sr-users

sr-users@lists.kamailio.org

13 participants
37464 discussions

[OpenSER-Users] Openser Mediaproxy
by Abdul 21 Apr '08

21 Apr '08

Hi friends, I was trying to install Openser and Mediaproxy. but when i am starting media proxy using /etc/init.d/mediaproxy star I am getting some error in syslog. Jan 22 12:18:27 hatifserver4 mediaproxy[14707]: warning: accounting is enabled but the accounting module is missing. accounting is not available! Jan 22 12:18:27 hatifserver4 mediaproxy[14707]: Listening for commands on local socket `/var/run/mediaproxy.sock' Jan 22 12:18:27 hatifserver4 mediaproxy[14707]: Listening for remote commands on `212.XXXXXXXXXXXXXx:25060' Jan 22 12:18:27 hatifserver4 mediaproxy[14707]: Remote commands are allowed from: 212.XXXXXXXXXXXXXXXXXX, 127.0.0.1 Jan 22 12:18:27 hatifserver4 mediaproxy[14707]: Using IP address `XXXXXXXXXXXXX' for the RTP/RTCP proxy Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: Traceback (most recent call last): Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: File "/usr/local/mediaproxy/proxydispatcher.py", line 65, in <module> Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: import dispatcher Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: File "/usr/local/mediaproxy/modules/dispatcher.py", line 39, in <module> Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: from accounting import accounting, StopRecordSerializer, UnserializeError Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: File "/usr/local/mediaproxy/modules/accounting.py", line 17, in <module> Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: from radius import * Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: File "/usr/local/mediaproxy/modules/radius.py", line 10, in <module> Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: import pyrad.client Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: ImportError Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: : Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: No module named pyrad.client Jan 22 12:18:27 hatifserver4 proxydispatcher[14710]: exiting. this is our Mediaproxy.ini file i am not using any kind of accounting or radius in INI file but i don't kow why it is shwoing accounting is enable [Dispatcher] start = yes socket = /var/run/proxydispatcher.sock group = openser defaultProxy = /var/run/mediaproxy.sock [MediaProxy] start = yes socket = /var/run/mediaproxy.sock group = openser listen = XXXXXXXXXXXXXx allow = XXXXXXXXXXXXXXXXXXXXXXXXxx proxyIP = XXXXXXXXXXXXXXXXXXXXXX portRange = 20000:65000 TOS = 0xb8 idleTimeout = 60 holdTimeout = 3600 forceClose = 0 accounting = none [Accounting] accounting = none --------------------------------- Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.

3 2

[OpenSER-Users] removing openser
by Robert McNaught 21 Apr '08

21 Apr '08

Hi, I wish to re-compile OpenSER 1.2.3 - I previously had openser 1.1 on the machine and then put on openser.1.2.3 - without a make uninstall command, how is it possible to recompile. Using the command 'openser -V' gives me the correct version, however, when I try and recompile it does nothing and says openser is up to date. I tried removing /usr/local/lib/openser to see if that would make it re-compile. Does anyone know how to get it to re-compile and start from scratch when it is already on the machine? Thanks Robert McNaught

3 3

[OpenSER-Users] kagoor voiceflow replacement
by Robert McNaught 21 Apr '08

21 Apr '08

Hi, Has anyone replaced the functionality of a kagoor voiceflow session border controller with openser? and is it possible? TIA Robert

6 16

[Serusers] how can we setup ser to route invite packet?
by Jun Yin 21 Apr '08

21 Apr '08

Hi, My enviroment is like this: phone1---proxy1-----proxy2-----phone2. phone1 register to proxy1, and phone2 register to proxy2, now I initiate call from phone1 to phone2, I noticed that phone1 just resolved proxy2's domain by itself and send invite to proxy2 directly, everything works fine. My question is : How can I force phone1 to send invite to proxy1 and then let proxy1 to route that invite packet to proxy2? Actually, I hope all packet between phone1 and phone2 can go through proxy1 and proxy2, include RTP. This behaviour was determined by phone's configuration or proxy's configuration? I'm using ser 0.9.6 works as proxy and linphonec works as phone. I also tried to use asterisk works as proxy but got same result. Thanks in advance. -- Rgds, Hans Yin Email: hansyin(a)gmail.com MSN: hansyin(a)hotmail.com Skype: hans_yin_vancouver

1 0

[Serusers] How Many Nines?
by Jeremy A 20 Apr '08

20 Apr '08

Hello, I'm looking at a project which requires a higher than normal reliability for a SIP server. The project involves risk-of-life communications. The volume of traffic is quite low. I have been using SER in embedded applications for some time now without problems but I am now looking at a larger scale project. Assuming I can provide hardware server(s) with suitable characteristics, then : - How reliable is SER? - In each version? - In each module? Are there any well established high availability configurations for SER? Are there any risk-of-life deployments I can reference? We may well use SEMS for part of the project so the same questions apply. I'm not expecting 100% reliability, just a system that matches or exceeds present high reliability PABX deployments. If you are of the honest opinion that SER is not good enough, what SIP server products should I be looking at? Or is SIP not suitable full stop? Thanks in advance Jeremy

2 1

[OpenSER-Users] Error when using avp_db_load: "avpops:dbrow2avp: wrong field types in dbrow"
by Noel R. Morais 19 Apr '08

19 Apr '08

Hi all, I'm trying to load some attributes from DB to an avp and check if the value is greater than 0 (zero). I'm trying to limit the max sessions per user@domain. But when I execute "avp_db_load(..)" I get the error: "avpops:dbrow2avp: wrong field types in dbrow". I'm using unixodbc with oracle as DBRMs. The table DDL is: UUID(VARCHAR2), USERNAME(VARCHAR2), DOMAIN(VARCHAR2), ATTRIBUTE(VARCHAR2), VALUE(VARCHAR2), TYPE(NUMBER) Follow bellow the source: if (method == "REGISTER") { if ( avp_db_load("$fu","$avp(s:maxsessions)/avp_user_attributes") && avp_check("$avp(s:maxsessions)", "gt/0/g") ) { save("location") ; return; } else { sl_send_reply("503", "Service Unavailable"); return; } } I've checked the AVP source and the field types seems to be ok. I don't what to do. Thanks in advance, Noel ps: Sorry about the poor English

2 3

[OpenSER-Users] Radius with additional parameters
by Alex Massover 19 Apr '08

19 Apr '08

Hello! I see how I can receive additional parameters from Radius server via AVPs. But I wonder if it's possible to send additional parameters (headers) to Radius server in requests? For example I want to pass to Radius server P-Asserted header, in case that I need validate it? -- Best Regards, Alex Massover VoIP Development Manager Jajah Inc.

3 2

[OpenSER-Users] kagoor voiceflow replacement
by Robert McNaught 18 Apr '08

18 Apr '08

Klaus, Broadworks is from Broadsoft and is a service provider platform for hosted VoIP and uses SIP http://www.broadsoft.com Robert

2 1

[OpenSER-Users] mi_datagram module bind failure
by Sigrid Thijs 18 Apr '08

18 Apr '08

Hi, we're setting up OpenSER 1.3.0 on a FreeBSD system, with the mi_datagram module configured, and when we start up openser, we get the following error: /usr/local/sbin/openser[3139]: NOTICE presence:child_init: init_child [1] pid [3139] /usr/local/sbin/openser[3138]: ERROR:mi_datagram:mi_init_datagram_server: bind: Invalid argument /usr/local/sbin/openser[3142]: NOTICE presence:child_init: init_child [4] pid [3142] /usr/local/sbin/openser[3138]: CRITICAL:mi_datagram:pre_datagram_process: function mi_init_datagram_server returned with error!!! /usr/local/sbin/openser[3138]: ERROR:core:start_module_procs: pre-fork function failed for process "MI Datagram" in module mi_datagram In the openser configuration: modparam ("mi_datagram", "socket_name", "udp:[ip.add.ress.here]:5068") We checked that the port is not in use. Note that this is working fine when running the same openser version on a linux based system. We are also not having this issue when we specify a UNIX socket. Do you have any idea what could be wrong? kind regards, Sigrid

3 6

[OpenSER-Users] Openser xmpp module configuration problem
by Gaoqiang Qian 18 Apr '08

18 Apr '08

Hi, I have now running a openser server 1.1.0 notls and have installed another openser 1.3.1 with xmpp module configured as the server-mode. Could you tell me how could I change my main sip server(openser 1.1.0 notls) configuation to configure it send sip message to the xmpp gw. Or is there anyway that I could just have one openser server(1.2.x above) along with xmpp module installed. And have it configured as SIP server + XMPP server + SIP-to-XMPP gateway? Could you show me some configuration example to achieve this if possible? Thanks in advance. BR, -- Gaoqiang Qian Automation System and Technology Helsinki University Of Technology GSM: +358415058138

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users