sr-users December 2023

sr-users@lists.kamailio.org

33 participants
27 discussions

by Björn Klasen

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

1 month, 3 weeks

Kemi questions

by Stefan-Cristian Mititelu

Hello, When writing kemi cfg (python in my case), is there any way to get rid of standard cfg shared variables and use kemi cfg variables instead? E.g. Instead of $shv(blabla) (in standard config) can I use some global python var called 'blabla'? Is it seen and shared by all kamailio processes? Or I still need to use KSR.pv.get/set("$shv(blabla)") ? Thank you, Stefan

2 months, 4 weeks

print_dset(): no r-uri or branches

by Ali Taher

Hello all, I'm using Kamailio as SIP redirect where I'm appending the contact header then send reply back using sl_send_reply("300","Multiple Choices"). But I'm getting "print_dset(): no r-uri or branches" as warning in the log and no packet is sent back from Kamailio to the original sender. I'm using same Kamailio configuration in another setup and it's working correctly without facing this error. I'm not able to detect the issue. Can you please assist? Regards,

3 months, 2 weeks

Standard on RTP ports

by ZZ Wave

Hello. I have some rant with network security dept. Is there some standard, RFC, what port range should be used for RTP traffic, how RTP ports are selected during SIP call negotiation? Thanks.

4 months, 1 week

Re: uac_req_send + evroute + crash

by Péter Dr. Barabás

Hello, Any idea about the crash below? I found a ticket regarding to this, I made some comments and backtraces there also: https://github.com/kamailio/kamailio/issues/3635 Now this crash is very frequently, 3-4 times every day. There is a timer mechnism, where kamailio refreshes registrations towards asterisk automically to ensure continuous availability for mobile users. The crash exists 3-5 secs after this refresh process, but not always. Sometimes this process runs fine only CRITICAL logs appears (mentioned below) after it, but sometimes kamailio crashes during writing these CRITICAL logs. Peter From: Dr. Barabás Péter via sr-users <sr-users(a)lists.kamailio.org> Date: Wednesday, 2023. November 15. 17:03 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Cc: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com> Subject: [SR-Users] Re: uac_req_send + evroute + crash Hello Daniel, I’m using kamailio 5.7.2 currently and this misterious crash occurs again. Now core files are generated also, here is the trace: (gdb) bt #0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50 #1 0x00007fae9a2d0859 in __GI_abort () at abort.c:79 #2 0x00005614ad79afd8 in qm_debug_check_frag (qm=0x7fae78e77000, f=0x7fae79805028, file=0x7fae77c8c134 "uac: uac_send.c", line=860, efile=0x5614ad936f99 "core/mem/q_malloc.c", eline=511) at core/mem/q_malloc.c:129 #3 0x00005614ad79f7c1 in qm_free (qmp=0x7fae78e77000, p=0x7fae79805060, file=0x7fae77c8c134 "uac: uac_send.c", func=0x7fae77c8cf10 <__func__.15157> "uac_send_tm_callback", line=860, mname=0x7fae77c8c014 "uac") at core/mem/q_malloc.c:511 #4 0x00005614ad7ab410 in qm_shm_free (qmp=0x7fae78e77000, p=0x7fae79805060, file=0x7fae77c8c134 "uac: uac_send.c", func=0x7fae77c8cf10 <__func__.15157> "uac_send_tm_callback", line=860, mname=0x7fae77c8c014 "uac") at core/mem/q_malloc.c:1350 #5 0x00007fae77c3686b in uac_send_tm_callback (t=0x7fae797dcf40, type=131072, ps=0x7fff8bd990d0) at uac_send.c:860 #6 0x00007fae783abc27 in run_trans_callbacks_internal (cb_lst=0x7fae797dcfe8, type=131072, trans=0x7fae797dcf40, params=0x7fff8bd990d0) at t_hooks.c:241 #7 0x00007fae783abd1e in run_trans_callbacks (type=131072, trans=0x7fae797dcf40, req=0x0, rpl=0x0, code=0) at t_hooks.c:261 #8 0x00007fae782bd8cb in free_cell_helper (dead_cell=0x7fae797dcf40, silent=0, fname=0x7fae783e9f62 "timer.c", fline=653) at h_table.c:165 #9 0x00007fae7837649c in wait_handler (ti=724701450, wait_tl=0x7fae797dcff8, data=0x7fae797dcf40) at timer.c:653 #10 0x00005614ad50be68 in timer_list_expire (t=724701450, h=0x7fae78ef5d18, slow_l=0x7fae78ef95e0, slow_mark=33641) at core/timer.c:857 #11 0x00005614ad50c3a7 in timer_handler () at core/timer.c:922 #12 0x00005614ad50c8d5 in timer_main () at core/timer.c:961 #13 0x00005614ad45fbf3 in main_loop () at main.c:1833 #14 0x00005614ad46ae93 in main (argc=14, argv=0x7fff8bd99b48) at main.c:3086 I think it occurs only if $uac_req(evroute) is set to 1 and I define the event_route[uac:reply] route. My uac_reply route is easy: if ($uac_req(evcode)==200) { xlog("L_INFO", "Registration for user $fU has been refreshed successfully."); $sht(vtp=>asterisk_restarted) = $null; route(SAVE_REG); } else { xlog("L_INFO", "Registration failed: $uac_req(evcode)"); } the SAVE_REG route is the following: route[SAVE_REG] { xlog("L_INFO", "Saving pbx registration...:$fU"); $var(maxExpiry) = MAX_PBX_REG_EXPIRY; route(GET_CLIENT_ID); sql_pvquery("ca", "select count(*) from pbxusers where user = '$fU'", "$var(pbxusersCnt)"); if ($var(pbxusersCnt)>0) { if ($var(clientId) == 0) { sql_query("ca", "update pbxusers set expiry = TIMESTAMPADD(SECOND, $var(maxExpiry), SYSDATE()), online=1 where user = '$fU'"); } else { sql_query("ca", "update pbxusers set client_id = '$var(clientId)', expiry = TIMESTAMPADD(SECOND, $var(maxExpiry), SYSDATE()), online=1 where user = '$fU'"); } } else { sql_query("ca", "insert into pbxusers (user, expiry, client_id, online) values ('$fU', TIMESTAMPADD(SECOND, $var(maxExpiry), SYSDATE()), '$var(clientId)', 0)"); } } And GET_CLIENT_ID route is: route[GET_CLIENT_ID] { $var(clientId) = 0; if (is_present_hf("X-AT-ClientId")) { $var(clientId) = $hdr(X-AT-ClientId); } } Any idea, is it a bug or I do something wrong in config files? Peter From: Dr. Barabás Péter via sr-users <sr-users(a)lists.kamailio.org> Date: Sunday, 2023. October 8. 18:49 To: miconda(a)gmail.com <miconda(a)gmail.com>, Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Cc: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com> Subject: [SR-Users] Re: uac_req_send + evroute + crash Hello Daniel, I do not see any “failed to send request with authentication”. The next CRITICAL log appears after calling uac_req_send(): CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f114995ada8), called from uac: uac_send.c: uac_send_tm_callback(860), first free uac: uac_send.c: uac_resend_tm_callback(732) - ignoring Now we use kamailio 5.7.2 and no crash has come, but the critical logs above exist. I saw a ticket in github: https://github.com/kamailio/kamailio/issues/3522, may the crash be similar or the same to that? I will make a try next week with downgrading to 5.6.2 and try to reproduce the crash. Peter From: Daniel-Constantin Mierla <miconda(a)gmail.com> Date: Friday, 2023. October 6. 13:55 To: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com>, Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org> Subject: Re: [SR-Users] uac_req_send + evroute + crash Hello, do you also get error log messages that include "failed to send request with authentication"? Which CRITICAL log appears when you call uac_req_send()? You pasted a couple of them in the initial email? Cheers, Daniel On 05.10.23 17:32, Dr. Barabás Péter wrote: Hello, I used kamailio version 5.6.2. I refreshed to 5.7.2 today. As I remember it was in kamailio long time ago therefore I could skip evroute route. But this CRITICAL log appears always when I call uac_req_send(). I call it with settings: $uac_req(auser) = $var(username); $uac_req(apasswd) = $var(password); Where username and password are retrived from web service before call. In event_route I got first 401 after 200. Peter From: Daniel-Constantin Mierla <miconda(a)gmail.com><mailto:miconda@gmail.com> Date: Thursday, 2023. October 5. 17:25 To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org><mailto:sr-users@lists.kamailio.org> Cc: Dr. Barabás Péter <dr.peter.barabas(a)gmail.com><mailto:dr.peter.barabas@gmail.com> Subject: Re: [SR-Users] uac_req_send + evroute + crash Hello, On 05.10.23 16:34, Dr. Barabás Péter via sr-users wrote: Hi All, I use kamailio In front of Asterisk and kamailio needs to refresh registrations periodically towards Asterisk to ensure the availability of users from Asterisk side. I use uac module and call uac_req_send() for sending REGISTER requests. I set $uac_req(evroute)=1 The event_route[uac:reply] is called fine, but in kamailio logs I see the next lines: CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f114995ada8), called from uac: uac_send.c: uac_send_tm_callback(860), first free uac: uac_send.c: uac_resend_tm_callback(732) - ignoring After some time, kamailio has crashed. CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f114995ada8), called from uac: uac_send.c: uac_send_tm_callback(860), first free uac: uac_send.c: uac_resend_tm_callback(732) – ignoring CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 34 ALERT: <core> [main.c:774]: handle_sigs(): child process 1407950 exited by a signal 6 what version of Kamailio are you using? Is Asterisk challenging for authentication? Does it happen every time or seldom? Cheers, Daniel -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy and Development Services Kamailio Advanced Training - Online - Nov 14-16, 2023 -- asipto.com -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy and Development Services Kamailio Advanced Training - Online - Nov 14-16, 2023 -- asipto.com

4 months, 1 week

Kamailio - Initiating invite on REFER

by Muhammad Danish Moosa

Hi champs, In this flow like endpoint -> B2BUA 1-> kamailio -> B2BUA 2, there is a requirement that REFER should be handled by Kamailio and it should manage the transfer , initiating a new invite based on REFER. Any pointer will be helpful -- Danish

4 months, 2 weeks

Connect to a remote ENUM(E.164 Number Mapping) server

by elhar.mohamed＠gmail.com

Hello, I'm using the Kamailio version 5.7.x, I didn't find in the module "enum.so" any option that allow to connect to a remote ENUM server. Could you please help me ! Thanks in advance

4 months, 3 weeks

Merry Christmas and Happy Holidays 2023-2024!

by Daniel-Constantin Mierla

Kamailio project continued to evolve steadily, a new major release was out during this year, next one planned in a few months, relying on an amazing community of developers and users. We hope it kept helping people and companies world wide to connect with the dear ones and build a better way of living. The season holidays are ahead, time to relax, spend time with family and friends! I take again this chance to express my thanks and greetings to all the friends, developers, supporting companies and community members that made 2023 another fantastic year for Kamailio project. Enjoy the holidays! Merry Christmas! Daniel * Santa is flying Kamailio! * -- Daniel-Constantin Mierla (@ asipto.com) twitter.com/miconda -- linkedin.com/in/miconda Kamailio Consultancy, Training and Development Services Kamailio World Conference - April 18-19, 2024, Berlin

4 months, 3 weeks

kemi python3s - module 'KSR' has no attribute 'nathelper'

by marek

hi, trying kamailio 5.7.3 with KEMI pythons3s sample from https://github.com/kamailio/kamailio/blob/master/misc/examples/kemi/kamaili… trying simple register with sipsak sipsak -U --sip-uri "sip:cervajs@kamailio.example.com" -u cervajs -a top_secret 4(28805) ERROR: PY8 {REGISTER}: app_python3s [apy3s_kemi.c:141]: apy3s_exec_func(): error exception occurred 4(28805) ERROR: PY8 {REGISTER}: app_python3s [apy3s_exception.c:167]: apy3s_handle_exception(): apy3s_exec_func: ksr_request_route((null)): Unhandled exception in the Python code: Traceback (most recent call last): File "/etc/kamailio/kamailio.py", line 31, in ksr_request_route if ksr_route_natdetect()==-255 : File "/etc/kamailio/kamailio.py", line 238, in ksr_route_natdetect if KSR.nathelper.nat_uac_test(19)>0 : AttributeError: module 'KSR' has no attribute 'nathelper' i see nat_uac_test in doc https://kamailio.org/docs/tutorials/5.7.x/kamailio-kemi-framework/modules/#… any tips/ideas? happy christmas Marek

4 months, 4 weeks

Errors with TLS

by SAMUEL MOYA TINOCO

Hi everyone, All my environment was working properly. But a few days ago I've started to have problems with my websocket connectios. Everytime I try to register my websocket Kamailio log this Dec 20 09:02:10 prod-kamailio /usr/sbin/kamailio[599]: ERROR: tls [tls_server.c:1330]: tls_h_read_f(): protocol level error Dec 20 09:02:10 prod-kamailio /usr/sbin/kamailio[599]: ERROR: tls [tls_util.h:50]: tls_err_ret(): TLS accept:error:0A000416:SSL routines::sslv3 alert certificate unknown (sni: unknown) Dec 20 09:02:10 prod-kamailio /usr/sbin/kamailio[599]: ERROR: tls [tls_server.c:1334]: tls_h_read_f(): src addr: IP_webclient:61423 Dec 20 09:02:10 prod-kamailio /usr/sbin/kamailio[599]: ERROR: tls [tls_server.c:1337]: tls_h_read_f(): dst addr: IP_Kamailio:8443 Dec 20 09:02:10 prod-kamailio /usr/sbin/kamailio[599]: ERROR: <core> [core/tcp_read.c:1476]: tcp_read_req(): ERROR: tcp_read_req: error reading - c: 0x7fbc423053b0 r: 0x7fbc423054d8 (-1) My tls.cfg: [server:default] method = TLSv1.2+ verify_certificate = no require_certificate = yes private_key = /etc/kamailio/cert/clave_SSL.key certificate = /etc/kamailio/cert/certificado.pem Kamailio version: root@prod-kamailio:/etc/kamailio# kamailio -v version: kamailio 5.6.3 (x86_64/linux) flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: unknown compiled with gcc 12.2.0 I don't know why it stopped working. And I'm not sure what to do or what to check. Has anyone faced this problem? Any help would be appreciated Thanks in advance Samuel Moya Tinoco Departamento de Sistemas y Redes Móvil: (+34) 606985997 smoya(a)vivelibre.es<mailto:smoya@vivelibre.es> [cid:image001.png@01DA33E6.D2D833D0] Soluciones inteligentes para la autonomía personal

5 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2023