sr-users

sr-users@lists.kamailio.org

46 participants
37553 discussions

Debian kamailio.init vs. kamailio.service
by Juha Heinanen 04 Feb '22

04 Feb '22

By comparing pkg/kamailio/deb/bullseye dir kamailio.init and kamailio.service files, it appears to me that they are not equal alternatives. Is this correct interpretation? -- Juha

1 0

Homer7 and Kamailio 5.3
by Angelo Sipper 03 Feb '22

03 Feb '22

Hi to all, We have a Kamailio 5.3 that sends all traffic to a homer7 using siptrace module with parameters force_send_sock and hep_mode_on,1 and hep_version,3 and trace_mode,1. Everything works fine getting all traffic to Homer7 but, in case Homer7 is not reachable, Kamailio then no longer accepts traffic or registrations and it is like it crashes. When we revive Homer7 and is it again reachable accepting traffic, Kamailio then works again fine without any restart or actions. Any ideas why this may be happening? Is there anything we need to add to the config to avoid this behavior as having Homer7 now is a single point of failure for Kamailio? Thank you! Kind Regards, Angelo

6 11

uac problem with 5.3.8
by Richard Robson 03 Feb '22

03 Feb '22

we have been running 5.3.4 with the uac_auth_mode() function ans it has been working we have upgraded to 5.3.8 and with the same script we are getting an error with the uac module saying it was unable to find the cmd auc_auth_mode I have tried this with uac_auth as well with the same result. it looks like the uac module is not loaded or is not loading but running a core.modules reports the uac module can anyone shed any light on this problem? is it a version pecific problem?

3 4

Updating $du for uac REGISTERs in event_route[tm:local-request]
by Raffaella Seuß 03 Feb '22

03 Feb '22

Hello all, I tried to update $du for REGISTERs sent by the uac module in event_route[tm:local-request]. (I want to overwrite the auth_proxy under some conditions.) However, the requests are still sent to the auth_proxy defined in uacreg. Am I missing something here, why doesn't it work? It's basically just: event_route[tm:local-request] { if (is_method("REGISTER")) { # ... $du = "sip:PROXY_IP:PROXY_PORT"; } } My Kamailio version is 5.5.2. With kind regards, Raffaella Seuß foncloud GmbH & Co KG Hahlweg 2a 36093 Künzell Tel: / Fax: +49 661 968990-99 Email: raffaella.seuss(a)foncloud.net Web: www.foncloud.net P.S.: Wussten Sie schon? Unter https://www.foncloud.net/wissen finden Sie zahlreiche Informationen und hilfreiche Artikel rund um unsere Produkte und Services. Registergericht: Amtsgericht Fulda, Persönlich haftende Gesellschafterin der foncloud GmbH&Co.KG: Global Brain Network GmbHGeschäftsführer der Global Brain Network GmbH: Peter Krug Sitz der Gesellschaft: Künzell. Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet. This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorised copying, disclosure or distribution of the material in this e-mail is strictly forbidden.

1 0

Siremis configuration
by Tim Mastarone 02 Feb '22

02 Feb '22

Hi, I am using Siremis v 5.3 with kamailio. My users can log into the Siremis site just fine but the field to enter their email address is not appearing. My sql queries seem to be working besides that. Does this feature need to be enabled? I would like to use email to confirm the user login with a confirmation code. (mysql Ver 15.1 Distrib 10.1.48-MariaDB, for debian-linux-gnu (x86_64) using readline 5.2) Thank you, [cid:image001.png@01D81830.52C21EA0]<http://www.vikingelectronics.com/> TIM MASTARONE Associate Engineer 715-386-8861 x208 vikingelectronics.com<http://www.vikingelectronics.com/>

1 0

two SIP proxies
by Uwe Sigleur 31 Jan '22

31 Jan '22

2 1

tel2sip is giving unpredictable result
by Jyoti Bansal 31 Jan '22

31 Jan '22

hello, we are using kamailio 5.3 . while establishing a call the tel uri is getting converted into sip uri sometimes incorrectly . In the sip uri some extra characters are getting appended in the invite message. Can somebody please provide some guidance on this, attaching the pcap for reference(packet no. 8). Thanks, *Jyoti Bansal* Software Engineer . Great Software Laboratory | www.gslab.com -- Confidentiality Notice and Disclaimer: This email (including any attachments) contains information that may be confidential, privileged and/or copyrighted. If you are not the intended recipient, please notify the sender immediately and destroy this email. Any unauthorized use of the contents of this email in any manner whatsoever, is strictly prohibited. If improper activity is suspected, all available information may be used by the sender for possible disciplinary action, prosecution, civil claim or any remedy or lawful purpose. Email transmission cannot be guaranteed to be secure or error-free, as information could be intercepted, lost, arrive late, or contain viruses. The sender is not liable whatsoever for damage resulting from the opening of this message and/or the use of the information contained in this message and/or attachments. Expressions in this email cannot be treated as opined by the sender company management – they are solely expressed by the sender unless authorized.

2 1

kamailio log dialog correlation
by marek 31 Jan '22

31 Jan '22

hi, is it possible create log of SIP dialog like https://wiki.asterisk.org/wiki/display/AST/Unique+Call-ID+Logging ? it looks like its possible like this xlog("L_INFO", "D$dlg(h_id) something to log \n"); but i must copy $dlg(h_id) in every xlog tried this modparam("xlog", "prefix", "D$dlg(h_id)") but it not works with variables any other tips/ideas? goal is to correlate logs for one dialog (call) thanks Marek

7 16

31 Jan '22

Hi there, I have a weird issue with kamailio (latest docker image kamailio-ci:5.5.2-alpine) and http_async_client. Before posting a lot of logs, let me describe what I want to achieve. I have a Kamailio and a SIP Phone. The SIP phone sends a REGISTER to kamailio, then in my routing block, I check if I have an Authorization header. Since I don't have an Authorization (first message), I use "www_challenge()". This replies to the SIP phone, and then the SIP phone sends a new REGISTER with the correct Authorization header. So far so good. Now, when I get the REGISTER with Authorization header, I want to ask an HTTP endpoint if this user is allowed to connect and check the password using http_async_query(). The problem is that when the transaction resumes, the tmx module is unhappy and throws this error : 30(36) CRITICAL: tmx [t_var.c:546]: pv_get_tm_reply_code(): no picked branch (-1) for a final response in MODE_ONFAILURE And a 500 error is sent back to the sip phone. The AUTH_REPLY route is still called and I can use the $http* values. It seems that my AUTH_REPLY route is called but considered as a "failure_route" 19(27) exec: *** cfgtrace:dbg_cfg_trace(): failure_route=[AUTH_REPLY] c=[/etc/kamailio/kamailio.cfg] l=665 a=16 n=if 17(23) NOTICE: <script>: [AUTH_REPLY] FAILURE ROUTE If I remove the http_async_client and try with route(AUTH_REPLY) then it is considered as request_route (but this is not a solution since I need to do this http request) Do you see something that I am doing wrong or missing in my logic? Is pausing/resuming to use the async http client is allowed if I'm handling a REGISTER transaction? Here's a simplified version of my routing block (not far from reality): ##### SNIP request_route{ route(AUTH); route[AUTH]{ if (is_method("REGISTER"){ if(no_auth_header){ www_challenge("$td","1"); exit; } else{ t_newtran(); http_async_query("http://xxx.xxx.xxx.xxx:9000/auth?foo=bar", "AUTH_REPLY"); } } } route[AUTH_REPLY]{ xlog("L_INFO", "route[HTTP_REPLY]: status $http_rs\n"); if(t_is_failure_route()) { xlog("L_NOTICE", "[AUTH_REPLY] FAILURE ROUTE \n\n"); } } } ##### END SNIP Best regards!

1 1

Use specific expires per User-Agent
by mayamatakeshi 31 Jan '22

31 Jan '22

Hi, I have a requirement to specify a REGISTER max_expires based on the User-Agent. I checked the docs and it seems there is no pseudo-variable or something like that would permit this. I would like to be able to do something like this: if($ua ~= "Some-UA") { $max_expires=100; } else { $max_expires=150; } save("location"); Is there some way to achieve this?

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users