sr-users

sr-users@lists.kamailio.org

21 participants
37573 discussions

[Users] openser radiator radius accounting packets are missing
by Russell Williams 13 Jun '07

13 Jun '07

This is a packet dump from radiator.. Where are the attributes to identify the caller , and the callee. The information I need is timestamp which is here . callingstationid calledstationid originatingip and destinationip Any suggestions on how to get them to show up here . BTW the stop record is as lacking in info as this start record. Attributes: Acct-Status-Type = Start Service-Type = Sip-Session Sip-Response-Code = 200 Sip-Method = Invite Event-Timestamp = 1181607270 Sip-From-Tag = "EELf2-pTUK4" Sip-To-Tag = "N78f2-UF9FM0" Acct-Session-Id = "0PkXg-tEbc4f2(a)207.158.49.3" NAS-IP-Address = 207.158.49.3 NAS-Port-Id = 5060 Acct-Delay-Time = 0 Mon Jun 11 17:15:53 2007: DEBUG: Handling request with Handler 'NAS-IP-Address=xx.xx.xx.xx Thank you Russell Williams

3 2

Re: [Users] Accounting Bye packet Issue
by vallimamod abdullah 13 Jun '07

13 Jun '07

Hi Dan, > From: "Dan" <fiedler.dan(a)gmail.com> > To: <users(a)openser.org> > Date: Wed, 13 Jun 2007 11:45:41 +0530 > Subject: [Users] Accounting Bye packet Issue > > I am facing a peculiar issue with accounting. BYE packets are getting rejected > with error message: 478 Unresolvable destination. >From your logs, I see: U 59.176.78.110:50496 -> 210.68.65.78:5060 BYE sip:210.68.65.78 SIP/2.0. Route: <sip:@209.67.171.10;transport=udp> ^^^^ The bye packet is broken as you don't have the username part on the Route header uri. > This happens only in case I use ATA for calling and with some gateways only. > With the same gateway if I call using xlite, accounting works fine. I am > unable to find out the reason. I haven't worked with these phones but it seems to me that they are doing strict routing like some pre-rfc3261 devices. In "normal" case, the first line would have looked like: BYE sip:user@210.68.65.78 SIP/2.0 without the route header. Hope this will help. -- Regards, vma .

1 0

[Users] Accounting Bye packet Issue
by Dan 13 Jun '07

13 Jun '07

Hi, I am facing a peculiar issue with accounting. BYE packets are getting rejected with error message: 478 Unresolvable destination. This happens only in case I use ATA for calling and with some gateways only. With the same gateway if I call using xlite, accounting works fine. I am unable to find out the reason. Can someone help on this? I am attaching the log when I am calling from a ATA and BYE is being rejected by openser. Regards Dan

2 1

[Users] rtp relay & transcoding
by Ryan Mitchell 13 Jun '07

13 Jun '07

Regarding RTP relay (e.g. media proxy), and transcoding -- This topic has come up many times before in various forms, but I still have not found any obvious solution that's highly scalable and cheap (well sure, I can dream). We have lots of customers behind various firewalls using various codecs. Customers call each other (both parties behind firewall) and to/from carriers. Certainly this is a common use-case. What do you do? What are best known practices? Commercial media gateway, or open-source solutions? We use both OpenSER and a custom B2BUA written against the NIST Java stack. We need a way to transcode when needed. Obviosly mediaproxy module is great, but doesn't transcode. Ideally, what I'm looking for: * at the point where our system determines that transcoding or rtp relay is needed, a media gateway is chosen based on network proximity (e.g.: 1/2 our customers are in the U.S., 1/2 in Brazil; should pick a media gateway accordingly to minimize network path). * our system then signals the media gateway (mgcp?) to setup the channels, and modifies the SDPs in the SIP path accordingly. * even more ideally: the media gateway signals our system with inband or rfc2833 dtmf events, plus rtcp reports when available. I think Asterisk could be hacked to do this. Does anyone know of a commercial product that's not too expensive? Thoughts? Advice? thanks, -- Ryan Mitchell <rjm(a)tcl.net> Telecom Logic, LLC http://www.tcl.net

2 3

[Users] Question about openser with sip trunks
by jamespev 13 Jun '07

13 Jun '07

1 0

[Serusers] error when compiling SER 2.0 rc1
by James Beatson 12 Jun '07

12 Jun '07

Can someone explain the cause for the following compile error when trying to compile SER 2.0 [root@localhost ser-2.0.0-rc1]# make group_include-"standard" all make: *** Warning: File `Makefile.rules' has modification time in the future (2006-09-29 03:52:24 > 2006-06-11 21:31:35.613769) bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce flex cfg.lex make: *** Warning: File `Makefile.rules' has modification time in the future (2006-09-29 03:52:24 > 2006-06-11 21:31:39.786688) bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce bison -d -b cfg cfg.y cfg.y: conflicts: 1 shift/reduce flex cfg.lex > > [root@localhost ser-2.0.0-rc1]# James Beatson Camiant 781-264-2297 www.camiant.com <blocked::http://www.camiant.com/>

2 3

[Users] inner join using OpenSer database API
by Tiberius DULUMAN 12 Jun '07

12 Jun '07

Hello, I need to write an OpenSER module that should persist it's data in a database and sometimes access it from there. After reading the Database API of OpenSer documentation, I've start the implementation, but soon I've got one major problem: I can't see any way to select data by joining more tables. Is it possible to do this? dbf.query callback seems to work only with the current table from db_con_t structure. Thanks _________________________________________________________________ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

2 1

[Serusers] need help!
by Mukesh Prajapati 12 Jun '07

12 Jun '07

hi as per my earlier mail regarding problem with my-sql support on SER.... here is the error msg i m getting: root@students-desktop:/etc/ser# ser 0(6762) ERROR: load_module: could not open module </usr/local/lib/ser/modules/mysql.so>: libmysqlclient.so.12: cannot open shared object file: No such file or directory 0(6762) parse error (15,13-14): failed to load module ERROR: bad config file (1 errors) here is my config "ser.cfg" file (whc is same as "auth-mysql.cfg" provided on website) ===================== # $Id: auth-mysql.cfg 46 2006-01-25 04:21:30Z /CN=Paul Hazlett/emailAddress=paul(a)onsip.org $ debug=3 fork=no log_stderror=yes listen=192.0.2.13 # put your server IP address here port=5060 children=4 dns=no rev_dns=no fifo="/tmp/ser_fifo" fifo_db_url="mysql://ser:heslo@localhost/ser" loadmodule "/usr/local/lib/ser/modules/mysql.so" loadmodule "/usr/local/lib/ser/modules/sl.so" loadmodule "/usr/local/lib/ser/modules/tm.so" loadmodule "/usr/local/lib/ser/modules/rr.so" loadmodule "/usr/local/lib/ser/modules/maxfwd.so" loadmodule "/usr/local/lib/ser/modules/usrloc.so" loadmodule "/usr/local/lib/ser/modules/registrar.so" loadmodule "/usr/local/lib/ser/modules/uri_db.so" loadmodule "/usr/local/lib/ser/modules/auth.so" loadmodule "/usr/local/lib/ser/modules/auth_db.so" modparam("auth_db|uri_db|usrloc", "db_url", "mysql://ser:heslo@localhost/ser") modparam("auth_db", "calculate_ha1", 1) modparam("auth_db", "password_column", "password") modparam("usrloc", "db_mode", 2) modparam("rr", "enable_full_lr", 1) route { # ----------------------------------------------------------------- # Sanity Check Section # ----------------------------------------------------------------- if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); break; }; if (msg:len > max_len) { sl_send_reply("513", "Message Overflow"); break; }; # ----------------------------------------------------------------- # Record Route Section # ----------------------------------------------------------------- if (method!="REGISTER") { record_route(); }; # ----------------------------------------------------------------- # Loose Route Section # ----------------------------------------------------------------- if (loose_route()) { route(1); break; }; # ----------------------------------------------------------------- # Call Type Processing Section # ----------------------------------------------------------------- if (uri!=myself) { route(1); break; }; if (method=="ACK") { route(1); break; } else if (method=="INVITE") { route(3); break; } else if (method=="REGISTER") { route(2); break; }; lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } route[1] { # ----------------------------------------------------------------- # Default Message Handler # ----------------------------------------------------------------- if (!t_relay()) { sl_reply_error(); }; } route[2] { # ----------------------------------------------------------------- # REGISTER Message Handler # ---------------------------------------------------------------- sl_send_reply("100", "Trying"); if (!www_authorize("","subscriber")) { www_challenge("","0"); break; }; if (!check_to()) { sl_send_reply("401", "Unauthorized"); break; }; consume_credentials(); if (!save("location")) { sl_reply_error(); }; } route[3] { # ----------------------------------------------------------------- # INVITE Message Handler # ----------------------------------------------------------------- if (!proxy_authorize("","subscriber")) { proxy_challenge("","0"); break; } else if (!check_from()) { sl_send_reply("403", "Use From=ID"); break; }; consume_credentials(); lookup("aliases"); if (uri!=myself) { route(1); break; }; if (!lookup("location")) { sl_send_reply("404", "User Not Found"); break; }; route(1); } ========================= --------------------------------- You snooze, you lose. Get messages ASAP with AutoCheck in the all-new Yahoo! Mail Beta.

2 1

[Serusers] ser osp module with a peering server
by julia heller 12 Jun '07

12 Jun '07

hi, has somebody tried to enroll ser osp module with a peering server? I use this howto (http://sourceforge.net/docman/display_doc.php?docid=43221&group_id=187299) but I cannot find the three required crypto files (localcert.pem, pkey.pem and cacert_#.pem). I hope somebody can help me! I use ser in version 0.9.6. Kind regards, Julia -- GMX FreeMail: 1 GB Postfach, 5 E-Mail-Adressen, 10 Free SMS. Alle Infos und kostenlose Anmeldung: http://www.gmx.net/de/go/freemail

2 2

[Users] gateway redirect
by Joao Pereira 12 Jun '07

12 Jun '07

Hello I'm using a Patton gateway with my Openser and everything works fine, except when OpenSER has to redirect a call to Asterisk. If I use X-Lite, OpenSER can redirect the call to Asterisk, but with the Patton gateway it doesnt work. In the moment Im just using rewritehost("....."); The problem could be in the Patton gateway configuration, but I just want to be sure... does OpenSER needs some special configuration in order to the redirects to work? Thanks Joao Pereira -- ______________________________________________ João Gomes Pereira FCCN Av. do Brasil, nº 101 1700-066 Lisboa tel: +351 218 440 100 - fax: +351 218 472 167 email|SIP: joao.pereira(a)fccn.pt http://www.fccn.pt ______________________________________________ ---

2 5

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users