sr-users April 2023

sr-users@lists.kamailio.org

44 participants
46 discussions

Kamailio + PostgreSQL
by georgy.grigoryev＠snapcom.fr 14 Apr '23

14 Apr '23

Hello everyone, I'm trying to connect Kamailio 5.5.5 to my PostgreSQL 14. They are on two different servers. I have created the Kamailio DB on the Postgre with the help of the command "kamdbctl create" I'm able to connect to the database with no problem. The problem is in the kamailio.cfg file, i have added this so far: #!define WITH_PGSQL #!ifdef WITH_PGSQL #!define DBURL "postgres://USER:PASSWORD@IP:POPT/kamailio" #!endif #!ifdef WITH_PGSQL loadmodule "db_postgres.so" #!endif modparam("db_postgres", "retries", 3) modparam("db_postgres", "timeout", 10) modparam("db_postgres", "tcp_keepalive", 600) modparam("db_postgres", "lockset", 6) modparam("db_postgres", "bytea_output_escape", 0) But my kamailio doenst like this configuration, can someone help me find the problem? Thank you in advance! Best Regards!

3 2

manipulate Authentication header
by David Villasmil 13 Apr '23

13 Apr '23

Hello guys, I can't find a simple way of changing the username and recalculate the has in a REGISTER... do i have to use textops? Regards, David Villasmil email: david.villasmil.work(a)gmail.com phone: +34669448337

2 1

How to correctly use the SST module?
by Benoît Panizzon 11 Apr '23

11 Apr '23

Hi I still have odd behaviour with the SST module: modparam("sst", "min_se", 300) if (sstCheckMin("1")) { xlog("L_ERR", "$cfg(route) Session Timer too small\n"); exit; } setflag(FLT_DLG); # set the dialog flag setflag(FLT_SST); # Set the sst flag if(is_present_hf("Session-Expires")) { $avp(dlgtimeout) = $(hdr(Session-Expires){s.int}); } On an INVITE containing those header: Session-Expires: 3600;refresher=uac Min-SE: 600 Supported: 100rel,timer Expires: 330 Now Kamailio replies: SIP/2.0 422 Session Timer Too Small Min-SE: 300 What am I doing wrong? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 0

dlg_onroute(): unable to find dialog for INVITE with route param
by Benoît Panizzon 10 Apr '23

10 Apr '23

Happy Eastern Kamailio 5.4 used. On dialogues calls, I noticed this happening on the second re-invite to refresh the session from the B side. dlg_onroute(): unable to find dialog for INVITE with route param 'df9.da75' [2557:22445] and call-id '14148a68-f1b2-485d-b5a2-f9dd7773d2c0' The did df9.da75 is identical to the one in the route-header on the first re-invite from the B side, before this one. No CDR was (yet) generated, and the dialogues is still present and on-going according to the database: CallID [14148a68-f1b2-485d-b5a2-f9dd7773d2c0] H-Entry: 2557 H-ID: 22445 But most probably not in memory as kamcmd dlg.stat_active shows zero (this is on a development node, so no other calls running). There are no sip messages that end the call in between those two re-invites. I see no session timeouts or similar in the logs. Any hint what could cause Kamailio not to find the corresponding dialogue on this re-invite? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 2

Fwd: Kamailio + PostgreSQL
by Stefan 07 Apr '23

07 Apr '23

Hi Give it a try without modparams to see if it works, I have the same config but without modparams and it runs without problems. Else have a look into the kamailio logfile for errors. Or check config with "kamailio -c"? Regards Stefan Am 06.04.23 um 15:18 schrieb georgy.grigoryev(a)snapcom.fr: > Hello everyone, > > I'm trying to connect Kamailio 5.5.5 to my PostgreSQL 14. > They are on two different servers. > I have created the Kamailio DB on the Postgre with the help of the > command "kamdbctl create" > I'm able to connect to the database with no problem. > The problem is in the kamailio.cfg file, i have added this so far: > > #!define WITH_PGSQL > > #!ifdef WITH_PGSQL > #!define DBURL "postgres://USER:PASSWORD@IP:POPT/kamailio" > #!endif > > #!ifdef WITH_PGSQL > loadmodule "db_postgres.so" > #!endif > > modparam("db_postgres", "retries", 3) > modparam("db_postgres", "timeout", 10) > modparam("db_postgres", "tcp_keepalive", 600) > modparam("db_postgres", "lockset", 6) > modparam("db_postgres", "bytea_output_escape", 0) > > But my kamailio doenst like this configuration, can someone help me > find the problem? > > Thank you in advance! > > Best Regards! > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > To unsubscribe send an email to sr-users-leave(a)lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only > to the sender! > Edit mailing list options or unsubscribe:

2 2

Malformed To Header
by Serdar GUCLUER 06 Apr '23

06 Apr '23

Hello all, In my situation, it is possible to call forwarding to registered users multiple times on same leg. For each forward i have to update To uri and i am using uac_replace_to to do that. But on second relaying, To uri was malformed. On below, Im attaching configuration to illustrate my problem. (version-5.4.9) First relay - /To: //sip:xyz@192.168.0.51/ Second relay - /To: sip:xyz@192.168.0.51sip:abc@192.168.0.51/ Thanks in advance. Serdar /loadmodule "uac.so"// //modparam("uac","restore_mode","auto")// // // //request_route {// // ...// // $avp(x) = "abc";// // $avp(x) = "xyz";// // $avp(myip) = "192.168.0.51";// // $avp(i) = 0;// // route(SERDAR);// // ...// //}// // //route[SERDAR] {// // if ($(avp(x)[$avp(i)])!=$null) {// // $avp(destination) = $(avp(x)[$avp(i)]);// // $avp(i) = $avp(i) + 1;// // $rU=$_s($avp(destination));// //uac_replace_to("$_s(sip:$avp(destination)@$avp(myip))");// // route(LOCATION);// // } else {// // send_reply("403", "Opps!");// // exit;// // }// //}// // //route[LOCATION] {// // $avp(oexten) = $rU;// // if (!lookup("location") ) {// // t_newtran();// // switch ($var(rc)) {// // case -1:// // case -3:// // send_reply("480", "Temporarily Unavailable");// // exit;// // case -2:// // send_reply("405", "Method Not Allowed");// // exit;// // }// // }// // t_on_failure("SERDAR_FAILURE");// // if(!t_relay()) sl_reply_error();// // exit;// //}// // //failure_route[SERDAR_FAILURE] {// // route(NATMANAGE);// // if (t_is_canceled()) //exit;// // route(SERDAR);// //}/

6 11

Presence module and privacy
by Ihor Olkhovskyi 06 Apr '23

06 Apr '23

Hello! Is there any possibility to control more-or-less privacy related parameters of pua_dialoginfo module (like include_localremote) per subscription? Main idea is I want to show some users full info on the call other user is making, for a different user - just show fact of the call without any details. For now I'm only seeing some manual manipulation over XML based on user who is receiving NOTIFY, but maybe I'm trying to invent a weel here. -- Best regards, Ihor (Igor)

2 2

Re: Repository for modules
by Henning Westerholt 06 Apr '23

06 Apr '23

(please keep the list in the communication) Hello, you can find the modules for example in the Debian package service: https://packages.debian.org/bullseye/amd64/kamailio-tls-modules/filelist Crypto is in TLS module package. Cheers, Henning From: Duarte Rocha <duarterocha91(a)gmail.com> Sent: Donnerstag, 6. April 2023 15:42 To: Henning Westerholt <hw(a)gilawa.com> Subject: Re: [SR-Users] Repository for modules Thanks for the quick answer. How can I see info regarding which modules are in the combined packages? One of the modules i'm looking into is the crypto module for example. Otherwise, where can I get a list of modules not included in Debian packages? Cheers, Duarte Henning Westerholt <hw(a)gilawa.com<mailto:hw@gilawa.com>> escreveu no dia quinta, 6/04/2023 à(s) 13:17: Hello, the majority of modules should be packaged for Debian. What modules are missing for you? Keep in mind that some modules are combined in some packages. Some modules can not properly packaged due to missing dependencies, this needs to be installed from source, right. Cheers, Henning From: Duarte Rocha <duarterocha91(a)gmail.com<mailto:duarterocha91@gmail.com>> Sent: Donnerstag, 6. April 2023 13:55 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org>> Subject: [SR-Users] Repository for modules Hello, I'm currently testing Kamailio on a Debian 11 machine. In order to install it I used apt with repositories from Kamailio (https://deb.kamailio.org/). Now I'm trying to add modules and I'm wondering the best way to do it. Using apt install i don't have access to all the modules. Is there another repository for this? Is my only solution downloading and compiling the modules? Cheers

1 0

Repository for modules
by Duarte Rocha 06 Apr '23

06 Apr '23

Hello, I'm currently testing Kamailio on a Debian 11 machine. In order to install it I used apt with repositories from Kamailio (https://deb.kamailio.org/). Now I'm trying to add modules and I'm wondering the best way to do it. Using apt install i don't have access to all the modules. Is there another repository for this? Is my only solution downloading and compiling the modules? Cheers

2 2

issue in kamailio of udp
by satyaprakash ch 06 Apr '23

06 Apr '23

Hi, I had upgraded Kamailio from 5.4.7 to 5.5.5, Then I restarted the Kamailio service. After upgradation im getting the below error, /usr/local/sbin/kamailio[21754]: ERROR: <core> [core/udp_server.c:596]: udp_send(): sendto(sock, buf: 0x7f7502289200, len: 61012, 0, dst: ( 10.122.45.189:5080), tolen: 16) - err: No buffer space available (105) /usr/local/sbin/kamailio[21754]: ERROR: tm [../../core/forward.h:231]: msg_send_buffer(): udp_send failed /usr/local/sbin/kamailio[21754]: ERROR: tm [uac.c:678]: send_prepared_request_impl(): Attempt to send to precreated request failed ERROR: tm [../../core/forward.h:231]: msg_send_buffer(): udp_send failed ERROR: tm [uac.c:678]: send_prepared_request_impl(): Attempt to send to precreated request failed Anyone have any idea on this errors.

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users April 2023