sr-users October 2023

sr-users@lists.kamailio.org

47 participants
44 discussions

Getting the name of an already set onreply_route

by Denys Pozniak

Hello! Is it possible to find out the name of the onreply_route that was set before? Something like this: t_on_reply("MANAGE_REPLY"); ... if ( t_is_set("onreply_route") ) { get_onreply_route_name(); ... } -- BR, Denys Pozniak

1 month, 2 weeks

Via header force change protocol to TLS?

by Anthony Alba

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

6 months

Dialog and DMQ on restart

by Björn Klasen

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

8 months, 1 week

5.6.4 debian htable dbmode=1 not writing at shutdown

by Bernd Krueger-Knauber

Hi, I have still the problem that my htables are not written into a sqlite db when I shutdown kamailio. Manual writing via: kamcmd htable.store ... is working. As I can see in the logs with highest loglevel, the function destroy() is never called. ht_db_url.len is > 0 ht_db_init_con() should work, else nothing would work with the db. But I can not see the debug messages from ht_db_open_con() Any ideas? Best regards, Bernd

12 months

PLMN 31501 , VoLTE IMS Kamalio

by snahmed.snahmed＠gmail.com

Hi, I was able to test the PLMN 00101 for VoLTE, but unable to test it with other PLMNs. I am specifically looking to have a successful test with PLMN31501. VoLTE is not enabling once I configure it. I followed this https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/ Any one has experience for PLMN 315?

1 year

Registrar / Path

by Jawaid Bazyar

Hi, I have a scenario where I have an edge proxy (named RS), which locally stores registrations from Endpoints in its USRLOC, but which then also forward's REGISTER requests on to another proxy (named CN), which stores registrations in its USRLOC. (which then does DMQ with another CN like it). Both RS and CN are storing Path information, for example: kamctl ul show displays on both RS and CN: "Path": "sip:vs-rs01.blah.foo.bar;lr;received=sip:3.4.5.6:33577", So I know the path info is in there. I want CN , when presented with an INVITE, to reply with a 302 Redirect. Right now I have this: if (!lookup("location",sip:$tU@nodomain)) { } reg_fetch_contacts("location", "$tu", "called"); xlog("location info $ulc(called=>path)"); sl_send_reply("302","Redirect"); and the xlog does display the path. Good, so I have it being sent all the way through RS and CN and into CN’s USRLOC. but this isn’t complete. I am now faced with two issues. One, I need to mangle the Path into a Contact header for the Redirect. Two, I need to delete the Contact header that sl_send_reply is putting on there, which is the Contact as RS sees it from the endpoint. This needs to be removed and replaced with a Contact of only the RS server. It feels like there ought to be a simpler way to do this than parsing the Path string and reassembling a Contact from it, but if there is it's not readily apparent. Both Google and chatgpt have failed me :) Thanks in advance, Jawaid

1 year

Kamailio 5.7 still segfaulting on TLS with Ubuntu Jammy

by Benoît Panizzon

Hi Gang I just updated our dev plattform from 5.6 to 5.7 5.5 was working fine with TLS under Ubuntu Focal. 5.6 under Jammy started to dump cores. 5.7 still shows the same behaviour, usually shortly after a restart. Oct 20 09:45:01 dev-cpereg01 kamailio[11925]: CRITICAL: <core> [core/mem/q_malloc.c:519]: qm_free(): BUG: freeing already freed pointer (0x7f1bb0dd4bd8), called from tls: tls_init.c: ser_free(405), first free tls: tls_init.c: ser_free(405) - ignoring Oct 20 09:45:11 dev-cpereg01 kamailio[11905]: ALERT: <core> [main.c:776]: handle_sigs(): child process 11924 exited by a signal 11 Oct 20 09:45:11 dev-cpereg01 kamailio[11905]: ALERT: <core> [main.c:779]: handle_sigs(): core was generated Could anyone point me the correct direction on how to fix this issue? Am I the only one seeing this issue? -- Mit freundlichen Grüssen -Benoît Panizzon- @ HomeOffice und normal erreichbar -- I m p r o W a r e A G - Leiter Commerce Kunden ______________________________________________________ Zurlindenstrasse 29 Tel +41 61 826 93 00 CH-4133 Pratteln Fax +41 61 826 93 01 Schweiz Web http://www.imp.ch ______________________________________________________

1 year

RPM Repos Maintenance Needed

by tyler moore

Hi All, I started a discussion on the matrix channel about some 404 RPM repos and wanted to bring it here to further discuss. We typically configure our various RPM-based package managers to allow patch updates from the repos. As an example, if trying to install 5.7.x, can be done as follows: |yum -y install yum-utils yum-config-manager --add-repo https://rpm.kamailio.org/centos/kamailio.repo yum-config-manager --disable \* yum-config-manager --enable kamailio-5.7 yum install kamailio | This will fail though because https://rpm.kamailio.org/centos/7/5.7/5.7/x86_64/ does not exist. Throughout the repos for centos/rhel/fedora I found the existence of packages is inconsistent. We can tell the intention was to allow the above behavior as the kamailio.repo comes with the above configuration. The above example will update /etc/yum.repos.d/kamailio.repo as follows: |[kamailio-5.7] name=Kamailio - 5.7 - Packages for the latest Kamailio 5.7 release baseurl=https://rpm.kamailio.org/centos/$releasever/5.7/5.7/$basearch/ enabled=1 metadata_expire=30d repo_gpgcheck=0 gpgkey=https://rpm.kamailio.org/rpm-pub.key type=rpm skip_if_unavailable=True | That is for centos though, and I found that some of the other distros have incomplete kamailio.repo files as well. In example, the rhel kamailio.repo is missing separate entries for 5.7, but it does exist in the centos version. Looks like some small cleanup is in order to make the end user experience more consistent. I believe sergey was maintaining those repos last, please chime in here if you can. If needed I can pick up some of those responsibilities as well. -- Regards, *Tyler Moore* <https://devopsec.net/> Full Stack Software Engineer <http://www.google.com/search?q=full+stack+software+engineer+job+description> Flyball Labs <http://goflyball.com/> Office: 888-907-2085, ext: 34 <tel:8889072085;ext=34> Cell: 248-909-2769 <tel:2489092769> Email: tmoore(a)goflyball.com FLYBALL TECHNICAL SOLUTIONS, LLC <http://flyballlabs.com/> -- Tyler Moore Regards, *Tyler Moore* <https://devopsec.net/> Full Stack Software Engineer <http://www.google.com/search?q=full+stack+software+engineer+job+description> Flyball Labs <http://goflyball.com/> Office: 888-907-2085, ext: 34 <tel:8889072085;ext=34> Cell: 248-909-2769 <tel:2489092769> Email: tmoore(a)goflyball.com FLYBALL TECHNICAL SOLUTIONS, LLC <http://flyballlabs.com/>

1 year

RPM Repos Maintenance Needed

by tyler moore

Hi All, I started a discussion on the matrix channel about some 404 RPM repos and wanted to bring it here to further discuss. We typically configure our various RPM-based package managers to allow patch updates from the repos. As an example, if trying to install 5.7.x, can be done as follows: yum -y install yum-utils yum-config-manager --add-repo https://rpm.kamailio.org/centos/kamailio.repo yum-config-manager --disable \* yum-config-manager --enable kamailio-5.7 yum install kamailio This will fail though because https://rpm.kamailio.org/centos/7/5.7/5.7/x86_64/ does not exist. Throughout the repos for centos/rhel/fedora I found the existence of packages is inconsistent. We can tell the intention was to allow the above behavior as the kamailio.repo comes with the above configuration. The above example will update /etc/yum.repos.d/kamailio.repo as follows: [kamailio-5.7] name=Kamailio - 5.7 - Packages for the latest Kamailio 5.7 release baseurl=https://rpm.kamailio.org/centos/$releasever/5.7/5.7/$basearch/ enabled=1 metadata_expire=30d repo_gpgcheck=0 gpgkey=https://rpm.kamailio.org/rpm-pub.key type=rpm skip_if_unavailable=True That is for centos though, and I found that some of the other distros have incomplete kamailio.repo files as well. In example, the rhel kamailio.repo is missing separate entries for 5.7, but it does exist in the centos version. Looks like some small cleanup is in order to make the end user experience more consistent. I believe sergey was maintaining those repos last, please chime in here if you can. If needed I can pick up some of those responsibilities as well. Regards, Tyler Moore Full Stack Software Engineer Flyball Labs Office: 888-907-2085, ext: 34 Cell: 248-909-2769 Email: tmoore(a)goflyball.com

1 year, 1 month

Kamailio 5.4.3 Troubleshooting Traffic Blocking Issue After Docker and OpenSSL Update

by Pintu Lohar

Hi All, We have recently encountered a challenging issue in our environment that I wanted to bring to your attention. A few months ago, we performed updates to our Docker and OpenSSL installations, upgrading OpenSSL to version 1.1.1u. Since then, we have been experiencing intermittent traffic blocking (TLS and UDP both for around 10 minutes and getting recovered) on some of our instances. Prior to the OpenSSL upgrade, we had not observed any such issues. However, the situation has become more complex due to a substantial increase in traffic, with each instance now handling 4K-5K concurrent calls and a daily total of approximately 200,000 calls per instance. Our initial suspicion was related to a Docker iptable issue. To investigate further, we conducted a GDB trace using "kamctl pstrap" and discovered specific log entries indicating potential issues within the "pthread_rwlock_wrlock" function. This has prompted us to explore whether the problems are linked to the OpenSSL upgrade. We are considering upgrading Kamailio to the latest version, although this process typically requires a significant amount of time for proper planning and testing. Given the high volume of calls we are currently handling, we are also exploring the possibility of a temporary solution involving a rollback of the OpenSSL version to see if it resolves the issue. Curiously, during a recent load test using SIPP, which simulated 10,000 concurrent calls with a rate of 100 calls per second, we did not encounter the same problem. any hints or insights you may have that could help us pinpoint the root cause of the problem . We do have a complete GDB trace available, but its size necessitates sharing a truncated version for now. version: kamailio 5.4.3 (x86_64/linux) 0178a5 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 0178a5 compiled on 12:36:56 Oct 22 2023 with gcc 4.8.5 Operating System Host : LSB Version: :core-4.1-amd64:core-4.1-noarch Distributor ID: Rocky Description: Rocky Linux release 8.8 (Green Obsidian) Release: 8.8 Codename: GreenObsidian container os (Centos7) Kamctl pstraip output (truncated to last few lines) ---start 154 ----------------------------------------------------- kamailio: No such file or directory. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". 0x00007fbf6f38a0c3 in __epoll_wait_nocancel () from /lib64/libc.so.6 $1 = 82 $2 = {pid = 154, unix_sock = 182, idx = 27, status = 1, rank = 48, desc = "tcp receiver (tcp:xxx.xxx.xxx.xx:5060 <http://223.62.234.57:5060/>) child=27", '\000' <repeats 81 times>} #0 0x00007fbf6f38a0c3 in __epoll_wait_nocancel () from /lib64/libc.so.6 No symbol table info available. #1 0x0000000000684858 in io_wait_loop_epoll (h=0xb41720 <io_w>, t=2, repeat=0) at core/io_wait.h:1039 n = 84 r = 0 fm = 0x2 revents = 8201656 __FUNCTION__ = "io_wait_loop_epoll" #2 0x0000000000699e7a in tcp_receive_loop (unix_sock=186) at core/tcp_read.c:1997 __FUNCTION__ = "tcp_receive_loop" #3 0x00000000005279e7 in tcp_init_children () at core/tcp_main.c:5134 r = 27 i = -1 reader_fd_1 = 186 pid = 0 si_desc = "tcp receiver (tcp:xxx.xx.xxx.xxx:5060 <http://223.62.234.57:5060/> )\000\000\000\355\217c\000\000\000\000\000\240\213{\001\001\000\000\000\017\000\000\000\000\000\000\000\250\a2o\276\177\000\000\200\b\231o\000\000\000\000\260\006\346\261\376\177\000\000\230\210w\000\000\000\000\000=\000\000\000>\000\000\000\270\016z\350\274\177\000\000\060;8o\002\000\000\000P\224\346\352\001\000\000" si = 0x0 __FUNCTION__ = "tcp_init_children" #4 0x000000000042ae66 in main_loop () at main.c:1771 i = 16 pid = 94 si = 0x0 si_desc = "udp receiver child=15 sock=xxxx.xxx.xxx.xx:5060\000\000\000\v\235\200", '\000' <repeats 13 times>, "P\r\346\261\376\177\000\000\270%}\000\000\000\000\000T\000\000\000\000\000\000\000\060;8o\277\177\000\000\343\207\201\000\000\000\000\000\277;8o\277\177\000\000 \271A\000\000\000\000\000@\374Ko\276\177\000" nrprocs = 16 woneinit = 1 __FUNCTION__ = "main_loop" #5 0x0000000000433ad6 in main (argc=9, argv=0x7ffeb1e60e38) at main.c:2856 cfg_stream = 0x16c9010 c = -1 r = 0 tmp = 0x7ffeb1e61f0c "" tmp_len = 2496 port = 2496 proto = 1472 ahost = 0x0 aport = 0 options = 0x7d5238 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2208520674 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7fbf6f40f3a0 <intel_02_known> p = 0xf0b5ff <Address 0xf0b5ff out of bounds> st = {st_dev = 76, st_ino = 120506675, st_nlink = 2, st_mode = 16877, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1698340416, tv_nsec = 618631009}, st_mtim = {tv_sec = 1698340416, tv_nsec = 618631009}, st_ctim = {tv_sec = 1698340416, tv_nsec = 618631009}, __unused = {0, 0, 0}} tbuf = '\000' <repeats 376 times>... option_index = 0 long_options = {{name = 0x7d742f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7d2a34 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7d7434 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7d743a "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0x7d7440 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x7d7449 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7d7453 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7d745d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0x7d7468 "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x7d7471 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7d747c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __FUNCTION__ = "main" [Inferior 1 (process 154) detached] ---end 154 ------------------------------------------------------- ---start 155 ----------------------------------------------------- kamailio: No such file or directory. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". 0x00007fbe6e5bd39e in pthread_rwlock_wrlock () from /lib64/libpthread.so.0 $1 = 83 $2 = {pid = 155, unix_sock = -1, idx = -1, status = 1, rank = -4, desc = "tcp main process", '\000' <repeats 111 times>} #0 0x00007fbe6e5bd39e in pthread_rwlock_wrlock () from /lib64/libpthread.so.0 No symbol table info available. #1 0x00007fbe68b745c9 in CRYPTO_THREAD_write_lock () from /lib64/libcrypto.so.1.1 No symbol table info available. #2 0x00007fbe68afe07e in CRYPTO_free_ex_data () from /lib64/libcrypto.so.1.1 No symbol table info available. #3 0x00007fbe68ea52c2 in SSL_free () from /lib64/libssl.so.1.1 No symbol table info available. #4 0x00007fbe69149480 in tls_h_tcpconn_clean_f (c=0x7fbceeae00d0) at tls_server.c:655 extra = 0x7fbceec3b898 __FUNCTION__ = "tls_h_tcpconn_clean_f" #5 0x00000000004fbf2d in _tcpconn_free (c=0x7fbceeae00d0) at core/tcp_main.c:1529 __FUNCTION__ = "_tcpconn_free" #6 0x0000000000510912 in tcpconn_put_destroy (tcpconn=0x7fbceeae00d0) at core/tcp_main.c:3284 __FUNCTION__ = "tcpconn_put_destroy" #7 0x00000000005156a5 in handle_tcp_child (tcp_c=0x7fbe6f813440, fd_i=-1) at core/tcp_main.c:3723 tcpconn = 0x7fbceeae00d0 response = {140449434960080, -2} cmd = -2 bytes = 16 n = 1865551792 t = 887186228 crt_timeout = 410 con_lifetime = 57680 __FUNCTION__ = "handle_tcp_child" #8 0x00000000005208ed in handle_io (fm=0x7fbe6f9d7c78, ev=1, idx=-1) at core/tcp_main.c:4542 ret = 1 __FUNCTION__ = "handle_io" #9 0x00000000004e93ed in io_wait_loop_epoll (h=0xad5740 <io_h>, t=5, repeat=0) at core/io_wait.h:1070 n = 1 r = 0 fm = 0x7fbe6f9d7c78 revents = 1 __FUNCTION__ = "io_wait_loop_epoll" #10 0x0000000000523c99 in tcp_main_loop () at core/tcp_main.c:4827 si = 0x0 r = 28 __FUNCTION__ = "tcp_main_loop" #11 0x000000000042b1be in main_loop () at main.c:1779 i = 16 pid = 0 si = 0x0 si_desc = "udp receiver child=15 sock=xxx.xx.xxx.xxx:5060 <http://223.62.234.76:5060/>\000\000\000\v\235\200", '\000' <repeats 13 times>, "P\r\346\261\376\177\000\000\270%}\000\000\000\000\000T\000\000\000\000\000\000\000\060;8o\277\177\000\000\343\207\201\000\000\000\000\000\277;8o\277\177\000\000 \271A\000\000\000\000\000@\374Ko\276\177\000" nrprocs = 16 woneinit = 1 __FUNCTION__ = "main_loop" #12 0x0000000000433ad6 in main (argc=9, argv=0x7ffeb1e60e38) at main.c:2856 cfg_stream = 0x16c9010 c = -1 r = 0 tmp = 0x7ffeb1e61f0c "" tmp_len = 2496 port = 2496 proto = 1472 ahost = 0x0 aport = 0 options = 0x7d5238 ":f:cm:M:dVIhEeb:l:L:n:vKrRDTN:W:w:t:u:g:P:G:SQ:O:a:A:x:X:Y:" ret = -1 seed = 2208520674 rfd = 4 debug_save = 0 debug_flag = 0 dont_fork_cnt = 0 n_lst = 0x7fbf6f40f3a0 <intel_02_known> p = 0xf0b5ff <Address 0xf0b5ff out of bounds> st = {st_dev = 76, st_ino = 120506675, st_nlink = 2, st_mode = 16877, st_uid = 0, st_gid = 0, __pad0 = 0, st_rdev = 0, st_size = 40, st_blksize = 4096, st_blocks = 0, st_atim = {tv_sec = 1698340416, tv_nsec = 618631009}, st_mtim = {tv_sec = 1698340416, tv_nsec = 618631009}, st_ctim = {tv_sec = 1698340416, tv_nsec = 618631009}, __unused = {0, 0, 0}} tbuf = '\000' <repeats 376 times>... option_index = 0 long_options = {{name = 0x7d742f "help", has_arg = 0, flag = 0x0, val = 104}, {name = 0x7d2a34 "version", has_arg = 0, flag = 0x0, val = 118}, {name = 0x7d7434 "alias", has_arg = 1, flag = 0x0, val = 1024}, {name = 0x7d743a "subst", has_arg = 1, flag = 0x0, val = 1025}, {name = 0x7d7440 "substdef", has_arg = 1, flag = 0x0, val = 1026}, {name = 0x7d7449 "substdefs", has_arg = 1, flag = 0x0, val = 1027}, {name = 0x7d7453 "server-id", has_arg = 1, flag = 0x0, val = 1028}, {name = 0x7d745d "loadmodule", has_arg = 1, flag = 0x0, val = 1029}, {name = 0x7d7468 "modparam", has_arg = 1, flag = 0x0, val = 1030}, {name = 0x7d7471 "log-engine", has_arg = 1, flag = 0x0, val = 1031}, {name = 0x7d747c "debug", has_arg = 1, flag = 0x0, val = 1032}, {name = 0x0, has_arg = 0, flag = 0x0, val = 0}} __FUNCTION__ = "main" [Inferior 1 (process 155) detached] ---end 155 ------------------------------------------------------- Thanks & Regards Pintu Lohar

1 year, 1 month

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users October 2023