 4(5485) method: <PUBLISH> > > 4(5485) uri: <sip:111@sip.comverse.com <mailto:111@sip.comverse.com>> > > 4(5485) version: <SIP/2.0> > > 4(5485) parse_headers: flags=2 > > 4(5485) DEBUG:parse_to:end of header reached, state=10 > > 4(5485) DBUG:parse_to: display={}, ruri={sip:111@sip.comverse.com <mailto:111@sip.comverse.com>} > > 4(5485) DEBUG: get_hdr_field: <To> [28]; uri=[sip:111@sip.comverse.com <mailto:111@sip.comverse.com>] > > 4(5485) DEBUG: to body [<sip:111@sip.comverse.com <mailto:111@sip.comverse.com>> > > > > 4(5485) Found param type 232, <branch> = > > <z9hG4bK-d87543-4f7005092661b51b-1--d87543->; state=6 > > 4(5485) Found param type 235, <rport> = <n/a>; state=17 > > 4(5485) end of header reached, state=5 > > 4(5485) parse_headers: Via found, flags=2 > > 4(5485) parse_headers: this is the first via > > 4(5485) After parse_msg... > > 4(5485) preparing to run routing scripts... > > 4(5485) parse_headers: flags=100 > > 4(5485) get_hdr_field: cseq <CSeq>: <4445> <PUBLISH> > > 4(5485) DEBUG:maxfwd:is_maxfwd_present: value = 70 > > 4(5485) DEBUG: add_param: tag=aa0e9e60 > > 4(5485) DEBUG:parse_to:end of header reached, state=29 > > 4(5485) DBUG:parse_to: display={}, ruri={sip:111@sip.comverse.com <mailto:111@sip.comverse.com>} > > 4(5485) parse_headers: flags=200 > > 4(5485) DEBUG: get_hdr_body : content_length=549 > > 4(5485) found end of header > > 4(5485) find_first_route: No Route headers found > > 4(5485) loose_route: There is no Route HF > > 4(5485) grep_sock_info - checking if host==us: 16==12 && > > [sip.comverse.com] == [172.19.1.170] > > 4(5485) grep_sock_info - checking if port 5060 matches port 5060 > > 4(5485) grep_sock_info - checking if host==us: 16==12 && > > [sip.comverse.com] == [172.19.1.170] > > 4(5485) grep_sock_info - checking if port 5060 matches port 5060 > > 4(5485) DEBUG: t_newtran: T on entrance=0xffffffff > > 4(5485) parse_headers: flags=ffffffffffffffff > > 4(5485) parse_headers: flags=78 > > 4(5485) t_lookup_request: start searching: hash=29736, isACK=0 > > 4(5485) DEBUG: RFC3261 transaction matched, > > tid=-d87543-4f7005092661b51b-1--d87543- > > 4(5485) DEBUG:tm:REF_UNSAFE: after is 1 > > 4(5485) DEBUG: t_lookup_request: transaction found (T=0xb6148f48) > > 4(5485) DEBUG:tm:t_retransmit_reply: nothing to retransmit > > 4(5485) DEBUG:tm:UNREF_UNSAFE: after is 0 > > 4(5485) DEBUG:destroy_avp_list: destroying list (nil) > > 4(5485) receive_msg: cleaning up > > 5(5488) PRESENCE: msg_watchers_clean:cleaning pending subscriptions > > 5(5488) PRESENCE: msg_active_watchers_clean:cleaning expired watcher > > information > > 5(5488) PRESENCE:msg_presentity_clean:cleaning expired presentity > > information > > I am confused about the issue, and I am not sure whether it is caused > > by configuration files or mysql database. > > Please help me. Thanks so much ! > > Brs, > > Eddie > > > > > > ------------------------------------------------------------------------ > > 每天上班第一件要做的事情是？马上看看>> <http://www.126.com/> > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Users mailing list > > Users(a)openser.org <mailto:Users@openser.org> > > http://openser.org/cgi-bin/mailman/listinfo/users > > > > > > > ------------------------------------------------------------------------ > 每天上班第一件要做的事情是？马上看看>> <http://www.126.com/>

1 0

[Users] Help wanted
by Flavio Goncalves 06 Apr '07

06 Apr '07

Dear coleagues, I need help to translate an OpenSER eBook (building a SIP provider) from portuguese to english. I'm willing paying US$75,00 (paypal) per chapter. If any of you have interest, please contact me at flavio(a)asteriskguide.com Regards, Flavio E. Goncalves

1 0

[Serusers] Can SER do it? Extract info
by Gustavo Passos Tourinho 05 Apr '07

05 Apr '07

Hi There. Can SER extract info from request uri? For example, If I have this uri: INVITE sip:123456#0159559432@my.sip.domain How can I get data before "#" (123456)? I dont want to "strip" this information, just want to get it for further utilization. Is that possible? If it can be done, can be done using variable number of digits? For example: INVITE sip:123#0159559432@my.sip.domain INVITE sip:1234567#0159559432@my.sip.domain Thanks in advanced. Regards, Gustavo

2 1

[Serusers] support to implemente multi leg call radius accounting
by Rosario Pingaro 05 Apr '07

05 Apr '07

We are looking to find support to implement multi leg call accounting in our 0.9.6 ser configuration. We use radius accounting. Any consultant interested supporting us may submit a quotation to this email. Reagrds Rosario

1 0

[Users] t_relay() has no effect !
by JP Ramoul 05 Apr '07

05 Apr '07

2 1

[Serusers] uninstall
by Tuan Nguyen 05 Apr '07

05 Apr '07

Hi everybody, I have installed ser-0.9.6 and now i want to uninstall it to new install in correctly way because it works not property. how can i complete uninstall old version. thanks in advance T.

2 1

Re: [Serusers] error by ser-2.1
by Ladislav Andel 05 Apr '07

05 Apr '07

Here is the answer: http://lists.iptel.org/pipermail/serusers/2007-April/032657.html or http://lists.iptel.org/pipermail/serusers/2007-April/032655.html You need to download stable or earlier version of SER 2.1 because of temporary broken database API. Lada Tuan Nguyen wrote: > Hi Andel, > > I do not see anywhere say that "2 posts before question". > > I am newbie by SER, I have many problem to try to run it, how can > solve this problem without question? and what is "Support for users of > the SIP Express Router" in http://lists.iptel.org/mailman/listinfo/ ? > > Please tell me what should i do to solve my problem when i don`t find > answer in archive? > thanks, > T. > On 4/5/07, *Ladislav Andel* <ladaan(a)iptel.org > <mailto:ladaan@iptel.org>> wrote: > > Hi, > Have you been reading the serusers mailing list ? > Just 2 posts before your question you will find the answer. > > It is for everybody. Read and search the list before asking. > > Peace :), > Lada > > >

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users