sr-users

sr-users@lists.kamailio.org

18 participants
37470 discussions

[Kamailio-Users] Kamailio 1.4.3 Carrierroute BYE does not
by unknown＠1.org 19 Feb '09

19 Feb '09

Hello: I have this scenario: I already rad about the bye2bye, the dialog module, i was not able to see any light there. Here is the scenario A--GW--------Kamailio(carrierroute)---------GW1---B |--------------GW2 |--------------GW3 (etc) the capture |<-------------BYE---- -<----NOTHING HERE<<<-| the By does go back if the B user hangs it is not even attempted in the kamailio, per the traces. the BY generates records in the CRD from B side if i hang manually the bye generates CDR records from the A side. Again the Bye is understood by the kamailio and generates the CDR records, that is Not the problem, the Problem is i have the user A in silence, i am talking about the Signaling Only, not Media, no NAT. I even tried the mediaproxy (just trying) the config is like the: http://voipembedded.com/resources/openser_cr.cfg i added if (has_totag()) { # sequential request withing a dialog should # take the path determined by record-routing if (loose_route()) { # mark routing logic in request append_hf("P-hint: rr-enforced\r\n"); if (is_method("BYE")) { setflag(1); # do accounting ... setflag(3); # ... even if the transaction fails exit; } route(10); } else { /* uncomment the following lines if you want to enable presence */ ##if (is_method("SUBSCRIBE") && $rd == "your.server.ip.address") { ## # in-dialog subscribe requests ## route(200); ## exit; ##} if ( is_method("ACK") ) { if ( t_check_trans() ) { # non loose-route, but stateful ACK; must be an ACK after a 487 or e.g. 404 from upstream server t_relay(); exit; } else { # ACK without matching transaction ... ignore and discard.\n"); xlog("L_WARN", "[$mi] discarding ACK\n"); exit; } this is the main difference for now, i changed to use as a basis example the Example 1.45. Configuration example - Routing to user tree. same results. i tried adding the record_route in the invite also, same result. At this point i have no clue what i am missing. Please let me know if this should work or not, and if yes, based in that basic example, what i should add.

2 8

[Kamailio-Users] A2billing Project <-> Openser
by BERGANZ François 18 Feb '09

18 Feb '09

Hello, I use Asterisk2billing to do prepaidit works fine! But, now, I need to auth my users in the openser and forward the call by loadbal to asterisk(s) which use Asterisk2billing. Anybody know how to do? Cordialement, BERGANZ François P Pensez à l'Environnement, n'imprimez ce mail que si nécessaire.

2 14

[Kamailio-Users] SIP-T
by Kaeman Chris 18 Feb '09

18 Feb '09

Hello, Does opensips support SIP-T? Thank you! KC Add more friends to your messenger and enjoy! Go to http://messenger.yahoo.com/invite/

3 3

[Kamailio-Users] SEMS (bugfix) release 1.0.1
by Stefan Sayer 17 Feb '09

17 Feb '09

Hello, The 1.0.1 release of SEMS, the SIP Express Media Server [0], is now available for download [1]. The 1.0.1 release contains all fixes applied to the 1.0 branch, and should be a drop-in replacement for anyone still using 1.0.0. Update is recommended to everyone who is still using 1.0.0-rcX or any later version from the 1.0 branch. Debian packages for etch/64 are also available [2]. Best Stefan Sayer [0] http://iptel.org/sems/ [1] http://ftp.iptel.org/pub/sems/sems-1.0.1.tar.gz [2] http://ftp.iptel.org/pub/sems/1.0/1.0.1/packages/debian Apologies if you receive multiple copies of this message. -- Stefan Sayer VoIP Services stefan.sayer(a)iptego.com www.iptego.com IPTEGO GmbH Wittenbergplatz 1 10789 Berlin Germany Amtsgericht Charlottenburg, HRB 101010 Geschaeftsfuehrer: Alexander Hoffmann

1 0

[Kamailio-Users] minutes for IRC meeting 17.02.2009, release dates
by Henning Westerholt 17 Feb '09

17 Feb '09

Hi all, the minutes for todays IRC meeting are now available in our wiki [1]. Among the discussed topics we decided about a date for the upcoming 1.5.0 release, this is scheduled for the 2th march 2009. The first release that will use the new common sip-router core [2] is scheduled for May. After 1.5.0 we will also do a bug fix release (1.4.4) for our latest stable branch. All dates can be found in our wiki as well at [3]. Cheers, Henning [1]http://www.kamailio.org/dokuwiki/doku.php/development:irc-meeting-minutes… [2]http://sip-router.org/benefits/ [3]http://www.kamailio.org/dokuwiki/doku.php/development:release-policy#date… -- Henning Westerholt - Development Consumer Products / DSL Core 1&1 Internet AG, Ernst-Frey-Str. 9, 76135 Karlsruhe, Germany

1 0

[Kamailio-Users] IRC meeting 17th februar, 15:00 UTC
by Henning Westerholt 17 Feb '09

17 Feb '09

Hi all, as the release cycle for 1.5.0 slowly come to an end, i think its time for a new IRC developer meeting, to focus on the upcoming development. I propose next Tuesday, 17th Feb 15:00 UTC. I've created a wiki page to collect an agenda for this meeting, and already added some content i would like to discuss. Please add your yours also and comment on already existing topics. Agenda: http://www.kamailio.org/dokuwiki/doku.php/development:irc-meeting-agenda-17… IRC meetings page: http://www.kamailio.org/dokuwiki/doku.php/development:irc-meetings Cheers, Henning

2 3

[Serusers] Problem with REGISTER
by buslik 17 Feb '09

17 Feb '09

Hi all, I have just default ser.cfg And it seems that if (uri==myself) never happens. SER trying to relay to <my domain name>:5060 and there my Gigaset C470IP just replies 405 Not Allowed. How to explain to the SER that it has <my domain name>? I have put alias=<my domain name> into my ser.cfg and SIP_DOMAIN=<my domain name> into env. It does no help. How to get any log out of it? -- Slava.

1 0

[Kamailio-Users] Lost
by daniel medina 17 Feb '09

17 Feb '09

Hi everybody, I am trying to set up OpenSer as a Load balancing for Asterisk. I really need to know where to start. Please can anyone give me a hint where to star or if there is any tutorial??? Thanks in advance Daniel

3 2

Re: [Kamailio-Users] ERROR:uac:replace_from
by Daniel-Constantin Mierla 16 Feb '09

16 Feb '09

Are you sure uac_replace_from() was called for initial invite? There has to be a new param (vsf) in the Recor-Route header and it is not there. Cheers, Daniel On 02/16/2009 04:50 PM, BERGANZ François wrote: > No. Time Source Destination Protocol Info > > [...] > > There is no 200OK because, the bye isn't good! > > > Thank you > > > Cordialement, > BERGANZ François > > > http://www.acropolistelecom.net >  Pensez à l'Environnement, n'imprimez ce mail que si nécessaire. > > > -----Message d'origine----- > De : Daniel-Constantin Mierla [mailto:miconda@gmail.com] > Envoyé : lundi 16 février 2009 15:37 > À : BERGANZ François > Cc : users(a)lists.kamailio.org > Objet : Re: [Kamailio-Users] ERROR:uac:replace_from > > > > On 02/16/2009 04:07 PM, BERGANZ François wrote: > >> Now, I have modparam("uac","from_restore_mode","none") >> >> I control everything! Nothing in automatic! >> >> > :-) -- the power in your hands -- as said in the previous email, if you > send me the invite and appropriate 200ok, I can tell whose fault is. > > Cheers, > Daniel > > >> Cordialement, >> BERGANZ François >> >> >> http://www.acropolistelecom.net >>  Pensez à l'Environnement, n'imprimez ce mail que si nécessaire. >> >> -----Message d'origine----- >> De : Daniel-Constantin Mierla [mailto:miconda@gmail.com] >> Envoyé : lundi 16 février 2009 14:07 >> À : BERGANZ François >> Cc : users(a)lists.kamailio.org >> Objet : Re: [Kamailio-Users] ERROR:uac:replace_from >> >> >> >> On 02/16/2009 03:03 PM, BERGANZ François wrote: >> >> >>> Then, if it is automatic: >>> >>> If I change with uac_replace_from() the INVITE, the bye have to be the same ? >>> In my case, it doesn't >>> >>> >>> >> Paste the BYE here, maybe the Route parameter used for auto-update is >> missing... >> >> Cheers, >> Daniel >> >> >> >>> Cordialement, >>> BERGANZ François >>> >>> >>> http://www.acropolistelecom.net >>>  Pensez à l'Environnement, n'imprimez ce mail que si nécessaire. >>> >>> >>> -----Message d'origine----- >>> De : Daniel-Constantin Mierla [mailto:miconda@gmail.com] >>> Envoyé : lundi 16 février 2009 12:39 >>> À : BERGANZ François >>> Cc : users(a)lists.kamailio.org >>> Objet : Re: [Kamailio-Users] ERROR:uac:replace_from >>> >>> >>> >>> On 02/16/2009 01:33 PM, BERGANZ François wrote: >>> >>> >>> >>>> It is for a bye request >>>> >>>> >>>> >>>> >>> BYE is withing dialog (practically ending the dialog). You do not need >>> to replace the From for it. It is done automatically -- see my other post. >>> >>> Cheers, >>> Daniel >>> >>> >>> >>> >>>> Cordialement, >>>> BERGANZ François >>>> >>>> >>>> http://www.acropolistelecom.net >>>>  Pensez à l'Environnement, n'imprimez ce mail que si nécessaire. >>>> >>>> >>>> -----Message d'origine----- >>>> De : Daniel-Constantin Mierla [mailto:miconda@gmail.com] >>>> Envoyé : lundi 16 février 2009 12:25 >>>> À : BERGANZ François >>>> Cc : users(a)lists.kamailio.org >>>> Objet : Re: [Kamailio-Users] ERROR:uac:replace_from >>>> >>>> Hello, >>>> >>>> On 02/16/2009 01:10 PM, BERGANZ François wrote: >>>> >>>> >>>> >>>> >>>>> Hello, >>>>> >>>>> I have an error with uac_replace_from() function. >>>>> >>>>> I want to do uac_replace_from(“$fn”,” sip:181812012@217.64.x.x”); >>>>> >>>>> I have that error: ERROR:uac:replace_from: decline FROM replacing in >>>>> sequential request in auto mode (has TO tag) >>>>> >>>>> Have you an idea? >>>>> >>>>> >>>>> >>>>> >>>>> >>>> you call uac_replace_from() for SIP messages within dialog and the >>>> replace mode is auto (which means is done automatically by kamailio) - >>>> therefore will be a duplicate. >>>> >>>> Either check for to-tag when you do the replacement or set replace mode >>>> to manual. >>>> >>>> Cheers, >>>> Daniel >>>> >>>> >>>> >>>> >>>> >>> >>> >>> >> >> > > -- Daniel-Constantin Mierla http://www.asipto.com

1 0

[Kamailio-Users] ERROR:uac:replace_from
by BERGANZ François 16 Feb '09

16 Feb '09

Hello, I have an error with uac_replace_from() function. I want to do uac_replace_from($fn, sip:181812012@217.64.x.x); I have that error: ERROR:uac:replace_from: decline FROM replacing in sequential request in auto mode (has TO tag) Have you an idea? Thank you Cordialement, BERGANZ François P Pensez à l'Environnement, n'imprimez ce mail que si nécessaire.

2 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users