sr-users

sr-users@lists.kamailio.org

50 participants
37557 discussions

[Users] Presence Problem - Publish Offline
by Hildebrando Trannin 21 May '07

21 May '07

Hi all, I was testing OpenSER presence functionality using eyebeam and a softphone developed by my team. The OFFLINE state with eyebeam worked perfectly, but with my softphone it didn't work. I set force_active = 1. XML sent by PUBLISH and OpenSER log are below. Can anyone help me? Thanks, Hildebrando PIDF XML: <?xml xmlns="urn:ietf:params:xml:ns:pidf" entity="sip:hildebrando@voip.maritaca"> <presence> <tuple id=""> <status> <basic>closed</basic> </status> <note>offline</note> </tuple> </presence> The basic difference between my application and eyebeam is that eyebeam uses RPID XML and I use PIDF XML. OPENSER LOG: 3(26039) PRESENCE: update_presentity: The presentity status is offline; do not send notify

2 1

[Serusers] Does SER's MYSQL work in SUSE Linux?
by Cyprian Clement 20 May '07

20 May '07

Hello Community, Does anyone know whether it's possible to install the current recommended MYSQL on SUSE Linux. I have a Machine with a SUSE installed on it. I have successfully installed SER 0.9.6 but now I would like to have MYSQL for authentication support. Does the SER's recommended MYSQL work with SUSE?. I only see the talk about Redhat and Debian so unsure if it works with SUSE. Many thanks for in advance. Cyprian. ---------- ___________________________________________________________ What kind of emailer are you? Find out today - get a free analysis of your email personality. Take the quiz at the Yahoo! Mail Championship. http://uk.rd.yahoo.com/evt=44106/*http://mail.yahoo.net/uk

2 1

[Users] Dropped calls with OpenSER 1.1.x and Asterisk >= 1.2.14
by Edoardo Serra 19 May '07

19 May '07

Hi guys, I'm having a problem about asterisk dropping calls received from OpenSER The problems was spotted at Asterisk users mailing lists http://lists.digium.com/pipermail/asterisk-users/2007-April/184875.html Asterisk complains about an ACK not received and drops the calls. It expects OpenSER to send an ACK back to its '200 OK' when the call is set up Is that a problem OpenSER should solve ??? Tnx in advance Regards Edoardo Serra WeBRainstorm S.r.l.

2 3

[Users] Getting start
by Mhmd 19 May '07

19 May '07

HI , Kindly provide me with the link , where can i get the OPENSER , thank you Mohammad

2 1

[Users] openser as b2bua
by A.M. 19 May '07

19 May '07

The openser website clearly states that OpenSER is not a B2BUA. Is there a particular architectural limitation that would prevent a module from implementing a B2BUA within OpenSER? Cheers, M

3 2

[Users] openser and postgresql
by zhaojunjie01＠st.lzu.edu.cn 19 May '07

19 May '07

Hello: I use postgresql to authorize the user.But it cann't work.Who can give me some suggestion? Thank you very much! My error log and openser.cfg fileas follows: #Error log May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: INFO: statistics manager successfully initialized May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: PostgreSQL - initializing May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: StateLess module - initializing May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: TM - initializing... May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: Maxfwd module- initializing May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: INFO:ul_init_locks: locks array size 512 May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: TextOPS - initializing May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: AUTH module - initializing May 18 12:24:43 th016184 /usr/local/sbin/openser[4358]: AUTH_DB module - initializing May 18 12:24:44 th016184 /usr/local/sbin/openser[4358]: register_udomain(): Cannot open database connection file! May 18 12:24:44 th016184 /usr/local/sbin/openser[4358]: domain_fixup(): Error while registering domain May 18 12:24:44 th016184 /usr/local/sbin/openser[4358]: ERROR: fix_actions: fixing failed (code=-1) at cfg line 145 May 18 12:24:44 th016184 /usr/local/sbin/openser[4358]: INFO:mi_fifo:mi_destroy: process hasn't been created -> nothing to kill #openser.cfg loadmodule "postgres.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "xlog.so" # Uncomment this if you want digest authentication # mysql.so must be loaded ! loadmodule "auth.so" loadmodule "auth_db.so" # ----------------- setting module-specific parameters --------------- # -- mi_fifo params -- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # -- usrloc params -- #modparam("usrloc", "db_mode", 0) # Uncomment this if you want to use SQL database # for persistent storage and comment the previous line modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "postgres://openser:openserrw@localhost/openser") # -- auth params -- # Uncomment if you are using auth module # modparam("auth_db", "calculate_ha1", yes) # # If you set "calculate_ha1" parameter to yes (which true in this config), # uncomment also the following parameter) # modparam("auth_db", "db_url", "postgres://openser:openserrw@localhost/openser") modparam("auth_db", "password_column", "password") # -- rr params -- # add value to ;lr param to make some broken UAs happy modparam("rr", "enable_full_lr", 1) # ------------------------- request routing logic ------------------- # main routing logic route{ # initial sanity checks -- messages with # max_forwards==0, or excessively long requests if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; }; if (msg:len >= 2048 ) { sl_send_reply("513", "Message too big"); exit; }; # we record-route all messages -- to make sure that # subsequent messages will go through our proxy; that's # particularly good if upstream and downstream entities # use different transport protocol if (!method=="REGISTER") record_route(); # subsequent messages withing a dialog should take the # path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); route(1); }; if (!uri=~"localhost") { # mark routing logic in request # mark routing logic in request append_hf("P-hint: outbound\r\n"); # if you have some interdomain connections via TLS #if(uri=~"@tls_domain1.net") { # t_relay("tls:domain1.net"); # exit; #} else if(uri=~"@tls_domain2.net") { # t_relay("tls:domain2.net"); # exit; #} route(1); }; # if the request is for other domain use UsrLoc # (in case, it does not work, use the following command # with proper names and addresses in it) if (uri=~"localhost") { if (method=="REGISTER") { # Uncomment this if you want to use digest authentication if (!www_authorize("localhost", "subscriber")) { www_challenge("localhost", "0"); exit; }; save("location"); exit; }; lookup("aliases"); if (!uri==myself) { append_hf("P-hint: outbound alias\r\n"); route(1); }; # native SIP destinations are handled using our USRLOC DB if (!lookup("location")) { sl_send_reply("404", "Not Found"); exit; }; append_hf("P-hint: usrloc applied\r\n"); }; route(1); } route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; }

1 0

[Users] pseudovariables in rewriteuser() - OpenSER 1.1.x
by Edoardo Serra 18 May '07

18 May '07

Hi all, I have the need to call rewriteuser() with a pseudovariable. My need is to rewrite the user with the content of an extra header I put in the SIP packet coming from a PSTN gateway I tried with rewriteuser("$hdr(X-DNID)"); but it doesn't replace the string with the ocntent of the pseudovariable. Any idea ? Tnx in advance Edoardo Serra WeBRainstorm S.r.l.

3 5

[Users] "Register problem"
by Danielo Garcia 18 May '07

18 May '07

Hello all. I have a problem with register I dont know why, when I try to register a user behind NAT listening in port 5060 the evalution of the sentence "if (uri==myself){" is true and when change the port for another for example 5070 the evaluation of the same sentence is false could somebody explain me? or how can I do the sentence "if (uri==myself){" using patern matching My configuration is listen = IP-MYSERVER port = 5060 Thanks..

2 1

[Users] using of myself Core Values
by Victor Gamov 18 May '07

18 May '07

hi is it possible to do following in config if ( $avp(s:var_name) != myself ) { # do something } var_name is AVP looking like "192.168.0.1" If not -- how I can check that $avp(s:var_name) is not one of my IP-address (without using DOMAIN or other module but by core only) ? Thanks! -- CU, Victor Gamov

2 2

Re: [Users] x-lite and nat_uac_test(16)
by Alexander 'Leo' Bergolth 18 May '07

18 May '07

Hi! On 05/18/2007 05:12 PM, Andreas Granig wrote: > Alexander Bergolth wrote: >> I've noticed that (at least on my boxes) x-lite uses a different >> source-port for the sip-connection than the one that is announced in the >> Via-header. (See the example below.) > > Are you sure there isn't any NAT or ALG in between? I've done the packet dump on both ends, on a box running x-lite (with the windows-firewall disabled) and on the proxy-host. Both show the same source/destination ip-adresses and ports, so I assume there cannot be any kind of ALG. However, there is some packet filter (not doing NAT) between the box and the proxy, maybe x-lite does some firewall-detection on startup and uses the wrong port-number in the via header intentionally to enforce the use of an rtp-proxy? I'll do some tests on a box that isn't protected by a packet filter on Monday. > By default, x-lite binds to local port 5060, but you've some > non-standard ports in there. So my guess is either a non-standard > port setting in x-lite and NAT, or a faulty ALG on the NAT device. I don't have any special settings in X-Lite, ICE is disabled, "Use local IP address" is enabled. I've noticed that your version of x-lite uses UDP, mine seems to use TCP by default. Cheers, --leo > Here's a trace using x-lite 2.0 r1105d (Linux): > > U 192.168.123.129:5060 -> <public IP>:5060 > REGISTER sip:<some domain> SIP/2.0. > Via: SIP/2.0/UDP 192.168.123.129:5060;rport;branch=z9hG4<snip> > > Cheers, > Andreas -- e-mail ::: Alexander.Bergolth (at) wu-wien.ac.at fax ::: +43-1-31336-906050 location ::: Computer Center | Vienna University of Economics | Austria

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users