sr-users September 2017

sr-users@lists.kamailio.org

86 participants
123 discussions

by Ram

Hi, I need to enable sigcomp with kamailio. Can any one guide me how proceed with that. And its ok to integrate any third party tools like libsigcomp for the same. Regards Raman

6 years, 6 months

Kamailio htable mod-init route: Main process exited before writing to pipe

by George Diamantopoulos

Hello all, I've been trying to utilise event_route[htable:mod-init] in order to load information from the database into an htable on startup. However, Kamailio exits with an error for no obvious (to me) reason. Here's the log output: DEBUG: htable [htable.c:226]: child_init(): rank is (-127) DEBUG: htable [htable.c:259]: child_init(): executing event_route[htable:mod-init] (2) DEBUG: <core> [core/parser/msg_parser.c:600]: parse_msg(): SIP Request: DEBUG: <core> [core/parser/msg_parser.c:602]: parse_msg(): method: <OPTIONS> DEBUG: <core> [core/parser/msg_parser.c:604]: parse_msg(): uri: < sip:you@kamailio.org> DEBUG: <core> [core/parser/msg_parser.c:606]: parse_msg(): version: <SIP/2.0> DEBUG: <core> [core/parser/parse_via.c:2639]: parse_via(): end of header reached, state=2 DEBUG: <core> [core/parser/msg_parser.c:491]: parse_headers(): Via found, flags=2 DEBUG: <core> [core/parser/msg_parser.c:493]: parse_headers(): this is the first via ERROR: <core> [core/daemonize.c:303]: daemonize(): Main process exited before writing to pipe And here's the routing block in kamailio.cfg. What I need to do is get the username for all non-expired contacts in the "location" table, perform a query on another database for each one of them and store the result in an htable: event_route[htable:mod-init] { sql_pvquery("ck", "select username from location where now() <= expires", "$avp(registered_ng)"); $var(i) = 0; while ( $(avp(registered_ng)[$var(i)]) != $null ) { sql_pvquery("ca", "select property from tablename where username = $(avp(registered_ng)[$var(i)])", "$var(ng_property)"); $sht(isnguser=>$var(ng_property)) = 1; $var(i) = $var(i) + 1; pv_unset("$var(ng_property)"); } pv_unset("$var(i)"); } Any hints as to what I might be doing wrong? Thanks! Best regards, George

6 years, 6 months

Hello

by Subba Krishna MG

Hello, i am using Kamailio for SIP Presence server. When ever the Presence PUBLISH is received on kamailio, kamailio is sending 200 OK with out Expires IE. I want Kamailio to send Expires IE with 200 OK. How do i modify it. Can you please help me in this regard. Thank u MGSK

6 years, 6 months

Retrieve remote IP and port

by Iskren Hadzhinedev

Hi list, How can I reliably get the sender’s IP address? |$si| and |$sp| are returning the server IP and Port. I also tried using |$Ri| and |$Rp| but it yields the same results. Inspecting the packet shows the sender’s true IP:Port pair in the |Via:| header, but the |From:| and |To:| contain the kamailio server’s public IP address. Kind regards, -- /Iskren Hadzhinedev/

6 years, 6 months

Perl module missing in kamailio 5.0.3

by Ginhoux, Patrick

Hi, I'm thinking to upgrade my kamailio 5.0.1 running on a Rhel 7.1 server to 5.0.3 . Looking at the repository for Rhel7 to download the rpm, I don't find the perl rpm. For 5.0.1, it is kamailio-perl-5.0.1-1.1.x86_64.rpm. Can you help to get it for 5.0.3 ? Thanks in avance. Cordialement Patrick GINHOUX

6 years, 6 months

how to debug kamailio c code

by Sergey Safarov

I have issue with kazoo module call sprintf <https://github.com/kamailio/kamailio/blob/master/src/modules/kazoo/kz_pua.c…> not work properly. body variable contains values like \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 Must be XML string <?xml version="1.0" encoding="UTF-8"?><presence xmlns="urn:ietf:params:xml:ns:pidf" xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model" xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid" xmlns:c="urn:ietf:params:xml:ns:pidf:cipid" entity="2496"> <tuple xmlns="urn:ietf:params:xml:ns:pidf" id="t8No1hQnp65U33jS1oqFMgxbIRPq-iFP"><status><basic>open</basic></status></tuple><note xmlns="urn:ietf:params:xml:ns:pidf">On the Phone</note><dm:person xmlns:dm="urn:ietf:params:xml:ns:pidf:data-model" xmlns:rpid="urn:ietf:params:xml:ns:pidf:rpid" id="1"><rpid:activities><rpid:on-the-phone/></rpid:activities><dm:note>On the Phone</dm:note></dm:person></presence> But i cannot find/understand where is must be executed conversion hex2string I want use gdb inspect memory vars but i cannot. Please advice how to do it.

6 years, 6 months

Re: [SR-Users] Question about Kamailio Performance

by Jiankai Zhu

Thank you guys for your quick response. I am new to Kamailio so all your information are very helpful for me. My setting: children=8 in kaimailio.cfg . I did not change it and leave it by default on my 4 cores system. My thought: I think it may related to Mysql since cpu and iowait is low and the problem happens only when I add more subscribers to mysql database. I will try according to : 1: Dmitri combination of mysql and htable as mysql cache 2: Mathias tune MySQL server 3: I think ram database should help on this. But it seems these is little document on redis. I am looking into SQLite3 memory mode but if there is any related reference / link will be appreciated. Thanks with regards, David David 2017年9月28日下午02:59，Daniel-Constantin Mierla <miconda(a)gmail.com> 写道： Hello, it seems that interaction with mysql is a bottleneck. What is the value of children parameter in kamailio.cfg? Cheers, Daniel On 28.09.17 04:00, Jiankai Zhu wrote: My goal: make sure when using kamailio as engine I can achieve: on systems with 4GB memory, Kamailio can serve a population over 300 000 online subscribers <from: https://www.kamailio.org/w/features/ > Test bed: CPU: 4 cores , 4G RAM Kamailio 5 with Mysql. Test source：another server running SIPp 10k subscriber in Mysql . 6000 Register Per Second , reuse 10k user to register , it works fine. If register 50 every second for per user it seem 300 k subscribers should work. (about 300% cpu used of totally 400% cpu. All requests finished without retransmit and fail. ) add 90k subscriber into Mysql . 100k subscirbers in Mysql . 1000 Register Per Second , a lot of failure and can not work . (cpu are not used much at that time. IO is not high.) My question : What is the root cause of bad performance when there is 100k subscribers' data in the Mysql database. How can I deploy a kamailio with 300k subscriber in database, and support 6000 register per second at the same time ? Maybe use ram database instead of Mysql? Thanks with regards, David _______________________________________________ Kamailio (SER) - Users Mailing List sr-users(a)lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla www.twitter.com/miconda -- www.linkedin.com/in/miconda Kamailio Advanced Training - www.asipto.com Kamailio World Conference - www.kamailioworld.com

6 years, 6 months

mysql installation error

by Timothy oladapo olawuyi

Dear All, Please help me with error messages. Am trying to configure kamailio MYSQL as DBEGINE base on the tutorial available in the SIP ROUTING WITH KAMAILIO book, when I executed the /usr/local/sbin/kamdbctl create and got the Error messages below. ERROR: could not load the script in /usr/local/lib64/kamailio//kamctl/kamdbctl.mysql for database engine MYSQL ERROR: database engine not loaded - tried 'MYSQL' Here this the version of kamailio I installed. ./kamailio -I. Print out of kamailio internals Version: kamailio 4.4.6 (x86_64/linux) 75f13d Default config: /usr/local/etc/kamailio/kamailio.cfg Default paths to modules: /usr/local/lib64/kamailio/modules Compile flags: STATS: Off, USE_TCP, USE_TLS, USE_SCTP, TLS_HOOKS, DISABLE_NAGLE, USE_MCAST, DNS_IP_HACK, SHM_MEM, SHM_MMAP, PKG_MALLOC, Q_MALLOC, F_MALLOC, TLSF_MALLOC, DBG_SR_MEMORY, USE_FUTEX, FAST_LOCK-ADAPTIVE_WAIT, USE_DNS_CACHE, USE_DNS_FAILOVER, USE_NAPTR, USE_DST_BLACKLIST, HAVE_RESOLV_RES MAX_RECV_BUFFER_SIZE=262144 MAX_LISTEN=16 MAX_URI_SIZE=1024 BUF_SIZE=65535 DEFAULT PKG_SIZE=8MB DEFAULT SHM_SIZE=64MB ADAPTIVE_WAIT_LOOPS=1024 TCP poll methods: poll, epoll_lt, epoll_et, sigio_rt, select Source code revision ID: 75f13d Compiled with: gcc 4.9.2 Compiled on: 10:56:51 Sep 28 2017 Thank you for flying kamailio! Regards Olawuyi Timothy Oladapo | IT/VAS Operation | Information System Dept |Pethahiah Rehoboth INTL. Limited | 2nd Floor Rubby Block All seasons Plaza , Lateef Jakande Rd, Agidingbi, Ikeja, Lagos. | Mobile: +2348052612001,+2348098797928 |Skype: daptims | <htttp://www.pethahiah.com/> htttp://www.pethahiah.com

6 years, 6 months

How to do replace_body_all with Kemi python version kamailio 5.0.x

by Muhammad Zaka

Hi We are experiencing issue with python script KSR. textops.replace_body_all using branch 5.0.2: - Example Code: KSR.textops.replace_body_all("a=sendonly", "a=sendrecv") It looks like that the module textops and textopsx are not available. Using $rb or $msg(body) pseudo variables isn't working as they are readonly. Is there any other way to replace the body? Many Thanks Regards Muhammad Zaka

6 years, 6 months

CentOS 7 TLS Unable to set the memory allocation functions

by Ryan Wagoner

I had this issue with CentOS 7.3 and chalked it up to the openssl 1.0.1e bug mentioned on the list https://lists.kamailio.org/pipermail/sr-users/2013-August/079381.html However I just updated to CentOS 7.4 with openssl 1.0.2k-8 and the issue still exists with Kamailio 4.4.6-2.2. I've tried moving the loadmodule "tls.so" to the top as well. ERROR: tls [tls_init.c:526]: tls_pre_init(): Unable to set the memory allocation functions ERROR: tls [tls_init.c:528]: tls_pre_init(): libssl current mem functions - m: 0x7fc56d19c0c0 r: 0x7fc56d19c5a0 f: 0x7fc56d19c4c0 ERROR: tls [tls_init.c:530]: tls_pre_init(): Be sure tls module is loaded before any other module using libssl (can be loaded first to be safe) Does anybody have TLS working with RHEL 7 or CentOS 7? Thanks, Ryan

6 years, 6 months

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2017