sr-users

sr-users@lists.kamailio.org

42 participants
37453 discussions

[Serusers] 404 Not Found
by dwianto dana 11 Aug '08

11 Aug '08

Hi, I tried to use SER openimscore and connect it with sailfin. Tried to register using X-Lite. What I get in the Core is SIP: Status:404 Not Found - destination user not found on this S-CSCF I am using a default user (Alice and Bob),, so it is kinda strange to get this information, user not found. Thanks for the answers given

1 0

[Kamailio-Users] Req for Coments about my config
by Ali Jawad 11 Aug '08

11 Aug '08

Dear All I am working with some developers to create a sip client that supports TLS for me. During the beta stage they created the phone and it sent "sips" packets with transport=tls in the packet. The thing is that I used the sethostport and t_relay to send data to my PSTN gateway that works on UDP but in both cases I was not able to make PSTN calls. The developers created a custom openser.cfg that rewrites sips packets to sip and removes the transport=tls from the packets. How efficient is this ? Is this the typical approach to make a TLS call through Openser where the PSTN gateway does not support TLS ? Please have a look at the config file if you can. http://pastebin.com/m20f7d25a Thanks

2 1

Re: [Kamailio-Users] openser/kamailio meeting in Bucharest, August 11, 2008
by Cesar Troncoso 11 Aug '08

11 Aug '08

Hello! I am also up for a meeting in Bucharest on Monday next week. It will be a good chance to get different points of view about the kamailio/opensips discussion and the way developers and board members think to move forward in the future. Regards, Cesar ------------------------------ Message: 6 Date: Tue, 05 Aug 2008 18:57:50 +0300 From: Daniel-Constantin Mierla <miconda(a)gmail.com> Subject: [Kamailio-Users] openser/kamailio meeting in Bucharest, August 11, 2008 To: users <users(a)lists.kamailio.org>, devel <devel(a)lists.kamailio.org>, business(a)lists.kamailio.org Message-ID: <4898787E.7020602(a)gmail.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Hello Everybody, as many expressed their intention for an openser/kamailio event in Bucharest, next week, I am going to organize a dinner in a place with nice Romanian beer, wine and food. Seeing the suggestions for the date, I am proposing August 11, 2008 (Monday) -- let me know if you have opinions. Exact hour and place will be sent as soon as I get an idea about number of participants. So far, expressed the intention to participate: - Henning Westerholt, developer and board member - Elena-Ramona Modroiu, developer and board member - Daniel-Constantin Mierla, developer and board member - Michiel ten Hagen - Sebastian Schuman Please write me if you want to attend, I need to know the number of attendants to make the reservation. The event is in the same fashion as the ones happening in Barcelona, Vienna, Berlin, ..., in the past -- everybody pays for its expenses. If you want to have some preamble (might not be same place, but...), you can check some photos from last similar event in Bucharest after the ROSDEV2008 conference: http://www.asipto.com/photos/ROSDEV2008-1-ALBUM/index1.html Cheers, Daniel -- Daniel-Constantin Mierla http://www.asipto.com

2 2

[Kamailio-Users] fr_inv_timer issue
by Kaeman Chris 11 Aug '08

11 Aug '08

Hello, We have an fr_inv_timer set to 45 secs. When i make calls to an 800 number, the call hits to the 1st provider on LCR and IVR recording starts asking to hit an option 1,2,3,etc & if the caller dont hit any option and leave the call up to 45 secs. Than fr_inv_timer kills the transaction by sending a CANCEL message and thereby openser forces the call to send it over to the fail over route. Is this correct should it try the call on the failover route because the 1st provider was able to complete the call than why the call went over to the failover route? here as soon as the call switches to the 2nd provider the IVR message starts again from the option 1 leaving the option 3 in the middle of the recording. is this correct? let me know if the query is not clear. Thanks in advance --------------------------------- Unlimited freedom, unlimited storage. Get it now

3 2

[Kamailio-Users] Radius + openser
by Amit Jain 11 Aug '08

11 Aug '08

Hello everyone, I was looking for documentation for Radius AAA + Openser. I tried to google but the links provided are not working. i think since the site has been renamed. Can any provide me document if saved or any other related link. Link to which i was referring . http://openser.org/docs/openser-radius-1.0.x.html Regards, Amit Jain

2 2

[Kamailio-Users] Radius + openser
by Amit Jain 11 Aug '08

11 Aug '08

2 1

[Kamailio-Users] Should really 't_on_branch' remain in serial forking?
by Iñaki Baz Castillo 11 Aug '08

11 Aug '08

Hi, imagine this simple case: -------------------------- route { t_on_branch("1"); t_on_failure("2"); xlog("We are in 'route'"); t_relay("1.1.1.1"); } branch_route[1] { xlog("We are in 'branch_route[1]'"); # do something.... } failure_route[2] { xlog("We are in 'failure_route[2]'"); append_branch(); t_relay("2.2.2.2"); } --------------------------- In case an error occurs when forwarding the request to 1.1.1.1 this would be the screen log output: We are in 'route' We are in 'branch_route[1]' We are in 'failure_route[2]' We are in 'branch_route[1]' This is: branch_route[1] will also be runned **again** after the failure route since it was loaded in the first forward attemp. I really don't know if this is intuitive or not. The only way to "dissable" branch_route[1] in the failure route is by adding: ------------------- failure_route[2] { t_on_branch("2"); # <--- Dissable t_on_branch("1") xlog("We are in 'failure_route[2]'"); append_branch(); t_relay("2.2.2.2"); } branch_route[2] { xlog("We are in 'branch_route[2]'"); # Nothing to do here. # This route is neccesary to dissable t_on_branch("1") } ------------------ This would show: We are in 'route' We are in 'branch_route[1]' We are in 'failure_route[2]' We are in 'branch_route[2]' What about if "t_on_branch" wouldn't remain loaded after a failure route or serial forking? wouldn't be more intuitive to re-enable it explicitely when required? -- Iñaki Baz Castillo

3 4

[Kamailio-Users] Res: serMyAdmin login problem invalid username and/or password
by Flavio Goncalves 10 Aug '08

10 Aug '08

Hi Muhammad, I will check the problem this week and return to you soon. Regards, Flavio ----- Mensagem original ---- De: muhammad akl <muhammad.akl(a)gmail.com> Para: Flavio Goncalves <flavio(a)asteriskguide.com> Cc: users(a)lists.kamailio.org Enviadas: Domingo, 10 de Agosto de 2008 12:44:47 Assunto: Re: [Kamailio-Users] serMyAdmin login problem invalid username and/or password thx Flavio for ur response but i still have another question the main problem with the user "admin@localhost " and password "openserrw" that were created by the openser_mysql.sh is still happening got the same message "invalid username and/or password " but when i removed that account from the subscriber table and used the openser.sql file from sermyadmin i have successfully logged in but after modifying the openser.sql file to match my environment so after that i tried to register with a new account from the home page using register button besides to login button and filled the account's information there everything worked fine but the problem happend here now is when i logged with the "admin@setup" and password "secret " account to approve the new account for users i got this message pastebin.com/m7154020b p.s for alot of testing i have used more than one version of serMyAdmin beginning with ver 0.3 to 0.7 !! sorry for my poor english as am not native BR muhammad

1 0

[Kamailio-Users] Res: serMyAdmin login problem invalid username and/or password
by Flavio Goncalves 10 Aug '08

10 Aug '08

Hi Muhammad, Check the updated procedure at www.sermyadmin.org. The default login is asmin@setup, password secret as stated in the procedure. Flavio E. Goncalves ----- Mensagem original ---- De: muhammad akl <muhammad.akl(a)gmail.com> Para: users(a)lists.kamailio.org Enviadas: Domingo, 10 de Agosto de 2008 6:28:53 Assunto: [Kamailio-Users] serMyAdmin login problem invalid username and/or password hey all i'm trying to configure sermyadmin web interface to administrate openser-1.2.2 through it firstly i installed apache-tomcat and configure it successfully then i downloaded the sermyadmin.war and copied it to /usr/local/tomcat/webapps then downloaded mysql-jdbc and copied it to /usr/local/tomcat/lib also configure the context.xml and modified the Context element and added the user have full privileges to access openser databases then when tried to login with user "admin@locahost" and pass " openserrw" default values created by the openser_mysql.sh i got invalid username or password ? any suggestions ? serMyAdmin version used .7-BETA i also tried the howto found in sermyadmin.org but with no success by trying to use the prepared openser.sql file if anyone could i'd appreciate that

2 1

[Kamailio-Users] How to revert changes in SDP during serial forking?
by Iñaki Baz Castillo 10 Aug '08

10 Aug '08

Hi, I have a scenario in which the call is first forwarded to user location using MediaProxy (so I modify the SDP in OpenSer) and if it gets a error response a failure route forwards the request to a media server with public IP for which I don't need and don't want to use MediaProxy. But since I change the SDP in the first forwarding (to the user) then I can't use the original SDP in the sequential forwarding to the media server. Is possible to do it? Thanks a lot. -- Iñaki Baz Castillo

2 2

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users