sr-users

sr-users@lists.kamailio.org

11 participants
37462 discussions

[OpenSER-Users] INVITE issue - 483 Too Many Hops
by Eloi Pecharroman 18 Mar '08

18 Mar '08

Hello all, I have an issue with my OpenSER setup. I am struggling to fix it and to find further information. I am working with the debian package 1.3.0-tls Registration (with and without authentication works fine), however, when a client sends an INVITE, it seems to be looping back the request until the max-forward is reached and hence returning the error. The log throws out an insane amount of *repeated* requests. My configuration file is the standard one, I have only added a few xlogs to see if the uri matched my alias, which strangely seems to do as "URI is not mine" is never output. alias=sipserver [....] if(uri!=myself) { xlog("L_NOTICE","URI is not mine\n"); route(1); exit; } [...] route[1] { # send it out now; use stateful forwarding as it works reliably # even for UDP2TCP if (!t_relay()) { sl_reply_error(); }; exit; } Eloi epecharroman(a)aptx.com

2 1

Re: [OpenSER-Users] openser msilo problem
by Daniel-Constantin Mierla 18 Mar '08

18 Mar '08

Hello, seems that you authenticate the MESSAGEs sent by msilo -- filter out these ones, the source IP should be localhost. Cheers, Daniel On 03/18/08 11:49, Devesh wrote: > Hi Daniel, > Thanks for your reply. > I am not able to grep any message because this utility is not on my machine. > I am sending you MSILO log.(attached) > Please guide me where I am wrong. > > > Thanks & Regards > Devesh Bissa > persistent system ltd. > > > > -----Original Message----- > From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] > Sent: Tuesday, March 18, 2008 2:30 PM > To: Deveshb > Cc: users(a)lists.openser.org > Subject: Re: [OpenSER-Users] openser msilo problem > > Hello, > > On 03/14/08 16:17, Deveshb wrote: > >> Hi, >> I have install openser with msilo module . Offline messages stored >> > there > >> but it's not deliver to client( I am using X-Lite). >> it gives me following error >> DBG:maxfwd:is_maxfwd_present: max_forwards header not found! >> DBG:uri:has_totag: no totag >> DBG:tm:t_lookup_request: start searching: hash=3841, isACK=0 >> DBG:tm:matching_3261: RFC3261 transaction matching failed >> DBG:tm:t_lookup_request: no transaction found >> >> > these are not errors, are debug messages. > > Grab the SIP traffic for this case and and send here, that will show > where the message is delivered. Sample command: > > ngrep -d any -qt -W byline port 5060 > > Cheers, > Daniel > > > > >> Could you please help me . >> >> Thank you >> Devesh >> >> > > DISCLAIMER > ========== > This e-mail may contain privileged and confidential information which is the property of Persistent Systems Ltd. It is intended only for the use of the individual or entity to which it is addressed. If you are not the intended recipient, you are not authorized to read, retain, copy, print, distribute or use this message. If you have received this communication in error, please notify the sender and delete all copies of this message. Persistent Systems Ltd. does not accept any liability for virus infected mails. >

1 0

[OpenSER-Users] interconnect with another operator trough sip
by Ion Minzu 18 Mar '08

18 Mar '08

Hi, The architecture looks like this: PSTN <-> AS5300 <-> openser(non_tls) <-> IP-PBX's (asterisk) ^ ^ ^ billing^ (radius) i want to interconnect with another operator trough sip. i think about two methods: -using AS5300 -directly to openser. what method do you recommend for me? and how do you think it's resonable to instal another openser with tls wich will function like session border controller for interconnections with operators through sip. The goal is to not change the architecture of billing and existing SIP proxy. i've read something on the sipforum but i am interested if someone has some experience in such cases, taking into consideration that fact that operators use different equipment that supports sip. i mean that i want in result something like this: | | PSTN <-|-> AS5300 <-> | ^ openser(non_tls) <-> IP-PBX's (asterisk) SIP <-|-> openser<-> ^ | ^ ^ | ^ billing^ (radius)

2 1

[OpenSER-Users] PAI-Question
by Helmut Kuper 18 Mar '08

18 Mar '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, is there a way to access two or more P-Asserted-Identity header field directly with PVs? The only way I found to do is via $(hdr(P-Asserted-Identity)[N]). I ask because of performance ... regards helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFH3rA+4tZeNddg3dwRAl6xAJ4p4Tv+ih+m46yWB6GRUZuU1wS/8wCaAlOY DtCykNG42Im8cyhVQ1jn2RE= =tKfw -----END PGP SIGNATURE-----

4 3

[OpenSER-Users] openser msilo problem
by Deveshb 18 Mar '08

18 Mar '08

Hi, I have install openser with msilo module . Offline messages stored there but it's not deliver to client( I am using X-Lite). it gives me following error DBG:maxfwd:is_maxfwd_present: max_forwards header not found! DBG:uri:has_totag: no totag DBG:tm:t_lookup_request: start searching: hash=3841, isACK=0 DBG:tm:matching_3261: RFC3261 transaction matching failed DBG:tm:t_lookup_request: no transaction found Could you please help me . Thank you Devesh -- View this message in context: http://www.nabble.com/openser-msilo-problem-tp16048145p16048145.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

2 1

[OpenSER-Users] Error openser + freeradius
by MagoDaViola 18 Mar '08

18 Mar '08

Untitled DocumentHi. I´m using a server with OpenSER + MySql FreeRadius + + MediaProxy, and it´s working well, but whenever I get this error: / Usr / local / sbin / openser [2610]: ERROR: auth_radius: radius_authorize_sterman: rc_auth failed All customers are authenticated and holding calls. What can that be? Alcindo Schleder.

2 1

[Serusers] ser_ctl and PostgreSQL backend
by Marcus Better 18 Mar '08

18 Mar '08

Hi, I'm trying to use SER 2.0 (daily snapshot) with a PostgreSQL backend, and have a few problems. What is the status of PostgreSQL support in SER? I created the schema with the ser_postgres script. That didn't populate the version table, so I had to do that manually. Now I need to add a domain with ser_ctl, but get this: ERROR: argument of AND must be type boolean, not type integer STATEMENT: SELECT did FROM domain WHERE 1 AND (NOT ((flags & 128)!='0')) AND (did='example.org') LIMIT 1 Is there another way to create domain entries, or should I switch to MySQL? Regards, Marcus Better

3 3

[OpenSER-Users] Your Industry profile
by VOIP Expert 18 Mar '08

18 Mar '08

1 0

[OpenSER-Users] Your Industry profile
by VOIP Expert 18 Mar '08

18 Mar '08

1 0

[OpenSER-Users] Relaying to outbound proxy
by Adrian A 17 Mar '08

17 Mar '08

Hi, I'm setting up multiple OpenSER proxies in different locations to server a SIP domain. The proxies use a shared location database so they always know where to send requests to the client when an incoming call hits either one. The clients have the outbound proxy set to whichever one is closest to them. The problem is that because the clients are NAT they do not receive the request if the proxy IP that sends it is not the same as the one they have set as the outbound proxy. The NAT will reject the request because it does not arrive from the same IP that the connection was established to. How can I make OpenSER relay requests to the "home proxy" of the user so that this can then forward it to the client? I have added an "ob_proxy" column to the subscriber table and tried using avp_db_load to get this value for use in a t_relay() but I'm getting errors in OpenSER. With the following config: modparam("avpops","avp_url","mysql://user:pass@localhost/openser") modparam("avpops", "avp_table", "dummy") modparam("avpops","db_scheme", "scheme1:username_col=username;value_col=ob_proxy;table=subscriber") avp_db_load("$to","$avp(s:ob_proxy)/subscriber"); I'm getting errors in Openser log: /usr/local/sbin/openser[15470]: ERROR:mysql:db_mysql_submit_query: driver error: Unknown column 'value' in 'field list' /usr/local/sbin/openser[15470]: ERROR:mysql:db_mysql_query: error while submitting query /usr/local/sbin/openser[15470]: ERROR:avpops:ops_dbload_avps: db_load failed Does anyone know how to fix this or is there a better way of doing it?

3 8

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users