sr-users

sr-users@lists.kamailio.org

4 participants
37456 discussions

[Users] Re: openser behind nat UAs behind NAT
by asahin 30 Mar '07

30 Mar '07

hi all; i am now able to register my client with the openserver server. i used STUN server option of x-lite and stun.voipuser.org as the stun server i also set/exported SIP_DOMAIN variable to my public openser server ip address. i wonder do i have to use a stun server ? ----- Original Message ----- From: asahin To: users(a)openser.org Sent: Friday, March 30, 2007 10:26 PM Subject: openser behind nat UAs behind NAT hi; i installed and tested openser on the internal network, it was working. i tried to test it behind NAT with x-lite sip client, but it failed. i defined a port mapping on the adsl modem for udp/tcp 5060 ports to forward the packets to the openser installed machine. when i try to register to openser i received a 408 request timeout message. i guess its due to external ip of the openser server. i think i should define external ip of the modem to the openser as if it's its own ip, but dont where to define it. here is the ngrep dump at the server. U external_ip_of_ua:23975 -> 192.168.200.2:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport..Max-Forwards: 70..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call-ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER.. Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0....#U 192.168.200.2:5060 -> external_ip_of_openser:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP 192.168.200.2;branch=z9hG4bKd734.53940821.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport=23975..Max-Forwards: 69..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call- ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER..Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, B YE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0..P-hint: out bound.... my openser.cfg file is the initial openser openser.cfg file i didnt change it. ------------- # # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # simple quick-start config script # Please refer to the Core CookBook at http://www.openser.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes # port=5060 # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib64/openser/modules/" # Uncomment this if you want to use SQL database #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "auth.so" #loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

1 0

[Users] openser behind nat UAs behind NAT
by asahin 30 Mar '07

30 Mar '07

hi; i installed and tested openser on the internal network, it was working. i tried to test it behind NAT with x-lite sip client, but it failed. i defined a port mapping on the adsl modem for udp/tcp 5060 ports to forward the packets to the openser installed machine. when i try to register to openser i received a 408 request timeout message. i guess its due to external ip of the openser server. i think i should define external ip of the modem to the openser as if it's its own ip, but dont where to define it. here is the ngrep dump at the server. U external_ip_of_ua:23975 -> 192.168.200.2:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport..Max-Forwards: 70..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call-ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER.. Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0....#U 192.168.200.2:5060 -> external_ip_of_openser:5060 REGISTER sip:external_ip_of_openser SIP/2.0..Via: SIP/2.0/UDP 192.168.200.2;branch=z9hG4bKd734.53940821.0..Via: SIP/2.0/UDP external_ip_of_ua:23975;branch=z9hG4bK-d87543-307c62021a71bf6d-1--d87543-;rport=23975..Max-Forwards: 69..Contact: <sip:apo@external_ip_of_ua:23975;rinstance=6a2c0ccf1a30b6bf>..To: "apo"<sip:apo@external_ip_of_openser>..From: "apo"<sip:apo@external_ip_of_ua;tag=da6a3851..Call- ID: ODJmOTVkNmIxNjE0NWM3MWNiNTQ4ZjFlMmVkZDZmYjQ...CSeq: 1 REGISTER..Expires: 3600..Allow: INVITE, ACK, CANCEL, OPTIONS, B YE, REFER, NOTIFY, MESSAGE, SUBSCRIBE, INFO..User-Agent: X-Lite release 1006e stamp 34025..Content-Length: 0..P-hint: out bound.... my openser.cfg file is the initial openser openser.cfg file i didnt change it. ------------- # # $Id: openser.cfg 1676 2007-02-21 13:16:34Z bogdan_iancu $ # # simple quick-start config script # Please refer to the Core CookBook at http://www.openser.org/dokuwiki/doku.php # for a explanation of possible statements, functions and parameters. # # ----------- global configuration parameters ------------------------ debug=3 # debug level (cmd line: -dddddddddd) fork=yes log_stderror=no # (cmd line: -E) children=4 # Uncomment these lines to enter debugging mode #fork=no #log_stderror=yes # port=5060 # uncomment the following lines for TLS support #disable_tls = 0 #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" # ------------------ module loading ---------------------------------- #set module path mpath="/usr/local/lib64/openser/modules/" # Uncomment this if you want to use SQL database #loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! #loadmodule "auth.so" #loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line #modparam("usrloc", "db_mode", 2) # -- auth params -- # Uncomment if you are using auth module # #modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # #modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri==myself) { # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri==myself) { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication #if (!www_authorize("openser.org", "subscriber")) { # www_challenge("openser.org", "0"); # exit; #}; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

1 0

Re: [Users] 1.1.1 to 1.2 : radius failed
by Bogdan-Andrei Iancu 30 Mar '07

30 Mar '07

Bodin, looks like the error has its roots in the radiusclient library: rc_check_reply: received invalid reply digest from RADIUS server I'm not a RADIUS expert, so I cannot say more than this.....:( ...maybe try to use wireshark to see the packages between server and client radius. regards, bogdan Bodin Bruno wrote: > Bogdan-Andrei Iancu a écrit : >> Hi Bodin, >> >> Have you try to see if your radius cfg is ok? see: >> >> http://www.openser.org/docs/openser-radius-1.0.x.html#testing_radius_commun… >> >> >> regards, >> bogdan >> >> >> Bodin Bruno wrote: >>> Bogdan-Andrei Iancu a écrit : >>>> Hi Bodin, >>>> >>>> look into the system log (/var/log/{syslog|messages}) to get the >>>> error generated by the radius library. >>>> >>>> regards, >>>> bogdan >>>> >>>> Bodin Bruno wrote: >>>>> Same radius client config, same radius server config, just 1.2 >>>>> from 1.1.1 but an error : >>>>> >>>>> 5(23229) ERROR:auth_radius:radius_authorize_sterman: rc_auth failed >>>>> >>>>> Radius server get a good authenticate but openser failed this >>>>> after :( >>>> >>> On radius side, no error, in /var/log/messages there is only thise >>> line : >>> Mar 28 14:26:21 zebulon openser: rc_check_reply: received invalid >>> reply digest from RADIUS server >>> >>> >> > Hi, > Yes for sure. When a use 1.1.1 it work , and when I use 1.2 that > doesnt work, I thin k there is a difference between the two ... > > thank >

4 6

[Users] 0-terminated packet
by Tobias Lindgren 30 Mar '07

30 Mar '07

Hi all, Can anyone explain what this error mean? Mar 30 16:50:05 openser /sbin/openser[22632]: WARNING: udp_rcv_loop: upstream bug - 0-terminated packet from 192.168.0.1 50195 I'm getting this after an "Accepted" of a NOTIFY-message. Br, /Tobias

2 1

[Users] users authentication
by Joao Pereira 30 Mar '07

30 Mar '07

Hello I already have an OpenSER runnig nicely. Now I installed a second OpenSER (with other a newdomain) with the same database configuration and the same ser.cfg (except the IP). Everyting works fine... except the authentication... OpenSER always answers 401 Unauthorized. It only accepts clients when I comment this part: if (!www_authorize("newdomain.com", "subscriber")) { www_challenge("newdomain.com", "0"); break; }; The users exist in the database and I know the username / password. Whats happening? Thanks regards Joao Pereira

3 5

[Users] Unauthorized Calls - PLEASE HELP!
by Daryl Sanders 30 Mar '07

30 Mar '07

Hi Everyone, I aparently have something in my openser.cfg that is allowing unauthorized calls to go through to our PSTN gateways. I have included my config below for review. I would appreciate any help understanding how this might be happening. I am currently reviewing the CDRs from my PSTN gateways for clues as well. This is a pretty basic configuration with no NAT involved. Regards, Daryl route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); exit; }; if (method=="INVITE" || method=="ACK" || method=="BYE") { setflag(1); }; if (method=="INVITE") { if (is_user_in("From","inactive")) { if (uri =~ "^sip:911@") { xlog("L_NOTICE", "[$Tf] R1: $ci -- Allowing 911 Emergency Call on Inactive User\n" ); } else { sl_send_reply("403", "Forbidden"); xlog("L_NOTICE", "[$Tf] R1: $ci -- User Inactive\n" ); return; }; }; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { xlog( "L_NOTICE", "[$Tf] RR: $ci -- Loose Route $rm ($rd).\n" ); if (!t_relay()) { sl_reply_error(); }; return; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); return; }; if (method=="ACK") { route(1); return; } else if (method=="REGISTER") { route(2); return; } else if (method=="INVITE") { route(3); return; } else if (method=="BYE" || method=="CANCEL") { t_relay(); exit; } lookup("aliases"); if (uri!=myself) { route(1); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- t_on_reply("1"); t_on_failure("2"); if (!t_relay()) { sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ----------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); exit; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- # Trusted Provider IPs if (!src_ip==x.x.x.x)&&(!src_ip==x.x.x.x)&&(!src_ip==x.x.x.x) { if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); exit; }; consume_credentials(); }; lookup("aliases"); if (uri!=myself) { route(1); return; }; if (uri=~"[@:](192\.168\.|10\.|172\.16)" && !search("^Route:")){ sl_send_reply("479", "We do not forward to private IP addresses"); }; if ((uri =~ "^sip:0@")|| /* Operator Assistance */ (uri =~ "^sip:911@")|| /* 911 Emergency */ (uri =~ "^sip:411@")|| /* Directory Assistance */ (uri =~ "^sip:1[0-9]{10}@")) { /* Domestic PSTN */ route(4); return; }; if (uri=~"^sip:0111[0-9]*@") { # Kill calls to 011+1... (invalid dialing) sl_send_reply("406", "Not Acceptable"); return; } if (uri=~"^sip:011[0-9]*@") { # International PSTN if(!is_user_in("From","gateway1")) { strip(3); # Remove 011 for Gateway2 } route(4); return; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); return; }; route(1); } route[4] { # ----------------------------------------------------------------- # PSTN Handler # ----------------------------------------------------------------- prefix("+"); # add "+" to Request URI append_hf("P-Asserted-Identity: \"User\"<sip:+1$avp(s:rpid)@x.x.x.x>\r\n"); uac_replace_from("$fn","sip:+$fU@$fd:5060"); if(is_user_in("From","gateway1")) { force_send_socket(x.x.x.x:5060); xlog("L_NOTICE", "[$Tf] Message sent via IP-1\n" ); } else { force_send_socket(x.x.x.x:5060); xlog("L_NOTICE", "[$Tf] Message sent via IP-2\n" ); }; ds_select_domain("1","0"); route(1); } onreply_route[1] { # we are checking here for a progressing return... ie a 180 Ringing or # 183 session progress -- if this occurs we don't care from here on # about failures as a gateway is handling the call... if( status =~ "18[0-9]" ) { xlog( "L_INFO", "[$Tf] ORR: $ci -- SIP-$rs Reset t_on_failure()\n"); t_on_failure("0"); } else { xlog( "L_INFO", "[$Tf] ORR: $ci -- $rs $rr\n" ); } } failure_route[2] { # 408 -- timeout -- typically the end party has not answered # Since we cancel t_on_failure() on a provisional response we should not be # getting a 408 timeout from a gateway at this stage.. it will just "fall through" # If fr_timer expires t_check_status("408") is true, although $rs is <null> if( t_check_status("408") ){ xlog( "L_NOTICE", "[$Tf] FR: $ci -- TIMEOUT for Gateway $rd\n" ); } else { xlog( "L_NOTICE", "[$Tf] FR: $ci -- $rs reason $rr\n" ); } # 403 -- Not a valid number, or possibly no permission to use the gateway if( t_check_status("403") ){ xlog("L_NOTICE", "[$Tf] FR: $ci -- SIP-$rs Forbidden\n" ); return; } # 486 -- User Busy if( t_check_status("486") ){ xlog("L_NOTICE", "[$Tf] FR: $ci -- SIP-$rs Destination Busy\n" ); return; } # 487 -- Request Cancelled (usually in response to a CANCEL transaction) if( t_check_status("487") ){ xlog("L_NOTICE", "[$Tf] FR: $ci -- SIP-$rs Request Cancelled\n" ); return; } # At this stage we try the next gateway, if no next gateway we bail. if( ds_next_domain() ){ t_on_reply("1"); t_on_failure("2"); xlog( "L_NOTICE", "[$Tf] FR: $ci Next gateway $fU -> $tU via $rd\n" ); if( !t_relay() ){ xlog( "L_WARN", "[$Tf] FR: $ci -- ERROR - Can not t_relay()\n" ); return; } return; } else { xlog( "L_WARN", "[$Tf] FR: $ci No more gateways -> 503.\n" ); t_reply("503", "Service unavailable -- no more gateways" ); return; } }

3 3

[Users] t_relay() with variables(proto:ip:port)
by Benko 30 Mar '07

30 Mar '07

Hello! I would like to relay messages to a location("proto:ip:port") i retrieve from a db-table with avp_db_query, unfortunately t_relay doesn't allow using avps or pseudo-variables currently(iirc). Do you know a workaround without using t_relay or is there a way to use avps/pseudo-variables with t_relay() since 1.2? Thx Christian

3 7

[Users] A Problem with Serweb server monitoring
by Jarkko Nevala 30 Mar '07

30 Mar '07

Hi. I'm having problems with Serweb server monitoring script. As Instructed Serweb install file I have cron job, that executes "read_ser_moni.php" once in a minute. Every time the script is executed I get this error on serweb log: "serweb [error] server monitoring - 500 command 't_stats' not available" It also happens, when I'm executing the script from command line or executing manually fifo command with openserctl ("openserctl fifo t_stat"). It seems, that openser receives the command, but doesen't know what to do with it, because I get this error on syslog from openser: ERROR: fifo_server: command t_stats is not available **** done consume INFO: fifo_server: command empty Has the t_stat fifo command depricated or am I just missing some parameter from my cfg. thanks. JN

2 1

Re: [Users] Radius and OpenSer
by raviprakash sunkara 30 Mar '07

30 Mar '07

Sorry , U can use Alepo radius server , this Alepo radius server should communicate with Radiusclient of the OpenSER radiusclient dictionary should mached the Alepo radius server. I think U have Alepo radius server On 3/30/07, Jidntt <jidntt(a)yahoo.com.ar> wrote: > > Hi list, > > > > I've a question… I've a billing system named Alepo. > > I need to know if OpenSer support radius for connect to Alepo and how to > configure this. > > > > Thanks > > > > Pablo > > _______________________________________________ > Users mailing list > Users(a)openser.org > http://openser.org/cgi-bin/mailman/listinfo/users > > -- Thanks and Regards Ravi Prakash Sunkara ravi.sunkara(a)hyperion-tech.com M:+91 9985077535 www.hyperion-tech.com Client and Parent company :- www.august-networks.com

1 0

[Users] authentication with other DB
by Joao Pereira 30 Mar '07

30 Mar '07

Hello I just installed OpenSER and configured digest authentication with a local database. The content of the database was copied from other server. The ser.cfg and the database are the same... but OpenSER dont allow the users to register.... :( Whats the problem of doing a postgresql dump and then recover the DB in other PC? OpenSER doesnt allow it? Thanks regards Joao pereira

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users