sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

[Serusers] good news for German ser fans: book
by Jiri Kuthan 09 Apr '08

09 Apr '08

I got today this book on my desk, courtesy of one of its authors. https://www.opensourcepress.de/index.php?26&backPID=178&tt_products=194 Whereas I was busy with a bunch of unrelated things, the book was circulating in the iptel office all day and has found its keen readers. Unfortunately still only in German lanugage. -jiri

5 5

[Serusers] select for canonical username (alias)?
by Stefan Sayer 09 Apr '08

09 Apr '08

Hello, is there a select to get the canonical username? or is 'canonical username' now a deprecated concept? I know there is the uid, but the problem is, with 36 characters uid is too long for my purpose (user id for voicebox). thanks Stefan -- Stefan Sayer VoIP Services stefan.sayer(a)iptego.com www.iptego.com iptego GmbH Am Borsigturm 40 13507 Berlin Germany Amtsgericht Charlottenburg, HRB 101010 Geschaeftsfuehrer: Alexander Hoffmann

3 3

[Serusers] about URI request
by liu york 09 Apr '08

09 Apr '08

hi i want to distribute tow alieas users use different pstn gw with same area code. i add below in my cfg.but it doesnt work.any advice for me ? many many thx. if (uri=~"^sip:0060.*@(my\.test\.com)"){ strip(2); prefix("21"); rewritehostport("1.2.3.4:5060"); # This is where PSTN Gateway installed route(1); return; }; if (uri=~"^sip:0060.*@(your\.test\.com)"){ strip(2); prefix("22"); rewritehostport("5.6.7.8:5060"); # This is where PSTN Gateway installed route(1); return; };

2 1

[OpenSER-Users] Invalid cseq for aor - OpenSER stuck?
by Adrian A 09 Apr '08

09 Apr '08

I am running OpenSER 1.3.1 on a Debian 4.0 system. It seems that there's some sort of bug with OpenSER getting stuck and stops processing requests at least once a day. The logs only show the following line repeated every minute: ERROR:registrar:update_contacts: invalid cseq for aor <1302> At 1302 is a Cisco 7905 phone running the latest firmware. If I restart OpenSER then things get back to normal. Does anyone know what the problem might be?

2 2

[Serusers] SER 0.9.7-pre3 and DNS SRV
by Steven C. Blair 09 Apr '08

09 Apr '08

I have a SER 0.9.7-pre3 system which is working fine except for call transfers. It turns out that when the NOTIFY is sent after the REFER method the proxy performs a queried for only A records not SRV. This results in an IP address being returned which is a non-SIP host. This is because the domain name is being used by different services some of which use A records for resolving the name and some, like SIP, are suppose to use SRV. How can I make this version of SER perform an SRV lookup instead of an A record lookup when initiating SIP messages? Thanks, Steve

1 1

[OpenSER-Users] OpenSer and sip calls
by kriko 09 Apr '08

09 Apr '08

Hi! I'm trying to get openser working properly - it starts up, I can even regiter from softphone (linphone / twinkle) but I cannot make calls. OpenSer is running on 10.99.8.103:5060 (this is my machine, IP is bound to eth0), when I try to call to e.g.: sip:demovoice@10.99.8.48 I get some errors as in this log: http://files.myopera.com/kriko/code/openser.tar.gz Configuration is included too. Softphone clients are properly configured - it is the proxy that is causing me problems. Any kind of information is appreciated. -- kriko

2 1

[OpenSER-Users] Thoughts on openSER + Asterisk scenarios
by Gabriel Ortiz Lour 09 Apr '08

09 Apr '08

Hi all, We are working here on a solution for a large scale VoIP system to cover our entire state, using both openSER and Asterisk. The project is on an initial stage, basically deciding architecture, so I would like to share our thoughts here in the mailing list and hopefully get some feedback to get starting on the right foot. We have our own private network (internet only on a further first step, no NAT), and we think about two possible scenarios: 1: The SIP accounts would register on the local Asterisk and those would talk to a SER core to connect them all, something like "Asterisk: Oh! this account is not mine so I'll send it to the core to take care for me" and the SER core would try to reach the other endpoint or return some error code. 2: All SIP accounts would be registered on the SER core, using the local asterisk servers as mediaservers and backup SIP proxies, where the SIP accounts would be registering on them only when there is some problem on the link with the SER core (and here they would have to have their own local PSTN gateways) This is the two basic ideas, so we would like to have any thoughts about the "pros and cons" of them. We have also planned many PSTN gateways that would be used for LCR (making all PSTN calls = local) for the entire system, that should be considered on a failure event. Thanks, Gabriel Ortiz PS.: Any help/thoughts are very welcome, as we will share all the experience and development on this project with the FOSS community. We are a government IT company from Paraná, Brasil aligned with the Free Software movement, and the aim is to document and package every aspect of this project.

1 0

Re: [OpenSER-Users] [openser 1.3] loading module auth.so stop my server (bug?!)
by Pascal Maugeri 09 Apr '08

09 Apr '08

I'm still troubleshooting this issue and this morning I added more outputs in the source code of auth_mod.c. And I discovered: 1) when I set the configuration parameter "secret" of the module auth (modparam("auth", "secret", "secretphrase) ) in openser.cfg everything works fine ! 2) when I remove the configuration parameter "secret", the auth_mod.c calls the method generate_random_secret() as stated in the documentation. It enters in the loop for(i = 0; i < RAND_SECRET_LEN; i++) { LM_INFO("(3a)\n"); sec_rand[i] = 32 + (int)(95.0 * rand() / (RAND_MAX + 1.0)); } LM_INFO("(4)\n"); but never exit ! This is the reason why my server does not start and keeps blocked there. I modified the code above to print more logs, I can see in the logs the string (3a) once but I never (4): IMHO it is blocked somewhere in the first random computation. I'm running openser on Redhat Enterprise v4. Is there anything else I should configure in my environment ? Or I found a bug ? Regards, Pascal On Tue, Apr 1, 2008 at 12:45 PM, Pascal Maugeri <pascal.maugeri1(a)gmail.com> wrote: > Hi > > I'm still unable to have a working server 1.3 that loads the module > auth.so. > > It is weird because there is no error message in my log file also I set > the debug level to maximum. But after starting the openser service, it says > it is successful but there is no running process (pgrep openser does not > show anything, when it does if I remove the load auth.so)! > > How can I get more debugging info about the loading and initialization of > auth ? > > Can anybody share with me his or her configuration file ? I may miss > something in mine: > loadmodule "sl.so" > [...] > loadmodule "auth.so" > (I believe it is sufficient). > > Is there any known issue using Redhat Enterprise 4 ? > > Regards, > Pascal > > >

3 4

Re: [OpenSER-Users] Specifying IP Address for SIP Responses
by Bogdan-Andrei Iancu 09 Apr '08

09 Apr '08

Hi Victor, if a UAC wants to have asymmetric signalling, just send from IP_A:PORT_A and put in top most via IP_B:PORT_B - via is used for routing back the reply. regards, Bogdan Victor Cartes wrote: > Thanks, Iñaki. But It is not what I really need. > > I need to send to an UAS a SIP Request, like OPTIONS, and tell it to > send the reply to a different transport address (IP Addr + Port) than > the source address of the request. > > This is, basically, in order to perform NAT discovering and typing > from the server. > > Thanks in advance, > > Víctor > > > > > 2008/4/7, Victor Cartes <ietf.sip(a)tivatechnologies.com > <mailto:ietf.sip@tivatechnologies.com>>: > > Actually not. What I need the UAS exactly to do is to send the SIP > reply to a different IP address than the source of the SIP Request > that it is replying to. Just how it sends the replies to the UDP > port specified in top most Via HF. > > > 2008/4/7, Bogdan-Andrei Iancu <bogdan(a)voice-system.ro > <mailto:bogdan@voice-system.ro>>: > > Hi Victor, > > Not sure I got your question correctly, but you mean like > something like "received" via param used to route back the > replies? > > Regards, > Bogdan > > Victor Cartes wrote: > > Hello to all, > > About SIP/UDP: Is there any way to specify the IP address > for SIP responses, in a similar fashion as port specified > on top most Via HF? > > Thanks in advance, > > Víctor > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > > >

3 3

[OpenSER-Users] Sametime
by r007b17 09 Apr '08

09 Apr '08

Hi all, i have a lotus sametime server (SIP) and a Jabber server (XMPP). Is it possible messaging with each other using xmpp Module ? Thanks in advance. ____________________________________________________________________________________ You rock. That's why Blockbuster's offering you one month of Blockbuster Total Access, No Cost. http://tc.deals.yahoo.com/tc/blockbuster/text5.com

2 3

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users