sr-users December 2022

sr-users@lists.kamailio.org

54 participants
62 discussions

by Björn Klasen

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

1 month

Increase MAX_BRANCHES_LIMIT

by Lars Jansson

Hi, I am building a configuration script where for some traffic flows parallel forking will be needed, and in this case I need to go beyond the default max limit of the max amount of branches. Apart from this specific case the traffic load that kamailio will need to handle is very low, let's say just one second here and there with up to 5 concurrent calls at most. This limit is as far as I understand set here: usr/local/src/kamailio-5.6/kamailio/src/core/config.h And the default limit is: #define MAX_BRANCHES_LIMIT 32 /*!< limit of maximum number of branches per transaction */ Here are the questions I have related to this: 1) If I increase the value of this constant in config.h, how high is it reasonable to set this value and still have a stable system? 2) If I increase MAX_BRANCHES_LIMIT beyond 32, are there also other parameters that needs to be changed for the system to be able to cope, and if so whichparameters? Regards, Lars

7 months, 1 week

Is Min-SE check broken?

by harneet singh

Hi All, I am facing an issue in understanding how the min_se should be working in kamailio. As per the SST documentation, it seems like if the min_se is configured as 500, then any value of Session-Expires OR MIN-SE if lower than 500, can be responded to by a 422. However, I strangely see the reverse happening. To investigate further, I looked in to the ki_sst_check_min() code in the master, and these seems like a potential issue. Ref Code: Inside ki_sst_check_min(), there is an if condition like below: if (sst_min_se < MIN(minse, se.interval)) { However, shouldn't it be the other way around? ie if (sst_min_se > MIN(minse, se.interval)) { because we need to send 422 if the received value(in INVITE etc) is smaller than the sst configure min_se value? I also found a different documentation, at https://git.sgu.ru/oldssu/ex-opensips/blob/cb9df8d59dbb254a9d862569fd5d11f6… where the check is as below? if (sst_min_se > MIN(minse, se.interval)) { Can someone confirm if this is broken, or my understanding is incorrect? Regards, Harneet -- "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth" - Sir Arthur Conan Doyle

11 months

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK

by Daniel Tryba

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

12 months

Rtpengine: no audio after kernelization.

by Michel Pelletier

Hello, I am proxying all RTP through RTPEngine. Everything works fine until about 5 seconds into the call, when rtpengine enters kernelization, after which all RTP forwarding ceases. I've checked the required iptables entries, and all looks good. Here is a description of my environment: # cat os-release PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" # kamailio -v version: kamailio 5.6.2 (x86_64/linux) 54a9c1 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES, TLS_PTHREAD_MUTEX_SHARED ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 54a9c1 compiled on 16:02:49 Dec 1 2022 with gcc 10.2.1 # rtpengine -v Version: 11.1.1.3-1~bpo11+1 Michel Pelletier

1 year

enable topology hiding on one side or dynamic ip in topoh module Contact and Via Header

by Patrick Karton

Hello , im using kamailio with two interfaces external and internal. i need a way either to : * enable topoh hiding only when outgoing interface is external ( mask contact and Via ip only when ougoing interface is external * or if it is not possible to enable it only in one direction.i want to know how to configure dynamic(for example in xavp or avp) ip to put in Contact and Via when topoh is enabled. i see that the 'mask_ip' parameter of topoh module is a string. so we can not set a dynamic value here unfortunately. Thanks

1 year, 2 months

Kamailio not responding after stress test

by Igor Olhovskiy

Hello, I'm continuing investigations on Kamailio and stress test. Got it again in the state where it's not accepting any new TCP/TLS connections (UDP still works though), but all looks good from lsof/netnstat part, like system is not reporting any zombie connections. Restart of Kamailio process helps This time I got output of kamctl trap Put it here: https://pastebin.com/iYrNZ8U9 kamailio --version version: kamailio 5.6.2 (x86_64/linux) 54a9c1 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 54a9c1 compiled on 14:01:01 Oct 18 2022 with gcc 4.8.5 It's statically linked with tlsa pointing on openssl-1.1.1q Settings related to TLS are: fork=yes children=4 tcp_children=12 enable_tls=yes tcp_accept_no_cl=yes tcp_max_connections=63536 tls_max_connections=63536 tcp_accept_aliases=no tcp_async=yes tcp_connect_timeout=10 tcp_conn_wq_max=63536 tcp_crlf_ping=yes tcp_delayed_ack=yes tcp_fd_cache=yes tcp_keepalive=yes tcp_keepcnt=3 tcp_keepidle=30 tcp_keepintvl=10 tcp_linger2=30 tcp_rd_buf_size=80000 tcp_send_timeout=10 tcp_wq_blk_size=2100 tcp_wq_max=10485760 open_files_limit=63536 Can you please help to read gdb output and understand where I missed in config? Thanks in advance! -- Best regards, Ihor (Igor)

1 year, 3 months

How to have Kamailio retry backends

by Unai Rodriguez

Dear List, We’re using Kamailio to load balance MRCP requests to multiple backend groups with a configuration as follows: # kamailio.cfg ... ... route[DISPATCH] { if($ua=="mrcp_backend_1") { if(!ds_select_dst("1", "4")) { send_reply("404", "No destination"); exit; } } if($ua=="mrcp_backend_2") { if(!ds_select_dst("2", "4")) { send_reply("404", "No destination"); exit; } } xlog("L_DBG", "--- SCRIPT: going to <$ru> via <$du>\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } ... ... # dispatcher.list 1 sip:mrcp01.server.int:8060;transport=tcp 1 sip:mrcp02.server.int:8060;transport=tcp 2 sip:mrcp03.server.int:8060;transport=tcp 2 sip:mrcp04.server.int:8060;transport=tcp With this configuration, Kamailio load balances the initial SIP INVITE among the MRCP servers. After the INVITE, the service communicates directly to the MRCP servers via SIP (for hanging up the call), MRCPv2 (for sending speech control messages), and RTP (for sending audio). We would like to implement a configurable number of retries, so that if a particular backend times out, Kamailio would retry X times to other backend(s). In short, something equivalent to HAProxy’s retries, but for Kamailio. This probably implies having Kamailio always as part of our communication (not just load balancing the initial SIP INVITE). I haven’t been able to find much information about this, could someone provide some pointers? Thank you so much With best wishes, Unai Rodriguez

1 year, 3 months

Recover call in ringing state

by Devang Dhandhalya

Hello All I have below setup : SBC -> kamailio -> Media server(remote) -> web-client Call comes from sbc to kamilio and it relays to Remote server to end user, In Ringing state if remote server goes down then in kamailio there is any way to Recover that ringing call like we can generate new invite for other Remote server which is active state, for relaying call i am using dispatcher module.. I tried with tm.cancel RPC command but it works only if the remote server is running , when I crash the remote server at that time tm.cancel is not generating cancel to remote server. Please suggest if there is any other way to generate INVITE. Regards Devang Dhandhalya -- * <https://www.ecosmob.com/> * *Disclaimer* In addition to generic Disclaimer which you have agreed on our website, any views or opinions presented in this email are solely those of the originator and do not necessarily represent those of the Company or its sister concerns. Any liability (in negligence, contract or otherwise) arising from any third party taking any action, or refraining from taking any action on the basis of any of the information contained in this email is hereby excluded. *Confidentiality* This communication (including any attachment/s) is intended only for the use of the addressee(s) and contains information that is PRIVILEGED AND CONFIDENTIAL. Unauthorized reading, dissemination, distribution, or copying of this communication is prohibited. Please inform originator if you have received it in error. *Caution for viruses, malware etc.* This communication, including any attachments, may not be free of viruses, trojans, similar or new contaminants/malware, interceptions or interference, and may not be compatible with your systems. You shall carry out virus/malware scanning on your own before opening any attachment to this e-mail. The sender of this e-mail and Company including its sister concerns shall not be liable for any damage that may incur to you as a result of viruses, incompleteness of this message, a delay in receipt of this message or any other computer problems.

1 year, 3 months

Localy generate BYE message from ims_charging

by masoud96＠mail.ru

Hello! I have a problem with writing the BYE message from the ACC module to the database, because the messages are generated locally by the ims_charging module at the end of the credit and the flag will not work. You can help catch such local messages and make a record in the database.

1 year, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users December 2022