sr-users

sr-users@lists.kamailio.org

36 participants
37545 discussions

help
by Said Hassani 08 Aug '21

08 Aug '21

Dear Team, I would like to know how to link Kamailio with openIMSCore?I would like to use Kamailio as an Application server.Please guide me or if there is someone who has worked on this subject, I would like to benefit from his help.

3 4

XCAP server with simservs support
by H Yavari 05 Aug '21

05 Aug '21

Hi to all, As I found there isn't any support for this AUID : simservs.ngn.etsi.org in Kamailio.Anyone can confirm that we can't use Kamailio as mmtel for IMS with the current xcap_server module?!!Thank you. Regards,Hossein

2 2

no debug trace of incoming request
by Juha Heinanen 05 Aug '21

05 Aug '21

Is it somehow possible that ngrep shows incoming INVITE arriving over TCP to Kamailio's listening address and port, but there is no debug trace of the request (e.g. receive_msg(): --- received sip message ...) in syslog? -- Juha

3 3

Issues with TOPOS when not relaying an in-dialog request
by Marrold 05 Aug '21

05 Aug '21

Hi, I am currently using TOPOS to make Kamailio behave more like a B2BUA from the clients perspective. It's working well, however I have discovered a scenario where it fails. To aid with some interoperability I am sending (sl_send_reply) 200 OK to an in-dialog SUBSCRIBE request during a call. Once this has happened, the subsequent BYE from the B leg goes to the incorrect (Private) IP. If I disable this SUBSCRIBE, or relay it to the B leg, the BYE goes to the expected IP address. Does anyone know where I am going wrong? I have tried not calling record_route() for these messages but the result is the same. I've attached the ladder diagram of the call below. Note the subscribe is not relayed in this scenario. Thanks! [image: image.png]

4 8

Re: [SR-Users] How to unload previously loaded destinations in the case of applying multiple ds_select_domain
by Serdar GÜÇLÜER 04 Aug '21

04 Aug '21

> Serdar, > > Have you tried to clean variables before calling new ds_select_domain(), > that are using by dispatcher module failover? > > Like > https://kamailio.org/docs/modules/5.3.x/modules/dispatcher.html#dispatcher.… <https://kamailio.org/docs/modules/5.3.x/modules/dispatcher.html#dispatcher.…> > and so on? > > But as I got, you're saying, that calling ds_select_domain() with > different setid's in a case of fail, not really fails, but using "old" > available destinations from previous attempt? > > Regards, > Igor Igor, also thanks for your interest. > Hello, > > delete the xavps based on the names you set via modparams xavp_dst and > xavp_ctx. > > Cheers, > Daniel I remove xavp value using "xavp_rm("_dsdst_")", i supposed that my problem was solved but in my other tests, i recognised that xavp_rm removed the first index of "xavp(_dsdst_)" not all previous destinations(indexes). after researching, i found a post at https://lists.kamailio.org/pipermail/sr-users/2020-May/109192.html and i removed all ellements of list as below, if(defined $xavp(_dsdst_)) { while($xavp(_dsdst_[0]) != $null) { xlog("L_INFO", "--- Loaded Dispatchers --- Grp : $xavp(_dsdst_[0]=>grp)\n"); xlog("L_INFO", "--- Loaded Dispatchers --- Uri : $xavp(_dsdst_[0]=>uri)\n"); $xavp(_dsdst_[0]) = $null; } } it worked but i am not sure it is a best solution. Is there another simple way to delete all indexes of xavp? Best regards, Serdar

1 0

Converting Cisco SIP NOTIFY DTMF to SIP INFO (Binary operations)
by Marrold 04 Aug '21

04 Aug '21

Hi, I am using an old Cisco 2811 with an FXS card and trying to get it to convert between POTS and SIP. Mostly for "fun". For the most part it works, however there are some problems with DTMF in the call. Because the end device uses pulse dialling it seems that only the Cisco Proprietary SIP NOTIFY method of sending DTMF is supported. It sends 4 bytes in the message body that indicate the DTMF digit sent. I'd like to convert it to the more standard SIP INFO method. The docs about the encoding are here - https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/sip/configuration/1… I looked at the transformations but couldn't find anything relevant. Is it possible to extract the binary from the body and decode it? Thanks Matthew

1 0

which is better for B2BUA
by Mojtaba 04 Aug '21

04 Aug '21

Hello there, According to , https://lists.kamailio.org/pipermail/sr-users/2016-March/092058.html, which talked about B2BUA (just signalling) in Kamailio. As i have experienced working with SEMS, freeswitch and Kamailio while using B2BUA feature, Each of them have pros and cons: 1- The sems is a light sip engine server with several applications (like as sbc) for using b2bua. All incoming and outgoing calls could go to sems server for doing b2bua like this: Incoming<=======>Kamailio<========>Sems<========>Kamailio<=======>outgoing 2- In sems, you could disable rtp realying. It forces sems to work just as b2bua without anchoring RTP 3- Easy to use different active profiles in routing. Just a couple of things there are in SEMS. For example, the sems adds itself (local IP) in Via header, and it couldn't be common in b2bua. like this: . . . INVITE sip:200@cloud.domain.com;transport=UDP SIP/2.0 Via: SIP/2.0/UDP 10.10.10.200;branch=z9hG4bK2f53.07a3fd9edaa8c8d609ab2ac6b01a087f.0 *================================>Kamailio public IP* *Via: SIP/2.0/UDP 127.0.0.1:5080;received=127.0.0.1;branch=z9hG4bKsPRMNast;rport=5080 ===============================>private loopback sems ip* From: <sip:100@cloud.domain.com ;transport=UDP>;tag=6FFDB493-60EABB3600016ECD-379F9700 To: <sip:200@cloud.domain.com;transport=UDP> CSeq: 10 INVITE Call-ID: Y2M1ODQxNTZmMjdkZWZjN2U5MmMyYjBmN2Y2OGY1ODQ._leg2 Route: <sip:mo@127.0.0.1:5060;lr> Max-Forwards: 69 Allow: INVITE, ACK, CANCEL, BYE, NOTIFY, REFER, MESSAGE, OPTIONS, INFO, SUBSCRIBE User-Agent: Z 3.3.25608 r25552 Content-Type: application/sdp Contact: <sip:127.0.0.1:5080;transport=udp> Content-Length: 246 . . . For this reason, Is there a way to avoid this issue? I know it is possible to do this by using other modules like textops and retransformation ? And why in Kamailio, there is no b2bua module to perform all b2bua functionality, yet? Thanks with Best Regards. -- --Mojtaba Esfandiari.S

6 9

How to unload previously loaded destinations in the case of applying multiple ds_select_domain
by Serdar GÜÇLÜER 03 Aug '21

03 Aug '21

Hello all, I have a trouble that is related to the way of usage of dispatcher module. I am working with Kamailio 5.3.2 and using dispatcher module as load balancer to route calls to the media gateways. My dispatching routes are below as simply, route[DISPATCH] { if(ds_select_domain("2", "4")) { route(MYRELAY); } else { send_reply("503","Service Unavailable - No MGW"); exit; } } route[MYRELAY] { t_on_failure("MYFAILURE"); if(!t_relay()) { sl_reply_error(); } exit; } failure_route[MYFAILURE] { route(NATMANAGE); revert_uri(); if (t_is_canceled()) { exit; } if ($T_reply_code == 408 || $T_reply_code == 503) { if(ds_next_domain()) { route(MYRELAY); } else { send_reply("503","Service Unavailable"); exit; } } else { if(ds_select_domain("6", "4")) { route(MYVMRELAY); } else { send_reply(486,"Busy"); exit; } } } route[MYVMRELAY] { t_on_failure("MYVMFAILURE"); if(!t_relay()) { sl_reply_error(); } exit; } failure_route[MYVMFAILURE] { route(NATMANAGE); revert_uri(); if (t_is_canceled()) { exit; } if(ds_next_domain()) { route(MYVMRELAY); } else { send_reply("503","Service Unavailable"); exit; } } I have multiple media gateways(setid=2) and voicemail servers(setid=6). As can be seen from the configuration, after first routing, for transaction reply code except 408 or 503, I am routing call to the voicemail server using dispatcher. In that phase, dispatcher module is remembering previously loaded destinations that come from first ds_select_domain and module try to route these destinations in the case that all voicemail servers are unavailable. So basically, I want to unload all destinations comes from previous ds_select_domain. From the documentation, i tried ds_load_update and ds_load_unset methods but not worked for me. Is there any way to overcome that problem or any right usages of these methods. Thank you, Serdar

2 2

Re: [SR-Users] How to unload previously loaded destinations in the case of applying multiple ds_select_domain
by Serdar GÜÇLÜER 02 Aug '21

02 Aug '21

Hello Daniel, I removed xavps using with xavp_rm and problem solved. Thanks for your helping Serdar > Hello, > > delete the xavps based on the names you set via modparams xavp_dst and > xavp_ctx. > > Cheers, > Daniel > > On 30.07.21 11:14, Serdar GÜÇLÜER wrote: > >/Hello all, />//>/I have a trouble that is related to the way of usage of dispatcher > module. />//>/I am working with Kamailio 5.3.2 and using dispatcher module as load />/balancer to route calls to the media gateways. />//>/My dispatching routes are below as simply, />//>/route[DISPATCH] { />/ if(ds_select_domain("2", "4")) { />/ route(MYRELAY); />/ } else { />/ send_reply("503","Service Unavailable - No MGW"); />/ exit; />/ } />/} />/route[MYRELAY] { />/ t_on_failure("MYFAILURE"); />/ if(!t_relay()) { />/ sl_reply_error(); />/ } />/ exit; />/} />/failure_route[MYFAILURE] { />/ route(NATMANAGE); />/ revert_uri(); />/ if (t_is_canceled()) { />/ exit; />/ } />/ if ($T_reply_code == 408 || $T_reply_code == 503) { />/ if(ds_next_domain()) { />/ route(MYRELAY); />/ } else { />/ send_reply("503","Service Unavailable"); />/ exit; />/ } />/ } else { />/ if(ds_select_domain("6", "4")) { />/ route(MYVMRELAY); />/ } else { />/ send_reply(486,"Busy"); />/ exit; />/ } />/ } />/} />/route[MYVMRELAY] { />/ t_on_failure("MYVMFAILURE"); />/ if(!t_relay()) { />/ sl_reply_error(); />/ } />/ exit; />/} />/failure_route[MYVMFAILURE] { />/ route(NATMANAGE); />/ revert_uri(); />/ if (t_is_canceled()) { />/ exit; />/ } />/ if(ds_next_domain()) { />/ route(MYVMRELAY); />/ } else { />/ send_reply("503","Service Unavailable"); />/ exit; />/ } />/} />//>//>/I have multiple media gateways(setid=2) and voicemail />/servers(setid=6). As can be seen from the configuration, />/after first routing, for transaction reply code except 408 or 503, I />/am routing call to the voicemail server using dispatcher. />/In that phase, dispatcher module is remembering previously loaded />/destinations that come from first ds_select_domain />/and module try to route these destinations in the case that all />/voicemail servers are unavailable. />/So basically, I want to unload all destinations comes from previous />/ds_select_domain. />//>/From the documentation, i tried ds_load_update and ds_load_unset />/methods but not worked for me. />//>/Is there any way to overcome that problem or any right usages of these />/methods. />//>/Thank you, />//>/Serdar />//>//>/__________________________________________________________ />/Kamailio - Users Mailing List - Non Commercial Discussions />/* sr-users at lists.kamailio.org > <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> />/Important: keep the mailing list in the recipients, do not reply only > to the sender! />/Edit mailing list options or unsubscribe: />/* https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> / > -- > Daniel-Constantin Mierla -- www.asipto.com > www.twitter.com/miconda -- www.linkedin.com/in/miconda

2 1

Access via script to location data in the memory
by Social Boh 31 Jul '21

31 Jul '21

Hello List, is there a way to access location data from kamailio script? I mean data I can see with the command: kamctl ul show Regards -- --- I'm SoCIaL, MayBe

3 11

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users