sr-users March 2020

sr-users@lists.kamailio.org

64 participants
81 discussions

out of shm without any visible reason
by Juha Heinanen 12 Mar '20

12 Mar '20

K reported during about 90 sec period that it is out of shared memory: Feb 28 09:47:28 rox1 /usr/bin/sip-proxy[19725]: ERROR: tm [t_hooks.c:136]: insert_tmcb(): out of shm. mem Feb 28 09:47:28 rox1 /usr/bin/sip-proxy[19725]: ERROR: acc [acc_logic.c:394]: acc_onreq(): cannot register additional callbacks Feb 28 09:47:28 rox1 /usr/bin/sip-proxy[19725]: ERROR: <core> [core/sip_msg_clone.c:499]: sip_msg_shm_clone(): could not allocate shared memory from shm pool Feb 28 09:47:28 rox1 /usr/bin/sip-proxy[19725]: ERROR: tm [t_lookup.c:1293]: new_t(): out of mem: Feb 28 09:47:28 rox1 /usr/bin/sip-proxy[19725]: ERROR: tm [t_lookup.c:1439]: t_newtran(): new_t failed ... Feb 28 09:47:29 rox1 /usr/bin/sip-proxy[19725]: ERROR: <core> [core/mem/q_malloc.c:297]: qm_find_free(): qm_find_free(0x7f1f2a506000, 1232); Free fragment not found! Feb 28 09:47:29 rox1 /usr/bin/sip-proxy[19725]: ERROR: <core> [core/mem/q_malloc.c:434]: qm_malloc(): qm_malloc(0x7f1f2a506000, 1232); Free fragment not found! Feb 28 09:47:29 rox1 /usr/bin/sip-proxy[19725]: ERROR: tm [t_reply.c:1957]: relay_reply(): cannot alloc reply shmem Feb 28 09:47:29 rox1 /usr/bin/sip-proxy[19725]: ERROR: <core> [core/sip_msg_clone.c:499]: sip_msg_shm_clone(): could not allocate shared memory from shm pool Feb 28 09:47:29 rox1 /usr/bin/sip-proxy[19725]: ERROR: acc [acc_logic.c:562]: acc_onreply(): failed to clone the request - acc aborted ... Feb 28 09:48:51 rox1 /usr/bin/sip-proxy[19724]: ERROR: <core> [core/mem/q_malloc.c:297]: qm_find_free(): qm_find_free(0x7f1f2a506000, 5728); Free fragment not found! Feb 28 09:48:51 rox1 /usr/bin/sip-proxy[19724]: ERROR: <core> [core/mem/q_malloc.c:434]: qm_malloc(): qm_malloc(0x7f1f2a506000, 5728); Free fragment not found! Feb 28 09:48:51 rox1 /usr/bin/sip-proxy[19724]: ERROR: tm [t_lookup.c:1293]: new_t(): out of mem: Feb 28 09:48:51 rox1 /usr/bin/sip-proxy[19724]: ERROR: tm [t_lookup.c:1439]: t_newtran(): new_t failed And after that period it started working normally again and core.shmmem showed: { total: 134217728 free: 124173808 used: 9530960 real_used: 10043920 max_used: 134217728 fragments: 349 } As can be seen, shm had been full, but normally only about 10% of it is in use. Syslog does not show any traffic spikes or other unusual activity before the memory got full. Any ideas what could cause such a high memory usage or could there be a bug in shm management? -- Juha

5 35

unknown error messages
by Juha Heinanen 12 Mar '20

12 Mar '20

Any idea where this kind of error message could come from: Mar 12 07:16:17 rox2 /usr/bin/sip-proxy[32058]: CRITICAL: <core> [core/pass_fd.c:277]: receive_fd(): EOF on 61 Mar 12 07:16:17 rox2 /usr/bin/sip-proxy[32058]: ERROR: <core> [core/io_wait.h:607]: io_watch_del(): trying to delete already erased entry 61 in the hash(-1, 0, 0x7f689c16a868) flags 0) Mar 12 07:16:17 rox2 /usr/bin/sip-proxy[32058]: ERROR: <core> [core/io_wait.h:607]: io_watch_del(): trying to delete already erased entry 64 in the hash(-1, 0, 0x7f68c063b0f0) flags 0) Mar 12 07:16:17 rox2 /usr/bin/sip-proxy[32058]: CRITICAL: <core> [core/pass_fd.c:191]: send_fd(): sendmsg failed sending 79 on 64: Broken pipe (32) Mar 12 07:16:17 rox2 /usr/bin/sip-proxy[32058]: ERROR: <core> [core/tcp_main.c:4225]: send2child(): send_fd failed for 0x7f689c18a0b0 (flags 0x4018), fd 79 Debug does not give any hints. -- Juha

2 2

Topoh and dialog track_cseq_updates
by Aidar Kamalov 12 Mar '20

12 Mar '20

Hello, I am trying to increase cseq in invite with credentials to 401 Unauthorized, but with topoh.so module and mask_callid enabled it does not work. Are there any way to fix it? -- Aydar A. Kamalov

2 1

xhttp_prom - Adding new metrics for dispatcher list to monitor SIP trunk availability
by Jonathan Hunter 12 Mar '20

12 Mar '20

Hi Guys, We are running kamailio 5.3 in our dev environment with a view to using the xhttp_prom module, so that we can monitor using prometheous. It works fine in terms of getting all the internal stats and groups, however is it possible to grab the dispatcher.list output/stats using the module? I know there is a collector that does this and provides the dispatcher gateway trunk status, but wondered if it could be implemented using xhttp_prom, or if external code would be required to grab the states using rpc etc? Many thanks Jon

2 2

Re: [SR-Users] (no subject)
by Henning Westerholt 12 Mar '20

12 Mar '20

Hello, you need to provide some details about the errors (like output from log messages etc..) that we can help you here on this list. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: ahmed moghazy <ahmed.m.moghazi(a)gmail.com> Sent: Thursday, March 12, 2020 8:56 AM To: Henning Westerholt <hw(a)skalatan.de> Subject: Re: [SR-Users] (no subject) I want to know steps for that cause when i try this it give me error i dont know why ?! On Mar 11, 2020, at 10:21 AM, Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> wrote: Hello, this could be done with a database query (e.g. with sqlops module). If you are looking for a dedicated interface, there is for example the group module: https://kamailio.org/docs/modules/devel/modules/group.html Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-users <sr-users-bounces(a)lists.kamailio.org<mailto:sr-users-bounces@lists.kamailio.org>> On Behalf Of ahmed moghazy Sent: Tuesday, March 10, 2020 8:53 PM To: Kamailio (SER) - Users Mailing List <sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org>> Subject: Re: [SR-Users] (no subject) If i want to make users in groups for example two Groups group A and group B and each group has 4 users but users in group A couldn't Call users in group B? On Mar 3, 2020, at 10:36 PM, ahmed moghazy <ahmed.m.moghazi(a)gmail.com<mailto:ahmed.m.moghazi@gmail.com>> wrote: I generate those certificates and i put then in linphone source code i want to enable require_certficate=1 could you help me how and where to put the certificates and linphone peer return it ? , thank you On Mar 3, 2020, at 10:52 AM, M S <shaheryarkh(a)gmail.com<mailto:shaheryarkh@gmail.com>> wrote: Any sip client will work with kamailio (as sip server) as long as it supports TLS and configured correctly. I mostly use Linphone, Xlite and some of my own sip clients that i have built over the years. You simply need to follow the quick howto in tls module documentation (as i mentioned earlier) to generate client and server certificates. Then copy client cert along with CA to sip client, provide connection and authentication info and it should work fine. For over simplified setup where you don't have client certificate or not sure how to configure one for any given sip client, you can disable "verify_certificate" option in tls module. Hope this helps. On Tue, 3 Mar 2020, 08:53 ahmed moghazy, <ahmed.m.moghazi(a)gmail.com<mailto:ahmed.m.moghazi@gmail.com>> wrote: I know that but i want voip program to be used with kamailio using tls i you could suggest one , thank you Sent from my iPhone On Mar 3, 2020, at 5:54 AM, M S <shaheryarkh(a)gmail.com<mailto:shaheryarkh@gmail.com>> wrote: Dude again, RTFM! The TLS module has a quick how-to generate client and server certificates. Both must be issued by same CA and server must have all issued certificates along with CA, CRL and private key. The whole directory structure and what to put where is listed, along with how to configure kamailio. On Mon, 2 Mar 2020, 20:27 ahmed moghazy, <ahmed.m.moghazi(a)gmail.com<mailto:ahmed.m.moghazi@gmail.com>> wrote: I put my own certficate in /res/raw/rootca.pem in linphone Sent from my iPhone On Mar 2, 2020, at 7:40 PM, M S <shaheryarkh(a)gmail.com<mailto:shaheryarkh@gmail.com>> wrote: Please read the tls module documentation, https://kamailio.org/docs/modules/devel/modules/tls.html#tls.p.require_cert… when enabled it requires client to present certificate, but client does not have one, which is the likely cause of the problem. Hope this helps. On Mon, 2 Mar 2020, 14:34 ahmed moghazy, <ahmed.m.moghazi(a)gmail.com<mailto:ahmed.m.moghazi@gmail.com>> wrote: Hello sir , when i enabled tls module in kamailio and i made the configurations in tls.cfg, kamailio always sent me that peer dont return certificate when i make requre_certficate=1 _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users

1 0

Use topos module to hide contact in OPTIONS request
by Enzo 12 Mar '20

12 Mar '20

2 1

(no subject)
by ahmed moghazy 11 Mar '20

11 Mar '20

Hello sir , when i enabled tls module in kamailio and i made the configurations in tls.cfg, kamailio always sent me that peer dont return certificate when i make requre_certficate=1

3 8

secfilter not working for me
by Joli Martinez 10 Mar '20

10 Mar '20

I have a fresh install of Kamailio 5.2.5 on CentOS7. I am trying to install the secfilter module as per the link below https://www.kamailio.org/wiki/tutorials/security/kamailio-security When I restarted the service it is not finding the geoid or secfilter module. From what I was reading there are no dependencies or anything to install. What am I missing? ------------------------------------------------- Mar 10 16:30:47 kamailio01 systemd: Started Kamailio (OpenSER) - the Open Source SIP Server. Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/sr_module.c:487]: load_module(): could not find module <geoip2> in </usr/lib64/kamailio/modules> Mar 10 16:30:47 kamailio01 kamailio: CRITICAL: <core> [core/cfg.y:3508]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 300, column 15-25: failed to load module Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/sr_module.c:487]: load_module(): could not find module <secfilter> in </usr/lib64/kamailio/modules> Mar 10 16:30:47 kamailio01 kamailio: CRITICAL: <core> [core/cfg.y:3508]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 301, column 15-28: failed to load module Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/modparam.c:152]: set_mod_param_regex(): No module matching <secfilter> found Mar 10 16:30:47 kamailio01 kamailio: CRITICAL: <core> [core/cfg.y:3511]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 322, column 81: Can't set module parameter Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/modparam.c:152]: set_mod_param_regex(): No module matching <secfilter> found Mar 10 16:30:47 kamailio01 kamailio: CRITICAL: <core> [core/cfg.y:3511]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 323, column 43: Can't set module parameter Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/cfg.y:3371]: yyparse(): cfg. parser: failed to find command geoip2_match (params 2) Mar 10 16:30:47 kamailio01 kamailio: CRITICAL: <core> [core/cfg.y:3511]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 614, column 38: unknown command, missing loadmodule? Mar 10 16:30:47 kamailio01 kamailio: ERROR: bad config file (6 errors) Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/pvapi.c:915]: pv_parse_spec2(): error searching pvar "gip2" Mar 10 16:30:47 kamailio01 kamailio: ERROR: <core> [core/pvapi.c:1119]: pv_parse_spec2(): wrong char [s/115] in [$gip2(src=>cc)] at [6 (5)] Mar 10 16:30:47 kamailio01 kamailio: CRITICAL: <core> [core/cfg.y:3508]: yyerror_at(): parse error in config file /etc/kamailio/kamailio.cfg, line 615, column 36-49: Can't get from cache: $gip2(src=>cc)

2 1

Kamailio TLS
by Mike Nasr 10 Mar '20

10 Mar '20

Dear Hope all is well. Can i trouble you with pointing me to the right tutorial for properly adding tls on any version of Kamailio. i have been trying for days, all versions and method i can find on the internet, even build from source and changed openssl version as suggested by one of the threads in the mailing list still without any luck. apologies for not providing any references as i am sending this email from my colleague machine. Thanking you in advance Mike Nasr ICT Consultant mikenasr.com

2 1

Re: [SR-Users] Thank you --- Compilation success
by Henning Westerholt 09 Mar '20

09 Mar '20

Hello, (moving discussion to users list) have a look to the Kamailio log files to see the actual errors, maybe there is a path not correct. You can also execute Kamailio with logging to stdout (have a look to the parameter visible with kamailio -h). Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: subhra giri <subhraprakash79(a)gmail.com> Sent: Monday, March 9, 2020 12:20 PM To: Henning Westerholt <hw(a)skalatan.de> Cc: sr-dev(a)lists.kamailio.org Subject: Re: Thank you --- Compilation success Dear Henning Sure, will do that. But after running kamailio on the mips board i am getting below error. /bin/kamailio-5.3.2/src # ./kamailio loading modules under config path: /usr/lib/kamailio-5.3.2/src/modules/ ERROR: bad config file (45 errors) I have attached config file. Please help me what is wrong in this config file. Thanks and regards Subhra Prakash On Mon, Mar 9, 2020 at 3:27 PM Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> wrote: Hello Subhra, Great! Could you share the here steps that lead to the success that others might be able to learn from it as well? Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: subhra giri <subhraprakash79(a)gmail.com<mailto:subhraprakash79@gmail.com>> Sent: Saturday, March 7, 2020 11:18 AM To: Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> Subject: Thank you --- Compilation success Dear Henning Compilation is successful for MIPS. Thank you very much Subhra Prakash Giri On Sat, Mar 7, 2020 at 1:26 PM subhra giri <subhraprakash79(a)gmail.com<mailto:subhraprakash79@gmail.com>> wrote: Dear Henning I tried to compile directly on MIPS board, but there is no make file in my board. so it is not compiling. I am not getting Make for MIPS board. Is there any other way to compile on x86 for mips board. Thanks and Regards Subhra Prakash Giri On Fri, Mar 6, 2020 at 6:43 PM Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> wrote: Hi Subhra, I meant with native platform – to test compilation directly on the MIPS board, not sure if you understood it the same way. Cheers, Henning From: subhra giri <subhraprakash79(a)gmail.com<mailto:subhraprakash79@gmail.com>> Sent: Friday, March 6, 2020 1:11 PM To: Henning Westerholt <hw(a)skalatan.de<mailto:hw@skalatan.de>> Cc: sr-dev(a)lists.kamailio.org<mailto:sr-dev@lists.kamailio.org> Subject: Re: [sr-dev] Regarding MIPS Compilation Dear Henning Executing "make cfg " gives below output [root@www kamailio-5.3.2]# make cfg make -C src/ cfg target architecture <mips64>, host architecture <x86_64> ---------------------------------------------------------------------------------------------------------------------------------------------------------- In native platform it is compiling successfully. But giving problem for target platform i.e mips64-octeon-linux. Please help me with steps for mips compilation Thanks and Regards Subhra Prakash Giri

1 0

← Newer
1
2
3
4
5
6
7
8
9
Older →

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users March 2020