sr-users

sr-users@lists.kamailio.org

18 participants
37470 discussions

Build Error for v3.0.0-rc2 (2009-12-03_3ed668) on Solaris
by Bruce McAlister 03 Dec '09

03 Dec '09

Hi All, I am trying to build Kamailio v3.0.0 RC2 on Solaris 10 (note: *not* OpenSolaris), but I have been faced with a couple issues I hope you can help me with. The first issue has to do with GNU as (/usr/sfw/bin/gas), there appears to be a check somewhere for what I assume to be the version number of the GNU assembler. When the make is running "/usr/sfw/bin/gas -V" it just hangs at this point with the following output from make: ---- make prefix=/opt/kamailio Makefile:248: config.mak: No such file or directory normal Makefile.defs exec target architecture <i386>, host architecture <x86_64> ---- I did a process listing and noticed the following process waiting: 1719 make prefix=/opt/kamailio 1763 /bin/sh -c if [ -z "/usr/sfw/bin/gas" ] ; then echo "as" ; else if /usr/sfw/bin 1764 /usr/sfw/bin/gas -V I ended up making a wrapper script that just output the version information for "/usr/sfw/bin/gas -V" which let me get a little further. The wrapper script looks as follows: ---- #/bin/ksh if [ "$1" = "-V" ]; then echo "GNU assembler version 2.15 (i386-pc-solaris2.10) using BFD version 2.15" exit else /usr/sfw/bin/gas.bin $@ fi ---- However, when I now try a "make prefix=/opt/kamailio" I am faced with the following error: ---- gcc: installation problem, cannot exec `/usr/sfw/bin/gas': Exec format error ---- The complete output of the make is as follows: ---- make prefix=/opt/kamailio Makefile:248: config.mak: No such file or directory normal Makefile.defs exec target architecture <i386>, host architecture <x86_64> making config... yacc -d -b cfg cfg.y conflicts: 5 shift/reduce flex cfg.lex Makefile.defs defs skipped /usr/sfw/bin/gcc -g -O9 -funroll-loops -Wcast-align -m32 -minline-all-stringops -falign-loops -mtune=athlon -Wall -DNAME='"kamailio"' -DVERSION='"3.0.0-rc2"' -DARCH='"i386"' -DOS='solaris_' -DOS_QUOTED='"solaris"' -DCOMPILER='"/usr/sfw/bin/gcc 3.4.3"' -D__CPU_i386 -D__OS_solaris -DSER_VER=3000000 -DCFG_DIR='"/opt/kamailio/etc/kamailio/"' -DPKG_MALLOC -DSHM_MEM -DSHM_MMAP -DDNS_IP_HACK -DUSE_IPV6 -DUSE_MCAST -DUSE_TCP -DDISABLE_NAGLE -DHAVE_RESOLV_RES -DUSE_DNS_CACHE -DUSE_DNS_FAILOVER -DUSE_DST_BLACKLIST -DUSE_NAPTR -DDBG_QM_MALLOC -DUSE_TLS -DTLS_HOOKS -DSTATISTICS -DFAST_LOCK -DADAPTIVE_WAIT -DADAPTIVE_WAIT_LOOPS=1024 -DCC_GCC_LIKE_ASM -DHAVE_GETIPNODEBYNAME -DHAVE_SYS_SOCKIO_H -DHAVE_SCHED_YIELD -DHAVE_ALLOCA_H -DUSE_SIGACTION -DHAVE_DEVPOLL -DHAVE_SELECT -DHAVE_FILIO_H -c action.c -o action.o gcc: installation problem, cannot exec `/usr/sfw/bin/gas': Exec format error make: *** [action.o] Error 1 ---- If I remove the wrapper script then the make just hangs on the command "/usr/sfw/bin/gas -V". Would anyone know how I could work around the issue? Just an FYI, I am able to build Kamailio 1.5.2-notls on the same machine without any errors/hangs, although we are considering moving to Kamailio 3/Sip-Router when it is officially released, this is why I am trying to build v3.0.0 RC2 at the moment. If you need any further information please dont hesitate to ask, any help in resolving the issue would be greatly appreciated. Thanks Bruce

3 4

[Kamailio-Users] log not showing when using uac_replace_from( ) function
by Robert R 03 Dec '09

03 Dec '09

Hi, I simply trying to modify URI and FROM headers as follow. tcpdump packet capture shows the values are changed for both URI and FROM headers. However, the syslog only shows the new value for URI and not for FROM header. How can I verify new value in FROM header in the log file? # main request routing logic route { $rU = avp(i:1); $rd = avp(i:2); .... uac_replace_from("$avp(i:3)"); xlog ("fu after perl: $fu"); xlog ("ru after perl: $ru"); ... } Thanks, Rob

1 0

[Kamailio-Users] log not showing when using uac_replace_from( ) function
by Robert R 03 Dec '09

03 Dec '09

1 0

[Kamailio-Users] Kamailio Perl OpenSER::AVP
by Örn Arnarson 03 Dec '09

03 Dec '09

Hello everyone, I've been successfully using the kamailio Perl module, but now I'm trying to set AVPs. Unsuccessfully. Whenever I do "use OpenSER::AVP;" and restart kamailio, the following error messages appear and kamailio doesn't start: Dec 3 12:42:51 proxy02 /usr/sbin/kamailio[5392]: ERROR:core:XS_OpenSER__Message_log: perl error: Can't locate OpenSER/AVP.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /etc/kamailio/checkip.pl line 4. Dec 3 12:42:51 proxy02 /usr/sbin/kamailio[5392]: ERROR:core:XS_OpenSER__Message_log: perl error: Can't locate OpenSER/AVP.pm in @INC (@INC contains: /etc/perl /usr/local/lib/perl/5.10.0 /usr/local/share/perl/5.10.0 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 /usr/local/lib/site_perl .) at /etc/kamailio/checkip.pl line 4. BEGIN failed--compilation aborted at /etc/kamailio/checkip.pl line 4. Dec 3 12:42:51 proxy02 /usr/sbin/kamailio[5392]: ERROR:perl:parser_init: failed to load perl file "/etc/kamailio/checkip.pl". Dec 3 12:42:51 proxy02 /usr/sbin/kamailio[5392]: ERROR:core:init_mod: failed to initialize module perl Dec 3 12:42:51 proxy02 /usr/sbin/kamailio[5392]: ERROR:core:main: error while initializing modules Now, I cannot find this AVP module within the perl package anywhere. I downloaded the source of 1.5.0 and it's nowhere to be found. It is, however, in the .1.5 documentation. Does anyone have any info on this for me? Best regards, Örn

3 3

[Kamailio-Users] Using Sip Message in a third application.
by Olivier Détour 03 Dec '09

03 Dec '09

Hello, I'm using Kamailio 1.5.3. I configured it in a proxy mode. I would like to know what is the best way to forward the SIP message to a C application via a socket, block kamailio.cfg script, and reforward it to kamailio to continue his treatment. I found a ugly bay using PV as lock with a while loop, but this solution is not acceptable for me. I saw SEAS module, but it is only for Java Application server. Do you know a simple way to do it with an existing module ? Do I have to write my own module ? Thanks for your response, Regards, -- Olivier Détour EPITA 2009

3 5

topoh: remove Via headers
by Klaus Darilion 03 Dec '09

03 Dec '09

Hi! IIRC correctly. topoh modules rewrites existing Via headers. Would it be possible to remove existing headers completely so that the forwarded request has only one Via header? regards klaus

1 0

[Kamailio-Users] Integrate Skype into Kamailio (Must support video)
by General Lee 03 Dec '09

03 Dec '09

Hi, I would like to integrate Skype into my Kamailio video system? Has anyone implemented this successfully before? Or suggest how this could be done? Key features I would like are: 1. Must support Video 2. Ideally support H264 video codec 3. Share presence information 4. Ability to make calls in both directions I would appreciate any information you could provide. Thanks, -- View this message in context: http://old.nabble.com/Integrate-Skype-into-Kamailio-%28Must-support-video%2… Sent from the OpenSER Users Mailing List mailing list archive at Nabble.com.

4 6

[Kamailio-Users] ERROR:tm:add_uac: maximum number of branches exceeded
by alex pappas 02 Dec '09

02 Dec '09

Hello there, I'm using dispatcher to serial fork a call through many gateways. For a call to number 2XXXXXXXXX , first a try to connect through gateways A,B,C after that D,F , after that E,R , after that M,N and finally after those K,L. When the call is trying gateway N then I'm getting the ERROR:tm:add_uac: maximum number of branches exceeded. I found on internet that I'm exceeding the MAX_BRANCHES: branch=t->nr_of_outgoings; if (branch==MAX_BRANCHES) { LOG(L_ERR, "ERROR:tm:add_uac: maximum number of branches exceeded\n"); ret=E_CFG; goto error; } >From a trace I got , I see that kamailio is sending to each destination IP 8 INVITES and if there is no answer to that is continuing with next destination gateway sending also there 8 INVITES. When the number of INVITES is 52 then I get this error. Does anyone can suggest a way to change the MAX_BRANCHES MAX number ? Is is important to keep open the INVITEs from the first gateways because is an LCR scenario and if I get an answer from these gateways is important to complete through them. Any help is apreciated Thanks Alexandros

2 6

[Kamailio-Users] Random looped back audio issues with RTPPROXY
by tony＠everestbn.com 02 Dec '09

02 Dec '09

Hello, I'm having random audio issues (<10% of the time) with blind call transfers on a Polycom phone. According to RTPPROXY's logs, it seems it is substituting the same IP and port for the caller's and callee's address causing one end to hear their own voice while the other end hears nothing. INFO:rxmit_packets: caller's address filled in: a.b.c.199:17856 (RTP) INFO:rxmit_packets: guessing RTCP port for caller to be 17857 INFO:rxmit_packets: callee's address filled in: a.b.c.199:17856 (RTP) INFO:rxmit_packets: guessing RTCP port for callee to be 17857 The SDP in the SIP messages has all the correct IPs and ports and it appears from a SIP overview everything should work fine. Here is some background information: I am using Kamailio 1.5.3 with RTPPROXY 1.2.1. SIP PATH is as follows: PSTN Gateway---Kamailio--SIP Proxy Server--Polycom Phone RTP PATH: PSTN Gateway---Kamailio----Polycom Phone *There are nor firewalls or filters. Call Flow: I place a call from the gateway to the ip phone. Call is answered. When I do a blind transfer from the Polycom, the SIP Proxy sends an invite with no SDP, the gateway responds with a 200 with SDP and the SIP Proxy then sends an ACK with SDP. As I mentioned, this works most of the time and the SIP messages look identical for when the transfer works and when it doesn't. When it doesn't work the gateway end hears their own voice while the recipient Polycom transfer (usually another phone on the same proxy) hears nothing. Here is a portion of my configuration file: ..... if (is_method("INVITE")) { if((search("^Content-Type:[ ]*application/sdp")) || (search("^Content-Type:application/sdp"))){ rtpproxy_offer("fcr"); setflag(12); } } if (is_method("ACK")) { if((search("^Content-Type:[ ]*application/sdp")) || (search("^Content-Type:application/sdp"))) { rtpproxy_answer("fcr"); } } t_on_reply("1"); .... } onreply_route[1] { if (status=~"(180)|(183)|(2[0-9][0-9])"){ if((search("^Content-Type:[ ]*application/sdp")) || (search("^Content-Type:application/sdp"))) { if (isflagset(12)) { rtpproxy_answer("fcr"); } else { rtpproxy_offer("fcrl"); } } } } Any help would be greatly appreciated! Thanks, Tony

2 1

Re: [Kamailio-Users] [sr-dev] sr and kamailio autogenerated tarballs
by Daniel-Constantin Mierla 02 Dec '09

02 Dec '09

On 12/2/09 1:50 PM, Andrei Pelinescu-Onciul wrote: > Daily snapshots of sr_3.0, kamailio_3.0 and sr master branch can be > downloaded from: http://sip-router.org/tarballs/sr/ . > Note that new tarballs are generated only if there are changes for the > corresponding branch (so if you don't see a tarball with today's date it > means there was no change from the previous one). > > The tarballs are generated via make tar, which makes sure the correct > repository version will be included in the compiled binary (make tar > generates first autover.h before creating the archive). > Thanks Andrei! I cc-ed Kamailio users mailing list, since there might be people interested as well. Cheers, Daniel -- Daniel-Constantin Mierla * http://www.asipto.com/

1 0

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users