sr-users

sr-users@lists.kamailio.org

42 participants
37455 discussions

[Kamailio-Users] SST module: Min-SE optional in request
by Schumann Sebastian 09 Oct '08

09 Oct '08

Dear all I might have noticed a bug in SST module: If I send an INVITE with Session-Expires: 300 Supported: timer I get rejected with 422 Session-Timer too small. If a Min-SE: x header with x > set min_se parameter included I do not get the message. This is IMHO wrong behavior, as Min-SE is optional in initial INVITE-requests sent by the phone acc. RFC 4028, table 1. Another thing that I noticed is the response to this message includes the Min-SE header (as it should), but has no linebreak after it (at least in kamailio branch 1.4). The message looks like MIN-SE:120Server: Kamailio (1.4.1-notls (i386/linux)) The phone call cannot be performed. At least one thing is IMHO wrong, as the phone cannot complete the call. It might be wrong the call gets rejected, or the answer might be possible like this, but then the phone cannot extract Min-SE due to wrong format. Any opinions on this? Sebastian

2 5

[Kamailio-Users] !!Urgent Need to setup SIP SERVER like SIP Account Provider as my own Server.Thanks for your very great Help.
by sam 09 Oct '08

09 Oct '08

HI , I want to be a SIP providers like broadvoice gimzo ,where can i get DID numbers ,do we need to have contact with telecommunication Department. Please give me a full details.When we use *kamailio *,then there is no need to get sip account and virtual numbers. -- Cheers K.S.Sampath Kumar

3 2

[Kamailio-Users] Kamailio and Asterisk trunking?
by John D 09 Oct '08

09 Oct '08

Not sure if I'm properly wording this, but I used to have two asterisk servers speaking to each other over SIP, configured via sip.conf. I now need a way to forward calls from my Asterisk instance to my Kamailio server so it can properly distribute the call. At this point however, I cannot find any documentation in order to properly have the two speak to each other. Would anyone be kind enough to point me in the right direction to establish that connection? Thanks.

3 2

[Kamailio-Users] Attended Transfer with asterisk
by ALAEDDINE abbech 08 Oct '08

08 Oct '08

Hello, Does anybody got a working configuration to make an "attended call transfer" with a call through an Asterisk gateway? Example: PSTN --> Asterisk --> SER --+-- A |<---transfer call pstn to B +-- B The call will come from the PSTN Network and will go through "A". A sets the call on "Hold" and calls "B". After A is connected with B, A hangup and B got the call from PSTN. This is not working at the moment. Attended call transfer only with OpenSER and only with SIP-Phones is no Problem. But if the is an Asterisk as PSTN-GW in the game it will not work.

3 4

[Kamailio-Users] ACK without matching transaction discarded
by Alex R.S.M 08 Oct '08

08 Oct '08

Hi, I am using openSER as a proxy for a simple SIP call (UAC <--> openSER <--> UAS). openSER receives ACK from callee but doesn't send it to caller. It seems openSER can not find a matching transaction, so it ignore and discard the message. if ( is_method("ACK") ) { if ( t_check_trans() ) { t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } Here is the message header: Internet Protocol, Src: 10.0.0.174 (10.0.0.174), Dst: 10.0.0.160 (10.0.0.160) ... ACK sip:9134750000@10.0.0.183:5080 SIP/2.0 Via: SIP/2.0/UDP 10.0.0.174:5040;branch=z9hG4bK-12255-1-4 From: <sip:9133750000@10.0.0.174:5040>;tag=1 To: <sip:9134750000@10.0.0.183:5080>;tag=1 Call-ID: 1-12255(a)10.0.0.174 CSeq: 1 ACK Contact: sip:sipp@10.0.0.174:5040 Max-Forwards: 70 Subject: Performance Test Content-Length: 0 Am I missing anything? Thanks, Alex _________________________________________________________________ Want to do more with Windows Live? Learn “10 hidden secrets” from Jamie. http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!5…

2 2

[Kamailio-Users] Ping both UACs when a call starts
by Cesar Troncoso 08 Oct '08

08 Oct '08

Hello! When a call starts I would like OpenSER to ping (by sending OPTIONS or INFO request) both UAC´s just to know if they are still there or for some reason they crashed or lost connectivity. In case they don't response, the call should be finished. What is the best way to do this? Thanks in advance! Cesar

2 3

[Kamailio-Users] openser 1.3.3 domain module
by toly 07 Oct '08

07 Oct '08

Greetings, In domain module, command is_domain_local - using parameter_fixup where there is a call pkg_malloc, but nowhere function free_fixup is used. This will be memory leak, or I'm missing something. Thanks for the prompt reply, Toly -- View this message in context: http://www.nabble.com/openser-1.3.3-domain-module-tp19863638p19863638.html Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

3 3

[Kamailio-Users] LCR to Carrierroute with DNS/SRV Support
by Krom 07 Oct '08

07 Oct '08

Hello, I am/will be a newbie to 1.3.x and beyond and have a question regarding a new requirement of two of my upstream providers. We have been running 1.1.1-notls since it was released. We have been in the mindset of, "if it's not broken, don't fix it". But our upstream providers are now telling us to move to DNS/SRV for signaling outbound - for good reason. We have been using LCR for carrier/gateway selection and for URI manipulation prior to relaying to a cluster of session boarder controllers. As you know the DB table for LCR only supports integers in the gw table for ip_addr. I have been reading up on 1.2.x and 1.3.x to upgrade to a solution that would allow us to stay within the same call processing (script) design, but still support the new upstream requirement. I noticed the carrierroute table rewrite_host column is string. Could this be used to satisfy my needs of manipulating the URI for an IP where the carrier still uses a list of gateway IP's to try and use the DNS/SRV domain name where the carrier requires the use for SRV look-up? The session boarder controllers will conduct the SRV look-up after receiving the relayed message from Kamailio, it is just getting the domain name on the URI instead of IP address that I am looking to accomplish. Will the carrierroute module assist in this effort or is there another way that I am totally missing? Figured I would ask the gurus before following Alice down the rabbit hole. -- Thanks, -- Kyle

3 3

[Kamailio-Users] Can openser.cfg lead to pkg memory problem?
by mayamatakeshi 07 Oct '08

07 Oct '08

Hello, we have openser 1.3.3 running in production (current rev.: 4943). For 3 times in 50 days we had to restart openser to correct pkg memory problem. After some time logging messages like this: /openser.log:Aug 19 10:39:18 ipx022 /usr/local/sbin/openser[16991]: ERROR:core:new_credentials: no pkg memory left, openser will eventually run out of pkg memory and refuse all subsequent requests. We are trying to recreate this in our lab so that we can follow memory troubleshooting instructions at http://kamailio.net/dokuwiki/doku.php/troubleshooting:memory, but so far we were unable to do it even when generating millions of calls and registration transactions (we are using SIPp to generate normal call flows and even abnormal call flows detected when reading openser.log, like 'invalid cseq for aor', malformed SIP messages etc). And this is much more than in our production environment, with just 600 subscribers and about 2000 calls a day. The frequency the problem happens is increasing with the number of subscribers, so we are performing periodic restart of openser (actually, what we do is to switch over to the standby server). We already recompiled openser with pkg memory pool size set to 4MB so that this will not have to be done frequently. Since we cannot recreate this in our lab, we suspect there is a situation happening in production that might not be having been properly handled by openser.cfg. So my question is: would it be possible to an overlooked detail in openser.cfg to cause pkg memory problem? In case someone could take a look at it, here's our cfg file: ####### Global Parameters ######### debug=0 log_stderror=no log_facility=LOG_LOCAL0 fork=yes children=4 /* uncomment the following lines to enable debugging */ #debug=6 #fork=no #log_stderror=yes /* uncomment the next line to disable TCP (default on) */ disable_tcp=yes /* uncomment the next line to enable the auto temporary blacklisting of not available destinations (default disabled) */ #disable_dns_blacklist=no /* uncomment the next line to enable IPv6 lookup after IPv4 dns lookup failures (default disabled) */ #dns_try_ipv6=yes /* uncomment the next line to disable the auto discovery of local aliases based on revers DNS on IPs (default on) */ #auto_aliases=no /* uncomment the following lines to enable TLS support (default off) */ #disable_tls = no #listen = tls:your_IP:5061 #tls_verify_server = 1 #tls_verify_client = 1 #tls_require_client_certificate = 0 #tls_method = TLSv1 #tls_certificate = "/usr/local/etc/openser/tls/user/user-cert.pem" #tls_private_key = "/usr/local/etc/openser/tls/user/user-privkey.pem" #tls_ca_list = "/usr/local/etc/openser/tls/user/user-calist.pem" port=5060 /* uncomment and configure the following line if you want openser to bind on a specific interface/port/proto (default bind on all available) */ #listen=udp:202.173.5.181:5060 ####### Modules Section ######## #set module path mpath="/usr/local/lib/openser/modules/" /* uncomment next line for MySQL DB support */ loadmodule "mysql.so" loadmodule "sl.so" loadmodule "tm.so" loadmodule "rr.so" loadmodule "maxfwd.so" loadmodule "usrloc.so" loadmodule "registrar.so" loadmodule "textops.so" loadmodule "mi_fifo.so" loadmodule "uri_db.so" loadmodule "uri.so" loadmodule "xlog.so" loadmodule "acc.so" loadmodule "carrierroute.so" loadmodule "nathelper.so" loadmodule "dialog.so" loadmodule "snmpstats.so" /* uncomment next lines for MySQL based authentication support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "auth.so" loadmodule "auth_db.so" loadmodule "lcr.so" /* uncomment next line for aliases support NOTE: a DB (like mysql) module must be also loaded */ loadmodule "alias_db.so" /* uncomment next line for multi-domain support NOTE: a DB (like mysql) module must be also loaded NOTE: be sure and enable multi-domain support in all used modules (see "multi-module params" section ) */ loadmodule "domain.so" /* uncomment the next two lines for presence server support NOTE: a DB (like mysql) module must be also loaded */ #loadmodule "presence.so" #loadmodule "presence_xml.so" loadmodule "uac.so" loadmodule "avpops.so" # ----------------- setting module-specific parameters --------------- # ----- mi_fifo params ----- modparam("mi_fifo", "fifo_name", "/tmp/openser_fifo") # ----- rr params ----- # add value to ;lr param to cope with most of the UAs modparam("rr", "enable_full_lr", 1) # do not append from tag to the RR (no need for this script) modparam("rr", "append_fromtag", 1) # ----- rr params ----- modparam("registrar", "method_filtering", 1) /* uncomment the next line to disable parallel forking via location */ # modparam("registrar", "append_branches", 0) /* uncomment the next line not to allow more than 10 contacts per AOR */ modparam("registrar", "max_contacts", 10) modparam("registrar", "min_expires", 30) modparam("registrar", "max_expires", 40) modparam("registrar", "default_expires", 35) # ----- uri_db params ----- /* by default we disable the DB support in the module as we do not need it in this configuration */ modparam("uri_db", "use_uri_table", 0) modparam("uri_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("uri_db", "use_domain", 1) # ----- acc params ----- /* what sepcial events should be accounted ? */ modparam("acc", "early_media", 1) modparam("acc", "report_ack", 1) modparam("acc", "report_cancels", 1) /* by default ww do not adjust the direct of the sequential requests. if you enable this parameter, be sure the enable "append_fromtag" in "rr" module */ modparam("acc", "detect_direction", 0) /* account triggers (flags) */ modparam("acc", "failed_transaction_flag", 3) modparam("acc", "log_flag", 1) modparam("acc", "log_missed_flag", 2) /* uncomment the following lines to enable DB accounting also */ modparam("acc", "db_flag", 1) modparam("acc", "db_missed_flag", 2) # ----- usrloc params ----- #modparam("usrloc", "db_mode", 0) /* uncomment the following lines if you want to enable DB persistency for location entries */ modparam("usrloc", "db_mode", 2) modparam("usrloc", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("usrloc", "use_domain", 1) # ----- auth_db params ----- /* uncomment the following lines if you want to enable the DB based authentication */ modparam("auth_db", "calculate_ha1", yes) modparam("auth_db", "password_column", "password") modparam("auth_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("auth_db", "load_credentials", "$avp(s:rpid)=rpid;$avp(s:blocked)=subscriber_status") # ----- alias_db params ----- /* uncomment the following lines if you want to enable the DB based aliases */ modparam("alias_db", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("alias_db", "use_domain", 0) # ----- domain params ----- /* uncomment the following lines to enable multi-domain detection support */ modparam("domain", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("domain", "db_mode", 1) # Use caching # ----- multi-module params ----- /* uncomment the following line if you want to enable multi-domain support in the modules (dafault off) */ #modparam("alias_db|auth_db|usrloc|uri_db", "use_domain", 1) # ----- presence params ----- /* uncomment the following lines if you want to enable presence */ #modparam("presence|presence_xml", "db_url", # "mysql://openser:openserrw@localhost/openser") #modparam("presence_xml", "force_active", 1) #modparam("presence", "server_address", "sip:192.168.1.2:5060") # ----- carrieroute params ----- modparam("carrierroute", "db_url", "mysql://openser:openserrw@localhost /openser") modparam("carrierroute", "config_source", "db") modparam("carrierroute", "use_domain", 1) # ----- NatHelper ----- #para versao a partir da versao 1.2 eh necessario esse paramtro para nao dar erro qdo usa a funcao "fix_nated_register();" modparam("nathelper|registrar", "received_avp", "$avp(i:42)") modparam("nathelper", "rtpproxy_sock", "udp:127.0.0.1:22222") # ----- LCR ----- modparam("lcr", "db_url", "mysql://openser:openserrw@localhost/openser") modparam("lcr|tm", "fr_inv_timer_avp", "$avp(i:704)") modparam("lcr", "gw_uri_avp", "$avp(i:709)") modparam("^auth$|lcr", "rpid_avp", "$avp(i:302)") modparam("lcr", "contact_avp", "$avp(i:711)") modparam("lcr", "ruri_user_avp", "$avp(i:500)") modparam("lcr", "dm_flag", 25) # ----- Dialog ---- modparam("dialog", "dlg_flag", 4) # ----- SnmpStat ----- modparam("snmpstats", "sipEntityType", "registrarServer") modparam("snmpstats", "sipEntityType", "proxyServer") modparam("snmpstats", "MsgQueueMinorThreshold", 2000) modparam("snmpstats", "MsgQueueMajorThreshold", 5000) modparam("snmpstats", "dlg_minor_threshold", 500) modparam("snmpstats", "dlg_major_threshold", 750) modparam("snmpstats", "snmpgetPath","/usr/bin/") modparam("snmpstats", "snmpCommunity","public") ####### Routing Logic ######## # main request routing logic route{ if (!mf_process_maxfwd_header("10")) { sl_send_reply("483","Too Many Hops"); exit; } ##nat route(2); if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { if (is_method("BYE")) { setflag(1); # do accouting ... setflag(3); # ... even if the transaction fails } route(1); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(2); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server #t_relay(); #exit; route(1); } else { # ACK without matching transaction ... ignore and discard.\n"); exit; } } sl_send_reply("404","Not here"); } exit; } #initial requests setflag(4); #for dialog statistics # CANCEL processing if (is_method("CANCEL")) { if (t_check_trans()) route(1); # t_relay(); # exit; } #t_check_trans(); if (is_method("PUBLISH|SUBSCRIBE|REFER|OPTIONS|MESSAGE")) { sl_send_reply("405", "Method not allowed"); exit; } # authenticate if from local subscriber (uncomment to enable auth) if (!(method=="REGISTER") && (!from_gw())) { if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!check_from()) { sl_send_reply("403","Forbidden auth ID"); exit; }else if (avp_check("$avp(s:blocked)", "eq/0")) { sl_send_reply("603","Subscriber disabled"); exit; }else if (avp_check("$avp(s:blocked)", "eq/1")) { sl_send_reply("603","Subscriber with outgoing blocked"); exit; } consume_credentials(); # caller authenticated } # record routing if (!is_method("REGISTER|MESSAGE")) record_route(); # account only INVITEs if (is_method("INVITE")) { setflag(1); # do accouting } if (is_method("REGISTER")) { # authenticate the REGISTER requests (uncomment to enable auth) if (!proxy_authorize("", "subscriber")) { proxy_challenge("", "0"); exit; } if (!check_to()) { sl_send_reply("403","Forbidden auth ID"); exit; }else if (avp_check("$avp(s:blocked)", "eq/0")) { sl_send_reply("403","Subscriber disabled"); exit; } if (!save("location")) sl_reply_error(); exit; } if ($rU==NULL) { # request with no Username in RURI sl_send_reply("484","Address Incomplete"); exit; } # apply DB based aliases (uncomment to enable) ##alias_db_lookup("dbaliases"); #if the call came from a known gateway it is not authenticated and we cannot use the function check_from() if (from_gw()) { route(4); }else if (!check_from()) {#if the check_from() returns false the call is not from a subscriber route(4); } else {#it is a subscriber, route using flip domain xlog("L_INFO", "routing using carrierroute $rm to $ru\n"); if (!cr_user_rewrite_uri("$fu", "flip")) { t_newtran(); t_reply("404", "No Route"); exit; } #replaces from by it's default DID uac_replace_from("sip:$avp(s:rpid)@$fd"); } # when routing via usrloc, log the missed calls also setflag(2); route(1); } route[1] { xlog("L_INFO", "ROUTE_1 $rm to $ru\n"); if (subst_uri('/(sip:.*);nat=yes/\1/')) { setflag(6); }; if (isflagset(5)||isflagset(6)) { route(3); } if (!t_relay()) { sl_reply_error(); }; exit; } route[2] { xlog("L_INFO", "ROUTE_2 $rm to $ru\n"); if (method=="REGISTER") { fix_nated_register(); } else if (!from_gw()){ fix_nated_contact(); }; setflag(5); } route[3] { xlog("L_INFO", "ROUTE_3 $rm to $ru\n"); if (is_method("BYE|CANCEL")) { unforce_rtp_proxy(); } else if (is_method("INVITE")) { xlog("L_INFO", "FORCE RTP w/ parameter.\n"); force_rtp_proxy("r"); t_on_failure("1"); }; if (isflagset(5)) search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); t_on_reply("1"); } route[4] { xlog("L_INFO", "uri does exist $rm to $ru \n"); if (alias_db_lookup("dbaliases")){ if (!lookup("location")) { switch ($retcode) { case -1: t_newtran(); t_reply("404", "Subscriber not online"); exit; case -2: sl_send_reply("405", "Method Not Allowed"); exit; } } }else{#check if did is blocked $rU = "(BLK)" + $rU; if (alias_db_lookup("dbaliases")){ sl_send_reply("403", "DID blocked"); exit; }else{# if it is not a valid DID nor a blocked DID tries to route it using peering domain if (!cr_rewrite_uri("peering", "call_id")) { t_newtran(); t_reply("404", "Peering Not Found"); exit; } } } } failure_route[1] { xlog("L_INFO", "FAILURE $rm to $ru\n"); if (isflagset(6)||isflagset(5)) { unforce_rtp_proxy(); } } onreply_route[1] { xlog("L_INFO", "ONREPLY_1 - Status $rs from $si $rm .\n"); if (is_method("INVITE")) { if ((isflagset(5)||isflagset(6)) && status=~"(183)|(2[0-9][0-9])") { force_rtp_proxy(); } search_append('Contact:.*sip:[^>[:cntrl:]]*', ';nat=yes'); if (!from_gw()){ #if (isflagset(6)) { xlog("L_INFO", "ONREPLY_1 - ! from gw.\n"); fix_nated_contact(); } exit; } } Regards, takeshi

6 15

Re: [Kamailio-Users] Case Sensitive
by Daniel-Constantin Mierla 07 Oct '08

07 Oct '08

Please cc all the time to mailing lists, so everybody benefits of the outcome or can add comments/suggestions. Also, repeat my question, right now do you need it in some module or for string operations in the config file? Thank you, Daniel On 10/02/08 12:18, michel freiha wrote: > Dear Daniel, > > I prefer doing it in the config file...Is there any function that I > can add and it'll runn the server in case sensitive mode? > > Regards > > On Thu, Oct 2, 2008 at 11:42 AM, Daniel-Constantin Mierla > <miconda(a)gmail.com <mailto:miconda@gmail.com>> wrote: > > Hello, > > > On 10/02/08 11:10, michel freiha wrote: > > Dear All, > I would like to ask please about how to force kamailio to be > case sensitive regarding username? > > similar issue reported on the tracker: > http://sourceforge.net/tracker/index.php?func=detail&aid=2047019&group_id=1… > <http://sourceforge.net/tracker/index.php?func=detail&aid=2047019&group_id=1…> > > I guess it is same for you. Right now, do you need it in some > functions or in config file operations? There is need for special > functions for different comparisons, but also might be good to > have case sensitive operations in config file. > > Cheers, > Daniel > > -- > Daniel-Constantin Mierla > http://www.asipto.com <http://www.asipto.com/> > > -- Daniel-Constantin Mierla http://www.asipto.com

2 7

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users