sr-users

sr-users@lists.kamailio.org

42 participants
37453 discussions

[Serusers] ser 0.10 doucmentation
by Steven C. Blair 26 Aug '08

26 Aug '08

I was wondering if anyone has documentation on the new syntax used in SER 0.10.x. I see the following in the ser-advanced.cfg example file but I do not see these parameters documented anywhere. Thanks,Steve if ($t.fr_inv_timer) { if ($t.fr_timer) { t_set_fr("$t.fr_inv_timer", "$t.fr_timer"); } else { t_set_fr("$t.fr_inv_timer"); } } Senior Network Engineer, Information Systems and Computing Networking and Telecommunications , Suite 221A /6228 University of Pennsylvania Voice:215-573-8396 FAX:215-898-9348

6 32

[Kamailio-Users] CDRTool not applying rates
by Brian Del Shasta 25 Aug '08

25 Aug '08

I believe my rating tables are configured correctly now thanks to David Villasmil who sent me examples from his working setup. However, I am still unable to see any rates. The rating engine seems to be started and I have no problem identifying and matching calls based on specific criteria. But I still see no rates. I'm wondering if anyone knows the best place to troubleshoot the rating engine would be or if anyone has any other ideas? Thank you in advance, and thanks again David for your help!

3 7

Re: [Kamailio-Users] presence fail
by Ricky Gutierrez 25 Aug '08

25 Aug '08

in this guide, he doesn't have the module presence_xml, but he has the parameter modparam (" presence ", " force_active ", 1) http://www.kamailio.net/dokuwiki/doku.php/presence:configuration-file it is strange, I believe to be seen in the wiki a same example for openser 1.3.2 greetingss rickygm

2 1

Re: [Serusers] call forward no answer (solved)
by caio 25 Aug '08

25 Aug '08

append_branch() is missed at ser examples... On Fri, Aug 15, 2008 at 4:22 PM, caio <elcaio(a)gmail.com> wrote: > Hi all, > I can't make call forwarding on no answer works on my ser-0.9.7 installation. > Here you can see a snippet of log, where the call falls on > failure_route and then to route_1 where t_relay is called. > > Log at: http://rafb.net/p/xwTmn195.html > > The call is from sip:579951 to sip:579915(who has enabled the feature > fwdnoanswer to sip:579916. > But I do not know why the INVITE after the append_branch() is still to > R-URI: sip:579915@.... > > After the relay then the call terminates with: > > Aug 15 16:13:25 [/usr/sbin/ser] SIP Reply (status):_ > Aug 15 16:13:25 [/usr/sbin/ser] version: <SIP/2.0>_ > Aug 15 16:13:25 [/usr/sbin/ser] status: <487>_ > Aug 15 16:13:25 [/usr/sbin/ser] reason: <Request Terminated>_ > > I follow the example of ser guide.., but do not work.. > I would appreciate any comment.. > > Regards, > > -- > caiogf > -- caio

1 0

[Serusers] ser + media server
by caio 25 Aug '08

25 Aug '08

Hi all, What do you recommend for media server application to integrate wih ser-0.9.x? SEM or Asterisk? Specifically i'm talking about running services such as IVR, conference and voicemail.. Thanks your suggestions.. -- caio

1 0

[Kamailio-Users] crashing problem
by Jonathan K. Creasy 25 Aug '08

25 Aug '08

We're using Carrier route with about 53,000 routes stored in a mysql databse. We're getting this crash in production that we never had in the lab. The bt is below. Does anyone have any suggestions? nline static void free_to_params(struct to_body* tb) { struct to_param *tp=tb->param_lst; struct to_param *foo; while (tp){ foo = tp->next; <-- **** Line 75 ***** pkg_free(tp); tp=foo; } } -Jonathan #0 free_to (tb=0x817cf10) at parser/parse_to.c:75 #1 0x080daf70 in clean_hdr_field (hf=0x8a8ee18) at parser/hf.c:182 #2 0x080db05b in free_hdr_field_lst (hf=0x8a905b8) at parser/hf.c:209 #3 0x080db12d in free_sip_msg (msg=0x8193030) at parser/msg_parser.c:660 #4 0x08094695 in receive_msg ( buf=0x8168220 "SIP/2.0 183 Session Progress\r\nf: \"16512552900\"<sip:16512552900@206.80.65.90>;tag=as781b438d\r\nt: <sip:+16513401989@lefty.netlogic.net>;tag=c7ad5f5020080822192510\r\ni: 396fb801653abd6f605a12153e0e3e72@20"..., len=1271, rcv_info=0xbf82f844) at receive.c:206 #5 0x080d3e0d in udp_rcv_loop () at udp_server.c:438 #6 0x0806c8f5 in main (argc=3, argv=0xbf82fa34) at main.c:834 (gdb) backtrace full #0 free_to (tb=0x817cf10) at parser/parse_to.c:75 No locals. #1 0x080daf70 in clean_hdr_field (hf=0x8a8ee18) at parser/hf.c:182 __FUNCTION__ = "clean_hdr_field" #2 0x080db05b in free_hdr_field_lst (hf=0x8a905b8) at parser/hf.c:209 No locals. #3 0x080db12d in free_sip_msg (msg=0x8193030) at parser/msg_parser.c:660 No locals. #4 0x08094695 in receive_msg ( buf=0x8168220 "SIP/2.0 183 Session Progress\r\nf: \"16512552900\"<sip:16512552900@206.80.65.90>;tag=as781b438d\r\nt: <sip:+16513401989@lefty.netlogic.net>;tag=c7ad5f5020080822192510\r\ni: 396fb801653abd6f605a12153e0e3e72@20"..., len=1271, rcv_info=0xbf82f844) at receive.c:206 msg = (struct sip_msg *) 0x8193030 __FUNCTION__ = "receive_msg" #5 0x080d3e0d in udp_rcv_loop () at udp_server.c:438 len = 1271 buf = "SIP/2.0 183 Session Progress\r\nf: \"16512552900\"<sip:16512552900@206.80.65.90>;tag=as781b438d\r\nt: <sip:+16513401989@lefty.netlogic.net>;tag=c7ad5f5020080822192510\r\ni: 396fb801653abd6f605a12153e0e3e72@20"... tmp = <value optimized out> from = (union sockaddr_union *) 0x8a91318 fromlen = 16 ri = {src_ip = {af = 2, len = 4, u = {addrl = {2850040017, 135426432, 3213031528, 3085483479}, addr32 = {2850040017, 135426432, 3213031528, 3085483479}, addr16 = {10449, 43488, 29056, 2066, 63592, 49026, 48599, 47080}, addr = "Ñ(à©\200q\022\bhø\202¿×½è·"}}, dst_ip = {af = 2, len = 4, u = {addrl = {509300942, 0, 0, 0}, addr32 = {509300942, 0, 0, 0}, addr16 = {20686, 7771, 0, 0, 0, 0, 0, 0}, addr = "ÎP[\036", '\0' <repeats 11 times>}}, src_port = 5060, dst_port = 5060, proto = 1, proto_reserved1 = 0, proto_reserved2 = 0, src_su = {s = {sa_family = 2, sa_data = "\023ÄÑ(à©\000\000\000\000\000\000\000"}, sin = {sin_family = 2, sin_port = 50195, sin_addr = {s_addr = 2850040017}, sin_zero = "\000\000\000\000\000\000\000"}, sin6 = {sin6_family = 2, sin6_port = 50195, sin6_flowinfo = 2850040017, sin6_addr = {in6_u = {u6_addr8 = '\0' <repeats 15 times>, u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, u6_addr32 = {0, 0, 0, 0}}}, sin6_scope_id = 0}}, bind_address = 0x818dd90} __FUNCTION__ = "udp_rcv_loop" #6 0x0806c8f5 in main (argc=3, argv=0xbf82fa34) at main.c:834 cfg_log_stderr = 0 cfg_stream = (FILE *) 0xa179008 c = <value optimized out> r = <value optimized out> tmp = 0x8148b9c "ÿÿÿÿ" tmp_len = <value optimized out> port = <value optimized out> proto = <value optimized out> ret = <value optimized out> seed = 639236262 rfd = 4 __FUNCTION__ = "main"

4 9

Re: [Kamailio-Users] Google reference to openser users and devel Archives
by H Quintana 25 Aug '08

25 Aug '08

Hi, My temporary solution was to edit the etc/hosts file in my windows xp machine. The path is: C:\WINDOWS\system32\drivers\etc\hosts And I added the lines: 193.22.119.66 www.openser.org 193.22.119.66 openser.org to point to the Kamailio servers. Hope this helps, Humberto > Subject: Re: [Kamailio-Users] Google reference to openser > users and > devel Archives > To: users(a)lists.kamailio.org > Message-ID: > <200808251326.44077.henning.westerholt(a)1und1.de> > Content-Type: text/plain; charset="utf-8" > > On Friday 15 August 2008, Rafael Risco Gonzales-Vigil > wrote: > > This is for openser/kamailio and opensips list > administrators: > > google still has references to > http://www.openser.org/pipermail/users/ and > > http://www.openser.org/pipermail/devel/ for openser > related searchings and > > those urls does not contains old files anymore so its > dificult search > > information for learning and troubleshooting about > openser/kamailio or > > opensips... I hope someone can solve this issue for > the benefit of all > > current and future community users. > > Hi Rafael, > > we don't have access to the openser.org domain, so > there is nothing what we > can do here, sorry. All access of web and mail services to > openser.org will > go to opensips infrastructure. > > If you encounter such old links with openser.org, you can > simply > change "openser.org" to "kamailio.org", > then you'll be able to access the > content, apart from using the google archives, as Alex > pointed out. > > Cheers, > > Henning >

2 1

[Kamailio-Users] failure route configuration
by Jonathan K. Creasy 25 Aug '08

25 Aug '08

I have this block in my configuration: <excerpt from failure_route[1]> if(!cr_rewrite_uri("1", "call_id")){ t_reply("403", "$fU@$fd Not allowed"); } else { # In case of failure, re-route the request prefix("+"); t_on_failure("2"); if (is_method("INVITE")) t_on_reply("1"); # Relay the request to the gateway t_relay(); } The output in my log file: Aug 18 18:41:29 lab02b /usr/local/sbin/openser[5622]: INFO: carrierroute:carrier_rewrite_msg: uri 8909 was rewritten to sip: 8909@gateway_one Aug 18 18:41:29 lab02b /usr/local/sbin/openser[5626]: INFO: Failure Route Started Aug 18 18:41:29 lab02b /usr/local/sbin/openser[5626]: INFO: carrierroute:carrier_rewrite_msg: uri 8909 was rewritten to sip: 8909@gateway_two Aug 18 18:41:29 lab02b /usr/local/sbin/openser[5626]: ERROR: tm:t_forward_nonack: no branch for forwarding Aug 18 18:41:29 lab02b /usr/local/sbin/openser[5626]: ERROR: tm:w_t_relay: t_forward_nonack failed What am I missing that I need to do prior to calling t_relay()? -Jonathan

6 11

[Kamailio-Users] Google reference to openser users and devel Archives
by Rafael Risco Gonzales-Vigil 25 Aug '08

25 Aug '08

This is for openser/kamailio and opensips list administrators: google still has references to http://www.openser.org/pipermail/users/ and http://www.openser.org/pipermail/devel/ for openser related searchings and those urls does not contains old files anymore so its dificult search information for learning and troubleshooting about openser/kamailio or opensips... I hope someone can solve this issue for the benefit of all current and future community users. rafael Lima - Peru

3 2

[Kamailio-Users] need help on starting opensips v1.4.1
by Do Nguyen Ha 25 Aug '08

25 Aug '08

hi opensips debian:/etc/opensips# /etc/init.d/opensips start Starting opensips: opensipsListening on udp: 127.0.0.1 [127.0.0.1]:5060 udp: 192.168.1.254 [192.168.1.254]:5060 tcp: 127.0.0.1 [127.0.0.1]:5060 tcp: 192.168.1.254 [192.168.1.254]:5060 Aliases: tcp: debian:5060 tcp: localhost:5060 udp: debian:5060 udp: localhost:5060 . debian:/etc/opensips# /etc/init.d/opensips status Status of opensips: opensips is not running. could anyone tell me the tips for this Thanks Ha`

2 1

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users