sr-users September 2023

sr-users@lists.kamailio.org

52 participants
60 discussions

Getting the name of an already set onreply_route
by Denys Pozniak 14 Oct '24

14 Oct '24

Hello! Is it possible to find out the name of the onreply_route that was set before? Something like this: t_on_reply("MANAGE_REPLY"); ... if ( t_is_set("onreply_route") ) { get_onreply_route_name(); ... } -- BR, Denys Pozniak

3 5

Via header force change protocol to TLS?
by Anthony Alba 30 May '24

30 May '24

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

4 10

Dialog and DMQ on restart
by Björn Klasen 25 Mar '24

25 Mar '24

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

4 9

5.6.4 debian htable dbmode=1 not writing at shutdown
by Bernd Krueger-Knauber 29 Nov '23

29 Nov '23

Hi, I have still the problem that my htables are not written into a sqlite db when I shutdown kamailio. Manual writing via: kamcmd htable.store ... is working. As I can see in the logs with highest loglevel, the function destroy() is never called. ht_db_url.len is > 0 ht_db_init_con() should work, else nothing would work with the db. But I can not see the debug messages from ht_db_open_con() Any ideas? Best regards, Bernd

5 5

Information about Kamailio operating as an SBC
by Alvaro Escobar 24 Oct '23

24 Oct '23

Hello, I am looking information about Kamailio operating as an SBC. I saw this video of Kamailio World 2021: Kamailio As An SBC For Network Segregation: https://www.youtube.com/watch?v=UW6l3R4OnsY&t=1381s But where I can find more detailed technical information ? Regards

3 3

ERROR: run_top_route
by satyaprakash ch 17 Oct '23

17 Oct '23

Hi, We are having an error in the Kamailio logs which we need to resolve this issue, ERROR is ::* /usr/local/sbin/kamailio[10149]: ERROR: tm [t_reply.c:1081]: run_failure_handlers(): error running run_top_route for failure handler.* We are getting this error at the time of the 3xx response, Can anyone help me on this? Thank you.

3 8

Serial Forking with differing next hop for each branch?
by Barry Flanagan 10 Oct '23

10 Oct '23

Hi I have a scenario where I need to implement serial forking but each destination has also a next hop proxy. I can do the forking using append_branch, but how can I set the destination URI for each branch? In some cases the R-URI does not change, only the next hop proxy. Example: R-URI Next Hop user1(a)domain.com XXX.XXX.XXX.XXX user1(a)domain.com YYY.YYY.YYY.YYY user2(a)domain.com XXX.XXX.XXX.XXX I was thinking I could use a htable to store the next hop using the R-URI as the key, but as can be seen above there are possibly duplicate R-URIs with only the next hop changing. Thanks. -- -Barry

4 18

CANCEL first, then INVITE.
by James Lipski 09 Oct '23

09 Oct '23

Hello, Is there a way to change the transaction order when a failure fork occurs -- to explain, endpoint 1 calls endpoint 2. Call towards endpoint 2 goes unanswered, and so the call forks to voicemail, I see that an INVITE is sent towards my voicemail server first, followed by a CANCEL towards the endpoint; can I send the CANCEL first to the endpoint and then INVITE towards my voicemail server. I'm essentially using the bundled/sample configurations for testing. Thank you.

4 10

kamailio Behind nat. How Record-Route should be added ？
by codenot＠msn.com 09 Oct '23

09 Oct '23

UA1(192.168.0.1) --> kamailio (internal:192.168.0.2 public:1.1.1.1) --> UA2(2.2.2.2) if in UA1 INVITE, I write KSR.rr.record_route(). so UA2(2.2.2.2) received sip msg (Record-Route: <sip:1.1.1.1:7080>), so Kamailio can received BYE/ACK from UA2. but，Kamailio can't received BYE/ACK from UA1. if in UA1 INVITE, i write KSR.rr.record_route_advertised_address("192.168.0.2"), then Kamailio can received BYE/ACK from UA1, but not from UA2. what can i do, let Kamailio receive BYE/ACK from both sides ？

6 10

error in parsing HTTP messages
by sigxcpu＠gmail.com 02 Oct '23

02 Oct '23

Hello, In reference to this issue https://github.com/kamailio/kamailio/issues/3081 I've been advised to set http_reply_parse to "no" which I did (and it is the default value anyways). # grep http_reply_parse /etc/kamailio/kamailio.cfg http_reply_parse=no After setting this, I still get these parsing errors: { "idx": 23, "pid": 102, "level": "ERROR", "module": "core", "file": "core/parser/msg_parser.c", "line": 748, "function": "parse_msg", "logprefix": "", "message": "ERROR: parse_msg: message=<HTTP/1.1 100 Continue\r\n\r\nHTTP/1.1 200 OK\r\ndate: Wed, 26 Jul 2023 16:43:19 GMT\r\ncontent-length: 224\r\ncontent-type: text/plain; charset=utf-8\r\n\r\n{\"result\": {\"ruri\":\"\",\"fU\":\"\",\"tU\":\"\",\"privacy\":\"\",\"identity\":\"\",\"error\":{\"code\":0,\"message\":\"\"},\"mb\":\"\",\"Headers\":null,\"encrypted\":\"\",\"sipsScheme\":\"\",\"attestation\":\"\",\"authUser\":\"\",\"authPassword\":\"\",\"disableStirShaken\":\"\"}}>" } Is there anything that I am missing beyond setting that parameter? Thank you, Alexandru

1 1

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2023