sr-users July 2023

sr-users@lists.kamailio.org

28 participants
32 discussions

by Bernd Krueger-Knauber

Hi Daniel, thank you for your response. As you can see in the provided debug output: kamailio[]: DEBUG: htable [ht_api.c:1046]: ht_table_spec(): htable [callpush] - dbmode [1] kamailio[]: DEBUG: htable [ht_api.c:1027]: ht_table_spec(): htable [callpush] - dbtable [userpush] kamailio[]: DEBUG: htable [ht_api.c:1036]: ht_table_spec(): htable [callpush] - expire [86400] kamailio[]: DEBUG: htable [ht_api.c:1041]: ht_table_spec(): htable [callpush] - size [10] dbmode is set to 1 in the config: modparam("htable", "db_url", "sqlite:////etc/kamailio/htable.sqlite") ... modparam("htable", "htable", "userpush=>size=3;autoexpire=600;dbtable=userpush;dbmode=1") If I execute kamcmd htable.store userpush I get Ok. Htable successfully stored to DB. But the table is still empty!!! In the log I found: ERROR: db_sqlite [dbase.c:528]: db_sqlite_commit(): sqlite commit failed: attempt to write a readonly database ERROR: db_sqlite [dbase.c:177]: db_sqlite_cleanup_query(): finalize failed: attempt to write a readonly database ERROR: htable [ht_db.c:668]: ht_db_delete_records(): failed to delete db records in [userpush] ERROR: db_sqlite [dbase.c:528]: db_sqlite_commit(): sqlite commit failed: attempt to write a readonly database Ok. But I can not see this entries if I shutdown kamailio. And: -rw-rw-rw- 1 kamailio root 16384 Jul 13 16:14 htable.sqlite I never used: modparam("db_sqlite","db_set_readonly" ... I also restarted kamailio. no difference. Now more errors then before: It is not written at shutdown. (no messages) It is not written (live) (with error messages, but why it is readonly?) The message of kamcmd is wrong (says Ok but it failed) Best regards, Bernd Am 17.07.2023 um 08:48 schrieb Daniel-Constantin Mierla: > Hello, > > is dbmode=1 in htable definition? > > If you run rpc command htable.store for the htable, are the records > saved to database? > > Cheers, > Daniel > > On 13.07.23 17:45, Bernd Krueger-Knauber wrote: >> Hi, >> >> I just tried to use sqlite and htable to load and save the values. >> At start I can see in the log, that all parameters are correct and >> that htable want to load the values from the table. >> No errors. >> >> But if I stop kamailio, nothing is written to the tables. >> >> At start I can see: >> >> kamailio[]: DEBUG: <core> [core/modparam.c:112]: >> set_mod_param_regex(): 'htable' matches module 'htable' >> kamailio[]: DEBUG: <core> [core/sr_module.c:814]: find_param_export(): >> found <htable> in module htable >> [/usr/lib/x86_64-linux-gnu/kamailio/modules/htable.so] >> kamailio[]: DEBUG: <core> [core/modparam.c:128]: >> set_mod_param_regex(): found <htable> in module htable >> [/usr/lib/x86_64-linux-gnu/kamailio/modules/htable.so] >> kamailio[]: DEBUG: htable [ht_api.c:1046]: ht_table_spec(): htable >> [callpush] - dbmode [1] >> kamailio[]: DEBUG: htable [ht_api.c:1027]: ht_table_spec(): htable >> [callpush] - dbtable [userpush] >> kamailio[]: DEBUG: htable [ht_api.c:1036]: ht_table_spec(): htable >> [callpush] - expire [86400] >> kamailio[]: DEBUG: htable [ht_api.c:1041]: ht_table_spec(): htable >> [callpush] - size [10] >> >> >> >> kamailio[]: DEBUG: htable [ht_api.c:1084]: ht_db_load_tables(): >> loading db table [userpush] in ht [userpush] >> kamailio[]: DEBUG: htable [ht_db.c:232]: ht_db_load_table(): >> =============== loading hash table [userpush] from database [userpush] >> kamailio[]: DEBUG: db_sqlite [dbase.c:223]: db_sqlite_submit_query(): >> submit_query: select key_name,key_type,value_type,key_value from >> userpush order by key_name >> kamailio[]: DEBUG: <core> [db_query.c:72]: db_do_submit_query(): >> submitted query: select key_name,key_type,value_type,key_value from >> userpush order by key_name, result 0 >> kamailio[]: DEBUG: <core> [db_res.c:119]: db_new_result(): allocate 56 >> bytes for result set at 0x7f4882107938 >> kamailio[]: DEBUG: <core> [db_res.c:79]: db_free_columns(): freeing 0 >> columns >> kamailio[]: DEBUG: <core> [db_res.c:138]: db_free_result(): freeing >> result set at 0x7f4882107938 >> >> Ok, the file is empty, but it tries to load the data from the table. >> >> The table looks like: >> >> sqlite> .schema userpush >> CREATE TABLE userpush ( >> key_name TEXT, >> "key_type" INTEGER, >> value_type INTEGER, >> key_value TEXT >> ); >> >> >> I checked the source code and I saw that destroy() should be called. >> Inside is ht_db_open_con() called before ht_db_sync_tables(), were it >> happens. >> But I can even not see the debug message from ht_db_open_con() : >> >> LM_DBG("database connection opened successfully\n") >> and also not >> LM_ERR("failed to connect to the database\n"); >> >> For me it looks like, that the destroy() function is not called. >> >> Even with debug=3, I can only see: >> >> >> systemd[]: Stopping kamailio.service - Kamailio - the Open Source SIP >> Server... >> kamailio[]: INFO: <core> [main.c:854]: sig_usr(): signal 15 received >> systemd[]: kamailio.service: Deactivated successfully. >> systemd[]: Stopped kamailio.service - Kamailio - the Open Source SIP >> Server. >> >> I stopped kamailio with >> >> systemctl stop kamailio >> >> I'm sure that something was inside the htable before I stoped kamailio: >> >> { >> entry: 0 >> size: 1 >> slot: { >> { >> name: >> 07db580a6c13e798a5acc0d123d6e957897c8650b43f99d6d5cb9c2cb5ba4fa4 >> value: >> 3a28dcb73eb65722df5a261983b7692cecdca482bf8725032e46a0c6b89fb355 >> type: str >> } >> } >> } >> >> Any further ideas? >> >> Best regards, >> >> Bernd >> >> >> >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> To unsubscribe send an email tosr-users-leave(a)lists.kamailio.org >> Important: keep the mailing list in the recipients, do not reply only >> to the sender! >> Edit mailing list options or unsubscribe: -- EDNT GmbH Werner-von-Siemens-Strasse 7 64625 Bensheim www.ednt.de Registergericht: Darmstadt Registernummer: 24972 Geschäftsführer: Karlheinz Knapp

9 months, 3 weeks

Fwd: Kamailio 5.6.4 and htable dbmode=1

by Bernd Krueger-Knauber

-------- Weitergeleitete Nachricht -------- Betreff: Re: [SR-Users] Kamailio 5.6.4 and htable dbmode=1 Datum: Mon, 17 Jul 2023 09:50:37 +0200 Von: Bernd Krueger-Knauber <bkk(a)ednt.de> An: miconda(a)gmail.com Hi Daniel, thank you for your response. As you can see in the provided debug output: kamailio[]: DEBUG: htable [ht_api.c:1046]: ht_table_spec(): htable [callpush] - dbmode [1] kamailio[]: DEBUG: htable [ht_api.c:1027]: ht_table_spec(): htable [callpush] - dbtable [userpush] kamailio[]: DEBUG: htable [ht_api.c:1036]: ht_table_spec(): htable [callpush] - expire [86400] kamailio[]: DEBUG: htable [ht_api.c:1041]: ht_table_spec(): htable [callpush] - size [10] dbmode is set to 1 in the config: modparam("htable", "db_url", "sqlite:////etc/kamailio/htable.sqlite") ... modparam("htable", "htable", "userpush=>size=3;autoexpire=600;dbtable=userpush;dbmode=1") If I execute kamcmd htable.store userpush I get Ok. Htable successfully stored to DB. But the table is still empty!!! In the log I found: ERROR: db_sqlite [dbase.c:528]: db_sqlite_commit(): sqlite commit failed: attempt to write a readonly database ERROR: db_sqlite [dbase.c:177]: db_sqlite_cleanup_query(): finalize failed: attempt to write a readonly database ERROR: htable [ht_db.c:668]: ht_db_delete_records(): failed to delete db records in [userpush] ERROR: db_sqlite [dbase.c:528]: db_sqlite_commit(): sqlite commit failed: attempt to write a readonly database Ok. But I can not see this entries if I shutdown kamailio. And: -rw-rw-rw- 1 kamailio root 16384 Jul 13 16:14 htable.sqlite I never used: modparam("db_sqlite","db_set_readonly" ... I also restarted kamailio. no difference. No more errors then before: It is not written at shutdown. (no messages) It is not written (live) (with error messages, but why it is readonly?) The message of kamcmd is wrong (says Ok but it failed) Best regards, Bernd Am 17.07.2023 um 08:48 schrieb Daniel-Constantin Mierla: > Hello, > > is dbmode=1 in htable definition? > > If you run rpc command htable.store for the htable, are the records > saved to database? > > Cheers, > Daniel > > On 13.07.23 17:45, Bernd Krueger-Knauber wrote: >> Hi, >> >> I just tried to use sqlite and htable to load and save the values. >> At start I can see in the log, that all parameters are correct and >> that htable want to load the values from the table. >> No errors. >> >> But if I stop kamailio, nothing is written to the tables. >> >> At start I can see: >> >> kamailio[]: DEBUG: <core> [core/modparam.c:112]: >> set_mod_param_regex(): 'htable' matches module 'htable' >> kamailio[]: DEBUG: <core> [core/sr_module.c:814]: find_param_export(): >> found <htable> in module htable >> [/usr/lib/x86_64-linux-gnu/kamailio/modules/htable.so] >> kamailio[]: DEBUG: <core> [core/modparam.c:128]: >> set_mod_param_regex(): found <htable> in module htable >> [/usr/lib/x86_64-linux-gnu/kamailio/modules/htable.so] >> kamailio[]: DEBUG: htable [ht_api.c:1046]: ht_table_spec(): htable >> [callpush] - dbmode [1] >> kamailio[]: DEBUG: htable [ht_api.c:1027]: ht_table_spec(): htable >> [callpush] - dbtable [userpush] >> kamailio[]: DEBUG: htable [ht_api.c:1036]: ht_table_spec(): htable >> [callpush] - expire [86400] >> kamailio[]: DEBUG: htable [ht_api.c:1041]: ht_table_spec(): htable >> [callpush] - size [10] >> >> >> >> kamailio[]: DEBUG: htable [ht_api.c:1084]: ht_db_load_tables(): >> loading db table [userpush] in ht [userpush] >> kamailio[]: DEBUG: htable [ht_db.c:232]: ht_db_load_table(): >> =============== loading hash table [userpush] from database [userpush] >> kamailio[]: DEBUG: db_sqlite [dbase.c:223]: db_sqlite_submit_query(): >> submit_query: select key_name,key_type,value_type,key_value from >> userpush order by key_name >> kamailio[]: DEBUG: <core> [db_query.c:72]: db_do_submit_query(): >> submitted query: select key_name,key_type,value_type,key_value from >> userpush order by key_name, result 0 >> kamailio[]: DEBUG: <core> [db_res.c:119]: db_new_result(): allocate 56 >> bytes for result set at 0x7f4882107938 >> kamailio[]: DEBUG: <core> [db_res.c:79]: db_free_columns(): freeing 0 >> columns >> kamailio[]: DEBUG: <core> [db_res.c:138]: db_free_result(): freeing >> result set at 0x7f4882107938 >> >> Ok, the file is empty, but it tries to load the data from the table. >> >> The table looks like: >> >> sqlite> .schema userpush >> CREATE TABLE userpush ( >> key_name TEXT, >> "key_type" INTEGER, >> value_type INTEGER, >> key_value TEXT >> ); >> >> >> I checked the source code and I saw that destroy() should be called. >> Inside is ht_db_open_con() called before ht_db_sync_tables(), were it >> happens. >> But I can even not see the debug message from ht_db_open_con() : >> >> LM_DBG("database connection opened successfully\n") >> and also not >> LM_ERR("failed to connect to the database\n"); >> >> For me it looks like, that the destroy() function is not called. >> >> Even with debug=3, I can only see: >> >> >> systemd[]: Stopping kamailio.service - Kamailio - the Open Source SIP >> Server... >> kamailio[]: INFO: <core> [main.c:854]: sig_usr(): signal 15 received >> systemd[]: kamailio.service: Deactivated successfully. >> systemd[]: Stopped kamailio.service - Kamailio - the Open Source SIP >> Server. >> >> I stopped kamailio with >> >> systemctl stop kamailio >> >> I'm sure that something was inside the htable before I stoped kamailio: >> >> { >> entry: 0 >> size: 1 >> slot: { >> { >> name: >> 07db580a6c13e798a5acc0d123d6e957897c8650b43f99d6d5cb9c2cb5ba4fa4 >> value: >> 3a28dcb73eb65722df5a261983b7692cecdca482bf8725032e46a0c6b89fb355 >> type: str >> } >> } >> } >> >> Any further ideas? >> >> Best regards, >> >> Bernd >> >> >> >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> To unsubscribe send an email tosr-users-leave(a)lists.kamailio.org >> Important: keep the mailing list in the recipients, do not reply only >> to the sender! >> Edit mailing list options or unsubscribe: -- EDNT GmbH Werner-von-Siemens-Strasse 7 64625 Bensheim www.ednt.de Registergericht: Darmstadt Registernummer: 24972 Geschäftsführer: Karlheinz Knapp

9 months, 3 weeks

Kamailio 5.6.4 and htable dbmode=1

by Bernd Krueger-Knauber

Hi, I just tried to use sqlite and htable to load and save the values. At start I can see in the log, that all parameters are correct and that htable want to load the values from the table. No errors. But if I stop kamailio, nothing is written to the tables. At start I can see: kamailio[]: DEBUG: <core> [core/modparam.c:112]: set_mod_param_regex(): 'htable' matches module 'htable' kamailio[]: DEBUG: <core> [core/sr_module.c:814]: find_param_export(): found <htable> in module htable [/usr/lib/x86_64-linux-gnu/kamailio/modules/htable.so] kamailio[]: DEBUG: <core> [core/modparam.c:128]: set_mod_param_regex(): found <htable> in module htable [/usr/lib/x86_64-linux-gnu/kamailio/modules/htable.so] kamailio[]: DEBUG: htable [ht_api.c:1046]: ht_table_spec(): htable [callpush] - dbmode [1] kamailio[]: DEBUG: htable [ht_api.c:1027]: ht_table_spec(): htable [callpush] - dbtable [userpush] kamailio[]: DEBUG: htable [ht_api.c:1036]: ht_table_spec(): htable [callpush] - expire [86400] kamailio[]: DEBUG: htable [ht_api.c:1041]: ht_table_spec(): htable [callpush] - size [10] kamailio[]: DEBUG: htable [ht_api.c:1084]: ht_db_load_tables(): loading db table [userpush] in ht [userpush] kamailio[]: DEBUG: htable [ht_db.c:232]: ht_db_load_table(): =============== loading hash table [userpush] from database [userpush] kamailio[]: DEBUG: db_sqlite [dbase.c:223]: db_sqlite_submit_query(): submit_query: select key_name,key_type,value_type,key_value from userpush order by key_name kamailio[]: DEBUG: <core> [db_query.c:72]: db_do_submit_query(): submitted query: select key_name,key_type,value_type,key_value from userpush order by key_name, result 0 kamailio[]: DEBUG: <core> [db_res.c:119]: db_new_result(): allocate 56 bytes for result set at 0x7f4882107938 kamailio[]: DEBUG: <core> [db_res.c:79]: db_free_columns(): freeing 0 columns kamailio[]: DEBUG: <core> [db_res.c:138]: db_free_result(): freeing result set at 0x7f4882107938 Ok, the file is empty, but it tries to load the data from the table. The table looks like: sqlite> .schema userpush CREATE TABLE userpush ( key_name TEXT, "key_type" INTEGER, value_type INTEGER, key_value TEXT ); I checked the source code and I saw that destroy() should be called. Inside is ht_db_open_con() called before ht_db_sync_tables(), were it happens. But I can even not see the debug message from ht_db_open_con() : LM_DBG("database connection opened successfully\n") and also not LM_ERR("failed to connect to the database\n"); For me it looks like, that the destroy() function is not called. Even with debug=3, I can only see: systemd[]: Stopping kamailio.service - Kamailio - the Open Source SIP Server... kamailio[]: INFO: <core> [main.c:854]: sig_usr(): signal 15 received systemd[]: kamailio.service: Deactivated successfully. systemd[]: Stopped kamailio.service - Kamailio - the Open Source SIP Server. I stopped kamailio with systemctl stop kamailio I'm sure that something was inside the htable before I stoped kamailio: { entry: 0 size: 1 slot: { { name: 07db580a6c13e798a5acc0d123d6e957897c8650b43f99d6d5cb9c2cb5ba4fa4 value: 3a28dcb73eb65722df5a261983b7692cecdca482bf8725032e46a0c6b89fb355 type: str } } } Any further ideas? Best regards, Bernd

9 months, 3 weeks

Using Kamailio in front of Freeswitch for load balancing REG and Calls

by Shah Hussain Khattak

Hello Awesome people, I have configured Kamailio in front of two Freeswitch servers. I am using the dispatcher module to load and balance the traffic between the two FS boxes. My dispatcher is configured in a round-robin fashion. If I send a register to my FS servers, the re-register post-challenge (401) message is routed to the second FS server and the registration fails. I want to check with you guys how are you handling this in your setups. I am sure a lot of companies are using Kamailio to load balance traffic toward the FS and Asterisk servers. UAC --- > Kamailio --- > FS1 REG ---- > REG ---- > REG 401 <---- 401 < ---- 401 re-register with authorization data: UAC --- > Kamailio --- > FS2 REG --- > REG ---- > REG 401 <---- 401 < ---- 401 it just create this loop and register fails. Ideally, I want Kamailio to send the re-register (with auth data) to the same FS server that challenged it. Any ideas or pointers to fix this issue would be highly appreciated, maybe I am missing some very basic configuration. Or maybe there is another simpler way instead of using a dispatcher module. Thank you! Regards, Shah Hussain

10 months

Re: sr-users Digest, Vol 218, Issue 16

by satyaprakash ch

Hi Please find some more before and after, Ip address and number is masked FYI. INFO: <script>: TIME : TEST - Rewriting To header with Request line so that vendor prefix is present INFO: <script>: TIME : TEST2 - tu is sip:+123456789@10.0.77.88 and ru is sip:10.0.1.47:5060 INFO: <script>: TIME : TEST3 - tu is sip:+123456789@10.0.77.88 and ru is sip:10.0.1.47:5060 ERROR: tm [tm.c:1752]: _w_t_relay_to(): t_forward_noack failed ERROR: tm [t_reply.c:1081]: run_failure_handlers(): error running run_top_route for failure handler INFO: <script>: TIME : [Mon Jul 10 12:24:14 2023] CALL ID : [31bca077-99fa-123c-eb84-00219b9e3ef4] [WITHINDIALOG] The request is [ACK] INFO: <script>: TIME : [Mon Jul 10 12:24:14 2023] CALL ID : [31bca077-99fa-123c-eb84-00219b9e3ef4] [PROXY_OUTBOUND_HANDLE] [ACK] INFO: <script>: TIME : [Mon Jul 10 12:24:14 2023] CALL ID : [ 205526695_49743609(a)206.147.84.20] [WITHINDIALOG] The request is [ACK] Here is the code i suspect, Let me know if you can find some thing why the error usually gets, *failure_route["serial"] { if (!t_next_contacts()) { exit; } t_on_failure("serial"); xlog("L_INFO","TIME : [$Tf] CALL ID : [$ci] [serial]The altered ruri is [$ru] \n"); xlog("L_INFO", "TIME : TEST - Rewriting To header with Request line so that vendor prefix is present"); xlog("L_INFO","TIME : TEST2 - tu is $tu and ru is $ru \n"); $tu = $ru; xlog("L_INFO","TIME : TEST3 - tu is $tu and ru is $ru \n"); t_relay();}event_route[tm:branch-failure:REMOVE_OLD_REGISTER] { if (t_check_status("(404)|(410)")) { xlog("L_INFO","TIME : Received code [$T(reply_code)] from SBC, need to remove registration \n"); xlog("L_INFO","TIME : [$Tf] CALL ID : [$ci] [REMOVE_OLD_REGISTER] contact is [$ct]Unregister section is entered [$ru] \n"); unregister("location", "$tu", "$T_reply_ruid"); }}* Thank you. On Tue, Jul 11, 2023 at 3:46 PM <sr-users-request(a)lists.kamailio.org> wrote: > Send sr-users mailing list submissions to > sr-users(a)lists.kamailio.org > > To subscribe or unsubscribe via email, send a message with subject or > body 'help' to > sr-users-request(a)lists.kamailio.org > > You can reach the person managing the list at > sr-users-owner(a)lists.kamailio.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of sr-users digest..." > > Today's Topics: > > 1. Need an error description (satyaprakash ch) > 2. Re: Need an error description (Alex Balashov) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 10 Jul 2023 22:25:31 +0530 > From: satyaprakash ch <chiramchetty.satyaprakash(a)gmail.com> > Subject: [SR-Users] Need an error description > To: "Kamailio (SER) - Users Mailing List" > <sr-users(a)lists.kamailio.org> > Message-ID: > < > CAO-xAtGhcDMiPtoGdBeb6qvhOg8u7hxKt-w-5oU4KuOkdRHuqg(a)mail.gmail.com> > Content-Type: multipart/alternative; > boundary="0000000000005a4339060024dadd" > > Hi, > > Can anyone help me with the error why can we get this? > > ERROR: tm [tm.c:1752]: _w_t_relay_to(): t_forward_noack failed ERROR: tm > [t_reply.c:1081]: run_failure_handlers(): error running run_top_route for > failure handler > > Thank you. >

10 months

Need an error description

by satyaprakash ch

Hi, Can anyone help me with the error why can we get this? ERROR: tm [tm.c:1752]: _w_t_relay_to(): t_forward_noack failed ERROR: tm [t_reply.c:1081]: run_failure_handlers(): error running run_top_route for failure handler Thank you.

10 months

event_route[tm:local-response] only executes a few times

by Kaufman

Hello, I'm writing a 302 redirect server and wanting to capture some events on all replies, so I'm trying to do this in event_route[tm:local-response], but I noticed that the event route is only called a few times for the first few requests, and then never gets executed again. This is the simplest case in which I can reproduce the issue: #!KAMAILIO loadmodule "pv" loadmodule "tm" loadmodule "xlog" route { xinfo("[$rm $ci-$cs] Src:[$si:$sp] RURI:[$ru] To:[$tu] From:[$fu]\n"); t_send_reply("404", "Not Found"); exit; } event_route[tm:local-response] { xcrit("[$rm $ci-$cs] tm:local-response replied locally\n"); } If I start Kamailio with kamailio -ddDDeE it has 8 children. If I use sipp to send 10 requests, this is what I see in the kamailio logs. The critical line in the event route is only printed four times. This is tested on 5.7.0 and 5.6.4 9(66) INFO: <script>: [INVITE 1-14(a)172.26.0.3-1<mailto:1-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 9(66) CRITICAL: <script>: [INVITE 1-14(a)172.26.0.3-1<mailto:1-14@172.26.0.3-1>] tm:local-response replied locally 10(67) INFO: <script>: [ACK 1-14(a)172.26.0.3-1<mailto:1-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 11(68) INFO: <script>: [INVITE 2-14(a)172.26.0.3-1<mailto:2-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 11(68) CRITICAL: <script>: [INVITE 2-14(a)172.26.0.3-1<mailto:2-14@172.26.0.3-1>] tm:local-response replied locally 12(69) INFO: <script>: [ACK 2-14(a)172.26.0.3-1<mailto:2-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 13(70) INFO: <script>: [INVITE 3-14(a)172.26.0.3-1<mailto:3-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 13(70) CRITICAL: <script>: [INVITE 3-14(a)172.26.0.3-1<mailto:3-14@172.26.0.3-1>] tm:local-response replied locally 14(71) INFO: <script>: [ACK 3-14(a)172.26.0.3-1<mailto:3-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 15(72) INFO: <script>: [INVITE 4-14(a)172.26.0.3-1<mailto:4-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 15(72) CRITICAL: <script>: [INVITE 4-14(a)172.26.0.3-1<mailto:4-14@172.26.0.3-1>] tm:local-response replied locally 16(73) INFO: <script>: [ACK 4-14(a)172.26.0.3-1<mailto:4-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 9(66) INFO: <script>: [INVITE 5-14(a)172.26.0.3-1<mailto:5-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 10(67) INFO: <script>: [ACK 5-14(a)172.26.0.3-1<mailto:5-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 11(68) INFO: <script>: [INVITE 6-14(a)172.26.0.3-1<mailto:6-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 12(69) INFO: <script>: [ACK 6-14(a)172.26.0.3-1<mailto:6-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 13(70) INFO: <script>: [INVITE 7-14(a)172.26.0.3-1<mailto:7-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 14(71) INFO: <script>: [ACK 7-14(a)172.26.0.3-1<mailto:7-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 15(72) INFO: <script>: [INVITE 8-14(a)172.26.0.3-1<mailto:8-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 16(73) INFO: <script>: [ACK 8-14(a)172.26.0.3-1<mailto:8-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 9(66) INFO: <script>: [INVITE 9-14(a)172.26.0.3-1<mailto:9-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 10(67) INFO: <script>: [ACK 9-14(a)172.26.0.3-1<mailto:9-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 11(68) INFO: <script>: [INVITE 10-14(a)172.26.0.3-1<mailto:10-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] 12(69) INFO: <script>: [ACK 10-14(a)172.26.0.3-1<mailto:10-14@172.26.0.3-1>] Src:[172.26.0.3:5060] RURI:[sip:service@172.26.0.2:5060] To:[sip:service@172.26.0.2:5060] From:[sip:sipp@172.26.0.3:5060] Kaufman

10 months

Random number

by Ali Taher

Hello, As per Kamailio documentation, $RANDOM returns a random value from the [0 - 2^31) range. But when testing it it's always returning a random number of 9 or 10 digits. I'm not sure if it's always the case or if it can also returns numbers with 1 or 2 digits as well. Another question, how can I force it to return a number of specific digits starting with certain prefix. Regards,

10 months, 1 week

Finding a way to gracefully restart kamailio with dialog module enabled and DMQ sync

by Benoît Panizzon

Hi Gang We are still having massive issues on how to safely reload kamailio after config changes when using the dialog module and DMQ. If there are active dialogues, kamailio corrupts them on a restart even when using MySQL as dialog backend. As we use two core nodes for redundancy, I am looking for a way to gracefully restart kamailio. I am considering adding some key in a hash table or anything else I can reload on runtime to indicate to kamailio not to accept any new calls (effectively rejecting Invites without To-Tag with 503 causing the registrar or IC peer to hopefully resend the invite to the other node). Then wait, until no more dialogues are active, so kamailio can safely be restarted. My Issue now: How can I find out, one specific node does not have any active dialogues? 'kamcmd dlg.stats_active' returns the count of all DMQ synced nodes, not of the local one. And suggestions or any other ideas how I can 'reload' the kamailio config without disrupting active dialogues? My last resort would be to look into the database: modparam("dialog", "h_id_start", -1) # Use server_id modparam("dialog", "h_id_step", 2) So odd/even H_ID should tell me the number per node. But I see a lot of orphan dialogues hanging around in the database not being cleaned so I guess that will not be reliable at all. Yes, I know I will get the question: 'Why do you need to restart kamailio that often'. We have started production on our kamailio based TSP platform. And of course, despite a LOT of testing beforehand, there is always some issue that pops up. At the moment, I have to implement a config change about once or twice a week to fix some new minor issues. I hope, somewhen in the future we will hopefully have a stable config which will last for several months, but at the moment this is the situation. -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

10 months, 1 week

Randomize calling number

by Ali Taher

Hello, What is the best way to change the calling number to a random number (based on specific pattern, like number of digits for example) in an invite packet without using a database. So the scenario is : * receive an invite packet from certain source * change the calling number * send back the invite packet including the new calling number to the original source. Regards, Ali Taher

10 months, 1 week

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users July 2023