sr-users

sr-users@lists.kamailio.org

21 participants
37572 discussions

SR or Kamailio.
by Vicente 09 Nov '09

09 Nov '09

Hi, This is my first message to the list. So, sorry if I say something stupid. I've installed sip-router from GIT repository. It is now compiled and installed. I can see that bins ser, sercmd and ser_mysql.sh has been copied to /usr/local/sbin. ser runs properly but sercmd tries to use /tmp/ser_ctl (ERROR: connect_unix_sock: connect(/tmp/ser_ctl): No such file or directory [2]) while /temp/sip-router_ctl is the socket generated by ser. ser_mysql.sh also fails with error: ./ser_mysql.sh: 326: Bad substitution The INSTALL file on the repository instructs to use serctl utility to watch server health but no binary has been generated with that name. Is it replaced by sercmd? What is the status of sip-router.org? Is it ready for production? Or is it a better option to use Kamailio at the moment? Best regards.

3 3

[Kamailio-Users] How to recognize the caller ID
by Masoom Alam 09 Nov '09

09 Nov '09

Hi Every one, Is the following scenario possible and if yes, how? I want to identify the caller ID inside the Kamailio so that a specific caller can be routed to an Asterisk box. Actually, the caller -- a SIP client or an IP phone client is not registered at Kamailio, but Kamailio has to act as a Proxy to a group of Asterisk servers. The sketch in my mind is to use some if-then-else statements within the [route] where user can call a particular number say NXXXXXXX201 and then the Kamailio can strip off the first number and re-route it to an Asterisk server. Regards, MM Alam SERG Pakistan http://serg.imsciences.edu.pk http://www.imsciences.edu.pk/profiles/masoom_alam.html

3 2

[Serusers] 500 internal error
by Sabatella, Michael 08 Nov '09

08 Nov '09

Hi, I am getting a 500 internal server error. I am not sure why as my config did not change. I do not want to restart the ser proxy. Could I get a list of causes for a 500 server error? Thanks, Michael Sabatella Network Services Engineer Office: 1-201-253-2280 Cell: 1-908-380-5321 ________________________________ DISCLAIMER: This e-mail may contain information that is confidential, privileged or otherwise protected from disclosure. If you are not an intended recipient of this e-mail, do not duplicate or redistribute it by any means. Please delete it and any attachments and notify the sender that you have received it in error. Unintended recipients are prohibited from taking action on the basis of information in this e-mail.E-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be intercepted, deleted or interfered with without the knowledge of the sender or the intended recipient. If you are not comfortable with the risks associated with e-mail messages, you may decide not to use e-mail to communicate with IPC. IPC reserves the right, to the extent and under circumstances permitted by applicable law, to retain, monitor and intercept e-mail messages to and from its systems.

2 3

[Kamailio-Users] A architectural question
by Masoom Alam 08 Nov '09

08 Nov '09

Hi there, Is it possible that Kamailio is used in front of a group of Asterisk servers. That is, Kamailio as a REGISTRAR Translation can proxy the SIP registration and identify which PBX to send on LAN by the ID before the EXT underlined from IP PHONE. Please advise with some links through which it is possible to handle such an architecture. Regards, MM Alam SERG Pakistan http://serg.imsciences.edu.pk http://www.imsciences.edu.pk/profiles/masoom_alam.html

2 2

[Kamailio-Users] OCS?
by Jay R. Worthington 06 Nov '09

06 Nov '09

Hi, has someone managed to "federate" kamailio with an Office Communications Server? I'm mainly looking for IM&Presence (to gate into ejabberd), voice would be nice to have... Regards, Jay

2 1

[Kamailio-Users] routing question
by Andrew Gallo 06 Nov '09

06 Nov '09

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Greetings: Hope you don't mind a question from someone just getting his feet wet :) First off, if I want Kamailio to act as a SIP router among, say, a group of Asterisk PBXs (meaning, Kamailio will have no user registrations, but just pass SIP messages to and from the Asterisks), would I do this in the least cost routing table or in carrier routes table, or via another method? (assume for the moment that all the PBXs are under my control, these aren't connections outside my organization, no connections to the PSTN). I figured it would be with lcr, so I tried compiling 3.0.0RC1 with that module removed from the exclude list. I received the following error on 'make install' make[1]: Entering directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' make[1]: Leaving directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' config.mak included make[1]: Entering directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' gcc -fPIC -DPIC -g -O9 -funroll-loops -Wcast-align -m32 - -minline-all-stringops -falign-loops -ftree-vectorize - -fno-strict-overflow -mtune=athlon64 -Wall -DNAME='"kamailio"' - -DVERSION='"3.0.0-rc1"' -DARCH='"i386"' -DOS='linux_' - -DOS_QUOTED='"linux"' -DCOMPILER='"gcc 4.3.2"' -D__CPU_i386 -D__OS_linux - -DSER_VER=3000000 -DCFG_DIR='"/usr/local/etc/kamailio/"' -DPKG_MALLOC - -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP - -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER - -DUSE_DST_BLACKLIST -DUSE_NAPTR -DDBG_QM_MALLOC -DUSE_TLS -DTLS_HOOKS - -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 - -DCC_GCC_LIKE_ASM -DHAVE_GETHOSTBYNAME2 -DHAVE_UNION_SEMUN - -DHAVE_SCHED_YIELD -DHAVE_MSG_NOSIGNAL -DHAVE_MSGHDR_MSG_CONTROL - -DHAVE_ALLOCA_H -DHAVE_TIMEGM -DHAVE_SCHED_SETSCHEDULER -DHAVE_EPOLL - -DHAVE_SIGIO_RT -DSIGINFO64_WORKARROUND -DUSE_FUTEX -DHAVE_SELECT - -I/usr/local/include -I/usr/local/include -I/opt/include - -I/usr/sfw/include -DOPENSER_MOD_INTERFACE -DMOD_NAME='"lcr"' -c hash.c - -o hash.o In file included from hash.c:26: lcr_mod.h:34:18: error: pcre.h: No such file or directory In file included from hash.c:26: lcr_mod.h:51: error: expected specifier-qualifier-list before âpcreâ hash.c:34: error: expected declaration specifiers or â...â before âpcreâ hash.c: In function âlcr_hash_table_insertâ: hash.c:56: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ hash.c:56: error: âfrom_uri_reâ undeclared (first use in this function) hash.c:56: error: (Each undeclared identifier is reported only once hash.c:56: error: for each function it appears in.) hash.c:58: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:59: error: âstruct lcr_infoâ has no member named âfirst_gwâ hash.c:60: error: âstruct lcr_infoâ has no member named âpriorityâ hash.c:66: error: âstruct lcr_infoâ has no member named ânextâ hash.c: In function âlcr_hash_table_contents_freeâ: hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:106: error: âstruct lcr_infoâ has no member named âgrp_idâ hash.c:107: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ hash.c:108: error: âstruct lcr_infoâ has no member named âfrom_uri_reâ hash.c:110: error: âstruct lcr_infoâ has no member named ânextâ make[1]: *** [hash.o] Error 1 make[1]: Leaving directory `/usr/local/src/kamailio-3.0.0/kamailio/modules/lcr' make: *** [install-modules] Error 1 If I leave lcr in the exclude list, I can make/make install, but if I try to add an entry into the lcr table, I get this error: # kamctl lcr addgw labCM 172.16.59.6 5060 1 2 1 ERROR 1054 (42S22) at line 1: Unknown column 'ping' in 'field list' ERROR: lcr - SQL Error System info: Kamailio 3.0.0 RC1 from GIT debian 5.0.3 (2.6.26-2-686) gcc -v Using built-in specs. Target: i486-linux-gnu Configured with: ../src/configure -v --with-pkgversion='Debian 4.3.2-1.1' --with-bugurl=file:///usr/share/doc/gcc-4.3/README.Bugs - --enable-languages=c,c++,fortran,objc,obj-c++ --prefix=/usr - --enable-shared --with-system-zlib --libexecdir=/usr/lib - --without-included-gettext --enable-threads=posix --enable-nls - --with-gxx-include-dir=/usr/include/c++/4.3 --program-suffix=-4.3 - --enable-clocale=gnu --enable-libstdcxx-debug --enable-objc-gc - --enable-mpfr --enable-targets=all --enable-cld - --enable-checking=release --build=i486-linux-gnu --host=i486-linux-gnu - --target=i486-linux-gnu Thread model: posix gcc version 4.3.2 (Debian 4.3.2-1.1) Thank you! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAkrx/CMACgkQQr/gMVyFYySWQgCeJoW2VLWRI85bHdC9ThwnEwLc pWQAoJZVtBEzdRI8+3xBoLnlWJxNXbj/ =Wwjk -----END PGP SIGNATURE-----

6 13

[Kamailio-Users] Dispatcher module question
by DJB 05 Nov '09

05 Nov '09

Is there a way that I can pass variable into ds_select_dst(set, alg) on the set parameter so I can query from database table for setid; for instance, ds_select_dst("avp(customer_setid)", "4"). I've tried, but it did not work. Please advise. Thank you.

3 5

difference between memlog and memdbg
by Klaus Darilion 05 Nov '09

05 Nov '09

Hi! What's the difference betwenn memlog and memdbg? thanks klaus

2 2

[Kamailio-Users] uac_replace_from check
by jh＠tutpro.com 05 Nov '09

05 Nov '09

if i have understood correctly, if uac_replace_from() is called in "auto" mode, encoded from uri is added into an extra param of r-r header when the request is forwarded towards uas. does the module check that reply to the request from uas really includes the added parameter in its r-r header or is correct operation of in-dialog requests at the mercy of the uas? -- juha

7 37

Re: [Kamailio-Users] LCR problem with "id" column and match priorities
by jh＠tutpro.com 05 Nov '09

05 Nov '09

it turned out that the problems ricardo reported on gw selection in lcr module were due to the fact that he has the same gw (same in terms of ip address) in more than one gw group and in each group the gw has different trip/tag attributes. load_gws() function tries the same gateway only once, but it is not currently well defined from which group gw's attributes are taken when request is sent to the gateway. currently the attributes are taken from the gw group, which happens to be the first in in-memory gw table. one could think that this is a feature, i.e., if the same gw is in many gw groups, it must have the same attributes in every group. the other alternative is that this is a bug, i.e., same gw's attributes can differ from group to group and the ones that are used must be the ones of the chosen group. i have a fix written for sr_3.0 lcr module, but i'm hesitating to introduce the fix also to version 1.5, because the fix has not been tested well yet. any opinions on what should be done? -- juha

3 9

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users