sr-users November 2022

sr-users@lists.kamailio.org

42 participants
60 discussions

Support for TLS server_name extension (aka SNI=server name indication)
by Barry Flanagan 04 Sep '25

04 Sep '25

Hi, Back in Kamailio 1.5, the release notes state: "support for TLS server_name extension (aka SNI=server name indication)" However, I cannot find any indication of this in the current TLS docs, and trying to set tls_server_name or server_name in tls.cfg fails with "unsupported option". Is this actually supported? Thanks. -Barry Flanagan

5 7

[4.2] how to send out BYE successfully to close a TCP/TLS connection which misses the connection ID?
by Jack Wang 02 Sep '25

02 Sep '25

For some reasons, My settings will cause kamailio to be restarted even if there were connections connected to it. And when one SIP client in a connection wanted to hangup the call with a WebRTC Client (SIP over websocket) after the proxy-restarting, local client was closed, however , the other side was not. >From the log below it seems that the connection missed. Jan 30 18:19:31 ./kamailio[27857]: WARNING: <core> [msg_translator.c:2777]: via_builder(): TCP/TLS connection (id: 0) for WebSocket could not be found Jan 30 18:19:31 ./kamailio[27857]: ERROR: tm [t_msgbuilder.c:1365]: assemble_via(): assemble_via: via building failed Jan 30 18:19:31 ./kamailio[27857]: ERROR: tm [t_msgbuilder.c:1545]: build_uac_req(): build_uac_req(): Error while assembling Via Jan 30 18:19:31 ./kamailio[27857]: ERROR: tm [uac.c:379]: t_uac_prepare(): t_uac: Error while building message So, Is it equivalent to connection ID missing? And is there any way to make Websocket found the connection? Btw, after proxy-restarting for seconds , I typed `sh kamctl stats` : websocket:ws_current_connections = 1 It showed that the WebRTC Client will re-connect automatically, So I think this connection could be found by proxy, Any suggestion? Thanks :)

2 3

[Serusers] Digest Authentication with Tenor DX
by Ashutosh Kumar 29 Apr '25

29 Apr '25

Hi, Does someone have any idea/experience with Quintum DX radius server's support for digest mode authentication. The Access-Request packets sent by SER are getting an error back. Guide. Regards, Ashutosh Kumar Chetu, Inc. Ph : 1(305) 402 6724 - Witin US Ph : 91 120 5323340 - Outside US Fax:1 (305) 832 5987 For more information, please visit http://www.chetu.com

2 1

Via header force change protocol to TLS?
by Anthony Alba 30 May '24

30 May '24

I have kamailio behind a TLS termination proxy so the sockets are correctly deduced to be TCP. However the clients only talk TLS to the proxy and are confused when the top Via header added by Kamailio is TCP. Is there a way for Kamailio to forcibly pretend its protocol is TLS? Like advertised_address but "advertised_protocol" instead. (With pjsip testing: it has a flag use_tls which ignores TCP from Kamailio and continues to use the persistent TLS transport to proxy. Linphone fails because it tries to honor TCP in Via and is unable to establish TCP transport). BTW I am using t_relay_to_tcp so Kamailio will return traffic to the proxy as TCP even though the contact addresses specify transport=TLS.

4 10

Dialog and DMQ on restart
by Björn Klasen 25 Mar '24

25 Mar '24

Hi everybody, I'm just testing Kamailio 5.4.1 with dialog replication over DMQ. This seems to work very good. Dialogs are replicated without problems. When I'm restarting one node I would have expected, that all dialogs are synced again, just like in dmq_usrloc. But this does not happen. After a restart the nodes dialog-list is empty. Did I miss somethin? Is there a special parameter that I have to set? BR, Björn -- Björn Klasen, Specialist TNG Stadtnetz GmbH, Network Management (VoIP) Projensdorfer Straße 324 24106 Kiel Germany T +49 431/ 530530 F +49 431/ 7097-555 mailto: bklasen(a)tng.de http://www.tng.de Register: Amtsgericht Kiel HRB 6002 KI Executive board (Geschäftsführung): Dr.-Ing. Volkmar Hausberg, Sven Schade, Carsten Tolkmit, Dr. Sven Willert Tax-Id (Steuernr.): 2029047020, VAT-Id (USt-Id): DE225201428

4 9

Is Min-SE check broken?
by harneet singh 31 May '23

31 May '23

Hi All, I am facing an issue in understanding how the min_se should be working in kamailio. As per the SST documentation, it seems like if the min_se is configured as 500, then any value of Session-Expires OR MIN-SE if lower than 500, can be responded to by a 422. However, I strangely see the reverse happening. To investigate further, I looked in to the ki_sst_check_min() code in the master, and these seems like a potential issue. Ref Code: Inside ki_sst_check_min(), there is an if condition like below: if (sst_min_se < MIN(minse, se.interval)) { However, shouldn't it be the other way around? ie if (sst_min_se > MIN(minse, se.interval)) { because we need to send 422 if the received value(in INVITE etc) is smaller than the sst configure min_se value? I also found a different documentation, at https://git.sgu.ru/oldssu/ex-opensips/blob/cb9df8d59dbb254a9d862569fd5d11f6… where the check is as below? if (sst_min_se > MIN(minse, se.interval)) { Can someone confirm if this is broken, or my understanding is incorrect? Regards, Harneet -- "Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth" - Sir Arthur Conan Doyle

2 3

Re: [SR-Users] TOPOS (5.1.[23]) breaks PRACK
by Daniel Tryba 02 May '23

02 May '23

On Mon, May 07, 2018 at 04:44:14PM +0200, Daniel Tryba wrote: > Sure. Attached. Problem appears to be that the topos query can't find > callid-totag (from the response). > > I'll try the same scenario with the mysql backend to see if it behaves > different. Config works fine with mysql as topos backend. So the bug is restricted to topos-redis.

5 19

enable topology hiding on one side or dynamic ip in topoh module Contact and Via Header
by Patrick Karton 17 Feb '23

17 Feb '23

Hello , im using kamailio with two interfaces external and internal. i need a way either to : * enable topoh hiding only when outgoing interface is external ( mask contact and Via ip only when ougoing interface is external * or if it is not possible to enable it only in one direction.i want to know how to configure dynamic(for example in xavp or avp) ip to put in Contact and Via when topoh is enabled. i see that the 'mask_ip' parameter of topoh module is a string. so we can not set a dynamic value here unfortunately. Thanks

4 8

Kamailio not responding after stress test
by Igor Olhovskiy 27 Jan '23

27 Jan '23

Hello, I'm continuing investigations on Kamailio and stress test. Got it again in the state where it's not accepting any new TCP/TLS connections (UDP still works though), but all looks good from lsof/netnstat part, like system is not reporting any zombie connections. Restart of Kamailio process helps This time I got output of kamctl trap Put it here: https://pastebin.com/iYrNZ8U9 kamailio --version version: kamailio 5.6.2 (x86_64/linux) 54a9c1 flags: USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, USE_RAW_SOCKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLOCKLIST, HAVE_RESOLV_RES ADAPTIVE_WAIT_LOOPS 1024, MAX_RECV_BUFFER_SIZE 262144, MAX_URI_SIZE 1024, BUF_SIZE 65535, DEFAULT PKG_SIZE 8MB poll method support: poll, epoll_lt, epoll_et, sigio_rt, select. id: 54a9c1 compiled on 14:01:01 Oct 18 2022 with gcc 4.8.5 It's statically linked with tlsa pointing on openssl-1.1.1q Settings related to TLS are: fork=yes children=4 tcp_children=12 enable_tls=yes tcp_accept_no_cl=yes tcp_max_connections=63536 tls_max_connections=63536 tcp_accept_aliases=no tcp_async=yes tcp_connect_timeout=10 tcp_conn_wq_max=63536 tcp_crlf_ping=yes tcp_delayed_ack=yes tcp_fd_cache=yes tcp_keepalive=yes tcp_keepcnt=3 tcp_keepidle=30 tcp_keepintvl=10 tcp_linger2=30 tcp_rd_buf_size=80000 tcp_send_timeout=10 tcp_wq_blk_size=2100 tcp_wq_max=10485760 open_files_limit=63536 Can you please help to read gdb output and understand where I missed in config? Thanks in advance! -- Best regards, Ihor (Igor)

3 7

Recover call in ringing state
by Devang Dhandhalya 04 Jan '23

04 Jan '23

Hello All I have below setup : SBC -> kamailio -> Media server(remote) -> web-client Call comes from sbc to kamilio and it relays to Remote server to end user, In Ringing state if remote server goes down then in kamailio there is any way to Recover that ringing call like we can generate new invite for other Remote server which is active state, for relaying call i am using dispatcher module.. I tried with tm.cancel RPC command but it works only if the remote server is running , when I crash the remote server at that time tm.cancel is not generating cancel to remote server. Please suggest if there is any other way to generate INVITE. Regards Devang Dhandhalya -- * <https://www.ecosmob.com/> * *Disclaimer* In addition to generic Disclaimer which you have agreed on our website, any views or opinions presented in this email are solely those of the originator and do not necessarily represent those of the Company or its sister concerns. Any liability (in negligence, contract or otherwise) arising from any third party taking any action, or refraining from taking any action on the basis of any of the information contained in this email is hereby excluded. *Confidentiality* This communication (including any attachment/s) is intended only for the use of the addressee(s) and contains information that is PRIVILEGED AND CONFIDENTIAL. Unauthorized reading, dissemination, distribution, or copying of this communication is prohibited. Please inform originator if you have received it in error. *Caution for viruses, malware etc.* This communication, including any attachments, may not be free of viruses, trojans, similar or new contaminants/malware, interceptions or interference, and may not be compatible with your systems. You shall carry out virus/malware scanning on your own before opening any attachment to this e-mail. The sender of this e-mail and Company including its sister concerns shall not be liable for any damage that may incur to you as a result of viruses, incompleteness of this message, a delay in receipt of this message or any other computer problems.

2 3

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users November 2022