sr-users September 2022

sr-users@lists.kamailio.org

41 participants
52 discussions

Via header force change protocol to TLS?

by Anthony Alba

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

5 months, 3 weeks

Dialog and DMQ on restart

by Björn Klasen

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

8 months

Is Min-SE check broken?

by harneet singh

Hi All, I am facing an issue in understanding how the min_se should be working in kamailio. As per the SST documentation, it seems like if the min_se is configured as 500, then any value of Session-Expires OR MIN-SE if lower than 500, can be responded to by a 422. However, I strangely see the reverse happening. To investigate further, I looked in to the ki_sst_check_min() code in the master, and these seems like a potential issue. Ref Code: Inside ki_sst_check_min(), there is an if condition like below: if (sst_min_se < MIN(minse, se.interval)) { However, shouldn't it be the other way around? ie if (sst_min_se > MIN(minse, se.interval)) { because we need to send 422 if the received value(in INVITE etc) is smaller than the sst configure min_se value? I also found a different documentation, at https://git.sgu.ru/oldssu/ex-opensips/blob/cb9df8d59dbb254a9d862569fd5d11f6… where the check is as below? if (sst_min_se > MIN(minse, se.interval)) { Can someone confirm if this is broken, or my understanding is incorrect? Regards, Harneet -- "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth" - Sir Arthur Conan Doyle

1 year, 5 months

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK

by Daniel Tryba

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

1 year, 6 months

enable topology hiding on one side or dynamic ip in topoh module Contact and Via Header

by Patrick Karton

Hello , im using kamailio with two interfaces external and internal. i need a way either to : * enable topoh hiding only when outgoing interface is external ( mask contact and Via ip only when ougoing interface is external * or if it is not possible to enable it only in one direction.i want to know how to configure dynamic(for example in xavp or avp) ip to put in Contact and Via when topoh is enabled. i see that the 'mask_ip' parameter of topoh module is a string. so we can not set a dynamic value here unfortunately. Thanks

1 year, 9 months

kamcmd autocompletion

by Antoine DEBARRE

Hi, I just installed kamailio v5.5 via deb.kamailio.org packages (debian 11). Seems that kamcmd autocompletion doesn't work at all. It is OK for v5.4 via official debian packages (packages.debian.org/bullseye/kamailio) Best regards, -- <https://app.livestorm.co/comdata-group/metaverse-what-will-cx-look-like-in-…>

2 years

Kill child process created by app_python module

by Marat Gareev

Hello! I'm trying to use app_python module to perform periodic actions. This is a simple python code def _update(): while True: _action() time.sleep(60) class noop_handler: def child_init(self, rank): return 0 def ksr_request_route(self, msg): return 1 def mod_init(): # signal.signal(signal.SIGTERM, signal.default_int_handler) proc = multiprocessing.Process(target=_update) # proc.daemon = True proc.start() ksr.notice('Forked process {} to update\n'.format(proc.pid)) return noop_handler() After killing kamailio processes with SIGTERM signal (killall kamailio) I see zombie process. And if I try to process the signal in daemon mode (see the comments in the snippet above), I get critical errors in the logs and still see processes: 0(37001) NOTICE: <core> [core/kemi.c:124]: sr_kemi_core_notice(): Forked process 37002 to update 1(37003) ERROR: <core> [core/udp_server.c:464]: udp_rcv_loop(): recvfrom:[4] Interrupted system call Process Process-1: Traceback (most recent call last): File "/usr/lib64/python2.7/multiprocessing/process.py", line 258, in _bootstrap self.run() File "/usr/lib64/python2.7/multiprocessing/process.py", line 114, in run self._target(*self._args, **self._kwargs) File "/tmp/script.py", line 155, in _update time.sleep(period) KeyboardInterrupt 0(37001) ALERT: <core> [main.c:774]: handle_sigs(): child process 37002 exited normally, status=1 0(37001) INFO: <core> [main.c:802]: handle_sigs(): terminating due to SIGCHLD 1(37003) ERROR: <core> [core/udp_server.c:464]: udp_rcv_loop(): recvfrom:[4] Interrupted system call 8(37014) CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 4 1(37003) ERROR: <core> [core/udp_server.c:464]: udp_rcv_loop(): recvfrom:[4] Interrupted system call So, how I can kill child process by SIGTERM signal?

2 years

Pipelimit needs restart to reload values

by Duarte Rocha

Greetings, I've been using the pipelimit module and the pl_check function to control users rates in my proxy. if (!pl_check("$var(UserID)", "TAILDROP", "$var(UserRate)")) { pl_drop(); exit; } In this case $var(UserID) is the pipe and $var(UserRate) is the maximum rate. The value of the rate is retrieved on every call via query to a DB. If I change the UserRate value to 0 CPS on the DB calls are not rejected unless they go over 1 CPS. However, if I restart Kamailio all calls are correctly rejected. Why does this happen? Can I change this behaviour? Cheers, Duarte

2 years

Recommended openSSL version

by Igor Olhovskiy

Hello! Due to I still experience irregular Kamailio 5.4 crashes (like 1/month) related to SSL (using websockets and SIPS) I'm wondering, could openSSL upgrade change the situation? As of now in CentOS 7 I have 1.0.2k version. Does anyone have experience to fix crash-related to TLS problems with openSSL upgrade? Or maye some tuneup of TCP parameters can help here?My current setup is quite simple: children=4 enable_tls=yes tcp_accept_no_cl=yes tcp_connection_lifetime=600 tcp_max_connections=998976 # 1000000 - 1024, so we're leaving 1k for system reserve tls_max_connections=998976 Number of clients ~ 200 constantly connected to websocket. -- Best regards, Igor

2 years, 1 month

Testing dialog module (and acc with dialog cdrs)

by Daniel-Constantin Mierla

Hello, as I am not a user of dialog variables, I am turning to community to ask for help testing the current master branch with configurations that make use of dialog variables and acc dialog-based cdr generation. With a few reports of issues related to dialog modules and unexpected crashes, I looked over the code and noticed that the access of the value for dialog variables was not protected, making them vulnerable of invalid memory access in case of the variable was updated by another process or dialog was terminated. I introduced a couple of new functions to try to cover different use cases of getting the dlg variable values, dialog management code was not affected, but given that these commits need to be backported to stable branch (5.6), I want to get proper feedback from community that things work fine. A previous attempt of a simpler fix was not enough, having side effects to acc module for dialog-based cdr generation, because it was keeping referenced to many dlg variables at the same time. In short, it would be appreciated any feedback on testing dialog and acc with dialog-based cdr generation using git master branch. Cheers, Daniel -- Daniel-Constantin Mierla -- www.asipto.com www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - Online Nov 7-10, 2022 (Europe Timezone) * https://www.asipto.com/sw/kamailio-advanced-training-online/

2 years, 1 month

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2022