sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

[OpenSER-Users] PUA/PUA_MI: More than one Publish sent
by Schumann Sebastian 17 Apr '08

17 Apr '08

Dear all I am using OpenSER 1.3.1 branch release R3936. I face some bad behaviour using pua and pua_mi modules. I publish presence states via the management interface. Sometimes, it happens that multiple PUBLISH message are sent by one request. Unfortunately, there is no "system" or oder when this occurs. It just happens after some publications. In case of an expiration (Expires=0, E-Tag .) it is not that bad, I receive the log message: ERROR:presence:update_presentity: No E_Tag match. In case of publication (Expires=-1, E-Tag .) it is very bad: After publication, he receives also two similar messages, and threats both PUBLISH messages as two different ones. Thus, creates two different presentity entries with different E-Tags. If the state is expired now via MI (Expires: -1, E-Tag .) only one of the E-Tags is removed. The second stays in the presentity table and the user still appears online. Any ideas what can be the reason and how to solve it? Best regards Sebastian

2 6

[OpenSER-Users] Can't start usrloc using mysql connection (mysql:db_mysql_new_connection: driver error: Can't connect to MySQL server on ...)
by Pascal Maugeri 17 Apr '08

17 Apr '08

Hi I have the following error in connection with MySQL when I enable usrloc to use the DB (db_mode=1): [...] Apr 17 14:05:48 [32444] DBG:mysql:db_mysql_init: connection 'mysql:// openser:openserrw@192.168.1.4/openser' not found in pool Apr 17 14:05:48 [32444] DBG:mysql:db_mysql_new_connection: opening connection: mysql://xxxx:xxxx@192.168.1.4/openser Apr 17 14:05:48 [32444] ERROR:mysql:db_mysql_new_connection: driver error: Can't connect to MySQL server on '192.168.1.4' (111) Apr 17 14:05:48 [32444] ERROR:usrloc:register_udomain: failed to open database connection Apr 17 14:05:48 [32444] ERROR:registrar:domain_fixup: failed to register domain Apr 17 14:05:48 [32444] ERROR:core:fix_actions: fixing failed (code=-1) at cfg line 323 [...] My configuration file is: loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" [...] # ----- usrloc params ----- modparam("usrloc", "db_mode", 1) modparam("usrloc", "db_url", "mysql://openser:openserrw@192.168.1.4/openser ") I see that mysql server is started and I've managed at installation to create the openser DB (using openserdbctl create). Could you help me doing the troubleshooting of this ? What else should I verify ? Regards, Pascal

2 3

Re: [OpenSER-Users] Can't start usrloc using mysql connection (mysql:db_mysql_new_connection: driver error: Can't connect to MySQL server on ...)
by Bogdan-Andrei Iancu 17 Apr '08

17 Apr '08

There are parameters that should point to the same DB as both openser and openserctl should operate on the same DB. Regards, Bogdan Pascal Maugeri wrote: > You're right Bogdan, I changed my configuration to connect to localhost: > > modparam("usrloc", "db_url", > "mysql://openser:openserrw@localhost/openser") > > Thanks for your prompt reply ! > > Now it works very well. > > just for curiosity, is it important that the DBHOST in the file > openserctl file match the host used in openser.cfg for db_url ? Are > these two parameters independent ? > > Regards, > Pascal > > > > > > > > > On Thu, Apr 17, 2008 at 2:32 PM, Bogdan-Andrei Iancu > <bogdan(a)voice-system.ro <mailto:bogdan@voice-system.ro>> wrote: > > Hi Pascal, > > try to connect with the mysql client (mysql) from the openser > machine to the mysql server machine and see if it works. > > Maybe your mysql server is not configured to listen on 192.168.1.4 > <http://192.168.1.4>, but only on 127.0.0.1 <http://127.0.0.1> > (for local connections). > > Regards, > Bogdan > > Pascal Maugeri wrote: > > Hi > I have the following error in connection with MySQL when I > enable usrloc to use the DB (db_mode=1): > > [...] > Apr 17 14:05:48 [32444] DBG:mysql:db_mysql_init: connection > 'mysql://openser:openserrw@192.168.1.4/openser > <http://openser:openserrw@192.168.1.4/openser> > <http://openser:openserrw@192.168.1.4/openser>' not found in pool > Apr 17 14:05:48 [32444] DBG:mysql:db_mysql_new_connection: > opening connection: mysql://xxxx:xxxx@192.168.1.4/openser > <http://xxxx:xxxx@192.168.1.4/openser> > <http://xxxx:xxxx@192.168.1.4/openser> > Apr 17 14:05:48 [32444] ERROR:mysql:db_mysql_new_connection: > driver error: Can't connect to MySQL server on '192.168.1.4 > <http://192.168.1.4> <http://192.168.1.4>' (111) > > Apr 17 14:05:48 [32444] ERROR:usrloc:register_udomain: failed > to open database connection > Apr 17 14:05:48 [32444] ERROR:registrar:domain_fixup: failed > to register domain > Apr 17 14:05:48 [32444] ERROR:core:fix_actions: fixing failed > (code=-1) at cfg line 323 > [...] > > My configuration file is: > > loadmodule "mysql.so" > loadmodule "sl.so" > loadmodule "tm.so" > loadmodule "rr.so" > loadmodule "maxfwd.so" > loadmodule "usrloc.so" > [...] > > # ----- usrloc params ----- > modparam("usrloc", "db_mode", 1) > modparam("usrloc", "db_url", > "mysql://openser:openserrw@192.168.1.4/openser > <http://openser:openserrw@192.168.1.4/openser> > <http://openser:openserrw@192.168.1.4/openser>") > > > I see that mysql server is started and I've managed at > installation to create the openser DB (using openserdbctl create). > > Could you help me doing the troubleshooting of this ? What > else should I verify ? > > Regards, > Pascal > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.openser.org <mailto:Users@lists.openser.org> > http://lists.openser.org/cgi-bin/mailman/listinfo/users > > > >

1 0

[OpenSER-Users] global variables
by Hugo Koblmueller 17 Apr '08

17 Apr '08

high.*! just wondering if there is any possibility to use global variables in openser.cfg? like e.g. for configuration values, constants, .. another question: how can i access the configuration paramerters like "debug", "port", etc. thx & cheers -hugo

3 4

[OpenSER-Users] carrierroute seg fault
by Helmut Kuper 17 Apr '08

17 Apr '08

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I have "seg-fault" with carrierroute module: openser: svnrevision: 2:4013M on a 64 bit machine running CENTOS5 - -------------------------------------------------- openser-config: [..] loadmodule "carrierroute.so" modparam("carrierroute", "config_file", "/opt/app/voip/openser/etc/openser/carrierroute.conf2") [..] if(!cr_route("default", "0", "$rU", "$rU", "call_id")) { ... } - ----------------------------------------------------- carrierroute.conf2: domain 0 { ~ prefix +49441 ~ { ~ max_targets = 1 ~ target y.y.z ~ { ~ prob = 0.500000 ~ hash_index = 1 ~ status = 1 ~ comment = "GK-Proxy" ~ } ~ } } - ---------------------------------------------------- openser console: [...] Apr 17 10:54:50 [27937] INFO:carrierroute:add_carrier_tree: carrier default not found, add it Apr 17 10:54:50 [27937] INFO:carrierroute:add_tree: tree default has internal id 0 Apr 17 10:54:50 [27937] INFO:carrierroute:add_carrier_tree: created carrier tree: default, with id 1 and 1 trees Apr 17 10:54:50 [27937] INFO:carrierroute:load_config: loading domain 0 Apr 17 10:54:50 [27937] INFO:carrierroute:load_config: loading prefix 49441 Apr 17 10:54:50 [27937] INFO:carrierroute:load_config: loading target y.y.z Apr 17 10:54:50 [27937] INFO:carrierroute:load_config: adding route for prefix 49441, to host y.y.z, prob 0.500000, backed up: 0, backup: -1 Apr 17 10:54:50 [27937] INFO:carrierroute:add_route: adding prefix 49441, prob 0.500000 Apr 17 10:54:50 [27937] INFO:carrierroute:get_route_tree: domain 0 not found, add it Apr 17 10:54:50 [27937] INFO:carrierroute:add_domain: domain 0 has id 0 Apr 17 10:54:50 [27937] INFO:carrierroute:add_route_tree: tree default has 1 trees Apr 17 10:54:50 [27937] INFO:carrierroute:get_route_tree: created route tree: 0, with id 0 Apr 17 10:54:50 [27937] INFO:carrierroute:add_route: found route, now adding Apr 17 10:54:50 [27937] INFO:carrierroute:add_route_rule: no backed up rules Apr 17 10:54:50 [27937] INFO:carrierroute:rule_fixup: fixing tree 0 Apr 17 10:54:50 [27937] INFO:carrierroute:rule_fixup_recursor: rule with host y.y.z hash has hashindex 1. Apr 17 10:54:50 [27937] INFO:carrierroute:mod_init: module initialized, pid [27937] Apr 17 10:54:50 [27937] ERROR:core:pv_parse_spec: bad parameters Apr 17 10:54:50 [27937] INFO:carrierroute:carrier_fixup: carrier tree default has id 1 Apr 17 10:54:50 [27937] ERROR:core:pv_parse_spec: bad parameters [...] - --------------------------------------------- The seg-fault: Apr 17 10:57:20 [28437] DBG:carrierroute:get_route_tree_by_id: searching in carrier default, id 1 Apr 17 10:57:20 [28437] DBG:carrierroute:get_route_tree_by_id: tree default, domain 0 : 0 Segmentation fault (core dumped) Number in $rU was "+49441234" Any ideas? Helmut -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.8 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkgHFfIACgkQ4tZeNddg3dx90wCfTms/1qSzzJtmGLUQUdUt81hH KCIAni+f23WQBeJTt5BRMVuJ1YtzEwKM =CCVU -----END PGP SIGNATURE-----

2 7

[OpenSER-Users] dispatcher and auto reload of previously failed GWs
by Miroslav HOSTINSKY 17 Apr '08

17 Apr '08

Hello all, I have problem with dispatcher module in openser 1.3.1 I am not able to correctly setup scenario when failed GWs will be automatically reloaded back by openser, when they will be available. My openser.cfg: -- mpath = "/usr/lib/openser/modules" debug = 3 fork = no log_stderror = yes children = 2 check_via = no dns = off rev_dns = off port = 5060 loadmodule "maxfwd.so" loadmodule "sl.so" loadmodule "tm.so" modparam("tm", "fr_timer", 5) loadmodule "xlog.so" loadmodule "avpops.so" loadmodule "textops.so" loadmodule "dispatcher.so" modparam("dispatcher", "list_file", "/etc/openser/dispatcher.list") modparam("dispatcher", "flags", 2) modparam("dispatcher", "force_dst", 1) modparam("dispatcher", "dst_avp", "$avp(i:271)") modparam("dispatcher", "grp_avp", "$avp(i:272)") modparam("dispatcher", "cnt_avp", "$avp(i:273)") modparam("dispatcher", "ds_ping_method", "OPTIONS") modparam("dispatcher", "ds_ping_interval", 5) modparam("dispatcher", "ds_ping_from", "sip:proxy@192.168.245.201") modparam("dispatcher", "ds_probing_threshhold", 3) ######################################################################## # Request route 'main' ######################################################################## route { if ( method=="INVITE" || method=="ACK" || method=="BYE" || method=="OPTIONS" ) { ds_select_dst("1","0"); t_on_failure("1"); t_relay(); exit; } } failure_route[1] { if (t_check_status("408")) { xlog("L_INFO","Marking GW as failed...\n"); ds_mark_dst(); ds_next_dst(); t_on_failure("1"); t_relay(); } else{ t_reply("501","Not Implemented"); } } -- According to dispatcher readme file, this config should be sufficient (I think :)), but there is no OPTIONS generated by openser to the failed gateways. Removing of failed GWs works perfectly for me... Could someone help what is wrong with my config? Thanks.

2 2

[OpenSER-Users] Openser can not load LDAP module
by Ahmed Huraimel 17 Apr '08

17 Apr '08

Hello, I am running Openser 1.3.X with MySQL authentiocation and i decided to LDAP instead of MySQL. I did the following: - Reconfigated the Makefile and i took ldap from openser Makefile in (exclude_modules?=) in order to include LDAP module ls /usr/local/lib/openser/modules/ acc.so benchmark.so diversion.so gflags.so mangler.so mysql.so pike.so speeddial.so uac.so alias_db.so cfgutils.so domainpolicy.so group.so maxfwd.so nathelper.so registrar.so sst.so uri_db.so auth_db.so db_berkeley.so domain.so h350.so mediaproxy.so options.so rr.so statistics.so uri.so auth_diameter.so dbtext.so enum.so imc.so mi_datagram.so path.so siptrace.so textops.so usrloc.so auth.so dialog.so exec.so lcr.so mi_fifo.so pdt.so sl.so tm.so xlog.so avpops.so dispatcher.so flatstore.so ldap.so msilo.so permissions.so sms.so uac_redirect.so - then i added the module in openser.cfg (loadmodule "ldap.so") - When i compile the configuration file i get the following: ERROR:core:sr_load_module: could not open module </usr/local/lib/openser/modules/ldap.so>: /usr/local/lib/openser/modules/ldap.so: undefined symbol: ber_pvt_opt_on Apr 16 17:26:45 [8172] CRITICAL:core:yyerror: parse error in config file, line 83, column 13-14: failed to load module i have no idea from where to start or what to check. can anybody help me? Ahmed ALALI

2 1

[OpenSER-Users] NAT SIP OPTIONS ping
by Amit Nagpal 17 Apr '08

17 Apr '08

Hi, I am trying to configure OpenSER such that it pings its NATed clients with SIP OPTIONS packets instead of the default dummy UDP pings. But, no matter what I do, OpenSER always sends the usual UDP pings. My openser.cfg contains the following lines - sipping_bflag sipping_method sipping_from

3 4

[Serusers] Stability 2.1
by Martin Hoffmann 16 Apr '08

16 Apr '08

Hi, we have a bit of an issue with TCP handling in SER 2.0. It appears that dead connections cause the executing TCP process to hang for a short while until it figures things out. Too many such requests and processing essentially stops. Now, I understand all of this has been fixed in SER 2.1 and all our problems will go away. Question is: Will we get new ones by upgrading. Or asked differently: Is there any experience with SER 2.1 and its statbility in a real world scenario? The boxes in question are edge proxies, so there is not much processing to be done other than basic forwarding and a bit of NAT handling. Can we risk it? Best regards, Martin

2 1

Re: [OpenSER-Users] Failure route after parallel forking (was "Problem with redirection (302 Moved temporarly)")
by Antonio Reale 16 Apr '08

16 Apr '08

Sorry for resuming the post.. I can't understand how to handle failure messages after parallel forking. I need a particular configuration or OpenSER must handle them the same way of a single message? I'm using OpenSER 1.2.3-tls and also using debug mode I can't see nothing special. Thanks. Regards, Antonio. 2008/4/15, Antonio Reale <ant.reale(a)gmail.com>: > > Hi all, > I have a Linksys SPA2102 with 2 phones configured with the same > account/number. If I call that number both phones ring and all is OK. > The problem is that if I set a call forwarding on one of the two line on > the SPA only one phone rings. > Openser receives the 302 message from the SPA but the failure route that > contains t_check_status("302") is not called. > The forwarding works if only one line is connected. > How can I handle the 302 in this situation? > Thanks in advance. > > Regards, > Antonio. >

3 5

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users