sr-users

sr-users@lists.kamailio.org

33 participants
37542 discussions

Compile kamailio-5.4 against openssl1.1.1
by Antony Russell 13 Oct '21

13 Oct '21

Hello I see that support for compiling kamailio against openssl1.1.1 was recently added (https://github.com/kamailio/kamailio/pull/2779) and I see that this can be done in kamailio-5.5.2. Will this ability be made available in kamilio-5.4? I see it is not in the most recent 5.4 release (5.4.7) -- *Antony Russell* Chief Technical Officer Tel 087 820 8113 antony.russell(a)telviva.co.za www.telviva.co.za *Telviva (Pty) Ltd - formerly Connection Telecom (Pty) Ltd* -- https://www.telviva.co.za/legal/email-disclaimer <https://www.telviva.co.za/legal/email-disclaimer>

1 0

Fail Call from Webrct to PSTN SIP Trunk
by Abdul Rahman Reza 11 Oct '21

11 Oct '21

Hi Everyone There some log kamailio Warning: 399 03077.08860.B.005.422.228.0.15.01039.00000000.00000 "SDP body length beyond limit" how to increase maximum length sdp in kamailio, because i don't see any configuration related to sizing max length SDP on kamailio documentation please help me Thank you very much

3 3

Let's Encrypt DST Root CA X3 cert CA expiration 30th/Sept - Any issues?
by Joel Serrano 11 Oct '21

11 Oct '21

Hello, I'm wondering if anyone had any issues yesterday with the expiration of the DST Root CA X3 cert? Out of all the servers I manage, only a couple were affected (debian 8). They were production servers so we replaced the cert with a different one to solve the issue while we find the root cause. Anyone out there had any issues yesterday because of this? I'm just curious! Joel.

10 12

upgrade kamailio 4.4.x-to-5.0.0 - PostgreSQL migrations
by Giovanni Tommasini - timenet srl 11 Oct '21

11 Oct '21

Hi Dears, I'm working on upgrading Kamailio from 4.4.6 to 5.4.0 in an installation where I use PostgreSQL I understand that I have to upgrade in steps by following these links: - http://www.kamailio.org/wiki/install/upgrade/4.4.x-to-5.0.0 - http://www.kamailio.org/wiki/install/upgrade/5.0.x-to-5.1.0 - https://www.kamailio.org/wiki/install/upgrade/5.1.x-to-5.2.0 - https://www.kamailio.org/wiki/install/upgrade/5.2.x-to-5.3.0 - https://www.kamailio.org/wiki/install/upgrade/5.3.x-to-5.4.0 in most of these links, in the section "Database", I find only the subsection "MySQL Database Structure", but I don't find the indications for DB migrations for PostgreSQL Database. Only here https://www.kamailio.org/wiki/install/upgrade/5.2.x-to-5.3.0 I found both the subsection "MySQL Database Structure" and "PostgreSQL Database Structure". What does this mean? - that I'm getting lost in a glass of water? - or that I don't have to make any changes to PostgreSQL? - or that the queries to be launched on PostgreSQL are the same as those for MySQL? I would discard this hypothesis - or that the wiki sections for PostgreSQL are missing? If this were the case, I could proceed with the update and then share the queries I launched to update the wiki. thanks a lot Giovanni Tommasini

3 5

Critical log when $mbu pseudovariable is accessed
by Alberto Izquierdo 11 Oct '21

11 Oct '21

Hi, I'm getting some CRITICAL logs when accessing the content of the $mbu pseudovariable in a "onsend_route" function. The log lines look like this: ``` CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:893 FIXME: null send_sock CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:1479 FIXME: null bind_address CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket CRITICAL core 35847:core/msg_translator.c:493 null send socket ``` I've checked the msg_translator.c source file and there are many of `LM_CRIT("FIXME: {message}\n");` calls, and I wonder if the "FIXME" tag relates to the location of the error: a Kamailio error or there is an issue in the user code. Could I have more information about the "FIXME" tag? Thanks in advance!

2 7

rtpengine module dependencies
by Juha Heinanen 10 Oct '21

10 Oct '21

rtpengine module README tells this about module dependencies: 3.1. Kamailio Modules The following modules must be loaded before this module: tm module - (optional) if you want to have rtpengine_manage() fully functional Looks like this is not correct. If Kamailio connects to rtpengine over websocket protocol, then there is dependency on lwsc module. I haven't checked if lwsc module works without tls module when wss is used. -- Juha

1 0

Kamailio Inbound proxy to Asterisk - ACL Filtering
by Mihai 09 Oct '21

09 Oct '21

Hello, I have an issue with filtering on the asterisk side, my requests are: UsersPhones(bria) -> Kamailio -> Asterisk -> Sip Trunk Out. The goal is to manage a new layer of protection ( IP filtering / Whitelisting ). When I try to compile a list of Whitelisted IP in sip.conf I get this error: NOTICE[205]: acl.c:748 ast_apply_acl: SIP contact ACL: Rejecting '145.72.23.45' due to a failure to pass ACL '(BASELINE)' WARNING[205]: chan_sip.c:17061 parse_register_contact: Domain '5.12.16.2:48669' disallowed by contact ACL (violating IP 145.72.23.45) WARNING[205]: chan_sip.c:17933 register_verify: Registration denied because of contact ACL The IP 145.72.23.45, is the proxy kamailio and if I added it to sip.conf it works, but so does every ip afterwards. I tried with contactpermit also with permit, the result is the same as long as I permit the proxy ip it works. Is there something that I can do on the asterisk side to activate this filtering Or there is something that I can do in Kamailio so it will forward the realip ? contactdeny=0.0.0.0/0.0.0.0 contactpermit=145.72.23.45/32 contactpermit=5.12.16.2/32 Thanks in advance,

1 0

Nagios NRPE Plugin for Kamailio 5.x
by Angelo Sipper 08 Oct '21

08 Oct '21

Hi, I would like to monitor kamailio via our nagios. Is there any working plugin available for nagios nrpe to monitor shared memory and some other config variables for kamailio 5.x that someone has used and could suggest? Kind regards, Angelo

2 1

update max_while_loops in config
by Juha Heinanen 08 Oct '21

08 Oct '21

It is possible to update value of max_while_loops dynamically in config file? For example, there could be a need to increase the max in some while loop, but after the loop is done, decrease it again for other loops. There exists an rpc command to do that, but I haven't found how to do it in config file. I tried @cfg_seti.core.max_while_loops = 200; but got syntax error. -- Juha

3 6

Suspend INVITE between ip4 and ip6 users
by Péter Barabás 08 Oct '21

08 Oct '21

Hi, I try to modify the kamailio configuration to work between ipv4 and ipv6 clients. Clients are mobile sofphones, so they are mostly in background without registration. 1. When an INVITE arrives from IPV4 address, transaction is suspended and a push notification is sent to callee. 2. Callee gets push notification and registers to kamailio. 3. INVITE transaction continues. My kamailio config is based on this article: https://kb.asipto.com/kamailio:kamailio-mixed-ipv4-ipv6 using rtpengine. If clients are in foreground it works fine. But, when a client is in background, kamailio knows nothing about the callee’s IP address (ipv4 or ipv6). The problematic case is the call from IPV4 to IPV6. In this case the FLB_V4V6 flag is missing at continue, since in IPV4V6 route it cannot be set and the rtpengine tries the IPV4->IPV4 case. From the other side IPV6->IPV6. It is understandable, since FLB_V4V6 flag is missing in this case. My question is: where and when should I set this flag? Thanks. Peter

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users