sr-users September 2016

sr-users@lists.kamailio.org

87 participants
127 discussions

Configuring/Integrating Kamailio Open IMS with FHoSS
by Olvera, Victor 04 Nov '16

04 Nov '16

How does one configure Kamailio Open IMS and FHoSS? In other words, how does one configure IMS and FHoSS so that when soft calls are made they must be processed by the FHoSS before they go through the Open IMS server? Great regards, Victor Olvera

8 13

Permissions module question
by Ivan Dudko 11 Oct '16

11 Oct '16

Hello! I am new to kamailio and trying to use it vanilla config. Now main question is how to use ip based auth. I found recent post of Daniel-Constantin Mierla: http://lists.sip-router.org/pipermail/sr-users/2011-December/071147.html Here he recommends to use 'address' table from permissions module, I try yo use advice and add this lines at config begin: #!define WITH_MYSQL #!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" #!define WITH_AUTH #!define WITH_IPAUTH #!define WITH_USRLOCDB Database is created and kamailio can access it. I am add user 1000 to kamailio via kamctl and successful register it with soft-phone. I create trunk without registration to kamailio on asterisk server. And trying to call from asterisk to user 1000. Call is successful. I try to create file /etc/kamailio/permissions.deny with content 'ALL : ALL'. And retry previous call. It still sucessful. I try to add record with asterisk address to 'address' table with group 1. And retry previous call. It still sucessful. I am confused. I do not now how to disable any address for ip_auth except if it in the 'address' table. And allow any address with if it request kamailio with registration. -- Best Regards, Ivan Dudko

3 4

Kamailio - DMQ dns srv Question
by José Seabra 11 Oct '16

11 Oct '16

Hello, I have a doubt related with DMQ dns behavior, I noticed that when kamailio starts, it tries to resolve DMQ name configured on parameter notification_address as the following sequence: 1. SRV 2. A 3. AAAA Isn't supposed kamailio try first resolve the NAPTR DMQ name, and then SRV? I'm asking this because kamailio is trying resolve the SRV record without any transport protocol specified on query, as my dns server only accepts queries on the format "_Service._Proto.Name" the SRV will never be resolved. Thank you. BR -- José Seabra

4 13

Kamailio stop processing SIP
by Igor Potjevlesch 07 Oct '16

07 Oct '16

Hello, Someone has an idea? Again, Kamailio stop processing SIP during more than 30s. Nothing print in the logs. The processing back on when a script detect no answer and restart the service. Regards, Igor. De : Igor Potjevlesch [mailto:igor.potjevlesch@gmail.com] Envoyé : vendredi 23 septembre 2016 11:05 À : sr-users(a)lists.sip-router.org Objet : Dimension number of child Hello, I'm wondering if there's a best practise to dimension the number of child to setup? I see, very often, Kamailio that stops to reply to SIP traffic for couple a seconds. This cause some calls drop if RE-INVITE are not processed for example. So, I'm wondering if the issue is not due to a lack of child for processing the SIP traffic. Thank you for your inputs. Regards, Igor.

3 6

Migrating from OpenSER config file question.
by Brian McCrary 07 Oct '16

07 Oct '16

Hello group, I know this may be hard to believe but I'm in the process of upgrading an old, but stable, OpenSER 1.0 group of servers to Kamilio. I'm basically going to sort of start from scratch with the database and export my old MySQL database and write some scripts to reimport the data using kamctl scripts since the database structure has changed substantially since then it looks like. I've mostly migrated the config file over fairly easily, except for AVPops. I've got a section of config file that writes into the usr_preferences database for call forwarding, but I seem to get the same error anywhere I try to write to the database using AVPops. Here's the output I get when checking the config: 0(1378) DEBUG: <core> [pvapi.c:268]: pv_cache_add(): PV cache not initialized, doing it now 0(1378) ERROR: <core> [pvapi.c:828]: pv_parse_spec2(): error searching pvar "avp" 0(1378) ERROR: <core> [pvapi.c:1032]: pv_parse_spec2(): wrong char [s/115] in [$avp(s:callfwd)] at [5 (5)] 0(1378) : <core> [cfg.y:3368]: yyerror_at(): parse error in config file /usr/local/etc/kamailio/kamailio.cfg, line 145, column 4-18: Can't get from cache: $avp(s:callfwd) ERROR: bad config file (1 errors) Here's what I think are the revelant portions of the config file: modparam("avpops", "db_url", "mysql://user:pass@localhost/kamailio") modparam("avpops", "avp_table", "usr_preferences") modparam("avpops", "uuid_column", "uuid") modparam("avpops", "username_column", "username") modparam("avpops", "domain_column", "domain") modparam("avpops", "attribute_column", "attribute") modparam("avpops", "value_column", "value") modparam("avpops", "type_column", "type") <snip> if (avp_db_load("$from/username", "$avp(s:callfwd)")) { if(!avp_db_delete("$from/username", "$avp(s:callfwd)/usr_preferences")) { sl_send_reply("500", "Server DB error"); } } # avp_write("$ruri","$avp(s:callfwd)"); # Old OpenSER 1.0 syntax... $avp(s:callfwd) = $ruri; # New Kamailio syntax ?? avp_db_store("$from/username","$avp(s:callfwd)/usr_preferences"); t_relay(); return; Basically I just want to write the ruri into the usr_preferences database with an attribute of callfwd but not sure what I'm missing. I see the error "Can't get from cache" but not sure how that pertains to what I'm trying to do. Anyone have any ideas? Thanks, Brian

2 5

Load balancing with Kamailio
by Nitesh Bansal 06 Oct '16

06 Oct '16

Hello, I'm planning on doing some smart load balancing with Kamailio. We have a distributed network, with multiple Kamailio boxes in different locations serving as Ingress SBC, these Kamailio boxes are the entry point for a SIP call and then they route the call to a pre-configured Asterisk boxes. I want to move away from this, I would like these Kamailios to be able to distribute the traffic to Asterisk boxes based on the actual load on these boxes, the goal is to be more dynamic? Is there any Kamailio module which could do that? Do I need to integrate some other tool(Homer etc) with Kamailio to achieve this? Any suggestions are welcome. -- *Nitesh Bansal* Business Development Engineer http://www.voxbone.com/

2 1

Serial Forking and t_suspend
by Kelvin Chua 06 Oct '16

06 Oct '16

we have serial forking already setup properly but need to t_suspend(). found out that it completely breaks the destination set. other than manually rebuilding the destination set after t_continue(), are there any other solution out there? Kelvin Chua

2 1

Addressing a distinct PSI result is: 555 AS Contacting Failed - iFC terminated dialog
by Valentin Christoph 05 Oct '16

05 Oct '16

Hi all, I'm trying to send a call to an AS via a kamailio S-CSCF (release 4.4.3). I'm addressing the AS by a distinct PSI: sip:04325432101@domain.net;user=gsmr. At the first try the S-CSCF sends a SAR to HSS and receives a successful SAA (tshark traces attached), but the S-CSCF rejects the call with 555 AS Contacting Failed - iFC terminated dialog. At the second try (a few seconds later), the S-CSCF doesn't exchange SAR/SAA with the HSS, and now the call is successfully forwarded to the AS. This problem is permanent, it is not the result of a temporary loss of connectivity between S-CSCF and AS. I checked the iFCs that I had configured at the HSS and I think, they are OK. I attached - tshark traces from the node, where the S-CSCF resides: 2016_09_19_error_555_17_scscf_filtered.pcap - WITH_DEBUG logs from kamailio: 2016_09_19_error_555_17_kamailio_1st_try.log - A tarball of /usr/local/etc/kamailio: 2016_09_19_error_555_17_kamailio.tar.gz Can anybody help? Is it a bug in kamailio or is the problem on my side? Thanks, Christoph The information contained in this e-mail message is privileged and confidential and is for the exclusive use of the addressee. The person who receives this message and who is not the addressee, one of his employees or an agent entitled to hand it over to the addressee, is informed that he may not use, disclose or reproduce the contents thereof, and is kindly asked to notify the sender and delete the e-mail immediately.

2 4

Sip Proxy server_kamailio Features
by Surender Singh 03 Oct '16

03 Oct '16

Hello, Thanks to all to develop the such type Sip Proxy server. Please suggest whether SIP proxy server is open source ,If yes than it can fulfil the my below requirement . 1) I having some sip clients which are registered on IMS .Can I use the kamailio Sip proxy sever between sip client and IMS. Sip client ------------------Kamailio Sip Proxy ---------------IMS 2) Second things, can I use Kamailio Sip Proxy to interconnect two IMS nodes . Can I create the SIP trunk without registration mode (username and password) between IMS nodes using Kamailio. Because the my IMS node doesn't support sip trunk in registration mode. Its support one normal trunk (SIP-T) My current IMS set up like below. IMS-1 (IBCF)---------------IMS2(IBCF). Regards Surender Singh ::DISCLAIMER:: ---------------------------------------------------------------------------------------------------------------------------------------------------- The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only. E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates. Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of this message without the prior written consent of authorized representative of HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately. Before opening any email and/or attachments, please check them for viruses and other defects. ----------------------------------------------------------------------------------------------------------------------------------------------------

2 1

Call forking priority
by Igor Potjevlesch 30 Sep '16

30 Sep '16

Hello list, I have a proxy that manage fix calls and a proxy that manage mobile calls. I want to implement call forking so when I call to a fix phone the call goes to the fix proxy and it forks to the mobile proxy who manage the call and viceversa. I want the fix to ring 2 or 3 times before the mobile. In order to do so I relay first to the fixed proxy, which will bounce back to mobile proxy the branch for mobile device. But now if I want to be able to choose which phone (mobile or fixe) rings before I have tried by doing the "async_route("RELAY", "7");" in the fixe proxy like in the mobile proxy but it doesn't work. My code is: Fix proxy: if($rU==123456789){ add_diversion("forking"); $var(priority)=1; append_branch("sip:987654321@proxy_mobile"); } route[INVITE]{ if($var(priority) == "1"){ async_route("RELAY", "7"); }else{ route(RELAY); exit; } Mobile proxy: if($tU==987654321){ $rU=123456789; } route[INVITE]{ if($dir == "forking"){ async_route("RELAY", "7"); }else{ route(RELAY); exit; } } Thanks.

2 2

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

2002

sr-users September 2016