sr-users

sr-users@lists.kamailio.org

37454 discussions

[Kamailio-Users] call for contribution: project logo
by Daniel-Constantin Mierla 05 Aug '08

05 Aug '08

Hello, I already received the first proposal, courtesy of Darren Sessions. You can check at: http://www.kamailio.org/pub/kamailio-logos/ This message is an invitation for all of you to submit proposals for the new project logo. We are aware that the name is not making happy many people out there and we can work to solve it, maybe over the time will not look that bad or just send name suggestions. However, this should not stop you being creative and help the project, in a transitional or definitive state. Looking forward to your contributions. Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

6 5

[Serusers] 2.0 survey
by Jiri Kuthan 05 Aug '08

05 Aug '08

I'm just wondering if folks using the 2.0 have found so far any issue which has not been tracked -- I've been off-line for vacation, IETF and a couple of other trips and began to be uncertain if I might have missed something. Any concerns/issues/comments regarding 2.0 are most welcome, publicly or privately. Thanks a lot -jiri

1 0

[Kamailio-Users] Openser version to run Mediaproxy 2.0
by Nuno Marques 05 Aug '08

05 Aug '08

Hello, I was reading the README file on the download page of Mediaproxy and found this statement: This version of MediaProxy (2.0 or higher) cannot be used in combination with any version of OpenSER older than 1.4 or any components of MediaProxy older than 2.0. You must completely upgrade any previous installation of OpenSER and MediaProxy to these new versions. What i want to ask you is if this is really true because Openser 1.4 (kamailio) isn't available yet... Can i use Mediaproxy 2.0 with Openser 1.3.2 or i need to wait for the Openser 1.4? Thanks in advance, Nuno Marques

2 1

[Kamailio-Users] openser/kamailio meeting in Bucharest, August 11, 2008
by Daniel-Constantin Mierla 05 Aug '08

05 Aug '08

Hello Everybody, as many expressed their intention for an openser/kamailio event in Bucharest, next week, I am going to organize a dinner in a place with nice Romanian beer, wine and food. Seeing the suggestions for the date, I am proposing August 11, 2008 (Monday) -- let me know if you have opinions. Exact hour and place will be sent as soon as I get an idea about number of participants. So far, expressed the intention to participate: - Henning Westerholt, developer and board member - Elena-Ramona Modroiu, developer and board member - Daniel-Constantin Mierla, developer and board member - Michiel ten Hagen - Sebastian Schuman Please write me if you want to attend, I need to know the number of attendants to make the reservation. The event is in the same fashion as the ones happening in Barcelona, Vienna, Berlin, ..., in the past -- everybody pays for its expenses. If you want to have some preamble (might not be same place, but...), you can check some photos from last similar event in Bucharest after the ROSDEV2008 conference: http://www.asipto.com/photos/ROSDEV2008-1-ALBUM/index1.html Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

1 0

Re: [Kamailio-Users] CDRTool: no price showing
by Brian Del Shasta 05 Aug '08

05 Aug '08

David, After double checking, I do seem to be getting E.164 formatted numbers coming from the Cisco datasource, at least for the numbers we care about. Following is an example, you can see that I am able to successfully match a 1800 # as 1800, test (I just can't rate a price to it). id,StartTime,Username,CallerParty,Destination,DestinationId,DestinationName,Duration,Price,Gateway,KBIn,KBOut,Disconnect,Channel,Direction,CallType 1,2008-08-05 08:55:28,,5635833713,2415453,,,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/2:D:2,outgoing,Telephony 2,2008-08-05 08:55:28,,5635833713,2415453,,,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/0:D:1,incoming,Telephony 3,2008-08-05 08:55:11,,6082516000,19206750230,,,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/1:D:22,outgoing,Telephony 4,2008-08-05 08:55:11,,6082516000,19206750230,,,0,,,0,0,0,Normal release,,incoming,VoIP 5,2008-08-05 08:54:37,,6082888583,18004266918,1800,test,0,,208.66.128.72-ISDN-7,0,0,0,Normal release,ISDN 7/1:D:18,outgoing,Telephony On Fri, Aug 1, 2008 at 8:23 PM, David Villasmil < david.villasmil.work(a)gmail.com> wrote: > correct > > On Fri, Aug 1, 2008 at 8:11 PM, Brian Del Shasta <briandelshasta(a)gmail.com > > wrote: > >> Okay, I'm using a Cisco datasource, so I'm assuming that would replace >> OpenSER in the general schema, correct? >> >> _______________________________________________ >> Users mailing list >> Users(a)lists.kamailio.org >> http://lists.kamailio.org/cgi-bin/mailman/listinfo/users >> >> >

1 0

[Kamailio-Users] Problem With SipTrace Module
by Ali Jawad 05 Aug '08

05 Aug '08

Hi I did enable the siptrace module to be able to see SIP packets in TLS mode. Once I did set it up, I could not logon to the server anymore. The log file does not show anything : Aug 5 10:28:21 [30781] DBG:core:init_mod_child: type=PROC_MAIN, rank=0, module=acc Aug 5 10:28:21 [30781] DBG:core:init_mod_child: type=PROC_MAIN, rank=0, module=nathelper Aug 5 10:28:21 [30781] DBG:core:init_mod_child: type=PROC_MAIN, rank=0, module=siptrace Aug 5 10:28:21 [30793] DBG:mysql:db_mysql_new_connection: connection type is xxxxxxx via TCP/IP Aug 5 10:28:21 [30793] DBG:mysql:db_mysql_new_connection: protocol version is 10 Aug 5 10:28:21 [30793] DBG:mysql:db_mysql_new_connection: server version is 5.0.48 Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=xlog Aug 5 10:28:21 [30793] DBG:xlog:child_init: init_child [-4] pid [30793] Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=acc Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=nathelper Aug 5 10:28:21 [30793] DBG:core:init_mod_child: type=PROC_TCP_MAIN, rank=-4, module=siptrace And the server is listening correctly. # ----------------- SIP Trace Info modparam("siptrace", "db_url", "mysql://mysql://openser:xxxxxxxxx@xxxxxxxxxxxx/openser") modparam("siptrace", "trace_on", 1) Regards

2 2

[OpenSER-Users] XMPP/SIP-SIMPLE Problem
by Cesar Troncoso 05 Aug '08

05 Aug '08

Hi everyone, I have a problem with xmpp module. Messages going from xmpp to sip-simple work fine. The problem I have is in the opposite direction (from sip-sipmle to xmpp). If I set fork=no or children=1 in my config file then all messages are sent and received in both directions. This is what I see in the logs: xmpp: invalid content-type 0x300ff xmpp: unable to write to command pipe: Bad file descriptor Any Idea how to overcome this situation? Thanks! Cesar

2 5

[Kamailio-Users] Message authorization via XCAP
by Adrian Georgescu 05 Aug '08

05 Aug '08

I put this on OpenXCAP roadmap. Regards, Adrian Yann Derichard schrieb: > Hi, > > I have already put in place presence via XCAP and now I would like to > add instant messaging to my system so I would like to know if it is > possible to use OpenSER to do MESSAGE authorization via XCAP (using > OpenXCAP). Hmm - interesting question. It would be good to have a generic framework to check SIP requests against privacy rules stored in XCAP server. does anyone have more knowledge about this? regards klaus

1 0

Re: [Kamailio-Users] Debugging Openser v1.4 scripts
by Jim Burke 05 Aug '08

05 Aug '08

Hi Daniel, After a lot of trial and error I have worked it out! The following portion of script causes the error in both 1.3 and 1.4, however not in 1.2. Root cause is that I have not added "" in my case statements. I.e. case 404: should be case "404": The var reply_status is set from PV $rs in a on_reply or on_failure route using $var(reply_status) = $rs;. switch($(var(reply_status))) { case 404: #Not Found xlog("L_INFO", "[$rm] from <$fu> <$si:$sp> to <$tu> Terminating UA Not Found R4\n"); seturi("sip:rva404@domain"); $(avp(early_code)) = "404"; $(avp(early_reason)) = "Not Found!"; append_hf("P-App-name: early_announcement\r\n"); append_hf("P-App-Param: Final-Reply-Code=$(avp(early_code));Final-Reply-Reason=$(avp(early_reason)); "); break; SNIP default: sl_send_reply("$(var(reply_status))","$(var(reply_reason)))"); xlog("L_INFO", "[$rm] from <$fu> <$si:$sp> to <$tu> Default Route 4\n"); exit; break; } Let me know if you consider this a bug and I will open a ticket. Regards, Jim -----Original Message----- From: Jim Burke [mailto:jim@evolutiontel.net] Sent: Saturday, 2 August 2008 11:28 PM To: miconda(a)gmail.com Cc: users(a)lists.kamailio.org Subject: RE: [Kamailio-Users] Debugging Openser v1.4 scripts Hi Daniel, Have been busy, will send yuo the config shortly. For my information how do you plan to find the corrupt line. Is there something in GDB that can help us set a tracepoint and identify it? Regards, Jim -----Original Message----- From: Daniel-Constantin Mierla [mailto:miconda@gmail.com] Sent: Wednesday, 30 July 2008 12:03 AM To: Jim Burke Cc: users(a)lists.kamailio.org Subject: Re: [Kamailio-Users] Debugging Openser v1.4 scripts Hello, On 07/29/08 15:43, Jim Burke wrote: > Hi All, > > We are working to get our script working on Version 1.4 and are having > problems debugging the script. Previously if I saw the following error in > the logs it would highlight the line and colomb numbers were the error > existed. Can someone help out? > > Jul 29 22:29:18 [19064] CRITICAL:core:yyerror: parse error in config file, > line 9459656, column 1-1: syntax error > Jul 29 22:29:18 [19064] CRITICAL:core:yyerror: parse error in config file, > line 9459656, column 1-1: bad command!) > Jul 29 22:29:18 [19064] ERROR:core:main: bad config file (2 errors) > it should still show the line and column where error occurred, but here is something wrong with the line. Can you obfuscate the private details in the config (passwords, ip addresses) and send it to me? Cheers, Daniel > Thanks, > Jim > > ------------------------------------------------------------------------ > > _______________________________________________ > Users mailing list > Users(a)lists.kamailio.org > http://lists.openser.org/cgi-bin/mailman/listinfo/users > -- Daniel-Constantin Mierla http://www.asipto.com

2 1

[Kamailio-Users] Message authorization via XCAP
by Yann Derichard 05 Aug '08

05 Aug '08

Hi, I have already put in place presence via XCAP and now I would like to add instant messaging to my system so I would like to know if it is possible to use OpenSER to do MESSAGE authorization via XCAP (using OpenXCAP). Regards. -- Yann Derichard

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users